Wise SCD-6013 User manual
SCD-6013
High Resolution Dome Camera
User Manual
Available from A1 Security Cameras
High Resolution Dome Camera
User Manual
Copyright
©2017 Hanwha Techwin Co., Ltd. All rights reserved.
Trademark
Each of trademarks herein is registered. The name of this product and other trademarks mentioned in this
manual are the registered trademark of their respective company.
Restriction
Copyright of this document is reserved. Under no circumstances, this document shall be reproduced,
distributed or changed, partially or wholly, without formal authorization.
Disclaimer
Hanwha Techwin makes the best to verify the integrity and correctness of the contents in this document,
but no formal
guarantee shall be provided. Use of this document and the subsequent results shall be entirely on the user’s
own responsibility. Hanwha Techwin reserves the right to change the contents of this document without
prior notice.
Design and specifications are subject to change without prior notice.
Available from A1 Security Cameras
Before operating the camera, confirm the camera model and correct input power voltage. To
help you understand this manual thoroughly, we'll introduce our model description.
■ SCD-6013 SERIES
• NTSC MODEL • PAL MODEL -
SCD-6013N SCD-6013P -
■ MODEL DESCRIPTION
• SCD-6013X
_
SIGNAL SYSTEM
•SIGNAL SYSTEM -
N →NTSC MODEL -
P →PAL MODEL -
Available from A1 Security Cameras
safety information
CAUTION
RISK OF ELECTRIC SHOCK.
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
This symbol indicates that dangerous voltage consisting a risk of electric
shock is present within this unit.
This exclamation point symbol is intended to alert the user to the presence
of important operating and maintenance (servicing) instructions in the
literature accompanying the appliance.
WARNING
• To prevent damage which may result in fire or electric shock hazard, do not expose this
appliance to rain or moisture.
• To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with
the installation instructions.
WARNING
1. Be sure to use only the standard adapter that is specified in the specification sheet.
Using any other adapter could cause fire, electrical shock, or damage to the product.
2. Incorrectly connecting the power supply or replacing battery may cause explosion, fire,
electric shock, or damage to the product.
3. Do not connect multiple cameras to a single adapter. Exceeding the capacity may cause
abnormal heat generation or fire.
4. Securely plug the power cord into the power receptacle. insecure connection may cause
fire.
5. When installing the camera, fasten it securely and firmly. The fall of camera may cause
personal injury.
4_ safety information
Available from A1 Security Cameras
English_5
●safety information
6. Do not place conductive objects (e.g. screwdrivers, coins, metal parts, etc.) or containers
filled with water on top of the camera. doing so may cause personal injury due to fire, electric
shock, or falling objects.
7. Do not install the unit in humid, dusty, or sooty locations. doing so may cause fire or electric
shock.
8. If any unusual smells or smoke come from the unit, stop using the product. in such case,
immediately disconnect the power source and contact the service center. continued use in
such a condition may cause fire or electric shock.
9. If this product fails to operate normally, contact the nearest service center. never disassemble
or modify this product in any way. (Hanwha Techwin is not liable for problems caused by
unauthorized modifications or attempted repair.)
CAUTION
1. Do not drop objects on the product or apply strong shock to it. Keep away from a location
subject to excessive vibrationor magnetic interference.
2. Do not install in a location subject to high temperature (over 55°C), low temperature (below
-10°C), or high humidity. Doing so may cause fire or electric shock.
3. If you want to relocate the already installed product, be sure to turn off the power and then
move or reinstall it.
4. Remove the power plug from the outlet when then there is a lightning. Neglecting to do so
may cause fire or damage to the product.
5. Keep out of direct sunlight and heat radiation sources. It may cause fire.
6. Install it in a place with good ventilation.
7. Avoid aiming the camera directly towards extremely bright objects such as sun, as this may
damage the CMOS image sensor.
8. Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids,
such as vases, shall be placed on the apparatus.
9. The Mains plug is used as a disconnect device and shall stay readily operable at any time.
10.
When cleaning, do not spray water directly onto parts of the product. doing so may cause
fire or electric shock.
10.
Do not expose the camera to radioactivity. Radioactivity exposure may damage the CMOS.
Available from A1 Security Cameras
6_ safety information
safety information
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions :
1) This device may not cause harmful interference, and
2) This device must accept any interference received including interference that may cause
undesired operation.
CAUTION
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful interference to
radio communications. Operation of this equipment in a residential area is likely to cause
harmful interference in which case the user will be required to correct the interference at
his own expense.
IC Compliance Notice
This Class A digital apparatus meets all requirements of the Canadian
Interference.-Causing Equipment Regulations of ICES-003.
Correct disposal of batteries in this product
(Applicable in the European Union and other European countries with separate battery return systems.)
This marking on the battery, manual or packaging indicates that the batteries in this product should not be
disposed of with other household waste at the end of their working life. Where marked, the chemical symbols
Hg, Cd or Pb indicate that the battery contains mercury, cadmium or lead above the reference levels in EC
Directive 2006/66. If batteries are not properly disposed of, these substances can cause harm to human health
or the environment.
To protect natural resources and to promote material reuse, please separate batteries from other types of waste
and recycle them through your local, free battery return system.
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate collection systems)
This marking on the product, accessories or literature indicates that the product and its electronic accessories
(e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their
working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal,
please separate these items from other types of waste and recycle them responsibly to promote the sustainable
reuse of material resources.
Household users should contact either the retailer where they purchased this product, or their local government
office, for details of where and how they can take these items for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase contract.
This product and its electronic accessories should not be mixed with other commercial wastes for disposal.
Available from A1 Security Cameras
English_7
●safety information
important safety instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean the contaminated area on the product surface with a soft, dry cloth or a damp cloth.
(Do not use a detergent or cosmetic products that contain alcohol, solvents or surfactants
or oil constituents as they may deform or cause damage to the product.)
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s
instructions.
8. Do not install near any heat sources such as radiators, heat registers, or other apparatus
(including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug
has two blades with one wider than the other. A grounding type plug has two blades and
a third grounding prong. The wide blade or the third prong is provided for your safety. If
the provided plug does not fit into your outlet, consult an electrician for replacement of the
obsolete outlet.
10.
Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus.
13. Unplug this apparatus when a card is used. Use caution when moving
the cart/ apparatus combination to avoid injury from tip-over.
14. Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as powersupply
cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or moisture, does not operate normally, or has been
dropped.
15.This product is intended to be supplied by a Listed Power Supply Unit marked “Class 2” or
“LPS” and rated from 12 Vdc, 0.2 A.
16. If you use excessive force when installing the product, the camera may be damaged and
malfunction.If you forcibly install the product using non-compliant tools, the product may be
damaged.
17. Do not install the product in a place where chemical substances or oil mist exists or may
be generated. As edible oils such as soybean oil may damage or warp the product, do not
install the product in the kitchen or near the kitchen table.
This may cause damage to the product.
Available from A1 Security Cameras
8_ safety information
Hanwha Techwin cares for the environment at all product manufacturing stages,
and is taking measures to provide customers with more environmentally friendly
products.
The Eco mark represents Hanwha Techwin’s devotion to creating environmentally
friendly products, and indicates that the product satisfies the EU RoHS Directive.
Apparatus shall not be exposed to dripping or splashing and no objects
filled with liquids, such as vases, shall be placed on the apparatus
18. When installing the product, be careful not to allow the surface of the product to be
stained with chemical substance.
Some chemical solvents such as cleaner or adhesives may cause serious damage to the
product’s surface.
Available from A1 Security Cameras
English_9
●Contents
contents
INTRODUCTION
10
10 Features
11 Components and Accessories
12 Component names and
functions
INSTALLATION
13
13 Before installation
13 Installation
15 Adjusting the monitoring
direction for the camera
CONNECTION
16
16 Connecting to Monitor
16 Connecting to Power
17 Using Coaxial Communications
CAMERA OPERATION
19
19 Menu Configuration
19 Menu Setup
TROUBLESHOOTING
30
30 Troubleshooting
SPECIFICATIONS
31
31 Specifications
33 Dimension
Available from A1 Security Cameras
10_ introduction
introduction
FEATURES
yHigh Resolution
Use of a 2M pixel CMOS device provides clear pictures with a horizontal resolution of
1000TVL.
yExcellent Sensitivity
The built-in high sensitivity COLOR CMOS produces a clear image.
-
Color : 0.3Lux (F1.2, 50IRE); 0.1Lux (F1.2, 30IRE)
B/W : 0.03Lux (F1.2, 50IRE); 0.01Lux (F1.2, 30IRE)
ySSNR4 (Samsung Super Noise Reduction) Function
High performance Chip removes noises of GAIN resulting from the low light level and
shows a vivid, high definition video even in the dark place.
yDay&Night
This camera has a function that automatically selects the mode that is appropriate
for daytime or night-time conditions. The COLOR mode operates in daytime condi-
tions to provide optimum colors, and B/W mode operates in night-time conditions to
enhance the definition of the image.
yPROFILE
You can set a mode according to the camera installation conditions.
- BASIC, DAYNIGHT, BACKLIGHT, ITS, INDOOR, USER
yD-WDR
By adopting a proprietary chip, the camera delivers clear, high quality pictures even
in backlight, by increasing exposure in dark areas while decreasing it in bright areas;
a corrected image with clear details results.
yMiscellaneous Functions
HLC(High Light Compensation), REVERSE , SHARPNESS and PRIVACY functions
are provided.
yCommunication
Coaxial communication methods are supported.
- Coaxial Communications : ACP(Analog Coaxial Protocol)
yOSD
The camera’s OSD is complimented by 16 languages.
- English, Korean, Japanese, German, Italian, French, Spanish, Russian, Czech,
Polish, Romanian, Serbian, Swedish, Danish, Turkish, Portuguese
Available from A1 Security Cameras
English_11
●introduction
COMPONENTS AND ACCESSORIES
Check if the following items are included in the product package.
SCD-6013 Quick Manual
Screws Template
High Resolution Dome Camera
Quick Manual
SCD-6013
12_ introduction
introduction
COMPONENT NAMES AND FUNCTIONS
1
Dome Cover
2
Rotate base : control rotating angle of camera.
3
Lens Module : 2.8mm (F1.8).
4.
Function Setup switch : Display the menu on the screen and move the cursor to four
directions to confirm status or after changing a selected item.
5
Pan Base : Control panning angle of camera.
6
Power Input Connector
7
Video Output Jack : Video signals are output through this port. Connect this port to the
Video IN port of a AHD DVR.
2
7
1
6
5
4
3
English_13
●InstallatIon
BEFORE INSTALLATION
Ensure you read out the following instructions before installing the camera:
yYou have to check whether the location (ceiling or wall) can bear five times the weight of your
camera.
yDon’t let the cable to be caught in improper place or the electric line cover to be damaged.
Otherwise it may cause a breakdown or fire.
yBefore installing your camera, you have to adjust the lens focus, zoom, and switch settings.
yWhen installing your camera, don’t allow any person to approach the installation site.
INSTALLATION
Disassembling
1. Use one hand to hold the camera’s bottom
part and turn the cover counterclockwise with
another hand to separate it.
Installation
14_ Installation
Installation
1. Attach the installation template to the
selected area and punch 2 holes as
shown in the figure.
2. Use the 2 supplied screws to fix the
camera to the 2 punched holes.
`Set the <TOP FRONT> mark
imprinted on the camera to face the
direction of camera monitoring.
3. Adjust the lens in a desired direction by referring to the “Adjusting the
monitoring direction for the camera” section.
4. Attach the dome cover to the main body.
M
`Pay attention to the direction for assembly.
케이블 구멍
English_15
●InstallatIon
ADJUSTING THE MONITORING DIRECTION FOR THE CAMERA
`Adjusting the monitoring direction
You can adjust the camera direction only when the camera is fixed on the ceiling.
Where, rotating the camera unit to the left or right is called Pan, adjusting the tilt
is called Tilt, and turning the lens on its axis is called Rotation.
-The effective range of pan is a total of 354 degrees.
-The effective range of rotation is a total of 355 degrees.
-The effective range of tilt is a total of 68 degrees.
`Methods of adjustment
1. After installing the camera, adjust the panning angle in consideration of the
monitoring direction.
2. Set the horizontal angle so that the image is not reversed.
3. Adjust the tilt angle so that the camera faces toward the monitoring object.
Pan
Tilt Lens rotation
16_ connection
connection
CONNECTING TO MONITOR
Connect the Video OUT port on the rear panel of the camera to a AHD DVR.
yAs the connecting method varies with the instruments, refer to the manual supplied
with the instrument.
yOnly connect the cable when the power is turned off.
CONNECTING TO POWER
You can connect power as shown in the following figure.
SCD-6013
AHD DVR
Power Input Terminal
Monitor
English_17
●connection
When the resistance value of copper wire is at [20°C(68°F)]
Copper wire size (AWG) #24 (0.22mm2)#22 (0.33mm2)#20 (0.52mm2)#18 (0.83mm2)
Resistance value(Ω/m) 0.078 0.050 0.030 0.018
Voltage Drop (V/m) 0.028 0.018 0.011 0.006
yAs shown in the table above, voltage decreases as the wire gets longer.
Therefore use of an excessively long adaptor output line for connection to the camera
may affect the performance of the camera.
※
Standard voltage for camera operation : DC 12V±10%
※
There may be some deviation in voltage drop depending on the type of wire and the
manufacturer.
M
`Be sure to connect power only after all the installation is complete.
USING COAXIAL COMMUNICATIONS
yCoaxial Communications System
yOSD Control method
CAMERA DVR
SET MENU/ENTER
UP UP KEY
DOWN DOWN KEY
LEFT LEFT KEY
RIGHT RIGHT KEY
●
: BNC
connection
18_ connection
Distance
Recommended Cable
Specification
500m 5C2V Coaxial Cable
M`It is recommended that pure copper coax cable is used and not copper coated steel, as this will
cause issues with the communication over the coaxial cable.
`To ensure picture quality, only single-channel video output connector can be used while camera
connected to other video equipments.
- Video Cable
The camera's video output port is connected to the DVR with a BNC coaxial
cable, shown below.
English_19
●Camera OperatiOn
MENU CONFIGURATION
MAIN SETUP
PROFILE
● BASIC ● DAY/NIGHT ● BACKLIGHT
● ITS ● INDOOR ●USER
D-WDR
● ON ● OFF
WHITE BAL
● ATW ● OUTDOOR ● INDOOR
● MANUAL ●
AWC SET
EXPOSURE
● BRIGHTNESS ● SHUTTER ● AGC
● SSNR4 ● RETURN
BACKLIGHT
● OFF ● USER BLC ● HLC
SPECIAL
● DISPLAY ● COMM ADJ ● IMAGE ADJ
● VIDEO OUTPUT ● DAY/NIGHT ● DEFOG
● PRIVACY ● MOTION ● RETURN
EXIT
● SAVE ● NOT SAVE ● RESET
MENU SETUP
For function setting, you can use the function setting switch inside the dome cover.
camera operation
Function Setup switch
20_ camera operation
camera operation
1. Press the Function Setup switch.
yMain SETUP menu is displayed on the monitor screen.
2. Select a desired function using the Function Setup switch.
yPlace the cursor over a desired item.
3. Set up a selected item by using the Function Setup switch.
4. To finish the setting, select ‘EXIT’ and press the Function Setup switch.
M
`An item with the icon also has sub menus. To select a sub menu, select an item with the
icon and press the Function Setup switch.
`An item with the --- icon is unavailable due to function settings.
PROFILE
1. When the SETUP menu screen is displayed, select ‘PROFILE’ by using the Function
Setup switch so that the arrow indicates ‘PROFILE’.
2. Select a desired mode using the
Function Setup switch according to
the picture display you want.
yBASIC : The most common envi-
ronment is set to meet.
yDAY/NIGHT : It will be set
automatically so it
optimizes to the day
or night conditions,
respectively.
yBACKLIGHT : It will be set automatically so you can distinguish the object from
the background in a severe backlighting scene.
yITS : It will be set automatically so you can easily check the traffic conditions.
MAIN SETUP
▶1.
PROFILE BASIC
2. D-WDR ON
3. WHITE BAL ATW
4. EXPOSURE
5. BACKLIGHT OFF
6. SPECIAL
7. EXIT SAVE
Change the status
using the Function
Setup switch.
Select the function
using the Function
Setup switch.
MAIN SETUP
▶1.
PROFILE BASIC
2. D-WDR ON
3. WHITE BAL ATW
4. EXPOSURE
5. BACKLIGHT OFF
6. SPECIAL
7. EXIT SAVE
Table of contents
