Winnebago Flip-Down Screen TV/DVD Video Players User manual

FLIP-DOWN SCREEN VIDEO
PLAYERS
(Rear Bunk models only)
–If Equipped
The flip-down LCD screen DVD
Video Players are mounted overhead in
each of the bunk beds.
The Video Players operate
independently so the occupant of one
bunk may watch a DVD while the other
watches a different DVD. The players
each contain auxiliary audio-video
inputs for connection of a video game
system or other audio-video equipment
if desired.
Remote Control and
Wireless Sound
•A
sensor
array
above
the screen of each Video Player
receives command signals from the
remote control.
• The sensor array also continuously
transmits wireless sound signals for
reception on IR wireless
headphones.
• SeeVideoPlayerinstructionguidein
your InfoCase for remote control
instructions and additional
informationonwirelessheadphones.
12-Volt Master
Power
• The Video Players
operate on 12-volt DC
current. Turn on the
12-Volt master power
(TV) switch shown, located on the
back wall of the top bunk.
NOTE:To avoiddrainonthe12-Volt
house battery, we recommend
turning the master power switch off
when Video Players will not be in
use.
Video Player Power ON/OFF
• Press the POWER button
on either the remote
controlortheunit once to
turn the power on. Press
the same button to turn
the player off.
• Push the open button (located on the
front of your screen) and lower the
monitor to the desired level. You
may also adjust the swivel angle.
To Play DVD
• Insert the DVD
label side down
(facing you) into
theslotontheside
of the player. The
player will automatically switch to
DVD mode. The screen will display
the DVD logo and begin to read the
disc.
• The DVD may load directly to the
main title/menu screen or it may
begin to play previews. You may be
able to skip previews if desired by
pressing the “NEXT” button on the
remote until you see the main menu
screen.
• Whenthemainmenuscreenappears,
press the PLAY button on the player
or ENTER button on the remote
control to begin playing the feature,
or use the arrow buttons to select the
desired entry.
• Volume is adjusted with the +/-
buttons on the player or the remote
control.
To Play CD Audio (or CD
Video)
• The Video Player is also capable of
playing CD Audio music and CD
Video discs.
POWER
AV MENU
POWER
Continued—

Audio-Video System
Basic Operation
Guide
Part No. 161501-09-020
0902080331
Copyright 2008 Winnebago Industries, Inc.
All rights reserved.
NOTE: See your InfoCase for specific
operating guides for audio and
video components.
Flip-Down Screen TV/DVD
Video Players
Rear Bunk models only
–If Equipped
• Insert the CD label side down
(facing you) into the slot on the side
of the player. The player will
automatically switch to proper
mode to play audio or video CD.
To Connect Game Systems
or Other A/V Components
• Plug the
audio and
video cables
of the game
system or component into the audio-
video input jacks at the rear
underside of the Video Player.
• Switch the game system or
component ON.
• Press AV button on Video
Playertoselect.VIDEO1or
VIDEO 2 input. (The
component logo or other
indication may appear on
screen when proper input is
selected).
• Operategamesystemor component
using the component’s controller(s).
• See Video Player instruction guide
in your InfoCase for more
information.
Reading Lights
• Push the light button to
turn the reading lights
on and off.
AV