WINNLOGY FX-8 User manual

USER MANUAL
DASH CAM WINNLOGY FX-8
www.winnlogy.com

Dear valued customer!
Thanks for buying our dashboard camera. We are sure
that your new dash-cam WINNLOGY FX-8 will be the
very best solution to your needs, for years to come!
We appreciate you, and we'd love to hear your honest
feedback of your experience with your purchase. Our
goal is your satisfaction, so please help us to help you,
by providing a review of the product and/or purchasing
experience.
Please, do not hesitate to contact us for any questions
you may have as to the use of our FX -8 camera.
We are prepared to respond to inquiries and requests
24/7.
Here is a convenient link to our site:
www.winnlogy.com/[e-mail]
Be safe, all the best to you, and thanks again for your
patronage.
Best regards TEAM WINNLOGY

Write a customer
review
Leave Seller
Feedback

For Your Safety
To prevent damage to your WINNLOGY product or injury
to yourself or to others, read the following safety
precautions in their entirety before using this equipment.
Keep these safety instructions where all those who use the
product will read them.
The consequences that could result from failure to observe
the precautions listed in this section are indicated by the
following symbol: Failure to comply with safety warnings
and regulations can result in serious injury or death.
This icon marks warnings. To prevent possible
injury, read all warnings before using this
WINNLOGY product.
WARNINGS
WINNLOGY Dash Cam is not intended to be touched,
modified, or calibrated while operating a vehicle.
- 1 -

WINNLOGY is not responsible for any damages resulting
from the user's misuse of the camera.
Do not use damaged power cords or plugs, orloose
electrical sockets. Faulty connections can cause
electric shock or fire
Do not touch the car charger with wet hands or
disconnect the charger by pulling the cord. Doing so
may result in electrocution.
Do not use a bent or damaged car charger. Doing
so may cause electric shock or fire.
Do not use your device while it is charging or touch
your device with wet hands. Doing so may cause
electric shock.
Do not short-circuit the charger or the device. Doing
so may cause electric shock or fire, or cause the battery to
malfunction or explode.
Use only manufacturer-approved, chargers,
accessories, and supplies.
- 2 -

Using conventional chargers may shorten the life of
your device or cause the device will not work correctly.
They can also cause a fire or cause damage to the
processor or batteries.
Using an incompatible charger can lead to serious
injury or damage to your device.
Do not drop the charger or device, or subject them to
impact. Handle and dispose of the charger and device with
care.
Never crush or puncture the device.
Never dispose of the device in a fire.
Never place the device in or on heating devices,
such as microwave ovens, stoves, or radiators. The device
may explode if overheated. Follow all local regulations
when disposing of a used device.
Protect the device and charger from damage.
- 3 -

Do not subject the unit to excessive cold or heat the
extremes. Temperature can damage the device and
the life of your device.
Do not allow children or animals to bite or chew the
device. Doing so may cause fire or explosion, and
small parts may be suffocating danger.
Failure to follow the precautions and rules may result in
property damage, serious injury or death.
Do not use the device near other electronic devices.
Most electronic devices use radio frequency signals.
Your device may interfere with other next to electronic
devices.
Do not use the device near other devices that emit
radio signals, for example sound systems or a radio
tower. Radio signals from them can lead to devices for
failure.
- 4 -

Do not expose the unit to strong smoke or fumes.
This can result in damage to the Outside the device
or cause it to malfunction.
If you notice strange odors or sounds coming from
your device, orif you see smoke from thedevice, stop using
the device, contact support.winnerstar.com immediately.
Failure to observe this precaution could result in a fire or
explosion.
For your own safety, do not use the controls of this
device while driving. When using the recorder in a
car, a window fastening is required. Make sure that you put
the recorder in a place where it will not interfere with the
driver's review.
Always keep the camera lens clean and make sure the lens
is not is blocked by any object or placed next to any
reflective material. If the car the windshield is tinted with a
dark coating, the recording quality may deteriorate.
Do not store the device in excessively hot, cold, wet
or dry places. This may cause a malfunction of the
device.
- 5 -

It is recommended to use your device in the temperature
range from -20°C to 70°C -4°F to 158°F.
Install mobile devices and equipment with care.
Do not place the device or accessories in or near the
airbag scope of deployment. Incorrectly, installed
wired equipment can cause serious injury in a situation
where airbags quickly swell.
Do not drop the device or expose it to the device. If
the device bending, deformation or damage, a
malfunction may occur.
Do not attempt to disassemble, repair or modify
device.
Do not attempt to make changes or changes to the
device, these actions will automatically remove the
manufacturer's warranty. If your device needs maintenance,
please contact us by e-mail support.winnerstar.com
- 6 -

Clean the device and the charger by wiping it with a
cloth. Do not use chemicals or detergents. This can lead to
discoloration or erosion and may result in electric shock or
fire.
Correct disposal of this product
Applicable in countries with separate waste collection
systems.
This symbol, found on the device, accessories or
accompanying literature, indicates that the product and its
electronic accessories (e.g. charger, headset, and USB
cable) should not be disposed of with other household
waste. To prevent possible harm to the environment or
human health from uncontrolled waste disposal, please
separate these items from other types of waste and recycle
them responsibly to promote the sustainable reuse of
material resources.
Household users should contact either the retailer where
they purchased this product, or their local government
office, for information on where and how they can take
- 7 -

These items for environmentally safe recycling. Business
users should contact their supplier and check the terms and
conditions of the purchase contract. This product and its
electronic accessories should not be mixed with other
commercial wastes for disposal.
Notices
No part of the guides included in this the product can be
reproduced, transmitted, transcribed, stored in a search
engine or translation into any language in any form, in any
way, without WINNLOGY written permission.
• WINNLOGY reserves the right to change equipment
specifications and The software described in these guides
•WINNLOGY will not be held liable for any damages
resulting from the use of this product
Although all efforts have been made to ensure that the
information in these guides are accurate and complete, we
I would be grateful if you would mistakes or omissions,
please contact us at [e-mail]
- 8 -

• The default applications supplied with the device are
subject to updating and possible termination of support
without prior notice. If you have any questions about the
application that came with your device, contact an
authorized support service at [e-mail]
Introduction
This chapter covers information you will need to know
before using the camera, including the names of camera
parts, how to use the camera menus, and how to ready the
camera for use.
For the latest version of this manual, refer to the
WINNLOGY website at www.winnlogy.com.
Available functions and additional services may vary
depending on the device and the software.
Applications and their functions may vary depending on
the country, region or equipment specifications.
WINNLOGY is not responsible for performance problems
caused by applications from any provider, other than
WINNLOGY.
- 9 -

WINNLOGY is not responsible for performance or
incompatibility problems caused by the device cannot be
installed as specified in this manual. Trying to set up
installation may result in improper operation of the device
or applications, which may cause lead to a malfunction of
the device and damage or loss of data. These actions
violation of your WINNLOGY agreement and void your
warranty.
Contents
CAMERA OVERVIEV……………………….11
PRODUCT SPECIFICATIONS………………12
INSTALLATION….....................................13-14
BUTTONS……………………………………15
WHAT’S IN THE BOX ……………...…...16-17
MENU SETTINGS………………………..18-22
- 10 -

①Menu ②Up Button
③OK ④Down Button
⑤Mode switch button
⑥USB port
⑦GPS socket ⑧Reserved port
⑨Reset ⑩Power
⑪TF card slot
- 11 -

CPU
NT 96658
Image Sensor
IMX323
LCD monitor
2.0 inch. TFT LCD
Lens
155 degree
Languages
English/ Multilanguage
G-Sensor
3-axis Accelerometer
Video
H.264 (MOV)
FHD 1920x1080 30fps
1280х720HD
Image
JPEG 12Mpx
Audio
Built-in microphone and
speaker
Memory Card
Class 10 Micro SD Card up
to 64 (max) in FAT32
Recommended- SAMSUNG
EVO
USB Port
Mini USB
Battery Capacity
Supercapacitor 5V/7F
Operating
Temperature
-20°C to 70°C -4°F to 158°F
Wireless Connections
WiFi (between phone and
WINNLOGY FX-8 Dash
Cam)
PC Operation System
Windows
XP/Vista/7/8/10/Mac
- 12 -

INSTALLATION
①Ideal Mounting Position ②GPS ③Car Charger
①Insert the micro SD card into the micro SD card slot.
Stick the car mount onto your car windshield (ideally right
in the middle)
Make sure that you place the recorder in a safe,
appropriate location where it will not obstruct the driver’s
view. Clean windshield before apply mount.
- 13 -

②Install the GPS module next to the camera
③Run the cable along the edge of the windshield, tuck it
away in the seams, and extend it all the way to the of the
Car Charger. Be sure to keep it away from the airbag area.
Insert the Car Charger into your cigarette lighter.
Note:
- Connecting the charger to the car's 12V DC outlet.
Be sure to connect only the WINNLOGY-approved
charger designed and supplied specifically for use with
your device. Using an incompatible charger can cause
serious personal injury or damage to your device.
- Format the memory card.
To ensure the memory card works on the dash cam, we
recommend using the dash cam to format the memory card
in the format FAT 32
- 14 -

Buttons
Button
Functions
POWER –Press and hold to turn the
device on or off
Press to confirm a selection while in
Setting Mode.
-Hot button: Emergency Lock (Press to
manually lock the file during recording)
Video setup menu.
Inclusion WI-FI
Photo mode (To enter photo mode, you
need to press within 5 seconds). Another
press 5 seconds, you will go into
playback mode. Another press 5 seconds,
you will go back to record mode.

Start recording
Stop recording
disable / enable sound during recording
- 15 -

WHAT’S IN THE BOX?
A.
C.
B. D.
E. F.
H.
G.
- 16 -