WiT BLE 5.0 User manual
BLE 5.0 Adapter | manual v0722 | http://wiki.wit-motion.com/english
- 2 -
Tutorial link
Google Drive
Github
Notice:
BLE 5.0 adapter is an accessory only designed for WitMotion Bluetooth 5.0
sensor’s connection with PC, including WT901BLE, WT901BLECL.
Its usage will be based on the sensor’s operation. For more details, there will be a
Chapter BLE 5.0 Adapter connection shown in the manual of the corresponding
model you bought.
If you have technical problems or cannot find the information that you need in the
provided documents, please contact our support team. Our engineering team is
committed to providing the required support necessary to ensure that you are
successful with the operation of our AHRS sensors.
Contact
Technical Support Contact Info
BLE 5.0 Adapter | manual v0722 | http://wiki.wit-motion.com/english
- 3 -
Contents
Tutorial link............................................................................... - 2 -
Contact....................................................................................... - 2 -
Contents.....................................................................................- 3 -
1 Description............................................................................ - 4 -
2 Specification......................................................................... - 5 -
2.1 Parameter.....................................................................- 5 -
2.2 Size................................................................................. - 6 -
3 Using Method....................................................................... - 7 -
3.1 Driver Installation..................................................... - 7 -
3.2 Check Port Number.................................................. - 9 -
BLE 5.0 Adapter | manual v0722 | http://wiki.wit-motion.com/english
- 4 -
1 Description
BLE 5.0 adapter is an accessory only designed for WITMOTION WT901BLECL
BLE 5.0 sensor’s connection with PC
●Built-in CP2102 chip
●Anti-dust, cap-design
●USB specification 2.0
●Support the wireless distance up to 30m
●Compatible with 3.3V/5V voltage input
●Small size, high stability, low-consumption, easy to carry
●SUPERIOR COMPATIBILITY: compatible with Windows XP/7/8/10 32bits/
64bits, Linux, Wince, Mac, Vista, etc.
BLE 5.0 Adapter | manual v0722 | http://wiki.wit-motion.com/english
- 7 -
3 Using Method
3.1 Driver Installation
For 32 bit system, please install CP210xVCPInstaller_x86.exe
For 64 bit system, please install CP210xVCPInstaller_x64.exe
Link to CP2102 Driver
Step 1.
Download the driver from below link
Silicon Usb-to-uart-bridge-vcp-drivers
Step 2.
Unzip the file and run the installer depending to your computer type
BLE 5.0 Adapter | manual v0722 | http://wiki.wit-motion.com/english
- 10 -
Change port number
Sometimes we insert multiple USB serial module into our computer,and
sometimes we want serial numbers to be allocated according to our
expectations, so we need to manually adjust the serial number, if the above
serial port 3 is changed to serial port 4, the operation steps are as follows:
Step 1: Open device manager, right-click on CP102 USB to UART Bridge
Controller and select “Properties”.
Table of contents
