Winston Nsho-001 User manual

8 LAN 10Gig Fiber SFP+ 4G NGFW Firewall 1U Rackmount Server NSHO-001

NSHO-001

User Manual

8 LAN 10Gig Fiber SFP+ 4G NGFW Firewall 1U Rackmount Server NSHO-001

8 LAN 10Gig Fiber SFP+ 4G NGFW

Firewall 1U Rackmount Server

WWW.PONDESK.COM

8 LAN 10Gig Fiber SFP+ 4G NGFW Firewall 1U Rackmount Server NSHO-001

The subject matter of this document causes the disclosure of Winston Marriot Ltd

confidential and/or proprietary information. It shall not be disclosed to any person other

than responsible officers and employees of yours who are aware that the same is

commercially confidential and who are bound to treat it as such. It shall not be duplicated,

disclosed or used, in whole or in part for any purpose other than to evaluate the subject

matter of the document. Provided that, if a contract is awarded as a result of, or in

connection with the submission of this information you shall have rights to duplicate,

disclose or use the information as the contract may provide. This restriction does not limit

your right to use this document if it is obtained from another source without restriction.

This document and any copies containing any of this information must be returned to

Winston Marriot Ltd on request.

Winston Marriot Ltd reserves the right to change the contents of the product described in

this manual at any time and without prior notice.

No part of this manual may be reproduced, stored, copied or transmitted in any form or

any storage medium by any means, electronic, photocopying, recording or otherwise,

without the prior written permission of Winston Marriot Ltd.

Trademarks

Registered Names and Trademarks are the copyright and property of their respective

owners.

Products, corporate names and their logos presenting in the manual may or may not be

explanation and identification without intent to infringe.

Disclaimer

All information, specifications and illustrations contained in this manual are based on the

latest information (at the time of publication) and for informational use only with subject to

change at any time without notice. Winston Marriot Ltd takes no liability and responsibility

for any in error that may appear in this manual.

Winston Marriot Ltd will not be responsible and liable for the errors that may contained in

this manual and for incidental or consequential damages (including lost profits) in

connection with the furnishing, performance or use of this material.

United Kingdom

WWW.PONDESK.COM

8 LAN 10Gig Fiber SFP+ 4G NGFW Firewall 1U Rackmount Server NSHO-001

CONTENTS

1. INTRODUCTION

1.1 –Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 08

1.2 –Front & Back Side View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 09

1.3 –Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 09

2. SRTUCTURE

2.1 –Interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

2.2 –Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

2.3 –Opening the Case . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

3. MOTHERBOARD

3.1 –Interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

3.2 –Processor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

3.2.1 –Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

3.2.2 –Heatsink . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

3.2.3 –Heatsink Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

3.3 –Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

3.3.1 –Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

3.4 –Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

3.4.1 –mSATA SSD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

3.4.2 –2.5” SATA SSD/HDD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

3.5 –Wi-Fi & 3G/4G . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

3.6 –Interfaces & Jumper Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

3.6.1 –CMOS (JBAT1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

3.6.2 –JPW1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

3.6.3 –JP3, JP9 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

3.6.4 –SATA (SATA3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

3.6.5 –Serial Ports (COM1, COM2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

3.6.6 –Display Interface (JVGA1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

3.6.7 –Power Interface (ATXPWR1, ATX_12V1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

3.6.8 –Keyboard & Mouse Interface (KBMS1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

3.6.9 –USB Interface (USB1, USB2_USB4, USB3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

3.6.10 –Network & FAN Interface

(LAN1-8, JLAN_LED1, CPUFAN1, CPUFAN2, SYSFAN1) . . . . . . . . . . . . . . . . . 28

3.6.11 –Front Panel Connectors (FPANEL1, FPW1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

3.6.12 –General Purpose I/O (GPIO1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

WWW.PONDESK.COM

8 LAN 10Gig Fiber SFP+ 4G NGFW Firewall 1U Rackmount Server NSHO-001

3.6.13 –Mini-PCIe Interface (MINI-PCIE1, MSATA1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

4. POWER SUPPLY

4.1 –Technical Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

4.2 –Input Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

4.2.1 –Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

4.2.2 –Frequency Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

4.2.3 –Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

4.3 –Output Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

4.4 –Capacitive Load . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

5. FIBER PORT

5.1 –Details . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

6. BIOS

6.1 –Functions & Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

6.2 –Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

6.2.1 –Main Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

6.2.2 –Advanced Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

6.2.2.1 –ACPI Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

6.2.2.2 –IT8728 Super IO Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

6.2.2.3 –PC Health Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

6.2.2.4 –System Power Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

6.2.2.5 –CPU Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

6.2.2.6 –SATA Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

6.2.2.7 –USB Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

6.2.3 –Chipset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

6.2.4 –Boot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

6.2.5 –Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

6.2.6 –Save & Exit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

7. Warranty & RMA

7.1 –Terms and Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

7.2 –Product Registration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

APPENDIX A (Glossary) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

APPENDIX B (Troubleshooting) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

APPENDIX C (Abbreviations) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

WWW.PONDESK.COM

8 LAN 10Gig Fiber SFP+ 4G NGFW Firewall 1U Rackmount Server NSHO-001

Chapter 1

Introduction

8 LAN 10Gig Fiber SFP+ 4G NGFW Firewall 1U Rackmount Server NSHO-001

PONDESK network firewall router 1U rackmount server equipped with LGA 1150 series 4th

gen. Intel® Core™ i3-4160 processor (i5 & i7 CPU are optional) and Intel® H87 High-Speed

chipset. Highly reliable 1U network appliance with 8x Intel® 82574L gigabit Ethernet and

four 10 Gig SFP+ fiber ports (optional) for high bandwidth and long-distance

communications. You can add multiple LAN's or multiple WLAN's to your network, each

segmented for maximum security and configurability.

Integrated 2 Group BYPASS allows the two networks (1 to 2 and 3 to 4 LAN) to provide

alternative route in power failure or crash. When bypass enable then traffic passes if it

disables then nothing passed. (Refer to datasheet for details)

A complete network hub as a VPN, equipped with RJ45-DB9 COM (Cisco Standard) and to

take on a number of networking and communication tasks and can be used as a security

gateway to act as a virtual private network and firewall. Support Intel® AES-NI for secure

and fast data encryption and decryption and network wake-up/PXE function, watchdog

hardware reset function (L256, 0~255 seconds).

The server comes with two DDR3 SODIMM memory sockets, support up to 32GB non-ECC

memory. Support four storage drives including one mSATA SSD and three 2.5" SATA

SSD/HDD storage. Supports wireless networks 802.11 b/g/n Wi-Fi and 3G/4G LTE WWAN

via mini PCIe express slot (support one network WiFi/4G at a time). I/O options include two

USB 2.0 ports, a serial console port and VGA display port features Intel® HD Graphics.

Suitable for VPN, DNS Server, DHCP Server, network bandwidth controller, firewall and UTM

applications to deliver a high throughput, reliable operation, high performance and wide

array of network applications, Mikrotik, firewall and gateways like, pfSense, Sophos,

Untangle, Linux, Unix and Windows etc.

For details: https://www.pondesk.com/product/NSHO-001

WWW.PONDESK.COM

8 LAN 10Gig Fiber SFP+ 4G NGFW Firewall 1U Rackmount Server NSHO-001

1.1 SPECIFICATIONS

Processor

Support 4th gen. LGA1150 Intel® Core™

i7/i5/i3/Pentium/Celeron Processor

Memory

Support up to 16 GB

Types: SODIMM DDR3L memory

Slots: 2 x SODIMM

Storage

Support 1 x mSATA SSD

Support 1 x 2.5" SATA SSD/HDD

Support 2 x 2.5"/3.5" SATA HDD

Graphics

Intel® HD Graphics (based on the CPU)

Intel® Quick Sync Video

Expansion Slot

1 x Mini-PCIE Slot (For WIFI, 3G/4G)

1 x mSATA Slot (For SSD)

1 x SATA Slot (For 2.5” SSD/HDD)

1 x PCIE 8x (For fiber port)

LAN

8 LAN Intel® 82574L Gigabit LAN

Support network wake-up /PXE function

Integrated 2 Group BYPASS (Control 1 2

and 3 4 LAN)

I/O Specifications

8 x Intel® 82574L Gigabit LAN

1 x RJ45-DB9 COM (CISCO standard)

2 x USB 2.0, 1 x VGA

2 x LED Signal indicator

Onboard I/O

1 x JVGA1 (2*12pin)

1 x COM (2*5pin)

2 x LAN_LED (2*13pin)

4 x USB2.0 (2*5pin)

1 x PS/2 (1*6Pin)

1 x ATX_20P 1U

1 x CPUFAN (4pin)

2 x SYSFAN (4pin)

1 x FP1 (2*5pin) Front panel connector

Support 4 input and output GPIO

Support Windows 7, 8, 10 etc.

Support pfSense, Untangle, Debian,

Smoothwall, ClearOS, m0n0wall etc.

Power & Working Environment

Power Input: 90V-264V

Type: ATX 1U

Socket: C14

Output Voltage: 3.3V, 5V, 12V1, -12V, +5VSB

Operating Temperature: 0°C ~ 50°C

Storage Temperature: -20°C ~ 70°C

Relative Humidity: 5% - 95% (non-

condensing)

Others

BIOS: AMI 64MB Flash ROM

Cooling Type: Active Heat Sink

Watchdog: Support (L256, 0~255 seconds)

Size: 430mm x 360mm x 46mm (L*W*H)

Package: 1 x Network Server

1 x Power Cord

WWW.PONDESK.COM

8 LAN 10Gig Fiber SFP+ 4G NGFW Firewall 1U Rackmount Server NSHO-001

1.2 FRONT & BACK SIDE VIEW

1.3 PACKAGE

1 x Rackmount Server

1 x Power Cord

WWW.PONDESK.COM

8 LAN 10Gig Fiber SFP+ 4G NGFW Firewall 1U Rackmount Server NSHO-001

Chapter 2

Structure

8 LAN 10Gig Fiber SFP+ 4G NGFW Firewall 1U Rackmount Server NSHO-001

Durable 1U rackmount chassis with excellent ventilation with 3x cooling fans. Specially

designed for space-constrained applications. Stylish aluminum front panel design.

Support dual 2.5" SATA SSD/HDD or 3.5" SATA HDD storage drives.

2.1 INTERFACES

8 x Gigabit LAN 1 x RJ45 COM

2 x USB2.0 4 x SFP Fiber Interfaces

1 x VGA 1 x C14 Power Socket

2.2 DIMENSIONS

WWW.PONDESK.COM

8 LAN 10Gig Fiber SFP+ 4G NGFW Firewall 1U Rackmount Server NSHO-001

2.3 OPENING THE CASE

There are two screws at the back side of the chassis for holding the case cover. Remove

these screws and slightly press the case from the front side and slide the case cover

towards the backside to remove it.

WWW.PONDESK.COM

8 LAN 10Gig Fiber SFP+ 4G NGFW Firewall 1U Rackmount Server NSHO-001

WWW.PONDESK.COM

8 LAN 10Gig Fiber SFP+ 4G NGFW Firewall 1U Rackmount Server NSHO-001

Chapter 3

Motherboard

8 LAN 10Gig Fiber SFP+ 4G NGFW Firewall 1U Rackmount Server NSHO-001

PONDESK PONDESK server equipped with customized motherboard with PCIe 8X interface

for Fiber SFP/SFP+ ports and support LGA1150 Haswell series i3/i5/i7 processor.

The following figure shows the top interface position and dimensions of the motherboard.

In the process of installation of the device must be careful for some part, if not properly

installed, it will not work properly.

Please wear anti-static gloves when handling the components, as the static electricity may

damage the parts/components.

WWW.PONDESK.COM

8 LAN 10Gig Fiber SFP+ 4G NGFW Firewall 1U Rackmount Server NSHO-001

3.1 INTERFACES

Motherboard and its components are sensitive and could be easily damaged by electrostatic

influence. So, before installing and removing any part please always keep follow precautions.

1. Remove the power adapter before doing any changes.

2. please don’t touch any components or plug and socket pins.

3. Wear anti-static gloves/wrist strap while touching any component.

4. Always keep the removed parts in anti-static bag.

WWW.PONDESK.COM

8 LAN 10Gig Fiber SFP+ 4G NGFW Firewall 1U Rackmount Server NSHO-001

3.2 PROCESSOR

The motherboard is equipped with a surface mount LGA 1150 socket. This socket is

exclusively designed for Intel® Haswell series 4th generation processors powered by the

Intel® H87 High-speed chipset.

Intel® Core™ i3-4160 (3M Cache, 3.60 GHz)

2 Cores, 4 Threads

Intel® HD Graphics 4400

Intel® Core™ i5-4590 Processor (6M Cache, up to 3.70 GHz)

4 Cores, 4 Threads

Intel® HD Graphics 4600

Intel® Core™ i7-4790 Processor (8M Cache, up to 4.00 GHz)

4 Cores, 8 Threads

Intel® HD Graphics 4600

3.2.1 Installation

Step 1: Disconnect power and all peripheral devices that is connected to the system.

Step 2: Push the LGA 1150 CPU socket lever down and away from the socket to release it

from the metal retention tab.

Step 3: Remove the protective plastic cap from the socket. It’s used to protect the CPU

socket from dust and harmful particles.

Step 4: Insert the CPU into the socket. Make sure the gold triangular mark on the CPU must

align with the corner of the CPU socket.

Step 5: Close the load plate and push down the load lever.

Step 6: Hook the load lever under the retention tab.

Your processor is now correctly in place and ready for heatsink installation.

WWW.PONDESK.COM

8 LAN 10Gig Fiber SFP+ 4G NGFW Firewall 1U Rackmount Server NSHO-001

Installation and Integration Information for Intel® Processors with LGA1150

Socket

https://www.intel.com/content/www/us/en/support/articles/000005619/processors.html

- Processor and fan heat sink integration video

- Resetting boxed processor fan heat sink fasteners/pushpins

- How to apply Thermal Interface Material (TIM)

- System Thermal Management

3.2.2 Heatsink

Heat sink is a passive heat exchanger that transfers the heat generated by the CPU to the

fluid medium like thermal heat sink compound. It's necessary to remove the waste heat

produced by the CPU. Without a proper computer cooling system, the system's

components may not be able to function optimally and the integral parts could damage.

Overheating can reduce the lifespan of computer components and can lead to data loss

and irreparable damage.

The server equipped with a powerful active 28mm LGA 1150 heatsink to dissipate the heat

generated by the processor.

3.2.3 Heatsink Installation

Thermal grease is a kind of thermally conductive compound used as an interface between

heat sinks and processor to eliminate air gaps or spaces from the interface to maximize

heat transfer.

WWW.PONDESK.COM

8 LAN 10Gig Fiber SFP+ 4G NGFW Firewall 1U Rackmount Server NSHO-001

Before the installation of the heat sink, you must need to apply the thermal grease to

eliminate any air gaps and spaces between the processors and the heatsink.

Apply the thermal compound to the processor in just a little bit that's the size of a little

green pea.

Don't paste thermal compound all over the processor. Applying too much thermal compound

to the processor will result in the leakage that can cause a mess on the motherboard and it

will not allow proper transfer from the processor to the heat sink.

The four holes in the motherboard around the CPU socket according to the legs of heat

sink. Down the heat sink vertically onto the processor and socket to lines up each of the

legs with a hole as long as the legs fits into the holes.

After that tighten the screws. Be sure to tighten the screws in a crossing pattern, going over

each screw several times to ensure that they are all tight and then connect the heat sink 4-

wire fan cable connector to the motherboard 4-pin CPU fan header.

WWW.PONDESK.COM

8 LAN 10Gig Fiber SFP+ 4G NGFW Firewall 1U Rackmount Server NSHO-001

3.3 MEMORY

There is two SO-DIMM DDR3L slot, support up to 32GB (2x16GB) DDR3L SODIMM 204Pins

1.35V low voltage memory.

NOTE: The system doesn’t support ECC & 1.5V DDR3 memory, always use non-ECC 1.35V DDR3L memory.

3.3.1 Installation

Step 1: Turn off the system before installing and removing the memory.

Step 2: Align the notch and insert the memory module into the socket at a slight 30-40°

angle relative to the memory slot.

Step 3: Push down the memory until it slips down and properly seated into the socket.

3.4 Storage

The server support four storage drives,

1 x mSATA SSD

1 x 2.5" SATA SSD

2 x 2.5” SATA SSD/HDD OR 3.5” SATA HDD

3.4.1 mSATA SSD

There is one mSATA socket onboard. Turn off the machine and remove the chassis cover.

Locate mSATA socket and align the notches of the SSD with mSATA socket and insert it.

After that screw it according to the below illustrations.

WWW.PONDESK.COM

Table of contents

Popular Server manuals by other brands

Vector

Vector GSM-DSA quick start guide

Lenovo

Lenovo ThinkServer RD630 Guide d'utilisation

Xblue Networks

Xblue Networks QB Setup guide

DIGIBIT

DIGIBIT aria 2 user manual

Gigabyte

Gigabyte G293-Z43-AAP1 user manual

HPE

HPE ProLiant DL580 Gen9 user guide

Crestron

Crestron CEN-RVS-R210 quick start guide

HP Integrity rx1620 Operation guide

Asoni

Asoni SVR711 user manual

Stratus

Stratus ftServer V 2302 Site planning guide

Supermicro

Supermicro SuperServer 2028R-TXR user manual

Bull

Bull NovaScale R450 F2 manual

GIGA-BYTE TECHNOLOGY

GIGA-BYTE TECHNOLOGY E252-P31 user manual

D-Link

D-Link DVX-1000 user manual

Intergraph

Intergraph InterServe 80 SL System setup

NEC

NEC Express5800 110Ej user guide

IBM

IBM xSeries 230 6RY Hardware Maintenance Manual

AirLive

AirLive NAS-235 user manual

Winston NSHO-001 User manual

Popular Server manuals by other brands