WinWing J2-2-BASE User manual

J2-2-BASE
User Manual V1.2 2022.06

Contents：
Contents in the box ................................................................ 3
1Key features ...................................................................... 3
1.1 Performance ...................................................................3
1.2 Applicable Model ..............................................................2
1.3 External Dimension ............................................................2
1.4 Installation dimension ........................................................3
2Functions ......................................................................... 4
2.1 Mechanical and additional functions ...........................................4
3Parts installation ................................................................ 5
3.1 Suction cups installation .....................................................5
3.2 Cams installation .............................................................5
3.3 Resistance model ..............................................................5
3.4 Movable multiple force sensor mode ............................................6
4Assembly methods .................................................................. 6
4.1 Devices connection ............................................................6
4.2 Mounting installation .........................................................7

Contents in the box
1J2-2-BASE (1#) 1
2Accessories Bag (2#) 1
3USB cable (3#) 1
1Key features
1.1 Performance
1. The deflection angle of pitch and roll: ±17° ;
2. Expandable with the force feedback module*
3. Resistance model* ;
4. Movable force sensor mode*.

2
1.2 Applicable Model
.
1J2-2-BAES+A320
2J2-2-BAES+JGRIP-F18
3J2-2-BAES+JGRIP-F16
4J2-2-BAES+ EXTENSION1+A320
5J2-2-BAES+ EXTENSION1+JGRIP-F18
6J2-2-BAES+EXTENSION1+JGRIP-F16
For installation please
reference :4.1.
1.3 External Dimension
(Length/Width/Height)213mm*213mm*12
0mm ;
Weight:1.5kg=25.35lb。

3
1.4 Installation dimension
Available installation holes:
4-∅6 间距为 160*160。
The space of 4-M4: 60.1mm*60.1mm ;
The space of -∅6: 160* 160.

4
2Functions
2.1 Mechanical and additional functions
1. To expand force feedback module* you need to purchase EX1-J2-2(For Installation please
refer to: 3.2.) ;
2. For resistance model* you need to purchase EX 1-J2- 2(For Installation please refer to:
3.3.) ;
3. For sensor model* you need to purchase EX2-J2 -2(For Installation please refer to: 3.4.).

5
3Parts installation
3.1 Suction cups installation
1Remove four nuts on the suction cups. Insert four screws through the plate, then
tighten the nuts.
Note: Please clean the suction cups and your desk before installation.
3.2 Cams installation
Please refer to EX1-J2-2 User Manual .
3.3 Resistance model
Please refer to EX1-J2-2 User Manual.

6
3.4 Movable multiple force sensor mode
Please refer to EX2-J2-2 User Manual .
4Assembly methods
4.1 Devices connection
1Align and insert the PS2 connector into the base.
2Twist the knurled cover in the figure counterclockwise, and screw holes should be
roughly aligned with the seam of the grip when tightening (Only twist the knurled cover during
disassembly, otherwise the cable will be damaged)
3Use a wrench to tighten jack screw clockwise.
Note: Please reverse the steps above when dissembling.

7
4.2 Mounting installation
1Remove the 4 screws on the bottom, then remove the plate;
2Put the BASE on the mount, then install screws and spacers (prepared by yourself)from
the bottom to fix it on the mounting. .
Note: The mount, screws and spacers should be prepared yourselves.( Additional attention
to the length of screws:5 mm M4 screws)

* This is the final version of the manual, all update will be made online.
成都翼胜科技有限责任公司
WWW.WINWING.CN
[e-mail]
High-tech International Enterprise Zone No.19 Building,Changshengqiao Road
1111#, Pidu District, Chengdu,China 610000