Wiseup shop Wifi27 User manual

WIFI27

User Guide

I. Product Overview

1. IR LEDs

2. Speaker

3. Camera Lens

4. Screw Port

II. What’s in the Box

-1× WIFI Toy Robot Camera

-1× DC5V Power Adapter

-1× Wall Bracket Mount

-1× 8GB Micro SD Card (fitted into the Micro SD card slot already)

III. Getting Started

3.1. Plug the DC5V power adapter into the camera, then into an outlet AC power

supply. Wait 15 seconds and the robot camera will say “Ready for configuration”.

If the voice prompt fails, then you need to reset the camera (See VIII).

3.2. “Yoosee” APP Installation

3.2.1. Scan the QR code below to install the “Yoosee” application on your Android

or IOS device.

3.2.2. Use your e-mail address or phone number to sign up for “Yoosee” APP. Make

sure your phone receives SMS text message in order to receive the verification code

during account creation.

IV. Network Configuration

4.1. Method One: Direct Connection

Step 1: Connect the camera directly to your router with a RJ45 Ethernet cable.

Step 2: Make sure that your phone or tablet PC is connected to a stable WIFI net-

work or you can use your mobile network data.

Step 3: Launch the “Yoosee” APP and log in your account.

Step 4: Tap “+” > Tap “Add online device” > Input the camera’s UID (at the bottom

of the robot) and name the camera as you like > Type the default password “123” >

Tap “Save”.

Step 5: The camera will be added successfully if you see it shows online on the

“Device” page. Now you can see live video stream.

4.2. Method Two: Smart Link

Step 1: Make sure that your camera is connected to your WIFI network.

Step 2: Tap “+” > Tap “Smart link” > Input the password of your WIFI network > Tap

“Next”.

Step 3: Tap “Hear a beep for connection” and then click “Next”. It will take 30 sec-

onds to 1 minute to complete the connection.

Step 4: Input the camera UID and default password “123” (at the bottom of the

camera), then tap “Save” to add the camera. The camera will be added successfully

if you see it shows online on the “Device” page. Now you can see live video stream.

[Note]: Check the full-screen live video page below. You can control the camera

within the APP by swiping in the direction you want the camera to move. The camera

is capable of panning 350 degree and you can also tilt the camera lens up and down

45 degrees.

V. Motion Detection Video Recording

>> Make sure that the camera is online on the device list page.

5.1. Launch the “Yoosee” APP.

5.2. How to enable motion detection alert.

Step 1: Tap to lock the screen and will show up > tap the gear icon <

select “Alarm settings”.

Step 2: Enable “Receive alarm prompt”, choose a duration time of siren and turn

on “Motion detection” function.

5.3. How to set up video recording based on motion detection.

Step 1: Go back to “Settings” page and select “Picture and sound”.

Step 2: Choose a proper video format according to your country.

Step 3: Return to the previous page and then tap “Record settings” page.

Step 4: Select “Record alarm” recording mode and then choose your desired video

length from 1, 2 and 3 minutes.

5.4. When motion is detected, the camera siren will sound for a preset time, the

camera will record a video automatically to the Micro SD card on the robot camera

and you will be prompted to respond to the notification page below.

5.5. Return to “Device” page and tap play back icon to play back the video files

right on your phone.

5.6. Or, you can power off the camera and remove the Micro SD card. Insert the

Micro SD card into a card reader and then plug it into your PC computer. All video

files can be accessed in the “npc” folder. You need to use GPlayer to play back

these video files on your PC computer.

[Note]: Video Resolution: 1280×960 Video Format: AV

VI. Scheduled Video Recording

6.1. Run the “Yoosee” APP.

6.2. How to set up continuous video recording.

Step 1: Tap the gear icon on the “Device” page, and select “Picture and sound”.

Step 2: Choose a proper video format according to your country.

Step 3: Return to the previous page, tap “Record settings” and then choose

“Record timer” recording mode and make your own schedule of video recording.

Step 4: A video clip will be generated and saved in the Micro SD card every 30 min-

utes automatically. Follow 4.5 to check out the video files.

VII. Resetting to Factory Default Settings

If for any reason the robot camera stops working or isn’t working properly, you can

reset the camera to restore it back to normal operation.

Operation: When the camera is powered on, use a pin to press and hold the Reset

Button for 10 seconds to reset all settings to factory default. The camera will say

“reset to default settings” and restart automatically with default settings in 10 sec-

onds.

VIII. Changing Administrator & Visitor Password

8.1. Launch the application.

8.2. Tap the gear icon and go to “Security settings” page.

8.3. Choose “Admin password”. On the next page, input the default password

“123”, then enter your new password which must contain 6-30 characters of letters

and digits. Finally, tap “Save” to confirm the change.

5. RJ45 Ethernet Port

6. Reset Button

7. Power Input

8. Micro SD Card Slot

8.4. Go back to “Security settings” page and select “Visitor password”. Input a

password then tap “Save” to confirm the visitor password setting.

IX. Share Your Robot Camera with Family Members

9.1. Make sure your family members download the “Yoosee” APP from their App

store or Google play. (See 3.2)

9.2. They need to sign up for a “Yoosee” account using their own phone number or

email address and follow 4.1 to add the camera.

9.3. If you set a visitor password, you need to tell them about the visitor password.

Otherwise, they cannot access the camera on the APP. Visitors have no access to

system settings.

Frequently Asked Questions

Q1: What media player software should I use to play back the video files on my

PC computer?

A1: You could use the robot’s PC client software or GPlayer to play back the video

files on your PC computer. Here is the download link:

http://www.wiseupshop.com/download?name=wifi27&Submit=++++++++

Q2: How do I reset my camera back to the way I got it?

A2: Reset the camera to factory default. (See VI)

Q3: How many visitors are supported to check live video?

A3: 5

Q4: Why the live video smooth and clear is not smooth and clear enough?

A4: You can choose HD video quality on the live video screen according to your

actual network speed.

Q5: Where can I adjust the buzzer volume?

A5: Click the gear icon on the “Device setting” page and then go to “Picture and

sound” page to adjust the volume.

Q6: Why can’t I sign up?

A6: Make sure the correct country was selected during registration and your smart-

phone can receive SMS text messages.

Q7: Why can’t I log in my camera?

A7: First, ensure your smartphone has a wireless or data connection and can

access the Internet.

Second, your password is case-sensitive and must be at least 3 characters long.

Third, if the suggestions above do not work, tap “Forgot Password” to reset your

password. You will be asked to enter the phone number used to login. An SMS text

message will be sent to the action code and your new password. Use your newly

created password for future logins.

Q8: How to turn on the IR LEDs?

A8: If the illumination around the camera is below 10lux, the IR LEDs will be turned

on automatically.

I. Product Overview

1. IR LEDs

2. Speaker

3. Camera Lens

4. Screw Port

II. What’s in the Box

-1× WIFI Toy Robot Camera

-1× DC5V Power Adapter

-1× Wall Bracket Mount

-1× 8GB Micro SD Card (fitted into the Micro SD card slot already)

III. Getting Started

3.1. Plug the DC5V power adapter into the camera, then into an outlet AC power

supply. Wait 15 seconds and the robot camera will say “Ready for configuration”.

If the voice prompt fails, then you need to reset the camera (See VIII).

3.2. “Yoosee” APP Installation

3.2.1. Scan the QR code below to install the “Yoosee” application on your Android

or IOS device.

3.2.2. Use your e-mail address or phone number to sign up for “Yoosee” APP. Make

sure your phone receives SMS text message in order to receive the verification code

during account creation.

IV. Network Configuration

4.1. Method One: Direct Connection

Step 1: Connect the camera directly to your router with a RJ45 Ethernet cable.

Step 2: Make sure that your phone or tablet PC is connected to a stable WIFI net-

work or you can use your mobile network data.

Step 3: Launch the “Yoosee” APP and log in your account.

Step 4: Tap “+” > Tap “Add online device” > Input the camera’s UID (at the bottom

of the robot) and name the camera as you like > Type the default password “123” >

Tap “Save”.

Step 5: The camera will be added successfully if you see it shows online on the

“Device” page. Now you can see live video stream.

4.2. Method Two: Smart Link

Step 1: Make sure that your camera is connected to your WIFI network.

Step 2: Tap “+” > Tap “Smart link” > Input the password of your WIFI network > Tap

“Next”.

Step 3: Tap “Hear a beep for connection” and then click “Next”. It will take 30 sec-

onds to 1 minute to complete the connection.

Step 4: Input the camera UID and default password “123” (at the bottom of the

camera), then tap “Save” to add the camera. The camera will be added successfully

if you see it shows online on the “Device” page. Now you can see live video stream.

[Note]: Check the full-screen live video page below. You can control the camera

within the APP by swiping in the direction you want the camera to move. The camera

is capable of panning 350 degree and you can also tilt the camera lens up and down

45 degrees.

V. Motion Detection Video Recording

>> Make sure that the camera is online on the device list page.

5.1. Launch the “Yoosee” APP.

5.2. How to enable motion detection alert.

Step 1: Tap to lock the screen and will show up > tap the gear icon <

select “Alarm settings”.

Step 2: Enable “Receive alarm prompt”, choose a duration time of siren and turn

on “Motion detection” function.

5.3. How to set up video recording based on motion detection.

Step 1: Go back to “Settings” page and select “Picture and sound”.

Step 2: Choose a proper video format according to your country.

Step 3: Return to the previous page and then tap “Record settings” page.

Step 4: Select “Record alarm” recording mode and then choose your desired video

length from 1, 2 and 3 minutes.

5.4. When motion is detected, the camera siren will sound for a preset time, the

camera will record a video automatically to the Micro SD card on the robot camera

and you will be prompted to respond to the notification page below.

5.5. Return to “Device” page and tap play back icon to play back the video files

right on your phone.

5.6. Or, you can power off the camera and remove the Micro SD card. Insert the

Micro SD card into a card reader and then plug it into your PC computer. All video

files can be accessed in the “npc” folder. You need to use GPlayer to play back

these video files on your PC computer.

[Note]: Video Resolution: 1280×960 Video Format: AV

VI. Scheduled Video Recording

6.1. Run the “Yoosee” APP.

6.2. How to set up continuous video recording.

Step 1: Tap the gear icon on the “Device” page, and select “Picture and sound”.

Step 2: Choose a proper video format according to your country.

Step 3: Return to the previous page, tap “Record settings” and then choose

“Record timer” recording mode and make your own schedule of video recording.

Step 4: A video clip will be generated and saved in the Micro SD card every 30 min-

utes automatically. Follow 4.5 to check out the video files.

VII. Resetting to Factory Default Settings

If for any reason the robot camera stops working or isn’t working properly, you can

reset the camera to restore it back to normal operation.

Operation: When the camera is powered on, use a pin to press and hold the Reset

Button for 10 seconds to reset all settings to factory default. The camera will say

“reset to default settings” and restart automatically with default settings in 10 sec-

onds.

VIII. Changing Administrator & Visitor Password

8.1. Launch the application.

8.2. Tap the gear icon and go to “Security settings” page.

8.3. Choose “Admin password”. On the next page, input the default password

“123”, then enter your new password which must contain 6-30 characters of letters

and digits. Finally, tap “Save” to confirm the change.

8.4. Go back to “Security settings” page and select “Visitor password”. Input a

password then tap “Save” to confirm the visitor password setting.

IX. Share Your Robot Camera with Family Members

9.1. Make sure your family members download the “Yoosee” APP from their App

store or Google play. (See 3.2)

9.2. They need to sign up for a “Yoosee” account using their own phone number or

email address and follow 4.1 to add the camera.

9.3. If you set a visitor password, you need to tell them about the visitor password.

Otherwise, they cannot access the camera on the APP. Visitors have no access to

system settings.

Frequently Asked Questions

Q1: What media player software should I use to play back the video files on my

PC computer?

A1: You could use the robot’s PC client software or GPlayer to play back the video

files on your PC computer. Here is the download link:

http://www.wiseupshop.com/download?name=wifi27&Submit=++++++++

Q2: How do I reset my camera back to the way I got it?

A2: Reset the camera to factory default. (See VI)

Q3: How many visitors are supported to check live video?

A3: 5

Q4: Why the live video smooth and clear is not smooth and clear enough?

A4: You can choose HD video quality on the live video screen according to your

actual network speed.

Q5: Where can I adjust the buzzer volume?

A5: Click the gear icon on the “Device setting” page and then go to “Picture and

sound” page to adjust the volume.

Q6: Why can’t I sign up?

A6: Make sure the correct country was selected during registration and your smart-

phone can receive SMS text messages.

Q7: Why can’t I log in my camera?

A7: First, ensure your smartphone has a wireless or data connection and can

access the Internet.

Second, your password is case-sensitive and must be at least 3 characters long.

Third, if the suggestions above do not work, tap “Forgot Password” to reset your

password. You will be asked to enter the phone number used to login. An SMS text

message will be sent to the action code and your new password. Use your newly

created password for future logins.

Q8: How to turn on the IR LEDs?

A8: If the illumination around the camera is below 10lux, the IR LEDs will be turned

on automatically.

I. Product Overview

1. IR LEDs

2. Speaker

3. Camera Lens

4. Screw Port

II. What’s in the Box

-1× WIFI Toy Robot Camera

-1× DC5V Power Adapter

-1× Wall Bracket Mount

-1× 8GB Micro SD Card (fitted into the Micro SD card slot already)

III. Getting Started

3.1. Plug the DC5V power adapter into the camera, then into an outlet AC power

supply. Wait 15 seconds and the robot camera will say “Ready for configuration”.

If the voice prompt fails, then you need to reset the camera (See VIII).

3.2. “Yoosee” APP Installation

3.2.1. Scan the QR code below to install the “Yoosee” application on your Android

or IOS device.

3.2.2. Use your e-mail address or phone number to sign up for “Yoosee” APP. Make

sure your phone receives SMS text message in order to receive the verification code

during account creation.

IV. Network Configuration

4.1. Method One: Direct Connection

Step 1: Connect the camera directly to your router with a RJ45 Ethernet cable.

Step 2: Make sure that your phone or tablet PC is connected to a stable WIFI net-

work or you can use your mobile network data.

Step 3: Launch the “Yoosee” APP and log in your account.

Step 4: Tap “+” > Tap “Add online device” > Input the camera’s UID (at the bottom

of the robot) and name the camera as you like > Type the default password “123” >

Tap “Save”.

Step 5: The camera will be added successfully if you see it shows online on the

“Device” page. Now you can see live video stream.

4.2. Method Two: Smart Link

Step 1: Make sure that your camera is connected to your WIFI network.

Step 2: Tap “+” > Tap “Smart link” > Input the password of your WIFI network > Tap

“Next”.

Step 3: Tap “Hear a beep for connection” and then click “Next”. It will take 30 sec-

onds to 1 minute to complete the connection.

Step 4: Input the camera UID and default password “123” (at the bottom of the

camera), then tap “Save” to add the camera. The camera will be added successfully

if you see it shows online on the “Device” page. Now you can see live video stream.

[Note]: Check the full-screen live video page below. You can control the camera

within the APP by swiping in the direction you want the camera to move. The camera

is capable of panning 350 degree and you can also tilt the camera lens up and down

45 degrees.

V. Motion Detection Video Recording

>> Make sure that the camera is online on the device list page.

5.1. Launch the “Yoosee” APP.

5.2. How to enable motion detection alert.

Step 1: Tap to lock the screen and will show up > tap the gear icon <

select “Alarm settings”.

Step 2: Enable “Receive alarm prompt”, choose a duration time of siren and turn

on “Motion detection” function.

5.3. How to set up video recording based on motion detection.

Step 1: Go back to “Settings” page and select “Picture and sound”.

Step 2: Choose a proper video format according to your country.

Step 3: Return to the previous page and then tap “Record settings” page.

Step 4: Select “Record alarm” recording mode and then choose your desired video

length from 1, 2 and 3 minutes.

5.4. When motion is detected, the camera siren will sound for a preset time, the

camera will record a video automatically to the Micro SD card on the robot camera

and you will be prompted to respond to the notification page below.

5.5. Return to “Device” page and tap play back icon to play back the video files

right on your phone.

5.6. Or, you can power off the camera and remove the Micro SD card. Insert the

Micro SD card into a card reader and then plug it into your PC computer. All video

files can be accessed in the “npc” folder. You need to use GPlayer to play back

these video files on your PC computer.

[Note]: Video Resolution: 1280×960 Video Format: AV

VI. Scheduled Video Recording

6.1. Run the “Yoosee” APP.

6.2. How to set up continuous video recording.

Step 1: Tap the gear icon on the “Device” page, and select “Picture and sound”.

Step 2: Choose a proper video format according to your country.

Step 3: Return to the previous page, tap “Record settings” and then choose

“Record timer” recording mode and make your own schedule of video recording.

Step 4: A video clip will be generated and saved in the Micro SD card every 30 min-

utes automatically. Follow 4.5 to check out the video files.

VII. Resetting to Factory Default Settings

If for any reason the robot camera stops working or isn’t working properly, you can

reset the camera to restore it back to normal operation.

Operation: When the camera is powered on, use a pin to press and hold the Reset

Button for 10 seconds to reset all settings to factory default. The camera will say

“reset to default settings” and restart automatically with default settings in 10 sec-

onds.

VIII. Changing Administrator & Visitor Password

8.1. Launch the application.

8.2. Tap the gear icon and go to “Security settings” page.

8.3. Choose “Admin password”. On the next page, input the default password

“123”, then enter your new password which must contain 6-30 characters of letters

and digits. Finally, tap “Save” to confirm the change.

8.4. Go back to “Security settings” page and select “Visitor password”. Input a

password then tap “Save” to confirm the visitor password setting.

IX. Share Your Robot Camera with Family Members

9.1. Make sure your family members download the “Yoosee” APP from their App

store or Google play. (See 3.2)

9.2. They need to sign up for a “Yoosee” account using their own phone number or

email address and follow 4.1 to add the camera.

9.3. If you set a visitor password, you need to tell them about the visitor password.

Otherwise, they cannot access the camera on the APP. Visitors have no access to

system settings.

Frequently Asked Questions

Q1: What media player software should I use to play back the video files on my

PC computer?

A1: You could use the robot’s PC client software or GPlayer to play back the video

files on your PC computer. Here is the download link:

http://www.wiseupshop.com/download?name=wifi27&Submit=++++++++

Q2: How do I reset my camera back to the way I got it?

A2: Reset the camera to factory default. (See VI)

Q3: How many visitors are supported to check live video?

A3: 5

Q4: Why the live video smooth and clear is not smooth and clear enough?

A4: You can choose HD video quality on the live video screen according to your

actual network speed.

Q5: Where can I adjust the buzzer volume?

A5: Click the gear icon on the “Device setting” page and then go to “Picture and

sound” page to adjust the volume.

Q6: Why can’t I sign up?

A6: Make sure the correct country was selected during registration and your smart-

phone can receive SMS text messages.

Q7: Why can’t I log in my camera?

A7: First, ensure your smartphone has a wireless or data connection and can

access the Internet.

Second, your password is case-sensitive and must be at least 3 characters long.

Third, if the suggestions above do not work, tap “Forgot Password” to reset your

password. You will be asked to enter the phone number used to login. An SMS text

message will be sent to the action code and your new password. Use your newly

created password for future logins.

Q8: How to turn on the IR LEDs?

A8: If the illumination around the camera is below 10lux, the IR LEDs will be turned

on automatically.

I. Product Overview

1. IR LEDs

2. Speaker

3. Camera Lens

4. Screw Port

II. What’s in the Box

-1× WIFI Toy Robot Camera

-1× DC5V Power Adapter

-1× Wall Bracket Mount

-1× 8GB Micro SD Card (fitted into the Micro SD card slot already)

III. Getting Started

3.1. Plug the DC5V power adapter into the camera, then into an outlet AC power

supply. Wait 15 seconds and the robot camera will say “Ready for configuration”.

If the voice prompt fails, then you need to reset the camera (See VIII).

3.2. “Yoosee” APP Installation

3.2.1. Scan the QR code below to install the “Yoosee” application on your Android

or IOS device.

3.2.2. Use your e-mail address or phone number to sign up for “Yoosee” APP. Make

sure your phone receives SMS text message in order to receive the verification code

during account creation.

IV. Network Configuration

4.1. Method One: Direct Connection

Step 1: Connect the camera directly to your router with a RJ45 Ethernet cable.

Step 2: Make sure that your phone or tablet PC is connected to a stable WIFI net-

work or you can use your mobile network data.

Step 3: Launch the “Yoosee” APP and log in your account.

Step 4: Tap “+” > Tap “Add online device” > Input the camera’s UID (at the bottom

of the robot) and name the camera as you like > Type the default password “123” >

Tap “Save”.

Step 5: The camera will be added successfully if you see it shows online on the

“Device” page. Now you can see live video stream.

4.2. Method Two: Smart Link

Step 1: Make sure that your camera is connected to your WIFI network.

Step 2: Tap “+” > Tap “Smart link” > Input the password of your WIFI network > Tap

“Next”.

Step 3: Tap “Hear a beep for connection” and then click “Next”. It will take 30 sec-

onds to 1 minute to complete the connection.

Step 4: Input the camera UID and default password “123” (at the bottom of the

camera), then tap “Save” to add the camera. The camera will be added successfully

if you see it shows online on the “Device” page. Now you can see live video stream.

[Note]: Check the full-screen live video page below. You can control the camera

within the APP by swiping in the direction you want the camera to move. The camera

is capable of panning 350 degree and you can also tilt the camera lens up and down

45 degrees.

V. Motion Detection Video Recording

>> Make sure that the camera is online on the device list page.

5.1. Launch the “Yoosee” APP.

5.2. How to enable motion detection alert.

Step 1: Tap to lock the screen and will show up > tap the gear icon <

select “Alarm settings”.

Step 2: Enable “Receive alarm prompt”, choose a duration time of siren and turn

on “Motion detection” function.

5.3. How to set up video recording based on motion detection.

Step 1: Go back to “Settings” page and select “Picture and sound”.

Step 2: Choose a proper video format according to your country.

Step 3: Return to the previous page and then tap “Record settings” page.

Step 4: Select “Record alarm” recording mode and then choose your desired video

length from 1, 2 and 3 minutes.

5.4. When motion is detected, the camera siren will sound for a preset time, the

camera will record a video automatically to the Micro SD card on the robot camera

and you will be prompted to respond to the notification page below.

5.5. Return to “Device” page and tap play back icon to play back the video files

right on your phone.

5.6. Or, you can power off the camera and remove the Micro SD card. Insert the

Micro SD card into a card reader and then plug it into your PC computer. All video

files can be accessed in the “npc” folder. You need to use GPlayer to play back

these video files on your PC computer.

[Note]: Video Resolution: 1280×960 Video Format: AV

VI. Scheduled Video Recording

6.1. Run the “Yoosee” APP.

6.2. How to set up continuous video recording.

Step 1: Tap the gear icon on the “Device” page, and select “Picture and sound”.

Step 2: Choose a proper video format according to your country.

Step 3: Return to the previous page, tap “Record settings” and then choose

“Record timer” recording mode and make your own schedule of video recording.

Step 4: A video clip will be generated and saved in the Micro SD card every 30 min-

utes automatically. Follow 4.5 to check out the video files.

VII. Resetting to Factory Default Settings

If for any reason the robot camera stops working or isn’t working properly, you can

reset the camera to restore it back to normal operation.

Operation: When the camera is powered on, use a pin to press and hold the Reset

Button for 10 seconds to reset all settings to factory default. The camera will say

“reset to default settings” and restart automatically with default settings in 10 sec-

onds.

VIII. Changing Administrator & Visitor Password

8.1. Launch the application.

8.2. Tap the gear icon and go to “Security settings” page.

8.3. Choose “Admin password”. On the next page, input the default password

“123”, then enter your new password which must contain 6-30 characters of letters

and digits. Finally, tap “Save” to confirm the change.

8.4. Go back to “Security settings” page and select “Visitor password”. Input a

password then tap “Save” to confirm the visitor password setting.

IX. Share Your Robot Camera with Family Members

9.1. Make sure your family members download the “Yoosee” APP from their App

store or Google play. (See 3.2)

9.2. They need to sign up for a “Yoosee” account using their own phone number or

email address and follow 4.1 to add the camera.

9.3. If you set a visitor password, you need to tell them about the visitor password.

Otherwise, they cannot access the camera on the APP. Visitors have no access to

system settings.

Frequently Asked Questions

Q1: What media player software should I use to play back the video files on my

PC computer?

A1: You could use the robot’s PC client software or GPlayer to play back the video

files on your PC computer. Here is the download link:

http://www.wiseupshop.com/download?name=wifi27&Submit=++++++++

Q2: How do I reset my camera back to the way I got it?

A2: Reset the camera to factory default. (See VI)

Q3: How many visitors are supported to check live video?

A3: 5

Q4: Why the live video smooth and clear is not smooth and clear enough?

A4: You can choose HD video quality on the live video screen according to your

actual network speed.

Q5: Where can I adjust the buzzer volume?

A5: Click the gear icon on the “Device setting” page and then go to “Picture and

sound” page to adjust the volume.

Q6: Why can’t I sign up?

A6: Make sure the correct country was selected during registration and your smart-

phone can receive SMS text messages.

Q7: Why can’t I log in my camera?

A7: First, ensure your smartphone has a wireless or data connection and can

access the Internet.

Second, your password is case-sensitive and must be at least 3 characters long.

Third, if the suggestions above do not work, tap “Forgot Password” to reset your

password. You will be asked to enter the phone number used to login. An SMS text

message will be sent to the action code and your new password. Use your newly

created password for future logins.

Q8: How to turn on the IR LEDs?

A8: If the illumination around the camera is below 10lux, the IR LEDs will be turned

on automatically.

I. Product Overview

1. IR LEDs

2. Speaker

3. Camera Lens

4. Screw Port

II. What’s in the Box

-1× WIFI Toy Robot Camera

-1× DC5V Power Adapter

-1× Wall Bracket Mount

-1× 8GB Micro SD Card (fitted into the Micro SD card slot already)

III. Getting Started

3.1. Plug the DC5V power adapter into the camera, then into an outlet AC power

supply. Wait 15 seconds and the robot camera will say “Ready for configuration”.

If the voice prompt fails, then you need to reset the camera (See VIII).

3.2. “Yoosee” APP Installation

3.2.1. Scan the QR code below to install the “Yoosee” application on your Android

or IOS device.

3.2.2. Use your e-mail address or phone number to sign up for “Yoosee” APP. Make

sure your phone receives SMS text message in order to receive the verification code

during account creation.

IV. Network Configuration

4.1. Method One: Direct Connection

Step 1: Connect the camera directly to your router with a RJ45 Ethernet cable.

Step 2: Make sure that your phone or tablet PC is connected to a stable WIFI net-

work or you can use your mobile network data.

Step 3: Launch the “Yoosee” APP and log in your account.

Step 4: Tap “+” > Tap “Add online device” > Input the camera’s UID (at the bottom

of the robot) and name the camera as you like > Type the default password “123” >

Tap “Save”.

Step 5: The camera will be added successfully if you see it shows online on the

“Device” page. Now you can see live video stream.

4.2. Method Two: Smart Link

Step 1: Make sure that your camera is connected to your WIFI network.

Step 2: Tap “+” > Tap “Smart link” > Input the password of your WIFI network > Tap

“Next”.

Step 3: Tap “Hear a beep for connection” and then click “Next”. It will take 30 sec-

onds to 1 minute to complete the connection.

Step 4: Input the camera UID and default password “123” (at the bottom of the

camera), then tap “Save” to add the camera. The camera will be added successfully

if you see it shows online on the “Device” page. Now you can see live video stream.

[Note]: Check the full-screen live video page below. You can control the camera

within the APP by swiping in the direction you want the camera to move. The camera

is capable of panning 350 degree and you can also tilt the camera lens up and down

45 degrees.

V. Motion Detection Video Recording

>> Make sure that the camera is online on the device list page.

5.1. Launch the “Yoosee” APP.

5.2. How to enable motion detection alert.

Step 1: Tap to lock the screen and will show up > tap the gear icon <

select “Alarm settings”.

Step 2: Enable “Receive alarm prompt”, choose a duration time of siren and turn

on “Motion detection” function.

5.3. How to set up video recording based on motion detection.

Step 1: Go back to “Settings” page and select “Picture and sound”.

Step 2: Choose a proper video format according to your country.

Step 3: Return to the previous page and then tap “Record settings” page.

Step 4: Select “Record alarm” recording mode and then choose your desired video

length from 1, 2 and 3 minutes.

5.4. When motion is detected, the camera siren will sound for a preset time, the

camera will record a video automatically to the Micro SD card on the robot camera

and you will be prompted to respond to the notification page below.

5.5. Return to “Device” page and tap play back icon to play back the video files

right on your phone.

5.6. Or, you can power off the camera and remove the Micro SD card. Insert the

Micro SD card into a card reader and then plug it into your PC computer. All video

files can be accessed in the “npc” folder. You need to use GPlayer to play back

these video files on your PC computer.

[Note]: Video Resolution: 1280×960 Video Format: AV

VI. Scheduled Video Recording

6.1. Run the “Yoosee” APP.

6.2. How to set up continuous video recording.

Step 1: Tap the gear icon on the “Device” page, and select “Picture and sound”.

Step 2: Choose a proper video format according to your country.

Step 3: Return to the previous page, tap “Record settings” and then choose

“Record timer” recording mode and make your own schedule of video recording.

Step 4: A video clip will be generated and saved in the Micro SD card every 30 min-

utes automatically. Follow 4.5 to check out the video files.

VII. Resetting to Factory Default Settings

If for any reason the robot camera stops working or isn’t working properly, you can

reset the camera to restore it back to normal operation.

Operation: When the camera is powered on, use a pin to press and hold the Reset

Button for 10 seconds to reset all settings to factory default. The camera will say

“reset to default settings” and restart automatically with default settings in 10 sec-

onds.

VIII. Changing Administrator & Visitor Password

8.1. Launch the application.

8.2. Tap the gear icon and go to “Security settings” page.

8.3. Choose “Admin password”. On the next page, input the default password

“123”, then enter your new password which must contain 6-30 characters of letters

and digits. Finally, tap “Save” to confirm the change.

8.4. Go back to “Security settings” page and select “Visitor password”. Input a

password then tap “Save” to confirm the visitor password setting.

IX. Share Your Robot Camera with Family Members

9.1. Make sure your family members download the “Yoosee” APP from their App

store or Google play. (See 3.2)

9.2. They need to sign up for a “Yoosee” account using their own phone number or

email address and follow 4.1 to add the camera.

9.3. If you set a visitor password, you need to tell them about the visitor password.

Otherwise, they cannot access the camera on the APP. Visitors have no access to

system settings.

Frequently Asked Questions

Q1: What media player software should I use to play back the video files on my

PC computer?

A1: You could use the robot’s PC client software or GPlayer to play back the video

files on your PC computer. Here is the download link:

http://www.wiseupshop.com/download?name=wifi27&Submit=++++++++

Q2: How do I reset my camera back to the way I got it?

A2: Reset the camera to factory default. (See VI)

Q3: How many visitors are supported to check live video?

A3: 5

Q4: Why the live video smooth and clear is not smooth and clear enough?

A4: You can choose HD video quality on the live video screen according to your

actual network speed.

Q5: Where can I adjust the buzzer volume?

A5: Click the gear icon on the “Device setting” page and then go to “Picture and

sound” page to adjust the volume.

Q6: Why can’t I sign up?

A6: Make sure the correct country was selected during registration and your smart-

phone can receive SMS text messages.

Q7: Why can’t I log in my camera?

A7: First, ensure your smartphone has a wireless or data connection and can

access the Internet.

Second, your password is case-sensitive and must be at least 3 characters long.

Third, if the suggestions above do not work, tap “Forgot Password” to reset your

password. You will be asked to enter the phone number used to login. An SMS text

message will be sent to the action code and your new password. Use your newly

created password for future logins.

Q8: How to turn on the IR LEDs?

A8: If the illumination around the camera is below 10lux, the IR LEDs will be turned

on automatically.

I. Product Overview

1. IR LEDs

2. Speaker

3. Camera Lens

4. Screw Port

II. What’s in the Box

-1× WIFI Toy Robot Camera

-1× DC5V Power Adapter

-1× Wall Bracket Mount

-1× 8GB Micro SD Card (fitted into the Micro SD card slot already)

III. Getting Started

3.1. Plug the DC5V power adapter into the camera, then into an outlet AC power

supply. Wait 15 seconds and the robot camera will say “Ready for configuration”.

If the voice prompt fails, then you need to reset the camera (See VIII).

3.2. “Yoosee” APP Installation

3.2.1. Scan the QR code below to install the “Yoosee” application on your Android

or IOS device.

3.2.2. Use your e-mail address or phone number to sign up for “Yoosee” APP. Make

sure your phone receives SMS text message in order to receive the verification code

during account creation.

IV. Network Configuration

4.1. Method One: Direct Connection

Step 1: Connect the camera directly to your router with a RJ45 Ethernet cable.

Step 2: Make sure that your phone or tablet PC is connected to a stable WIFI net-

work or you can use your mobile network data.

Step 3: Launch the “Yoosee” APP and log in your account.

Step 4: Tap “+” > Tap “Add online device” > Input the camera’s UID (at the bottom

of the robot) and name the camera as you like > Type the default password “123” >

Tap “Save”.

Step 5: The camera will be added successfully if you see it shows online on the

“Device” page. Now you can see live video stream.

4.2. Method Two: Smart Link

Step 1: Make sure that your camera is connected to your WIFI network.

Step 2: Tap “+” > Tap “Smart link” > Input the password of your WIFI network > Tap

“Next”.

Step 3: Tap “Hear a beep for connection” and then click “Next”. It will take 30 sec-

onds to 1 minute to complete the connection.

Step 4: Input the camera UID and default password “123” (at the bottom of the

camera), then tap “Save” to add the camera. The camera will be added successfully

if you see it shows online on the “Device” page. Now you can see live video stream.

[Note]: Check the full-screen live video page below. You can control the camera

within the APP by swiping in the direction you want the camera to move. The camera

is capable of panning 350 degree and you can also tilt the camera lens up and down

45 degrees.

V. Motion Detection Video Recording

>> Make sure that the camera is online on the device list page.

5.1. Launch the “Yoosee” APP.

5.2. How to enable motion detection alert.

Step 1: Tap to lock the screen and will show up > tap the gear icon <

select “Alarm settings”.

Step 2: Enable “Receive alarm prompt”, choose a duration time of siren and turn

on “Motion detection” function.

5.3. How to set up video recording based on motion detection.

Step 1: Go back to “Settings” page and select “Picture and sound”.

Step 2: Choose a proper video format according to your country.

Step 3: Return to the previous page and then tap “Record settings” page.

Step 4: Select “Record alarm” recording mode and then choose your desired video

length from 1, 2 and 3 minutes.

5.4. When motion is detected, the camera siren will sound for a preset time, the

camera will record a video automatically to the Micro SD card on the robot camera

and you will be prompted to respond to the notification page below.

5.5. Return to “Device” page and tap play back icon to play back the video files

right on your phone.

5.6. Or, you can power off the camera and remove the Micro SD card. Insert the

Micro SD card into a card reader and then plug it into your PC computer. All video

files can be accessed in the “npc” folder. You need to use GPlayer to play back

these video files on your PC computer.

[Note]: Video Resolution: 1280×960 Video Format: AV

VI. Scheduled Video Recording

6.1. Run the “Yoosee” APP.

6.2. How to set up continuous video recording.

Step 1: Tap the gear icon on the “Device” page, and select “Picture and sound”.

Step 2: Choose a proper video format according to your country.

Step 3: Return to the previous page, tap “Record settings” and then choose

“Record timer” recording mode and make your own schedule of video recording.

Step 4: A video clip will be generated and saved in the Micro SD card every 30 min-

utes automatically. Follow 4.5 to check out the video files.

VII. Resetting to Factory Default Settings

If for any reason the robot camera stops working or isn’t working properly, you can

reset the camera to restore it back to normal operation.

Operation: When the camera is powered on, use a pin to press and hold the Reset

Button for 10 seconds to reset all settings to factory default. The camera will say

“reset to default settings” and restart automatically with default settings in 10 sec-

onds.

VIII. Changing Administrator & Visitor Password

8.1. Launch the application.

8.2. Tap the gear icon and go to “Security settings” page.

8.3. Choose “Admin password”. On the next page, input the default password

“123”, then enter your new password which must contain 6-30 characters of letters

and digits. Finally, tap “Save” to confirm the change.

8.4. Go back to “Security settings” page and select “Visitor password”. Input a

password then tap “Save” to confirm the visitor password setting.

IX. Share Your Robot Camera with Family Members

9.1. Make sure your family members download the “Yoosee” APP from their App

store or Google play. (See 3.2)

9.2. They need to sign up for a “Yoosee” account using their own phone number or

email address and follow 4.1 to add the camera.

9.3. If you set a visitor password, you need to tell them about the visitor password.

Otherwise, they cannot access the camera on the APP. Visitors have no access to

system settings.

Frequently Asked Questions

Q1: What media player software should I use to play back the video files on my

PC computer?

A1: You could use the robot’s PC client software or GPlayer to play back the video

files on your PC computer. Here is the download link:

http://www.wiseupshop.com/download?name=wifi27&Submit=++++++++

Q2: How do I reset my camera back to the way I got it?

A2: Reset the camera to factory default. (See VI)

Q3: How many visitors are supported to check live video?

A3: 5

Q4: Why the live video smooth and clear is not smooth and clear enough?

A4: You can choose HD video quality on the live video screen according to your

actual network speed.

Q5: Where can I adjust the buzzer volume?

A5: Click the gear icon on the “Device setting” page and then go to “Picture and

sound” page to adjust the volume.

Q6: Why can’t I sign up?

A6: Make sure the correct country was selected during registration and your smart-

phone can receive SMS text messages.

Q7: Why can’t I log in my camera?

A7: First, ensure your smartphone has a wireless or data connection and can

access the Internet.

Second, your password is case-sensitive and must be at least 3 characters long.

Third, if the suggestions above do not work, tap “Forgot Password” to reset your

password. You will be asked to enter the phone number used to login. An SMS text

message will be sent to the action code and your new password. Use your newly

created password for future logins.

Q8: How to turn on the IR LEDs?

A8: If the illumination around the camera is below 10lux, the IR LEDs will be turned

on automatically.

I. Product Overview

1. IR LEDs

2. Speaker

3. Camera Lens

4. Screw Port

II. What’s in the Box

-1× WIFI Toy Robot Camera

-1× DC5V Power Adapter

-1× Wall Bracket Mount

-1× 8GB Micro SD Card (fitted into the Micro SD card slot already)

III. Getting Started

3.1. Plug the DC5V power adapter into the camera, then into an outlet AC power

supply. Wait 15 seconds and the robot camera will say “Ready for configuration”.

If the voice prompt fails, then you need to reset the camera (See VIII).

3.2. “Yoosee” APP Installation

3.2.1. Scan the QR code below to install the “Yoosee” application on your Android

or IOS device.

3.2.2. Use your e-mail address or phone number to sign up for “Yoosee” APP. Make

sure your phone receives SMS text message in order to receive the verification code

during account creation.

IV. Network Configuration

4.1. Method One: Direct Connection

Step 1: Connect the camera directly to your router with a RJ45 Ethernet cable.

Step 2: Make sure that your phone or tablet PC is connected to a stable WIFI net-

work or you can use your mobile network data.

Step 3: Launch the “Yoosee” APP and log in your account.

Step 4: Tap “+” > Tap “Add online device” > Input the camera’s UID (at the bottom

of the robot) and name the camera as you like > Type the default password “123” >

Tap “Save”.

Step 5: The camera will be added successfully if you see it shows online on the

“Device” page. Now you can see live video stream.

4.2. Method Two: Smart Link

Step 1: Make sure that your camera is connected to your WIFI network.

Step 2: Tap “+” > Tap “Smart link” > Input the password of your WIFI network > Tap

“Next”.

Step 3: Tap “Hear a beep for connection” and then click “Next”. It will take 30 sec-

onds to 1 minute to complete the connection.

Step 4: Input the camera UID and default password “123” (at the bottom of the

camera), then tap “Save” to add the camera. The camera will be added successfully

if you see it shows online on the “Device” page. Now you can see live video stream.

[Note]: Check the full-screen live video page below. You can control the camera

within the APP by swiping in the direction you want the camera to move. The camera

is capable of panning 350 degree and you can also tilt the camera lens up and down

45 degrees.

V. Motion Detection Video Recording

>> Make sure that the camera is online on the device list page.

5.1. Launch the “Yoosee” APP.

5.2. How to enable motion detection alert.

Step 1: Tap to lock the screen and will show up > tap the gear icon <

select “Alarm settings”.

Step 2: Enable “Receive alarm prompt”, choose a duration time of siren and turn

on “Motion detection” function.

5.3. How to set up video recording based on motion detection.

Step 1: Go back to “Settings” page and select “Picture and sound”.

Step 2: Choose a proper video format according to your country.

Step 3: Return to the previous page and then tap “Record settings” page.

Step 4: Select “Record alarm” recording mode and then choose your desired video

length from 1, 2 and 3 minutes.

5.4. When motion is detected, the camera siren will sound for a preset time, the

camera will record a video automatically to the Micro SD card on the robot camera

and you will be prompted to respond to the notification page below.

5.5. Return to “Device” page and tap play back icon to play back the video files

right on your phone.

5.6. Or, you can power off the camera and remove the Micro SD card. Insert the

Micro SD card into a card reader and then plug it into your PC computer. All video

files can be accessed in the “npc” folder. You need to use GPlayer to play back

these video files on your PC computer.

[Note]: Video Resolution: 1280×960 Video Format: AV

VI. Scheduled Video Recording

6.1. Run the “Yoosee” APP.

6.2. How to set up continuous video recording.

Step 1: Tap the gear icon on the “Device” page, and select “Picture and sound”.

Step 2: Choose a proper video format according to your country.

Step 3: Return to the previous page, tap “Record settings” and then choose

“Record timer” recording mode and make your own schedule of video recording.

Step 4: A video clip will be generated and saved in the Micro SD card every 30 min-

utes automatically. Follow 4.5 to check out the video files.

VII. Resetting to Factory Default Settings

If for any reason the robot camera stops working or isn’t working properly, you can

reset the camera to restore it back to normal operation.

Operation: When the camera is powered on, use a pin to press and hold the Reset

Button for 10 seconds to reset all settings to factory default. The camera will say

“reset to default settings” and restart automatically with default settings in 10 sec-

onds.

VIII. Changing Administrator & Visitor Password

8.1. Launch the application.

8.2. Tap the gear icon and go to “Security settings” page.

8.3. Choose “Admin password”. On the next page, input the default password

“123”, then enter your new password which must contain 6-30 characters of letters

and digits. Finally, tap “Save” to confirm the change.

8.4. Go back to “Security settings” page and select “Visitor password”. Input a

password then tap “Save” to confirm the visitor password setting.

IX. Share Your Robot Camera with Family Members

9.1. Make sure your family members download the “Yoosee” APP from their App

store or Google play. (See 3.2)

9.2. They need to sign up for a “Yoosee” account using their own phone number or

email address and follow 4.1 to add the camera.

9.3. If you set a visitor password, you need to tell them about the visitor password.

Otherwise, they cannot access the camera on the APP. Visitors have no access to

system settings.

Frequently Asked Questions

Q1: What media player software should I use to play back the video files on my

PC computer?

A1: You could use the robot’s PC client software or GPlayer to play back the video

files on your PC computer. Here is the download link:

http://www.wiseupshop.com/download?name=wifi27&Submit=++++++++

Q2: How do I reset my camera back to the way I got it?

A2: Reset the camera to factory default. (See VI)

Q3: How many visitors are supported to check live video?

A3: 5

Q4: Why the live video smooth and clear is not smooth and clear enough?

A4: You can choose HD video quality on the live video screen according to your

actual network speed.

Q5: Where can I adjust the buzzer volume?

A5: Click the gear icon on the “Device setting” page and then go to “Picture and

sound” page to adjust the volume.

Q6: Why can’t I sign up?

A6: Make sure the correct country was selected during registration and your smart-

phone can receive SMS text messages.

Q7: Why can’t I log in my camera?

A7: First, ensure your smartphone has a wireless or data connection and can

access the Internet.

Second, your password is case-sensitive and must be at least 3 characters long.

Third, if the suggestions above do not work, tap “Forgot Password” to reset your

password. You will be asked to enter the phone number used to login. An SMS text

message will be sent to the action code and your new password. Use your newly

created password for future logins.

Q8: How to turn on the IR LEDs?

A8: If the illumination around the camera is below 10lux, the IR LEDs will be turned

on automatically.

I. Product Overview

1. IR LEDs

2. Speaker

3. Camera Lens

4. Screw Port

II. What’s in the Box

-1× WIFI Toy Robot Camera

-1× DC5V Power Adapter

-1× Wall Bracket Mount

-1× 8GB Micro SD Card (fitted into the Micro SD card slot already)

III. Getting Started

3.1. Plug the DC5V power adapter into the camera, then into an outlet AC power

supply. Wait 15 seconds and the robot camera will say “Ready for configuration”.

If the voice prompt fails, then you need to reset the camera (See VIII).

3.2. “Yoosee” APP Installation

3.2.1. Scan the QR code below to install the “Yoosee” application on your Android

or IOS device.

3.2.2. Use your e-mail address or phone number to sign up for “Yoosee” APP. Make

sure your phone receives SMS text message in order to receive the verification code

during account creation.

IV. Network Configuration

4.1. Method One: Direct Connection

Step 1: Connect the camera directly to your router with a RJ45 Ethernet cable.

Step 2: Make sure that your phone or tablet PC is connected to a stable WIFI net-

work or you can use your mobile network data.

Step 3: Launch the “Yoosee” APP and log in your account.

Step 4: Tap “+” > Tap “Add online device” > Input the camera’s UID (at the bottom

of the robot) and name the camera as you like > Type the default password “123” >

Tap “Save”.

Step 5: The camera will be added successfully if you see it shows online on the

“Device” page. Now you can see live video stream.

4.2. Method Two: Smart Link

Step 1: Make sure that your camera is connected to your WIFI network.

Step 2: Tap “+” > Tap “Smart link” > Input the password of your WIFI network > Tap

“Next”.

Step 3: Tap “Hear a beep for connection” and then click “Next”. It will take 30 sec-

onds to 1 minute to complete the connection.

Step 4: Input the camera UID and default password “123” (at the bottom of the

camera), then tap “Save” to add the camera. The camera will be added successfully

if you see it shows online on the “Device” page. Now you can see live video stream.

[Note]: Check the full-screen live video page below. You can control the camera

within the APP by swiping in the direction you want the camera to move. The camera

is capable of panning 350 degree and you can also tilt the camera lens up and down

45 degrees.

V. Motion Detection Video Recording

>> Make sure that the camera is online on the device list page.

5.1. Launch the “Yoosee” APP.

5.2. How to enable motion detection alert.

Step 1: Tap to lock the screen and will show up > tap the gear icon <

select “Alarm settings”.

Step 2: Enable “Receive alarm prompt”, choose a duration time of siren and turn

on “Motion detection” function.

5.3. How to set up video recording based on motion detection.

Step 1: Go back to “Settings” page and select “Picture and sound”.

Step 2: Choose a proper video format according to your country.

Step 3: Return to the previous page and then tap “Record settings” page.

Step 4: Select “Record alarm” recording mode and then choose your desired video

length from 1, 2 and 3 minutes.

5.4. When motion is detected, the camera siren will sound for a preset time, the

camera will record a video automatically to the Micro SD card on the robot camera

and you will be prompted to respond to the notification page below.

5.5. Return to “Device” page and tap play back icon to play back the video files

right on your phone.

5.6. Or, you can power off the camera and remove the Micro SD card. Insert the

Micro SD card into a card reader and then plug it into your PC computer. All video

files can be accessed in the “npc” folder. You need to use GPlayer to play back

these video files on your PC computer.

[Note]: Video Resolution: 1280×960 Video Format: AV

VI. Scheduled Video Recording

6.1. Run the “Yoosee” APP.

6.2. How to set up continuous video recording.

Step 1: Tap the gear icon on the “Device” page, and select “Picture and sound”.

Step 2: Choose a proper video format according to your country.

Step 3: Return to the previous page, tap “Record settings” and then choose

“Record timer” recording mode and make your own schedule of video recording.

Step 4: A video clip will be generated and saved in the Micro SD card every 30 min-

utes automatically. Follow 4.5 to check out the video files.

VII. Resetting to Factory Default Settings

If for any reason the robot camera stops working or isn’t working properly, you can

reset the camera to restore it back to normal operation.

Operation: When the camera is powered on, use a pin to press and hold the Reset

Button for 10 seconds to reset all settings to factory default. The camera will say

“reset to default settings” and restart automatically with default settings in 10 sec-

onds.

VIII. Changing Administrator & Visitor Password

8.1. Launch the application.

8.2. Tap the gear icon and go to “Security settings” page.

8.3. Choose “Admin password”. On the next page, input the default password

“123”, then enter your new password which must contain 6-30 characters of letters

and digits. Finally, tap “Save” to confirm the change.

8.4. Go back to “Security settings” page and select “Visitor password”. Input a

password then tap “Save” to confirm the visitor password setting.

IX. Share Your Robot Camera with Family Members

9.1. Make sure your family members download the “Yoosee” APP from their App

store or Google play. (See 3.2)

9.2. They need to sign up for a “Yoosee” account using their own phone number or

email address and follow 4.1 to add the camera.

9.3. If you set a visitor password, you need to tell them about the visitor password.

Otherwise, they cannot access the camera on the APP. Visitors have no access to

system settings.

Frequently Asked Questions

Q1: What media player software should I use to play back the video files on my

PC computer?

A1: You could use the robot’s PC client software or GPlayer to play back the video

files on your PC computer. Here is the download link:

http://www.wiseupshop.com/download?name=wifi27&Submit=++++++++

Q2: How do I reset my camera back to the way I got it?

A2: Reset the camera to factory default. (See VI)

Q3: How many visitors are supported to check live video?

A3: 5

Q4: Why the live video smooth and clear is not smooth and clear enough?

A4: You can choose HD video quality on the live video screen according to your

actual network speed.

Q5: Where can I adjust the buzzer volume?

A5: Click the gear icon on the “Device setting” page and then go to “Picture and

sound” page to adjust the volume.

Q6: Why can’t I sign up?

A6: Make sure the correct country was selected during registration and your smart-

phone can receive SMS text messages.

Q7: Why can’t I log in my camera?

A7: First, ensure your smartphone has a wireless or data connection and can

access the Internet.

Second, your password is case-sensitive and must be at least 3 characters long.

Third, if the suggestions above do not work, tap “Forgot Password” to reset your

password. You will be asked to enter the phone number used to login. An SMS text

message will be sent to the action code and your new password. Use your newly

created password for future logins.

Q8: How to turn on the IR LEDs?

A8: If the illumination around the camera is below 10lux, the IR LEDs will be turned

on automatically.

I. Product Overview

1. IR LEDs

2. Speaker

3. Camera Lens

4. Screw Port

II. What’s in the Box

-1× WIFI Toy Robot Camera

-1× DC5V Power Adapter

-1× Wall Bracket Mount

-1× 8GB Micro SD Card (fitted into the Micro SD card slot already)

III. Getting Started

3.1. Plug the DC5V power adapter into the camera, then into an outlet AC power

supply. Wait 15 seconds and the robot camera will say “Ready for configuration”.

If the voice prompt fails, then you need to reset the camera (See VIII).

3.2. “Yoosee” APP Installation

3.2.1. Scan the QR code below to install the “Yoosee” application on your Android

or IOS device.

3.2.2. Use your e-mail address or phone number to sign up for “Yoosee” APP. Make

sure your phone receives SMS text message in order to receive the verification code

during account creation.

IV. Network Configuration

4.1. Method One: Direct Connection

Step 1: Connect the camera directly to your router with a RJ45 Ethernet cable.

Step 2: Make sure that your phone or tablet PC is connected to a stable WIFI net-

work or you can use your mobile network data.

Step 3: Launch the “Yoosee” APP and log in your account.

Step 4: Tap “+” > Tap “Add online device” > Input the camera’s UID (at the bottom

of the robot) and name the camera as you like > Type the default password “123” >

Tap “Save”.

Step 5: The camera will be added successfully if you see it shows online on the

“Device” page. Now you can see live video stream.

4.2. Method Two: Smart Link

Step 1: Make sure that your camera is connected to your WIFI network.

Step 2: Tap “+” > Tap “Smart link” > Input the password of your WIFI network > Tap

“Next”.

Step 3: Tap “Hear a beep for connection” and then click “Next”. It will take 30 sec-

onds to 1 minute to complete the connection.

Step 4: Input the camera UID and default password “123” (at the bottom of the

camera), then tap “Save” to add the camera. The camera will be added successfully

if you see it shows online on the “Device” page. Now you can see live video stream.

[Note]: Check the full-screen live video page below. You can control the camera

within the APP by swiping in the direction you want the camera to move. The camera

is capable of panning 350 degree and you can also tilt the camera lens up and down

45 degrees.

V. Motion Detection Video Recording

>> Make sure that the camera is online on the device list page.

5.1. Launch the “Yoosee” APP.

5.2. How to enable motion detection alert.

Step 1: Tap to lock the screen and will show up > tap the gear icon <

select “Alarm settings”.

Step 2: Enable “Receive alarm prompt”, choose a duration time of siren and turn

on “Motion detection” function.

5.3. How to set up video recording based on motion detection.

Step 1: Go back to “Settings” page and select “Picture and sound”.

Step 2: Choose a proper video format according to your country.

Step 3: Return to the previous page and then tap “Record settings” page.

Step 4: Select “Record alarm” recording mode and then choose your desired video

length from 1, 2 and 3 minutes.

5.4. When motion is detected, the camera siren will sound for a preset time, the

camera will record a video automatically to the Micro SD card on the robot camera

and you will be prompted to respond to the notification page below.

5.5. Return to “Device” page and tap play back icon to play back the video files

right on your phone.

5.6. Or, you can power off the camera and remove the Micro SD card. Insert the

Micro SD card into a card reader and then plug it into your PC computer. All video

files can be accessed in the “npc” folder. You need to use GPlayer to play back

these video files on your PC computer.

[Note]: Video Resolution: 1280×960 Video Format: AV

VI. Scheduled Video Recording

6.1. Run the “Yoosee” APP.

6.2. How to set up continuous video recording.

Step 1: Tap the gear icon on the “Device” page, and select “Picture and sound”.

Step 2: Choose a proper video format according to your country.

Step 3: Return to the previous page, tap “Record settings” and then choose

“Record timer” recording mode and make your own schedule of video recording.

Step 4: A video clip will be generated and saved in the Micro SD card every 30 min-

utes automatically. Follow 4.5 to check out the video files.

VII. Resetting to Factory Default Settings

If for any reason the robot camera stops working or isn’t working properly, you can

reset the camera to restore it back to normal operation.

Operation: When the camera is powered on, use a pin to press and hold the Reset

Button for 10 seconds to reset all settings to factory default. The camera will say

“reset to default settings” and restart automatically with default settings in 10 sec-

onds.

VIII. Changing Administrator & Visitor Password

8.1. Launch the application.

8.2. Tap the gear icon and go to “Security settings” page.

8.3. Choose “Admin password”. On the next page, input the default password

“123”, then enter your new password which must contain 6-30 characters of letters

and digits. Finally, tap “Save” to confirm the change.

8.4. Go back to “Security settings” page and select “Visitor password”. Input a

password then tap “Save” to confirm the visitor password setting.

IX. Share Your Robot Camera with Family Members

9.1. Make sure your family members download the “Yoosee” APP from their App

store or Google play. (See 3.2)

9.2. They need to sign up for a “Yoosee” account using their own phone number or

email address and follow 4.1 to add the camera.

9.3. If you set a visitor password, you need to tell them about the visitor password.

Otherwise, they cannot access the camera on the APP. Visitors have no access to

system settings.

Frequently Asked Questions

Q1: What media player software should I use to play back the video files on my

PC computer?

A1: You could use the robot’s PC client software or GPlayer to play back the video

files on your PC computer. Here is the download link:

http://www.wiseupshop.com/download?name=wifi27&Submit=++++++++

Q2: How do I reset my camera back to the way I got it?

A2: Reset the camera to factory default. (See VI)

Q3: How many visitors are supported to check live video?

A3: 5

Q4: Why the live video smooth and clear is not smooth and clear enough?

A4: You can choose HD video quality on the live video screen according to your

actual network speed.

Q5: Where can I adjust the buzzer volume?

A5: Click the gear icon on the “Device setting” page and then go to “Picture and

sound” page to adjust the volume.

Q6: Why can’t I sign up?

A6: Make sure the correct country was selected during registration and your smart-

phone can receive SMS text messages.

Q7: Why can’t I log in my camera?

A7: First, ensure your smartphone has a wireless or data connection and can

access the Internet.

Second, your password is case-sensitive and must be at least 3 characters long.

Third, if the suggestions above do not work, tap “Forgot Password” to reset your

password. You will be asked to enter the phone number used to login. An SMS text

message will be sent to the action code and your new password. Use your newly

created password for future logins.

Q8: How to turn on the IR LEDs?

A8: If the illumination around the camera is below 10lux, the IR LEDs will be turned

on automatically.

I. Product Overview

1. IR LEDs

2. Speaker

3. Camera Lens

4. Screw Port

II. What’s in the Box

-1× WIFI Toy Robot Camera

-1× DC5V Power Adapter

-1× Wall Bracket Mount

-1× 8GB Micro SD Card (fitted into the Micro SD card slot already)

III. Getting Started

3.1. Plug the DC5V power adapter into the camera, then into an outlet AC power

supply. Wait 15 seconds and the robot camera will say “Ready for configuration”.

If the voice prompt fails, then you need to reset the camera (See VIII).

3.2. “Yoosee” APP Installation

3.2.1. Scan the QR code below to install the “Yoosee” application on your Android

or IOS device.

3.2.2. Use your e-mail address or phone number to sign up for “Yoosee” APP. Make

sure your phone receives SMS text message in order to receive the verification code

during account creation.

IV. Network Configuration

4.1. Method One: Direct Connection

Step 1: Connect the camera directly to your router with a RJ45 Ethernet cable.

Step 2: Make sure that your phone or tablet PC is connected to a stable WIFI net-

work or you can use your mobile network data.

Step 3: Launch the “Yoosee” APP and log in your account.

Step 4: Tap “+” > Tap “Add online device” > Input the camera’s UID (at the bottom

of the robot) and name the camera as you like > Type the default password “123” >

Tap “Save”.

Step 5: The camera will be added successfully if you see it shows online on the

“Device” page. Now you can see live video stream.

4.2. Method Two: Smart Link

Step 1: Make sure that your camera is connected to your WIFI network.

Step 2: Tap “+” > Tap “Smart link” > Input the password of your WIFI network > Tap

“Next”.

Step 3: Tap “Hear a beep for connection” and then click “Next”. It will take 30 sec-

onds to 1 minute to complete the connection.

Step 4: Input the camera UID and default password “123” (at the bottom of the

camera), then tap “Save” to add the camera. The camera will be added successfully

if you see it shows online on the “Device” page. Now you can see live video stream.

[Note]: Check the full-screen live video page below. You can control the camera

within the APP by swiping in the direction you want the camera to move. The camera

is capable of panning 350 degree and you can also tilt the camera lens up and down

45 degrees.

V. Motion Detection Video Recording

>> Make sure that the camera is online on the device list page.

5.1. Launch the “Yoosee” APP.

5.2. How to enable motion detection alert.

Step 1: Tap to lock the screen and will show up > tap the gear icon <

select “Alarm settings”.

Step 2: Enable “Receive alarm prompt”, choose a duration time of siren and turn

on “Motion detection” function.

5.3. How to set up video recording based on motion detection.

Step 1: Go back to “Settings” page and select “Picture and sound”.

Step 2: Choose a proper video format according to your country.

Step 3: Return to the previous page and then tap “Record settings” page.

Step 4: Select “Record alarm” recording mode and then choose your desired video

length from 1, 2 and 3 minutes.

5.4. When motion is detected, the camera siren will sound for a preset time, the

camera will record a video automatically to the Micro SD card on the robot camera

and you will be prompted to respond to the notification page below.

5.5. Return to “Device” page and tap play back icon to play back the video files

right on your phone.

5.6. Or, you can power off the camera and remove the Micro SD card. Insert the

Micro SD card into a card reader and then plug it into your PC computer. All video

files can be accessed in the “npc” folder. You need to use GPlayer to play back

these video files on your PC computer.

[Note]: Video Resolution: 1280×960 Video Format: AV

VI. Scheduled Video Recording

6.1. Run the “Yoosee” APP.

6.2. How to set up continuous video recording.

Step 1: Tap the gear icon on the “Device” page, and select “Picture and sound”.

Step 2: Choose a proper video format according to your country.

Step 3: Return to the previous page, tap “Record settings” and then choose

“Record timer” recording mode and make your own schedule of video recording.

Step 4: A video clip will be generated and saved in the Micro SD card every 30 min-

utes automatically. Follow 4.5 to check out the video files.

VII. Resetting to Factory Default Settings

If for any reason the robot camera stops working or isn’t working properly, you can

reset the camera to restore it back to normal operation.

Operation: When the camera is powered on, use a pin to press and hold the Reset

Button for 10 seconds to reset all settings to factory default. The camera will say

“reset to default settings” and restart automatically with default settings in 10 sec-

onds.

VIII. Changing Administrator & Visitor Password

8.1. Launch the application.

8.2. Tap the gear icon and go to “Security settings” page.

8.3. Choose “Admin password”. On the next page, input the default password

“123”, then enter your new password which must contain 6-30 characters of letters

and digits. Finally, tap “Save” to confirm the change.

8.4. Go back to “Security settings” page and select “Visitor password”. Input a

password then tap “Save” to confirm the visitor password setting.

IX. Share Your Robot Camera with Family Members

9.1. Make sure your family members download the “Yoosee” APP from their App

store or Google play. (See 3.2)

9.2. They need to sign up for a “Yoosee” account using their own phone number or

email address and follow 4.1 to add the camera.

9.3. If you set a visitor password, you need to tell them about the visitor password.

Otherwise, they cannot access the camera on the APP. Visitors have no access to

system settings.

Frequently Asked Questions

Q1: What media player software should I use to play back the video files on my

PC computer?

A1: You could use the robot’s PC client software or GPlayer to play back the video

files on your PC computer. Here is the download link:

http://www.wiseupshop.com/download?name=wifi27&Submit=++++++++

Q2: How do I reset my camera back to the way I got it?

A2: Reset the camera to factory default. (See VI)

Q3: How many visitors are supported to check live video?

A3: 5

Q4: Why the live video smooth and clear is not smooth and clear enough?

A4: You can choose HD video quality on the live video screen according to your

actual network speed.

Q5: Where can I adjust the buzzer volume?

A5: Click the gear icon on the “Device setting” page and then go to “Picture and

sound” page to adjust the volume.

Q6: Why can’t I sign up?

A6: Make sure the correct country was selected during registration and your smart-

phone can receive SMS text messages.

Q7: Why can’t I log in my camera?

A7: First, ensure your smartphone has a wireless or data connection and can

access the Internet.

Second, your password is case-sensitive and must be at least 3 characters long.

Third, if the suggestions above do not work, tap “Forgot Password” to reset your

password. You will be asked to enter the phone number used to login. An SMS text

message will be sent to the action code and your new password. Use your newly

created password for future logins.

Q8: How to turn on the IR LEDs?

A8: If the illumination around the camera is below 10lux, the IR LEDs will be turned

on automatically.

WIFI27

Benutzerhandbuch

I. Produktübersicht

1. IR LEDs

2. Lautsprecher

3. Kameraobjektiv

4. Schraubanschluss

II. Was ist in der Box

-1 × WIFI Spielzeug-Roboter-Kamera

-1 × DC5V Netzteil

-1 × Wandhalterung

-1 × 8GB Micro SD Card (bereits in den Micro SD Kartensteckplatz eingebaut)

III. Anfangen

3.1. Stecken Sie den DC5V Netzadapter in die Kamera und stecken Sie ihn in eine

Steckdose. Warten Sie 15 Sekunden und die Roboterkamera sagt "Bereit zur Kon-

figuration". Wenn die Sprachaufforderung fehlschlägt, müssen Sie die Kamera

zurücksetzen (siehe VIII).

3.2 "Yoosee" APP Installation

3.2.1. Scannen Sie den QR-Code unten, um die "Yoosee" -Anwendung auf Ihrem

Android- oder IOS-Gerät zu installieren.

3.2.2. Benutzen Sie Ihre E-Mail-Adresse oder Telefonnummer, um sich für "Yoosee"

APP anzumelden. Vergewissern Sie sich, dass Ihr Telefon SMS-Textnachricht emp-

fängt, um den Bestätigungscode bei der Kontoerstellung zu erhalten.

IV. Netzwerkkonfiguration

4.1. Methode 1: Direktverbindung

Schritt 1: Schließen Sie die Kamera direkt an Ihren Router mit einem RJ45 Ether-

net-Kabel an.

Step 2: Make sure that your phone or tablet PC is connected to a stable WIFI net-

work or you can use your mobile network data.

Schritt 2: Stellen Sie sicher, dass Ihr Telefon oder Tablet PC mit einem stabilen WIFI

Netzwerk verbunden ist oder Sie können Ihre Mobilfunkdaten verwenden.

Schritt 3: Starten Sie die "Yoosee" APP und melden Sie sich bei Ihrem Konto an.

Schritt 4: Tippen Sie auf "+"> Tippen Sie auf "Online-Gerät hinzufügen"> Geben

Sie die UID der Kamera (unten im Roboter) ein und benennen Sie die Kamera wie

folgt> Geben Sie das Standardpasswort ein "123"> Tippen Sie auf "Speichern".

Schritt 5: Die Kamera wird erfolgreich hinzugefügt, wenn man sie auf der Seite

"Gerät" online anzeigt. Jetzt können Sie Live-Video-Stream sehen.

4.2. Methode 2: Smart Link

Schritt 1: Stellen Sie sicher, dass Ihre Kamera an Ihr WIFI-Netzwerk angeschlossen ist.

Schritt 2: Tippen Sie auf "+"> Tippen Sie auf "Smart Link"> Geben Sie das Passwort

Ihres WIFI Netzwerks ein> Tippen Sie auf "Weiter".

Schritt 3: Tippen Sie auf "Hören Sie einen Signalton für Verbindung" und klicken

Sie dann auf "Weiter". Es dauert 30 Sekunden bis 1 Minute, um die Verbindung zu

vervollständigen.

Schritt 4: Eingabe der Kamera UID und Standard-Passwort "123" (am unteren Rand

der Kamera), dann tippen Sie auf "Speichern", um die Kamera hinzuzufügen. Die

Kamera wird erfolgreich hinzugefügt, wenn man sie auf der Seite "Gerät" online an-

zeigt. Jetzt können Sie Live-Video-Stream sehen.

[Hinweis]: Überprüfen Sie die Vollbild-Live-Videoseite unten. Sie können die

Kamera innerhalb der APP durch Swiping in die Richtung, die Sie die Kamera bewe-

gen wollen, steuern. Die Kamera ist in der Lage, 350 Grad zu schwenken und Sie

können auch das Kameraobjektiv nach oben und unten um 45 Grad kippen.

V. Bewegungserkennung Videoaufnahme

>> Make sure that the camera is online on the device list page.

>> Vergewissern Sie sich, dass die Kamera auf der Gerätelistenseite online ist.

5.1. Starten Sie die "Yoosee" APP.

5.2. So aktivieren Sie die Bewegungserkennung.

Schritt 1: Tippen Sie auf , um den Bildschirm zu sperren und wird angezeigt >

Tippen Sie auf das Zahnradsymbol < wählen Sie "Alarmeinstellungen".

Schritt 2: Aktivieren Sie "Empfangsalarm", wählen Sie eine Dauer der Sirene und

schalten Sie die Funktion "Bewegungserkennung" ein.

5.3 So richten Sie die Videoaufnahme auf der Grundlage der Bewegungserkennung

ein.

Schritt 1: Gehe zurück zur Seite "Einstellungen" und wähle "Bild und Ton".

Schritt 2: Wählen Sie ein passendes Videoformat nach Ihrem Land.

Schritt 3: Kehren Sie zur vorherigen Seite zurück und tippen Sie dann auf "Einstel-

lungen speichern".

Schritt 4: Wählen Sie den Aufnahmemodus "Aufzeichnungsalarm" und wählen Sie

die gewünschte Videolänge von 1, 2 und 3 Minuten aus.

5.4 Wenn die Bewegung erkannt wird, ertönt die Kamera-Sirene für eine vorein-

gestellte Zeit, die Kamera wird automatisch ein Video auf die Micro SD-Karte auf der

Roboter-Kamera aufnehmen und Sie werden aufgefordert, auf die unten stehende

Meldung zu antworten.

5.5 Kehren Sie zur Seite "Gerät" zurück und tippen Sie auf das Wiedergabesym-

bol, um die Videodateien direkt auf Ihrem Telefon wiederzugeben.

5.6 Oder du kannst die Kamera ausschalten und die Micro SD Karte entfernen.

Setzen Sie die Micro SD-Karte in einen Kartenleser ein und stecken Sie sie dann in

Ihren PC-Computer ein. Auf alle Videodateien kann im Ordner "npc" zugegriffen

werden. Sie müssen GPlayer verwenden, um diese Videodateien auf Ihrem

PC-Computer wiederzugeben.

[Anmerkung]: Videoauflösung: 1280 × 960 Video Format: AV

VI. Geplante Videoaufnahme

6.1. Führen Sie die "Yoosee" APP.

6.2. So richten Sie eine kontinuierliche Videoaufnahme ein.

Schritt 1: Tippen Sie auf das Getriebe-Symbol auf der Seite "Gerät" und wählen

Sie "Bild und Ton".

Schritt 2: Wählen Sie ein passendes Videoformat nach Ihrem Land.

Schritt 3: Kehren Sie zur vorherigen Seite zurück, tippen Sie auf "Aufnahmeeinstel-

lungen" und wählen Sie dann den Aufnahmemodus "Timer aufnehmen" und

machen Sie Ihren eigenen Zeitplan für die Videoaufnahme.

Schritt 4: Ein Video-Clip wird generiert und in der Micro SD-Karte alle 30 Minuten au-

tomatisch gespeichert. Folgen Sie 4.5, um die Videodateien auszuprobieren.

VII. Zurücksetzen auf Werkseinstellungen

Wenn aus irgendeinem Grund die Roboter-Kamera aufhört zu arbeiten oder nicht

richtig funktioniert, können Sie die Kamera zurücksetzen, um sie wieder in den nor-

malen Betrieb zurückzusetzen.

Bedienung: Wenn die Kamera eingeschaltet ist, verwenden Sie einen Pin, um die

Reset-Taste für 10 Sekunden zu drücken, um alle Einstellungen auf die Werksein-

stellungen zurückzusetzen. Die Kamera sagt "Rücksetzen auf Standardeinstellun-

gen" und startet automatisch mit den Standardeinstellungen in 10 Sekunden neu.

VIII. Ändern Administrator & Besucher Passwort

8.1. Starten Sie die Anwendung.

8.2 Tippen Sie auf das Zahnradsymbol und gehen Sie auf die Seite "Sicherheit-

seinstellungen".

8.3 Wählen Sie "Admin-Passwort". Geben Sie auf der nächsten Seite das Stan-

dardpasswort "123" ein und geben Sie dann Ihr neues Passwort ein, das 6-30 Ze-

ichen Buchstaben und Ziffern enthalten muss. Schließlich tippen Sie auf "Spe-

ichern", um die Änderung zu bestätigen.

5. RJ45 Ethernet Port

6. Reset-Taste

7. Leistungsaufnahme

8. Mikro-Sd-Einbauschlitz

8.4 Gehen Sie zurück zur Seite "Sicherheitseinstellungen" und wählen Sie "Be-

sucherpasswort". Geben Sie ein Passwort ein und tippen Sie auf "Speichern", um

die Einstellung des Besuchers zu bestätigen.

IX. Teilen Sie Ihre Roboter-Kamera mit Familienmitgliedern

9.1. Stellen Sie sicher, dass Ihre Familienmitglieder die "Yoosee" APP aus ihrem

App Store oder Google Play herunterladen. (Siehe 3.2)

9.2. Sie müssen sich für ein "Yoosee" -Konto mit ihrer eigenen Telefonnummer oder

E-Mail-Adresse anmelden und folgen 4.1, um die Kamera hinzuzufügen.

9.3 Wenn Sie ein Besucherpasswort setzen, müssen Sie ihnen das Besucherpass-

wort mitteilen. Andernfalls können sie nicht auf die Kamera auf der APP zugreifen.

Besucher haben keinen Zugriff auf Systemeinstellungen.

Häufig gestellte Fragen

Q1: Welche Media Player Software soll ich verwenden, um die Videodateien

auf meinem PC zu spielen?

A1: Sie können die PC-Client-Software oder den GPlayer des Roboters verwenden,

um die Videodateien auf Ihrem PC-Computer wiederzugeben. Hier ist der Down-

load-Link:

http://www.wiseupshop.com/download?name=wifi27&Submit=++++++++

Q2: Wie kann ich meine Kamera zurücksetzen, so wie ich es bekommen habe?

A2: Setzen Sie die Kamera auf die Werkseinstellungen zurück. (Siehe VI)

Q3: Wie viele Besucher werden unterstützt, um Live-Video zu überprüfen?

A3: 5

Q4: Warum das Live-Video glatt und klar ist nicht glatt und klar genug?

A4: Sie können die HD-Videoqualität auf dem Live-Videobildschirm entsprechend

Ihrer aktuellen Netzwerkgeschwindigkeit auswählen.

Q5: Wo kann ich die Summerlautstärke einstellen?

A5: Klicken Sie auf das Getriebe-Symbol auf der Seite "Geräteeinstellung" und

gehen Sie dann auf "Bild und Ton", um die Lautstärke einzustellen.

Q6: Warum kann ich mich nicht anmelden?

A6: Stellen Sie sicher, dass das richtige Land während der Registrierung aus-

gewählt wurde und Ihr Smartphone SMS-Nachrichten empfangen kann.

Q7: Warum kann ich meine Kamera nicht einloggen?

A7: Erstens, stellen Sie sicher, dass Ihr Smartphone eine drahtlose oder Daten-

verbindung hat und auf das Internet zugreifen kann.

Zweitens ist Ihr Passwort zwischen Groß- und Kleinschreibung unterschieden und

muss mindestens 3 Zeichen lang sein. Drittens, wenn die obigen Vorschläge nicht

funktionieren, tippen Sie auf "Passwort vergessen", um Ihr Passwort zurückzuset-

zen. Sie werden aufgefordert, die für die Anmeldung verwendete Telefonnummer

einzugeben. Eine SMS-Nachricht wird an den Aktionscode und Ihr neues Passwort

gesendet. Verwenden Sie Ihr neu erstelltes Passwort für zukünftige Anmeldungen.

Q8: Wie schalte ich die IR-LEDs ein?

A8: Wenn die Beleuchtung um die Kamera unter 10lux liegt, werden die IR-LEDs au-

tomatisch eingeschaltet.