Wireless comfort WCT-32 User manual

User Manual
Model WCT-32
Wireless
COMF RTTM
Made in the USA
Inside
Mo
Schedule Day
AM
AUTO
Set To
Heat
MENU HOLD NEXT ENTER
Up and Down keys used when
adjusting temperature, time of day,
day of the week, program start times
and other options
SYSTEM key selects Heat, Cool,
Auto Heat/Cool, Off and
Emergency Heating for a
heat pump application
Fan key selects Auto or
Cont fan operation
Temperature Setting
Space temperature
Indicates Morn, Day, Eve
or Night schedule
Indicates the Schedule, Hold or
Permanent Hold mode
Menu key used to set time of
day, daily schedule, calibrate
temperature sensor and
display schedule.
Hold key used to switch
between Schedule and
Permanent H operation
Next key used when setting
time of day and schedules
Battery compartment, 2 AA batteries.
Enter key used when setting
time of day and schedules
SYSTEM
FAN
SYSTEM
FAN
Improved Comfort
Energy Savings
Your wireless thermostat provides automatic control of the
temperature. You can set separate temperatures for heating
and cooling for four time periods per day (morning, daytime,
evening and night). Or you can operate the thermostat without
using the schedule feature (Permanent Hold mode).
The schedule feature can save you energy by reducing the
heating and cooling at night and during the daytime when you
are away.
This wireless communicating thermostat has a response delay when any of the keys are
pressed. This allows changes and commands to be properly transmitted to the HVAC Control
Module.

Factory Schedule
Warning!
The thermostat is shipped with the following factory schedule.
The thermostat is battery powered and the batteries should be
changed every year or when the low battery warning is displayed.
Morning
Day
Evening
Night
6:00AM
8:00AM
5:00PM
10:00PM
70F
62F
70F
62F
Heating
78F
82F
78F
82F
Cooling
Selecting System
Heat or Cool
Selecting Fan
Auto or Cont
Press the key to select , (heating and cooling)
(heating only), (cooling only) or (emergency
heating) if your system is a heat pump).
In the thermostat will call for heating or cooling depending on
the heating and cooling temperatures and the indoor temperature.
System Off Auto
Heat Cool EM HT
Auto
Press the key to select or (Continuous) fan
operation. In the thermostat activates the fan during
heating and cooling calls. In the fan runs continuously to
circulate air.
Fan Auto Cont
Auto
Cont
Inside
Inside
Th
Th
AM
AM
HEAT
HEAT
Set To
Set To
MENU
MENU
HOLD
HOLD
NEXT
NEXT
ENTER
ENTER
System
Mode
Fan
Mode
AUTO
AUTO
Heat
Selecting Schedule or
Permanent Hold
Press the key to switch between ,
and . operation automatically changes the
heating and cooling temperature settings at the four scheduled
times– Morning, Day, Evening and Night.
When in operation, adjusting the heating or cooling
temperature using the and keys switches to the
mode. After 3 hours the thermostat returns to the
mode. Press the key at any time to return to
mode.
The mode maintains the heating and cooling
temperatures indefinitely until the key is pressed which
will return the thermostat to the operation.
Hold Hold Hold Permanent
Schedule Schedule
Schedule
Up Down Hold
Schedule
Hold Schedule
Hold Permanent
Hold
Schedule
Inside
Schedule Day
Th
AM
AUTO
HEAT
Set To
MENU HOLD NEXT ENTER
Schedule
Mode in
Day
Schedule
HOLD Key
Heat
Program Start Time Setpoint
Setting the Heating and
Cooling Temperature
Press the hold the Up or Down key to change the heating or
cooling temperature. Press the Next key to switch between the
heating and cooling temperature.
2

Inside
Schedule Day
Th
AM
AUTO
HEAT
Set To
MENU HOLD NEXT ENTER
Cool
Schedule
Mode in
Day
Schedule
NEXT Key
Setting the Time
and Weekday
To set the time of day and the day of the week, press the
key and the LCD will display the hour. Use the and
keys to set the hour. Make sure that the AM or PM is correct.
MENU
Up Down
Press the key to set the minute. Use the and
keys to set the minute.
Press the key to set the current day of the week. Use the
and keys to select the day of the week and press the
key.
NEXT Up Down
NEXT
Up Down
ENTER
Th
AM
Changing the Schedule
Press and hold the key until the LCD displays the
schedule screen show below. Press and hold the or
key to change the morning ( ) schedule start time.
MENU
Up Down
Morn
Schedule Morn
AM
MENU CANCEL NEXT
3
CANCEL NEXT ENTER
Press the key to display the morning heating ( )
temperature. Use the or keys to change the
temperature
NEXT Heat
Up Down
Press the key to display the morning Cooling ( )
temperature. Use the or keys to change the
temperature.
NEXT Cool
Up Down
Schedule
Schedule
Morn
Morn
AM
AM
Heat
Cool
Set To
Set To
CANCEL
CANCEL
NEXT
NEXT
Continue using the key and the and keys to set
the start time, heating temperature and cooling temperature for
the , and schedules.
After the schedule is completed, you can press the
key which will only save the schedule for the day you
have programmed.
To apply the same schedule to other days of the week, press the
key.
NEXT Up Down
Day Evening Night
Night
ENTER
NEXT
PM
Mo
Schedule Night
Tu We Th Fr Sa Su
CANCEL NEXT ENTER
Monday through Sunday will appear on the LCD along with
a large in the upper right corner of the LCD. This
number represents Monday. Press the key again
and will appear which represents
01
NEXT
02

5418 Elmwood Avenue, Indianapolis, IN 46203-6025
06-1056-012910
Tuesday, and so on. Use the key to advance to each day
of the week. Use the and keys to turn days or
. The schedule will be applied to the days that are .
These days will be displayed on the thermostat.
Pressing the key saves the schedule in non-volatile ram
memory.
The example below shows a schedule being applied to Monday
through Friday. This might represent a typical residential
schedule where the occupants work during the week and are
home on the weekends.
NEXT
Up Down ON
OFF ON
ENTER
PM
Mo
Schedule
Tu We Th Fr
CANCEL NEXT ENTER
To set a different schedule for Saturday and Sunday, the
sequence is repeated. Monday through
Friday would be left and Saturday and Sunday left
Pressing the key will save the Saturday and Sunday
schedule and the thermostat will resume normal operation.
Changing the Schedule
OFF ON.
ENTER
4
PM
Schedule Night
Sa Su
CANCEL NEXT ENTER
Low Battery
Indication
If the battery voltage drops to where it could interfere with reliable
operation, the LCD will alternately display in place of the
Inside temperature. .
Lo
Replace batteries immediately
Inside
Day
Th
AM
Heat
AUTO
Set To
MENU HOLD NEXT ENTER
Schedule
Displaying the Time and
Temperature Schedule
Press and hold the key until the first schedule is displayed
as shown below. The display will show the Monday morning
scheduled start time and heating temperature. setting.
MENU
Continuing pressing the key to display the morning, day,
evening and night schedule along with the heating and cooling
temperatures for each day of the week. Press the key
at any time to exit and return the thermostat to normal operation.
NEXT
CANCEL
Mo
Schedule Morn
AM
Heat
Set To
CANCEL NEXT
All rights reserved.
Jackson Systems, LLC 2010
Intellectual rights apply.
©