Wintal 42LED12FHD User manual

1
CONTENTS
1 PREFACE····································································································· 2
2 SAFETY PRECAUTIONS ················································································ 2
3 FRONT , BACK AND REAR CONNECTIONS OF LED TV····································· 3
4 CONFIGURATION OF THE LED TV································································· 4
4.1 CHANNEL SETTING················································································ 5
4.2 PICTURE SETTING ················································································· 4
4.3 SOUND SETTING ··················································································· 4
4.4 TIME SETTING ······················································································ 5
4.5 OPTION SETTING··················································································· 5
4.6 LOCK SETTING······················································································ 5
USB INSTRUCTIONS ···················································································· 10
5 REMOTE CONTROL INSTRUCTIONS ··························································· 12
6 REMOTE CONTROLS SETUP ······································································· 14
6.1 BATTERY USAGE CAUTION ·································································· 14
7 ACCESSORIES ··························································································· 14
8 TROUBLE SHOOTING AND ADVICE ····························································· 14
9 SPECIFICATIONS ······················································································· 15

2
1 PREFACE
Thank you for buying this LED TV! Please read this manual thoroughly before operating the monitor.
Make sure the monitor was not damaged in transit. Should the monitor is damaged, do not install it and
contact your dealer. Check that you have all the accessories according to the model.
2 SAFETYPRECAUTIONS
Put the monitor on a stable surface.
Do not use the monitor with others fixations than those provided or suggested by the
manufacturer.
Do not place any material on the monitor.
If you have a wall mount, check that it is steady.
Do not block or cover the ventilation openings on the monitor
Powersource
The monitor must be plugged with a tension source of 100-240V and 50/60 Hz.
Connection cables
Power cord and cables must be properly routed and protected to prevent people from stepping
on them and causing the monitor to fall.
Heating sources and humidity
Keep the monitor dry and away from humidity.
Keep the monitor away from heat sources.
Cleaning and maintenance
Unplug the monitor before cleaning it. Do not use solvents or liquids to clean the monitor.
Only clean the monitor with a soft and dry cloth.
In case of troubleshooting, does not use spare parts other than those suggested by the
manufacturer. Using inadequate spare parts can lead to electric shocks short-circuits fire or
other incidents.
Departure in holidays
Unplug the TV during lighting storms or when unused for long periods of time.

3
3 Front , Back And Rear Connections of LED TV
Front View
Back View
（The backview is only for your reference;details according to the model）
Rear Connection
AUDIO OUT(R/L): Composite audio output
YPBPR:Component input(AUDIO:R/L)
AV IN(VIDEO/R/L):Composite video input
HDMI1/2/3：HDMI1/2/3 input
PC:VGA PC video input
PC AUDIO:PC audio input
RF:RF antenna connector
USB:USB Host port
OPTICAL:OPTICAL digital audio output(SPDIF) for connection to home theatre audio amplifier
EARPHONE:Headphone audio output
1. TV /AV select
2. Menu key
3. Channel up/down
4. Volume up/down
5. STANDBY
6. Remote control sensor

4
4 CONFIGURATION OF THE LED TV
4.1 CHANNEL SETTING
Press <MENU> key, then press ►key,
a) Press ▼then enter CHANNEL Setting Menu. Press ▲or ▼key and enter Auto Tuning, DVB-T
Manual Tuning,ATV Manual Tuning,Programme Edit,Signal Information,LCN Sorting,Software
Update(USB).
b) Press◄or►key to access and adjust Auto Tuning, DVB-T Manual Tuning,ATV Manual
Tuning,Programme Edit,Signal Information,LCN Sorting,Software Update(USB).
4.2 PICTURE SETTING
Press <MENU> Key, then enter the Menu.
a) Press ▼and enter Picture Setting Menu. Press ▲or ▼key and enter Picture
Mode,Contrast,Brightness,Colour, Sharpness,Tint, Colour Temp,Aspect Ratio,Noise Reduction.
b) Press ◄or ►key to access and adjust Picture Mode,Contrast,Brightness,Colour, Sharpness,Tint,
Colour Temp,Aspect Ratio,Noise Reduction.
4.3 SOUND SETTING
Press < MENU >, then press ►key
a) Press ▼, then enter Sound Setting Menu. Press ▲or ▼key to enter Sound
Mode,Treble,Bass,Balance,Auto Volume,Surround Sound,SPDIF Mode,Audio Delay.
b) Press ◄or ►Key to access and adjust Sound Mode,Treble,Bass,Balance,Auto Volume,Surround
Sound,SPDIF Mode,Audio Delay.

5
4.4 TIME SETTING
Press <MENU> key, then press►key
a) Press ▼, then enter TIME Setting Menu. Press ▲or ▼key and enter Clock,Off Time,On Time,
Sleep Timer, Auto Sleep,Time Zone,Daylight Saving.
b) Press ◄or ►key to access and adjust Clock,Off Time,On Time, Sleep Timer, Auto Sleep,Time
Zone,Daylight Saving.
4.5 OPTION SETTING
Press <MENU> key, then press►key.
a)Press ▼then enter OPTION Setting Menu. Press ▲or ▼key and enter OSD Language,Audio
Languages,Subtitle Language,Hearing Impaired,PVR File System,Reset,Blue Screen,OSD Timer.
b) Press◄or►key to access and adjust OSD Language,Audio Languages,Subtitle Language,Hearing
Impaired,PVR File System,Reset,Blue Screen,OSD Timer.
4.6 LOCK SETTING
Press <MENU> key, then press►key
a) Press ▼, then enter LOCK Setting Menu. Press ▲or ▼key and enter Lock System,Hotel Mode.
b) Press ◄or ►key to access and adjust Lock System,Hotel Mode.
Note：The initial password is 0000, universal password is 4711

6
c) Press ▼key to access the Hotel Mode,Press the password 0000,then enter into the HOTEL.
HOTEL MODE INSTRUCTIONS:
HOTEL MODE
1.Default OFF the following set all invalid;
2.Default ON Hotel Mode work
SET PASSWORD
Set the Password.
PICTURE MODE
Set the default boot Picture mode
SOUND MODE
Set the default boot Sound mode
KEY LOCK
1. Default status is OFF
2. Default ON,the Keypad is locked
SEARCH LOCK
1. Default status is OFF
2. Default ON, Can't searching channels
SOURCE SETTING
1. Default status is OFF
2. The user cannot select the source when it sets ON.
DEFAULT SOURCE SET OFF/DTV/ATV/PC…etc.
1. Default status is OFF
2. If this is set OFF, then it will automatically be in the last-step status when the TV is turned on.
3. If this is set to any other status like DTV/ATV or PC expect OFF, then it will automatically be in the
Source selection when the TV is turned on.
DEFAULT PROG
Turning the Default Source into DTV/ATV at first place, then you can find the acquiescent starting channel
being set as 1,2,3……etc.
MAX VOLUME SET 0/…/100 set a maximum volume value.
The user can adjust the volume within the limited preset value after being set the maximum
DEFAULT VOLUME
Set the default boot volume
CLEAR LOCK
Clear all the settings above.

7
PVR Function list
Item
Record directly
1.Press●button to record the current program.
Press to stop recording.
2.File maximum size 3.9G byte , if surpass the capacity
it will divide the file to deposit.
Timer record
1.Use EPG to carry on the appointment record.
2.Support periodicity record /everyday record
/disposable record.
3.When the time appointment is conflict ,it will
produce a warning message.
Disk manager
1.Can delete a single file .
2.Provide Disk formatting functions.
Playback 1.You can play back the recorded program in Media/USB
Channel
Basic instructions
1.The storage location of out file
Press ▼/ ▲button to select Option in the main menu.
Press ▼/ ▲button to select PVR File System, then press OK button to enter.
Press ▼/ ▲button to select Select Disk , then press OK button to enter .
Use the external device(USB/CARD) to do appointment record.
You can switch partition in this interface.
2 . Check the USB speed
Press ▼/ ▲button to select Check PVR File System ,
then press OK button to enter .Then it will check the USB speed.

8
Recording methods
Mode1: Shortcut key
1.Press ●button to record the current program.
Press to stop recording.
2.Press STOP button to stop recording ,the it will return to normal broadcast television.
3.When the storage space of Disk is shortage. It will produce a warning message, then
it stops recording automatically and return to normal broadcast television.
4.Press index button to see the information of the recorded list .
Press INFO button to see the detail of the program.
NOTE: You can see detail about the DATE/TIME/DURATION/PROGRAM NAME/CHANNEL
NAME/DESCRIPTION
Mode2:Time shift
1.Press►button to start Timeshift.
This operation can make the frame still ,and record program at the backstage.

9
Mode3:Timer
1.You can also press EPG button to set record.
Press the red button to start recording.
1. red background：means this time is the record time.
2. green background ：means reminder time list.
3. yellow background ：means the EPG's detailed information
2. blue background ：means this time is reminder time