Wirepath WPS-700-DOM-A-WH User manual

WPS-700-DOM-A-BL
WPS-700-DOM-A-WH
CAMERA
DOME
INSTALLATION MANUAL
Review manual thoroughly before installation.
Retain for future reference.

3
WPS-700-DOM-A Installation Manual
© 2012 Wirepath Surveillance
CONTENTS
Safety Instructions...............................................................................4
Features............................................................................................... 5
Package Contents............................................................................. 6
Installation Instructions....................................................................... 6
Set-Up...................................................................................................8
1. Operating The OSD Menu..................................................... 8
2. OSD Menu Structure...............................................................8
3. OSD Menu Settings................................................................. 12
3.1 Camera Name Setting.......................................12
3.2 Lens.......................................................................12
3.3 Exposure...............................................................13
3.4 Day/Night.............................................................14
3.5 WDR/BLC/ECLPS..................................................15
3.6 White Balance.....................................................16
3.7 3D-DNR.................................................................17
3.8 Effects...................................................................18
3.9 Special................................................................. 19
3.10 Exit.......................................................................22
RS485 System Diagram.......................................................................23
Warranty.............................................................................................. 23
Troubleshooting................................................................................. 24
Specications......................................................................................26
Dimensions...........................................................................................27
3

4
WPS-700-DOM-A Installation Manual
SAFETY INSTRUCTIONS
This information is provided to ensure your safety and to prevent
physicalornancialloss.Pleasereadthisdocumentcarefullybefore
installing and operating the camera.
1. Handle with care.
Use caution when handling to avoid damage to sensitive internal
components.
2. Do not install camera under extreme temperatures.
This camera only operates under temperature conditions between
14˚F~140˚F.
3. Do not mount the camera directly facing bright light sources.
Exposing the camera to strong light over long periods of time will
damage the camera’s sensor.
4. Do not supply voltage other than 12~30V DC or 24V AC.
This camera regulates power within this range. Higher voltages will
damage the camera’s electronic components.
5. Do not install camera in environments with extreme humidity.
Installing camera in environments with extreme humidity may cause
moisture to condense on the surface of the lens or dome cover,
which can affect picture quality.

5
WPS-700-DOM-A Installation Manual
© 2012 Wirepath Surveillance
FEATURES
• 1/3” Sony Super-HAD II CCD
The Sony Super HAD II CCD is ideal for low lux illumination, resulting
in a clear and crisp image.
• Varifocal Auto-Iris Lens
This camera features a varifocal lens with a focal length of
2.8-10 mm. The auto-iris function intuitively manages the amount
of light passing through the lens for consistent image brightness.
• Super WDR (Wide Dynamic Range)
Super WDR improves the contrast between bright and dark areas
of a scene to present a balanced image even in high-contrast
environments.
• True Day/Night (ICR)
 AnIRcutlterisautomaticallydeployedinthedaytimetoproduce
the most accurate color, then removed at night for maximum
visibility with IR illumination.
• 3D-DNR and Global Movement
The powerful 3D-DNR function with Global Movement not only
helps to reduce digital noise, but also minimizes the blurring effect
when an object is in motion.
• Special Functions
Automatic White Balance settings, Eclipse, Sense-up, and other
features optimize the camera to provide the best image in
 specicorchanginglightingconditions.
• RS-485 Connection and OSD
This camera features an OSD (on-screen display) for initial setup
and settings adjustment. Remote control is possible using a
compatible DVR or PTZ controller connected to the camera’s
RS485 wire leads.
• 3-Axis Gimbal
A 3-axis gimbal provides a wide range of camera positioning
angles through mechanical adjustment.
• Weatherproof Housing
The IP66-rated weatherproof housing makes this camera ideal for
outdoor surveillance.

6
WPS-700-DOM-A Installation Manual
PACKAGE CONTENTS
(1) Camera
(1) AC/DC plug
(3) Screws
(3) Wall fasteners
(1) 3mm Allen Key
(1) Foam gasket
Manual
NOTE 1: A POWER SUPPLY IS NOT INCLUDED WITH THIS CAMERA.
The PS-12DC-1A is recommended.
NOTE 2 : A Silica Gel package is mounted inside the dome housing. This package
should remain inside the housing after installation.
INSTALLATION INSTRUCTIONS
1. Recommended cabling includes solid copper RG59 or RG6 for
video, 18AWG two-conductor for power, and a CAT5 for RS485
control of the OSD.
2.Open the camera by using
the provided 3mm Allen key
to remove the three screws
on the dome cover.
3.Prior to installation, it is recommended to pre-adjust the camera’s
3-axis bracket angle so the lens points in the desired direction. The
lensangleshouldnotexceed50˚offofthecenteraxis(seepage
27 for details). It is also recommended to connect the camera to a
display and pre-adjust the zoom and focus
(see step 6). If the RS485
function will be utilized,
congureandtestthe
settings prior to camera
placement. Taking
these steps will speed
installation time.

7
WPS-700-DOM-A Installation Manual
© 2012 Wirepath Surveillance
4. Use the provided foam gasket as
a template to pre-mark mounting
hole locations. Position the camera
base at the desired location and
use the provided screws to attach
the camera base to the wall
or ceiling.
5. Using the supplied AC/DC plug,
connect the power supply jack
to 12-30 VDC or 24 VAC
and the BNC Video Output to
the desired video line.
WARNING – DO NOT CONNECT
POWER TO THE RS485 LEADS.
6. Once the camera is
installed, check the
viewing angle, zoom
and focus settings. To
adjust the zoom and
focus, loosen (but do
not remove), the set
screws. Using the set screws rotate the lens until you achieve the
desired setting. Once you have correctly set the zoom and focus,
tighten the set screws. Ensure the rubber lens gasket is in place.
7. Replace the dome cover to the dome base,
and make sure the screws on the dome cover
are tightened securely. Doing so seals the
dome from the elements, and creates a tight
 taroundtherubberlensgaskettoprevent
 theIRLEDsfromreectingintothelens.
12-30 V DC
or 24 VAC Power
BNC Video Output
RS485 Leads
White (+), Green(─)
AC/DC Plug
FOCUS
(Near-Far)
Rubber
Lens Gasket
ZOOM
(Tele-Wide)
NOTE : DO NOT remove the Silica Gel package

8
WPS-700-DOM-A Installation Manual
SET-UP
Operating the OSD Menu
 •ToviewtheOSD,thecameramust
be connected to a display monitor.
 •Thebuttonfoundonthe
rear circuit board of the
  cameraprovidesve
separate actions: UP,
DOWN, EXIT, ENTER
and MENU.
 •Pressthebuttontoenter
into the OSD MENU page.
 •PressUP,DOWN,EXIT(Left)
or ENTER (Right) to select
items on the menu and
  beginconguration.
OSD Menu Structure
Settingshavebeenpreconguredforoptimalperformanceinmost
applications. If adjusting the settings produces a poor picture,
factory reset the camera to restore the original settings (see p.21)
Bold indicates factory preset
CAM NAME
LENS
OFF, ON
DC IRIS
MANUAL
BRIGHTNESS
REACTION
SPEED
PREVIOUS
BRIGHTNESS
REACTION
SPEED
PREVIOUS
0-100 (50)
1-8
0-100 (50)
1-8
EXPOSURE AGC
SHUTTER
SENSE-UP
INITIAL SET
PREVIOUS
OFF, LOW, MIDDLE, HIGH
Auto,X2~X512(Auto X8)
AUTO, OFF, A. FLK, 1/160, 1/250, 1/500, 1/700, 1/1000,
1/1600/ 1/2500, 1/5000, 1/7000, 1/10000, 1/30000,
1/50000, 1/90000, X2, X3, X4, X5, X6, X8, X10, X12, X14,
X16, X24, X32, X64, X128, X256, X512
OSD Menu
Button

9
WPS-700-DOM-A Installation Manual
© 2012 Wirepath Surveillance
OSD Menu Structure cont. (bold indicates factory preset)
DAY/NIGHT
WDR/BLC/
ECLPS
DAY
AUTO
EXT
NIGHT
WDR
BLC
ECLPS
OFF
D/N LEVEL
FILTER DLY
NIGHT BURST
INITIAL SET
PREVIOUS
WDR LEVEL
NIGHT ECLIPSE
PREVIOUS
HIGH, MIDDLE, LOW
1, 3, 5, 10, 15, 30 and 60SEC
ON, OFF
ON, OFF
1~100(32)
SUPER, HIGH,
MIDDLE, LOW
OFF
ON DARK
ON IR
IR MODE
IR DEST
PREVIOUS
AREA SETTING
ALL AREA SET
MASK COLOR
ECLPS LEVEL
GAIN CONTROL
PREVIOUS
ON, OFF
GRAY,
D GRAY,BLACK
1-5
ON, OFF
ON, OFF
GRAY,
D GRAY,BLACK
1-5
ON, OFF
AREA SETTING
ALL AREA SET
MASK COLOR
ECLPS LEVEL
GAIN CONTROL
PREVIOUS
AREA SETTING
ALL AREA SET
MASK COLOR
ECLPS LEVEL
GAIN CONTROL
PREVIOUS
HIGH, MIDDLE, LOW
ON, OFF
GRAY, BLACK, D. GRAY
1~5(1)
ON, OFF
BLC LEVEL
PREVIOUS

10
WPS-700-DOM-A Installation Manual
OSD Menu Structure cont. (bold indicates factory preset)
EFFECTS DZOOM
MODE
IMAGE FREEZE
D-EFFECT
CONTRAST
SHARPNESS
COLOR
ADJUST
INITIAL SET
PREVIOUS
ZOOM
PAN
TILT
PREVIOUS
OFF, MIRROR, V-FLIP, ROTATE
0~100(50)
0~100(50)
COLOR
COLOR LEVEL
COLOR HUE
RED GAIN
BLUE GAIN
PREVIOUS
ON, OFF
─100─200(100)
─100─100(0)
─100─100(0)
─100─100(0)
ON, OFF
ON, OFF X1~X6.13
-100~100
-100~100
WHITE BAL
3D-DNR
ATW
COL-ROLL
PUSH
MANUAL
ON, OFF DNR LEVEL
DESTINATION
GLOBAL
MOVEMENT
PREVIOUS
COLOR TEMP
BLUE
RED
INITIAL SET
PREVIOUS
1~100(24)
0-63 (47)
ON, OFF
INDOOR, OUTDOOR
-100~100(0)
-100~100(0)

11
WPS-700-DOM-A Installation Manual
© 2012 Wirepath Surveillance
SPECIAL ITS MODE
MOTION DET
PRIVACY
MASK
ZONE NUMBER
ZONE STATE
WIDTH
HEIGHT
MOVE X
MOVE Y
SENSITIVITY
INITIAL SET
PREVIOUS
MASK NUMBER
MASK STATE
MASK COLOR
WIDTH
HEIGHT
MOVE X
MOVE Y
INITIAL SET
PREVIOUS
ZONE 1-8
ON, OFF
0~100
0~100
0~100
0~100
0~100
MASK 1-8
ON, OFF
GRAY / BLACK / YELLOW / BLUE /
GREEN / RED/ WHITE
0~100(30)
0~100(30)
0~100(30)
0~100(25)
ON
OFF
ON
OFF
ON
OFF
DAY
NIGHT
SHUTTER
AGC
LICENSE PLATE
PREVIOUS
SHUTTER
AGC
LICENSE PLATE
PREVIOUS
CONTRAST
OUTPUT LEVEL
TONE
PREVIOUS
CONTRAST
OUTPUT LEVEL
TONE
PREVIOUS
0~100(50)
64~64(0)
1~64(0)
0~100(50)
64~64(0)
1~64(0)
1/1600, 1/2500, 1/5000, 1/7000, 1/10,000, 1/30,000, 1/50,000,
1/90,000, OFF, A.FLK, 1/160, 1/250, 1/500, 1/700, 1/1000
1/1600, 1/2500, 1/5000, 1/7000, 1/10,000, 1/30,000, 1/50,000,
1/90,000, OFF, A.FLK, 1/160, 1/250, 1/500, 1/700, 1/1000
OFF, LOW, MIDDLE, HIGH
OFF, LOW, MIDDLE, HIGH
EXIT
LANGUAGE
STABILIZER
L/L SYNC
MONITOR TYPE
FACTORY
RESET
COMM SET
PREVIOUS
English / Korean / Spanish / French / Russian
ON, OFF
INT
CRT, LCR
PROTOCOL
CAMERA ID
BAUD RATE
SAVE /
REBOOT
PREVIOUS
PELCO-D
0~255
DISPLAY ID
ID POSITION
PREVIOUS
4800 / 9600 / 19200 /
38400 / 57600

12
WPS-700-DOM-A Installation Manual
OSD MENU SETTINGS
The camera menu allows for
the adjustment of settings to
obtain optimal image clarity
and color realism.
Note : If there is a “ ” symbol
after the option, enter into the
subdirectory to adjust more settings.
CAMERA NAME SETTING
The CAM NAME provides the ability to
set a camera title to appear on-screen.
 •Todisplaythecameraname
on-screen, set the CAM NAME
to ON.
 •Selectacameranamebyselectingoneletter/numberatatime
using the menu at the bottom of the screen. Consider assigning
a camera name that highlights the location of the camera such
as Lobby, Main Hall, Entrance 1, etc.
 •SelectCLRtoclearallletters.SelectPOStochoosetheposition
of CAM NAME on the screen. Select END to exit the menu.
LENS
 •SelectDCIRIS(Auto-IRIS),
or MANUAL mode.
 •InDCmode,thecameraadjuststhe
aperture of the lens automatically
based on the lighting conditions of
the environment. DC mode is the
recommended setting, especially for outdoor locations and
environments with varying lighting conditions. Reaction speed
determines the speed of the Auto Iris feature.
 •InMANUAL mode, the aperture is set fully open. This setting is only
recommended for an environment with consistent lighting conditions.
<CAMERA NAME>
A B C D E F G H I J K L M
N O P Q R S T U V W X Y Z
a b c d e f g h I j k l m
n o p q r s t v u w x y z
-- • 0 1 2 3 4 5 6 7 8 9
← → CLR POS END
---------------------------------------
<MAIN MENU>
1. CAM NAME OFF
2. LENS DC IRIS
3. EXPOSURE
4. DAY/NIGHT DAY
5. WDR/BLC/ECLPS WDR
6. WHITE BAL ATW
7. 3D-DNR ON
8. EFFECTS
9. SPECIAL
0. EXIT RET
<LENS>
BRIGHTNESS 50--------|----------
REACTION SPEED 8---------------|
PREVIOUS

13
WPS-700-DOM-A Installation Manual
© 2012 Wirepath Surveillance
EXPOSURE
AGC (Auto Gain Control) Setup
 AGCmodeautomaticallyampliesthe
video signal during low light conditions.
•Adjust the AGC by selecting OFF, LOW,
MIDDLE, or HIGH. Please note that signal
noise is slightly higher when AGC is enabled.
SHUTTER Setup
Shutter setup allows for control of the electronic shutter speed. Select
a shutter speed to match the lighting condition of the environment
and the goal of the camera location.
 •ChoosefromAUTO,OFF,A.FLK,1/160,1/250,1/500,1/700,1/1000,
1/1600/ 1/2500, 1/5000, 1/7000, 1/10000, 1/30000, 1/50000, 1/90000,
X2, X3, X4, X5, X6, X8, X10, X12, X14, X16, X24, X32, X64, X128, X256, X512.
 •Forenvironmentswithunstablelightingconditions,theAUTOsetting
is recommended.
 •Fordarkerenvironmentswithxedlightingconditions,selecta 
slower shutter speed.
 •Forbrighterenvironmentswithxedlightingconditions,or
scenarios in which fast-moving objects must be captured,
select a faster shutter speed, such as 1/1000 seconds.
 •A.FLKcontrolstheickeringeffectonthescreenresultingfrom
different video refresh rates, e.g. PAL (50 Hz, 60 Hz) and NTSC
(50 Hz, 60 Hz). In such cases, set the shutter to A. FLK(1/100) to
accommodate the different refresh rates.
SENSE-UP Setting
The SENSE-UP feature enhances the sensitivity of the camera and
allows the camera to display bright images even under extremely
dark conditions. SENSE-UP slows the shutter speed while increasing
the brightness for superior low-lux performance.
• OFF: Deactivates the SENSE-UP function.
• AUTO: Activates the SENSE-UP function. Select the SENSE-UP level
from X2 to X512.
Note : The SENSE-UP function is only available when SHUTTER
is set to AUTO.
INITIAL SET
Returns the exposure settings to factory default.
<EXPOSURE>
AGC HIGH
SHUTTER AUTO
SENSE-UP AUTO X8
INITIAL SET
PREVIOUS

14
WPS-700-DOM-A Installation Manual
DAY/NIGHT
 •SettheDAY/NIGHTvaluetoAUTO,
DAY, NIGHT, or EXT based on the
installation application.
• DAY: The camera remains in color
mode all of the time.
• NIGHT: The camera remains in black and white (B/W) all of the time.
• EXT: This mode uses the external sensor in the camera to switch
to color or B/W. This is the recommended setting.
• AUTO: The camera uses the lens to determine color or B/W. When in
AUTO mode, the camera automatically switches to B/W when lighting
levels are low, and back to color when they increase.
Note: AGC must be enabled for AUTO mode to be an option in the
DAY/NIGHT menu.
AUTO Setting
When setting the DAY/NIGHT mode to
AUTO, the camera uses the lens to detect
the Lux rating of the picture and switches
to color or B/W automatically. Press the
MENU button to set the switching time
and speed for AUTO mode.
• D/N LEVEL: Select the sensitivity of switching between color and B/W.
Set the value to “LOW”, “MIDDLE” or “HIGH” mode based on the
environment of where the camera is installed. The “HIGH” level
switches the camera to color or B/W with less change in the lighting
level than the LOW mode.
• FILTER DLY: Select the delay time before the camera switches
   betweencolorandB/Wmodebychangingthelterdelay.Thedelay
time can be set to 1SEC, 3SEC, 5SEC, 10SEC, 15SEC, 30SEC and 60SEC.
• NIGHT BURST
- ON: The B/W image is actually a gray image and contains the
color signal.
- OFF: This is a true B/W image containing no color signal.
• INITIAL SET: Returns the Day/Night Auto settings to factory default
settings.
• PREVIOUS: Return to the previous page.
<MAIN MENU>
1. CAM NAME OFF
2. LENS DC IRIS
3. EXPOSURE
4. DAY/NIGHT DAY
5. WDR/BLC/ECLPS WDR
6. WHITE BAL ATW
7. 3D-DNR ON
8. EFFECTS
9.SPECIAL
0. EXIT RET
<D/NIGHT AUTO MENU>
D/N LEVEL MIDDLE
FILTER DLY 10SEC
NIGHT BURST OFF
INITIAL SET
PREVIOUS

15
WPS-700-DOM-A Installation Manual
© 2012 Wirepath Surveillance
EXT Setting
By selecting the EXT value in the Day/Night
Mode and pressing MENU, you can enter into
a subdirectory to adjust the IR WDR LEVEL
and IR WDR DEST.
• IR MODE: The IR level can be switched
to ON or OFF.
• IR DEST: IR Destination is used to spread the IR light to
 evenlyllthescenewiththesameIRintensity.
• PREVIOUS: Return to previous page.
WDR/BLC/ECLPS
Select one of three mode options:
Wide Dynamic Range, Back Light
Compensation or Eclipse.
WDR (Wide Dynamic Range) Setting
When there are both bright and
dark areas in the scene at the same
time, this setting balances the contrast
between the two areas. This makes
the picture distinctive and clear so
the object has optimum detail and color.
• WDR LEVEL: Choose SUPER, HIGH,
MIDDLE or LOW based on the environment.
• NIGHT ECLIPSE: Choose ON DARK for low lux
environments when IR is not used. Choose
ON IR for use at night when IR LEDs are on.
Refer to ECLIPSE setting on page 16 for more information
• PREVIOUS: Return to previous page.
BLC (Back Light Compensation) Setting
This function corrects the exposure of
subjects in front of a bright light source.
• BLC LEVEL: Set the BLC LEVEL by
selecting LOW, MIDDLE, or HIGH.
• PREVIOUS: Return to previous page.
<D/N EXT MENU>
IR MODE OFF
IR DEST 32 -------|--------
PREVIOUS
<WDR MENU>
WDR LEVEL HIGH
NIGHT ECLIPSE
PREVIOUS
<BLC MENU>
BLC LEVEL HIGH
PREVIOUS
<MAIN MENU>
1. CAM NAME OFF
2. LENS DC IRIS
3. EXPOSURE
4. DAY/NIGHT DAY
5. WDR/BLC/ECLPS WDR
6. WHITE BAL ATW
7. 3D-DNR ON
8. EFFECTS
9.SPECIAL
0. EXIT RET

16
WPS-700-DOM-A Installation Manual
ECLIPSE Setting
The ECLIPSE function is used to cut off
exceptionally bright light, such as headlights
of a vehicle. Zones and sensitivity can be
adjusted based on the scene.
• AREA SETTING: Up to 16 programmable
areas can be set. Press ENTER and
EXIT to select areas. Press UP or
DOWN to turn the areas ON or OFF.
Press MENU to return to previous page.
• ALL AREA SET: Select ON to select the entire screen to cut off
bright light. Select OFF to cancel all areas.
• MASK COLOR: Change the mask color to GRAY, Dark
GRAY or BLACK.
• ECLPS LEVEL: Adjust the ECLIPSE level from 1 to 5. The larger the
value, the more sensitive the camera to the light.
• GAIN CONTROL: Turns the gain ON or OFF
• PREVIOUS: Return to previous page.
WHITE BALANCE
White Balance is the process of balancing
the color of an image so that the picture is
as accurate as possible. White balance
adjusts the image color according to the
lighting conditions of the scene. Select
one of following white balance modes:
 •ATW (Auto Tracking White Balance):
ATW analyzes the color temperature of the scene and automatically
compensates to provide accurate white balance.
 •COL-ROLL: Thisfeatureisusedwhenthesceneincludesuorescent
lighting and the camera has a moiré of colors in the image near
the lights.
<MAIN MENU>
1. CAM NAME OFF
2. LENS DC IRIS
3. EXPOSURE
4. DAY/NIGHT DAY
5. WDR/BLC/ECLPS WDR
6. WHITE BAL ATW
7. 3D-DNR ON
8. EFFECTS
9.SPECIAL
0. EXIT RET
< ECLIPSE MENU>
AREA SETTING
ALL AREA SET OFF
MASK COLOR GRAY
ECLPS LEVEL 1 |---------------
GAIN CONTROL OFF
PREVIOUS

17
WPS-700-DOM-A Installation Manual
© 2012 Wirepath Surveillance
• PUSH: This function is ideal for an environment with the predominance
of a single color. For example, when used in a casino and the
camera is pointed to a green table, the color would be inaccurate
and the overall tone of the picture would be too red. This mode
compensates the white balance and offers a more accurate color.
To set the PUSH function, select PUSH and zoom the camera to a
sheet of white paper located in the scene. Press the “MENU” button.
The camera will automatically set the white balance value. Reorient
the camera to the desired scene, and remove the white paper.
• MANUAL: Adjusts the value of blue and red colors to a user-preferred
white balance image.
MANUAL Setting
• COLOR TEMP: Select INDOOR or
OUTDOOR based on the installation.
• RED and BLUE: Adjust the value of
the red and blue colors to a user-
preferred white balance image.
• INITIAL SET: Return the White Balance to
the factory default setting.
• PREVIOUS: Return to previous page.
3D-DNR
Digital noise reduction produces extremely
clear images even in low light conditions for
24/7 surveillance. Not only does it help to
reduce image noise, but it also minimizes
blurring of moving objects.
Note: The 3D-DNR function is only available
when Auto Gain Control (AGC) is enabled
in the EXPOSURE sub menu.
 •Setthe3D-DNRtoONtoactivatetheDNRfunction.
When 3D-DNR is ON, enter into the subdirectory to adjust:
<MAIN MENU>
1. CAM NAME OFF
2. LENS DC IRIS
3. EXPOSURE
4. DAY/NIGHT DAY
5. WDR/BLC/ECLPS WDR
6. WHITE BAL ATW
7. 3D-DNR ON
8. EFFECTS
9.SPECIAL
0. EXIT RET
<WB MANUAL MENU>
COLOR TEMP INDOOR
RED 0 -------|-------
BLUE 0 -------|-------
INITIAL SET
PREVIOUS

18
WPS-700-DOM-A Installation Manual
• DNR LEVEL: User-selectable from 1 to 100.
The higher the value, the more obvious
DNR performance.
• DESTINATION: User-selectable from 0 to 63.
The higher the value, the brighter the image.
• GLOBAL MOVEMENT: This function reduces the object-blurred
phenomenon when an object is in motion.
• PREVIOUS: Return to previous page.
EFFECTS
DZOOM Mode
The Digital Zoom feature allows the user
to set a zoom up to X10.22
• ZOOM: Select a digital zoom of
X1.0 to X10.22
• PAN: Adjust the zoom picture to
move horizontally.
• TILT: Adjust the zoom picture to
move vertically.
IMAGE FREEZE
 •SelectONforastillpicture,OFFforamovingpicture.
D-EFFECT
Typically used in vehicles, the image can be mirrored by enabling
the Mirror Image View. There are 3 modes available: MIRROR,
V-FLIP(Vertical Flip), and ROTATE (Rotate 180 degrees).
CONTRAST
When increasing the contrast value, dark colors become darker
and light colors become lighter. The value ranges from 0 to 100.
SHARPNESS
When increasing the sharpness value, the picture outline becomes
stronger and clearer. The value ranges from 0 to 100.
<3D-DNR MENU>
DNR LEVEL 24 -----|-----------
DESTINATION 47 -----------|-----
GLOBAL MOVEMENT OFF
PREVIOUS
<EFFECTS MENU>
DZOOM MODE OFF
IMAGE FREEZE OFF
D-EFFECT OFF
CONTRAST 50 -------|------
SHARPNESS 50 -------|------
COLOR ADJUST
INITIAL SET
PREVIOUS
<DIGITAL ZOOM MENU>
ZOOM X1.00 |-----------
DZOOM PAN 0 ------|------
DZOOM TILT 0 ------|------
PREVIOUS

19
WPS-700-DOM-A Installation Manual
© 2012 Wirepath Surveillance
COLOR ADJUST
Adjust the color of the image.
INITIAL SET
Return to factory default setting.
PREVIOUS
Return to previous page.
SPECIAL
ITS MODE
IntelligentTrafcSystemModeallowsforsetup
of the camera in DAY and NIGHT modes to better
see license plates in bright light conditions typically caused by car
head lamps. Settings adjust the speed of the shutter
and AGC based on environmental conditions.
MOTION DET Setting
The Motion Detection Menu allows up to 8
zones of motion detection. When an object
in one of the zones moves, the camera will
display MOTION AT: XX and highlight the box
around the zone of motion. This allows for
 monitoringmotionmoreefciently.Set
MOTION DET to ON to enter into the Motion
Det subdirectory for settings.
• ZONE NUMBER: Select1~8toadjustthe
settings of the area (zone) for motion
to be detected.
• ZONE STATE: Set to ON to display the detection zone on the screen,
set to OFF to hide the detection zone on the screen.
• WIDTH, HEIGHT: Customize the size of detection zone by adjusting
the width and height.
• MOVE X: Determines the coordinate of the vertical axis for
selected zone.
• MOVE Y: Determines the coordinate of the horizontal axis for
selected zone.
• SENSITIVITY: Increase motion detection sensitivity by increasing
this setting.
• PREVIOUS: Return to previous page.
<MOTION DET MENU>
ZONE NUMBER ZONE 1
ZONE STATE OFF
WIDTH 20 ---|----------
HEIGHT 30 ------|-------
MOVE X 15 ---|----------
MOVE Y 25 ----|--------
SENSITIVITY 50 -----|-------
INITIAL SET
PREVIOUS
<SPECIAL MENU>
ITS MODE OFF
MOTION DET OFF
PRIVACY MASK OFF
LANGUAGE ENGLISH
STABILIZER OFF
L/L SYNC INT
MONITOR TYPE CRT
FACTORY RESET
COMM SET
PREVIOUS

20
WPS-700-DOM-A Installation Manual
PRIVACY MASK Setting
 PrivacyMaskcongurationallowsformasking
of up to 8 “surveillance-free” zones in the picture.
For example, this may be used for a camera
that has a neighbor’s window in part of the
scene. Set PRIVACY MASK to ON to enter
into the subdirectory.
• MASK NUMBER: Select1~8toadjustthesettingsofthearea
to be masked.
• MASK STATE: Set to ON to show the privacy mask on the screen.
Set to OFF to hide the privacy mask.
• MASK COLOR: Options for the mask color include: Gray, White,
Red, Green, Blue, Yellow or Black.
• WIDTH, HEIGHT: Customize the size of privacy mask by adjusting
these values.
• MOVE X: Determines the coordinate of the vertical axis for
selected privacy mask.
• MOVE Y: Determines the coordinate of the horizontal axis for
selected privacy mask.
• PREVIOUS: Return to previous page.
LANGUAGE Setting
There are 5 different language options; English / Korean / Spanish /
French / Russian.
STABILIZER Setting
This function is effective for when the camera is installed in an unstable
environment (such as a camera mounted on an antenna tower) and
 efcientlyeliminatestheblurringorickeringofimages.
Note: The Image Stabalizer function uses the digital zoom and will
decrease the resolution of the camera. It is not recommend in low light
or monochromatic settings.
• ON: Enables the Image Stabilizer.
•OFF: Disables the Image Stabilizer.
<PRIVACY MASK MENU>
MASK NUMBER MASK 1
MASK STATE OFF
MASK COLOR
WIDTH 20 ---|----------
HEIGHT 30 ------|-------
MOVE X 15 ---|----------
MOVE Y 25 ----|--------
INITIAL SET
PREVIOUS