WIWACAM MW8 User manual

MW8 Mini Camera
Quick Guide
English
Before using the camera for the first time, please read the
‘Important Notes’ and ‘Setup Camera’ in this quick guide.
VIDEO TUTORIAL: wiwacam.com/mw8-s-en
ONLINE PDF: wiwacam.com/mw8-pdf-en
VER:08-EN-2308

- 2 -wiwacam.com/support
Warranty
If you encounter any problems with the product or need
to request a replacement or refund, please send us an
email (see below). We will respond within 24 hours, and
in most cases, within a few hours.
…………………………………………………………………………………………
Service email:
[email protected]
Support Web Site:
wiwacam.com/support
Before using the camera for the first time, please
read the ‘Important Notes’.
Important notes:
1. If the seal labels on the box are torn, missing, or damaged before you
open it, please contact us for a new camera, email: [email protected].
2. Before using the camera, please perform the Setup Camera as described

- 3 -wiwacam.com/support
in Chapter 2 of this manual.
3. WiFi performance of each camera has been tested before delivery. However,
the WiFi antenna may get impacted during shipping. If you have any weak
WiFi performance problem on the camera you receive, please contact us for
a replacement.
4. The MW8 camera uses external surfaces for heat dissipation. You may
notice that the camera surface is warm during camera operation, this is
normal.
5. The MW8 camera has equipped a Camera Lens Cover in front of the
camera lens to conceal the camera. We have used WIWACAM Ultra Hidden
Glass for this purpose. However, this can still have a slight impact on the
image quality, which is considered normal. All the similar models available
in the market experience a similar impact.
6. Please be aware that the Camera Lens Cover glass is fragile and can
easily break if it falls to the ground.
7. To achieve better image quality and better night vision, please place the
MW8 camera closer to the edge of the table. If it is positioned too far away
from the table edge, a significant portion of the image may be occupied by
the table itself. We recommend keeping a distance of LESS than 6 inches
from the camera to the table edge for optimal results.
8. In night vision mode, be careful not to have objects too close to the lens.
Objects closed to lens will block the infrared rays or reflect the infrared
rays to the lens. The blocking or reflection will severely degrade night vision
image quality.
9. The MW8 prevents rapid switching back and forth between day mode
and night mode. If the camera switches modes several times within 1
minute, it will stay in night mode for 30 minutes. Afterward, it resumes
attempting to detect the lighting conditions automatically. If you see the
camera still in night mode when the room is well-lit, simply wait a few
minutes for it to switch back to auto light detection mode.

- 4 -wiwacam.com/support
Table of Contents
Important notes: ............................................................................................................................................................... - 2 -
1. Product Brief.................................................................................................................................................................. - 5 -
2. Setup Camera and Connect to WiFi ...................................................................................................................... - 6 -
2.1 Preparation.............................................................................................................................................................. - 6 -
2.2 Detach the Camera Lens Cover........................................................................................................................ - 7 -
2.2 Turn on Camera..................................................................................................................................................... - 7 -
2.3 WIWACAM app ..................................................................................................................................................... - 8 -
2.4 Setup Camera......................................................................................................................................................... - 8 -
2.5 The Second Setup Method..............................................................................................................................- 12 -
2.6 (Optional)Turn Off Status LED ........................................................................................................................- 12 -
3. Mobile Power Bank, Recharge and Battery.......................................................................................................- 13 -
3.1 Mobile Power Bank ............................................................................................................................................- 13 -
3.2 Camera works by the battery..........................................................................................................................- 13 -
3.3 Turn Off Camera.................................................................................................................................................. - 14 -
4. Install microSD card ..................................................................................................................................................- 14 -
5. Reset Camera .............................................................................................................................................................. - 15 -
6. How to Ensure Good Quality Night Vision........................................................................................................- 16 -
7. Feature Guides............................................................................................................................................................- 19 -
7.1 Add camera on more smartphones.............................................................................................................. - 19 -
7.2 Check Live Video................................................................................................................................................. - 21 -
7.3 Set Continuous Recording ...............................................................................................................................- 22 -
7.4 Set Alarm Recording..........................................................................................................................................- 24 -
7.5 Playback microSD card Recordings .............................................................................................................. - 25 -
7.6 Set Alarm and Alarm Notification.................................................................................................................. - 26 -
7.7 Check Alarm List.................................................................................................................................................. - 29 -
7.8 Notes about Playback Recordings on PC/MAC........................................................................................- 29 -
7.9 Use Camera with No WiFi ................................................................................................................................ - 29 -
8 Online FAQ and Resources......................................................................................................................................- 29 -
9 Error diagnostics..........................................................................................................................................................- 30 -

- 5 -wiwacam.com/support
Note
There is a online PDF quick guide available:
https://wiwacam.com/mw8-pdf-en
We update the online PDF regularly to include latest features and tips
If you need the guide of recording without WiFi, check this link,
https://wiwacam.com/no-wifi-en
1. Product Brief
Note: the device has a Camera Lens Cover installed by default when going
out of factory.
(after detach the Camera Lens Cover from the device)

- 6 -wiwacam.com/support
This device could work as both mobile power bank and mini spy camera.
You can charge your smartphone with it, and at the same time, the built-in
WiFi camera can be used to stream live video and record.
2. Setup Camera and Connect to WiFi
2.1 Preparation
Please check the following before using your camera for the first time:
✓ Make sure your router has a 2.4GHz frequency band (most 5GHz routers
also have a 2.4GHz band, so it should work if you have a router with 5GHz
WiFi support)
✓ Connect your smartphone to the target WiFi (the WiFi you want to
connect the camera to)
✓ Keep your smartphone and the camera close to your WiFi router, within
9 feet (3 meters) during the installation process (you can move the camera
further away after installation)
✓ Ensure you have the correct WiFi password for the network

- 7 -wiwacam.com/support
2.2 Detach the Camera Lens Cover
The camera lens cover is held onto the device with a adhesive strip.
Begin by going to the side where the camera lens is located, and gently lift
the cover from the corner edge. If you spot screw on the device, it's a sign
that you're properly opening the cover.
Note: When you detach the lens cover, it's normal if there's some adhesive
strip left on the device.
Caution: the cover is made of glass (Ultra Hidden Glass). Be careful not to
bend or twist the glass, as it might break accidentally. Pay close attention to
ensure no person gets hurt if glass broken.
2.2 Turn on Camera
(after the Camera Lens Cover has been detached)
✓Connect the microUSB input port on the device to a power outlet using the
USB cable that comes with the product. Use a regular USB Power Adapter
(like 5V 1A or 5V 2A).
✓Press and hold the Camera ON/OFF button for about 3 seconds, then
release(see the image below). This will turn on the camera. (this is not press
the Power Bank ON/OFF button)
✓Wait for 30 to 40 seconds, you will see the Status LED will flash in red

- 8 -wiwacam.com/support
and blue, it means the camera is ready for setup.
*If the Status LED does not flash in red and blue, please try resetting the
camera (See Chapter 4)
2.3 WIWACAM app
✓Search for ‘wiwacam’ in the App Store (iPhone) or in Google Play
(Android) to find and install the ‘WIWACAM' app for free.
WIWA CAM App Download in App Store and Google Play
✓Set up a new account in the WIWACAM app by clicking 'New User
Registration'.
(If you already have a WIWACAM app account, just login to the account)
2.4 Setup Camera
The app will guide you to through the configuration process step by step.
video tutorial available: https://wiwacam.com/mw8-s-en
(The camera support two setup methods. Here is the first way. The second
way can be found in Chapter 2.5 ‘The Other Option of Setup Method’. You
can try second way if first way does not work for you)

- 9 -wiwacam.com/support
(make sure your phone is connected to the target
WiFi)
1. Start the WIWACAM app, click the + button
in top right corner to add a new camera.
2. Select ‘MW8' from the menu options. Then
follow the instructions in the app.
3. Confirm the WiFi name shown here in app is the name of the WiFi to
connect to (must be 2.4G WiFi) --> input the WiFi password, click
‘Next’.
Note: if the WiFi name here is not the one you want camera to connect,
go to your phone WiFi settings, connect your phone to the correct WiFi,
then start from the beginning of Chapter 2.4 again.
4. The App will display a QR Code on
phone screen. Keep camera lens about
6 inches (15cm) away from phone, let
the camera lens facing the QR Code on
the phone screen to scan it.

- 10 -wiwacam.com/support
At the same time, keep an eye on the
Status LED on the device, once
camera has scanned successfully, you
will see the Status LED change to
flash in blue, then Click ‘NEXT’
button in the current app page.
(In some cases the app will detect
camera automatically and continue to next step automatically.)
5. The app will display ‘In Progress’ and add the camera, then prompt you
to name the camera and set your own password to the camera. Click
‘Complete’ button.

- 11 -wiwacam.com/support
Now, the camera has been added into the app. You can watch the live video.
Tips:
⚫You can change the camera settings once the camera is added.
⚫You can attach the Camera Lens Cover back to the camera. Note: if you
need to install microSD card to camera, install it first before attaching
Camera Lens Cover. (Check Chapter 4 “Install microSD card” for
details.)
⚫The Status LED could be turned off, but this is optional. Please refer to
‘Chapter 2.6 Turn Off Status LED’ of this quick guide.
Note1: After the camera has been connected to your WiFi, if the camera has
been powered off, you only need to powered it on (there is no need to set it
up again). After powering on, the camera will automatically reconnect to
your WiFi. This process takes around 1 minute.
Note2: As long as your phone has internet (either via WiFi or mobile data),
you can access the camera video via the app, no matter you are at home,
outside or on the go.

- 12 -wiwacam.com/support
2.5 The Second Setup Method
The camera supports two setup methods.
If the setup guide above cannot be completed in your case, please try the
second method. The second way have no code scan operation.
You can find guides and a video tutorial for the 2nd method at the following
link:
https://wiwacam.com/mw8-a-en
2.6 (Optional)Turn Off Status LED
After camera setup, you can turn off the Status LED on the camera (this is
optional):
go to WIWACAM app -> in ‘My Camera’ page, click settings of camera ->
Camera Management -> Indictor LED, turn off it
Once the status LED is turned off, it will only light up briefly during boot
up. During normal operation, the status LED will remain off.
To find out if the camera is working, just check the app to see if it's online or
not.

- 13 -wiwacam.com/support
3. Mobile Power Bank, Recharge and
Battery
3.1 Mobile Power Bank
The device support functioning as standard mobile power bank:
⚫Capacity:5000mAh
⚫Battery Type: Lithium Polymer
⚫Compatible with most of smartphones
⚫2x Input ports:
microUSB input 5V1A or 5V2A
USB C input 5V1A or 5V2A
⚫2x Output ports:
2xUSB port (max 5V2A output)
total output 10watt max
⚫Time of Recharging Power Bank:
approximately 7 hours via 5V1A input
approximately 4.5 hours via 5V2A input
For charging your smartphone or other USB devices:
Just connect the device's output port to your smartphone using the right
USB cable. The power bank will turn on by itself and begin charging.
If need, you can hold down the Power Bank ON/OFF button for about 3
seconds to switch the power bank on or off.
When the power bank is charging a smartphone, the Battery Indicator on
the power bank will only show for a few seconds and then turn off.
To check the battery level, simply press the Power Bank ON/OFF button
quickly. The Battery Indicator will light up again.
Note: Turning off the power bank using the Power Bank ON/OFF button
won't affect whether the camera is turned on or off. The camera's status is
only controlled by the Camera ON/OFF button.
3.2 Camera works by the battery

- 14 -wiwacam.com/support
The camera uses power of mobile power bank too.
A complete charge of the device can keep the camera working for about 10
hours (may less depending on the workload.)
The camera might stop working when the mobile power bank shows that it
has 3% battery remaining, indicated by the digital LED on the Battery
Indicator.
Note: the camera recording works during mobile power bank is recharging.
You can keep the mobile power bank connected to USB power adapter to
keep the camera running 24/7. It is no problem.
Note 1: Please charge the mobile power bank battery fully before running
the camera over the battery for the first time.
Note 2: The mobile power bank battery may need 3 times of full recharge
cycle to active its full capacity. One full recharging cycle means full
recharge battery then run out of the battery.
If you suspect an issue with the battery's capacity, feel free to contact our
support for a check and potential replacement at this email address:
[email protected]
3.3 Turn Off Camera
✓Press and hold the Camera ON/OFF button for about 3 seconds, then
release. This will turn off the camera. (Not press the Power Bank ON/OFF
button)
4. Install microSD card
1. Install microSD card:
Note: Be sure to power off the camera before inserting or removing the
microSD card
Insert the microSD card into the camera with the contact (metal) side facing
in the opposite direction of the Digits LED on the device.
The camera supports microSD card from 4GB to 128GB and supports both
FAT32 and exFAT format.

- 15 -wiwacam.com/support
Note: make sure microSD card has been formatted to FAT32 or exFAT on
PC or MAC before inserting it into the camera.
After inserting the microSD card, by default the camera has enabled
Continuous Recording. You could confirm or change recording settings from
the WIWCAM app. Check Chapter 6.
2. Convert and Play AVX file on PC or MAC:
Camera records to microSD card with .avx file format into microSD card.
(avx format could provide enhanced data loss protection during video data
recording).
To view or download recordings on phone, no extra tools needed. App will
auto convert avx to mp4.
To check on PC/MAC directly, we provide a tool for PC and MAC to
convert avx file to mp4 file.
Download convert tool, check this link:
https://wiwacam.com/how-to-open-avx
5. Reset Camera
You can reset the mini camera. The reset will restore the camera to factory
default settings.

- 16 -wiwacam.com/support
To reset camera:
1. Deatch the Camera Lens Cover from the device first.
2. Plug the device's input port into a power outlet using a USB power adapter
and USB cable.
3. See if the Status LED will be lit up. If Status LED not lit up, press the
Camera ON/OFF button for 2~3 seconds to turn camera on.
4. When the camera is ON, press the RESET button for 3-4 seconds by
Reset Pin (included in the product box), you will see the Status LED starts
to quickly flash blue. Release pressing RESET button, and please wait a
few seconds before performing the next step.
(If the camera does not response to RESET button pressing, try turn on
camera again, or contact us)
5. Wait about 40 seconds, check the Status LED is flashing blue and red, the
camera is now reset.
(after reset, but see the Status LED is NOT flashing blue and red? Just try
reset one more time from the beginning)
After reset, camera will forget all settings, including WiFi name and WiFi
password. You need to setup the camera again as Chapter 2.4.
6. How to Ensure Good Quality Night Vision
The camera is set to Auto Night Vision by default, so there's no need to adjust
any settings. Here's how it works:
⚫When it's dark around the camera, it automatically switches to night mode.
In this mode, the camera uses infrared light and shows a black and white
image. This is the standard for home security cameras and similar devices.
⚫When the surroundings are bright enough, the camera switches to normal
or "day mode." It displays the image captured by natural light and stops
emitting infrared light.
⚫If you see the camera staying in night mode (black and white) even in a
well-lit room, simply wait a few minutes. The MW8 camera detects and
prevents rapid switching between day mode and night mode. If the
camera switches modes frequently within one minute, it will stay in night

- 17 -wiwacam.com/support
mode for 30 minutes. After that, the camera resumes to automatically
detect the lighting conditions again.
To ensure good night vision, please keep the following points in mind:
1) Avoid IR reflections or blocking
Avoid objects or surfaces too close to the camera lens that can block or reflect
infrared (IR) rays. Blocked or reflected IR can greatly affect the quality of
the night vision image. Here are a few examples:
Example 1: The table reflects the IR rays, the video will become blurry,
making it difficult to see any details.
We suggest keeping the camera lens within 1 inch of the edge of the table.
Example 2: A chair blocks part of the night vision, the camera's range
will be limited to around 3ft/1m instead of the intended 20ft/6m.

- 18 -wiwacam.com/support
Here is the night vision image after correcting the two errors above
2) Ensure the camera lens is not placed behind window glass
If you need to monitor the outside through a window, note that IR light cannot
pass through the glass. Instead, the glass will cause strong reflections and
send the IR light back to the camera lens. This results in an overexposed
image, obscuring the outdoor area.

- 19 -wiwacam.com/support
7. Feature Guides
Here are the most frequently used feature guides for the camera.
7.1 Add camera on more smartphones
After the camera is set up and connected to your Wi-Fi, others phone can
directly add the camera, no need to run the camera setup again.
Here are the details.
Preparation:
⚫On the other phone, download and install the WIWACAM app.
⚫Complete register a new user account and log in on the other phone. We
suggest each smartphone should have its own account.
Method 1: In the same local network
1.Connect the smartphone to the same Wi-Fi network as the camera.
2.Start the WIWACAM app. In the ‘My Camera’ page, wait for a while
until a blue bar indicates that a new camera has been detected.
3. click this blue bar, click ADD button. Name the camera, and input the
camera password set by you or the camera owner. Click Complete button.
Done!

- 20 -wiwacam.com/support
Method 2: From outside of home network, or if the camera was not
detected automatically
1. start the WIWACAM app.
2. click the “+” button in the upper right corner, then select “Manual”.
3. Input Camera ID and click ‘NEXT’ button. (Camera ID could be found
on camera body, it is like R001234). Name the camera and input camera