Wizard-tk ON-SQ13 User manual

ON-SQ13
WIFI
1. On/off 2. Mode 3.Charging USB port 4.Memory Card Slot
5. HD camera 6. IR light 7. Power on Indicator light 8. Night vision Indicator light
9. Wifi Indicator light 10. Video Recording/ Photograph Indicator light
Features
●High Resolution pictures. FULL WIFI 1080 DV DC.
●Multi-Purpose holders for options, Applicable to a variety of environments.
●Compact design, portable handheld DV DC.
●Night Vision with 8 IR Lights, stronger night vision.
●WIFI wireless hotspot,video real-time transmission.
●Video format: AVI1920×1080P.
●Picture format: JPG4032×3024.
●USB 2.0 interface of high speed transmission.
●Support 64GB TF card max.
●Support loop recording.
Operation
Indicator light
(1) Red light: Power-on/Standby Blue light: Video Recording/Photograph
Green light:WIFI on
(2) No TF Card: Under the case of wifi off, red light flashing 5 times then
power off. Under the case of wifi on, the green light bright.
(3) Bulit-in TF card: Under the case of wifi off and standby, red light bright,
auto power off after no operation within 1min
FULL HD 1080P
MINI WIFI
User Manual

(4) Low power: Auto power off after red light flashing 2 seconds
Power on/off: after long press the for 3 seconds, red light bright enter
standby status.red light flashing once when device built in TF card. Power
off after long press and red light flashing 5 times
Photograph: Under the case of standby status, shortly press , the red
light flash once, picture done and saved, auto return to standby status.
• Video recording: Under the case of standby, shortly press the , blue light
flashing and enter the mode of video recording, shortly press the
again, auto video save and blue light off, auto return to standby status.
• IR light: Under the mode of video recording,long press for 3
seconds,yellow light bright and IR light on, long press for 3 seconds
again,yellow light and IR light off. Auto return to video recording mode and
blue light flashing.under the case of IR light on but stop video recording,
IR light auto off and return to standby status.
• APP Download: Android mobile phone or tablet PC in android
market/Baidu mobile assistant/ Google play store search "SPORTS DV"
download. IPhone mobile phone in App Store search "SPORTS DV"
download. It can also be downloaded and installed by scanning
instructions or two-dimensional codes on the outer packing box.
Wifi Mode
① No TF Card and Wifi on: Under the case of standby, long press
for 3 seconds, green light bright and Wifi on ,or over 8 seconds auto power
off.
② Bulit in TF card and Wifi off: Under the case of standby, long press
for 3 seconds, green light bright and Wifi on. Long press again for 3
seconds, green light and wifi off
• WIFI connection:
1.Wifi connecting: connecting the network start with “ON-SQ13”like
（ON-SQ13_CE01) in the setting of mobile or tablet wifi; the default
password is “12345678”.

2. When TF card built in and successfully connect wifi,green light on.open
the APP and click “PLAY”enter the interface, it support to operate the video
recording/Photograph on App as well as operate by the device button. If
meet other problem, please click HELP to inquiry. (note: the video recording
will stop if out of APP or return back the interface when watching video
recording.)
(1) Change password: open the phone App and change it in the Settings.
After the password is changed, the device needs to be restarted before it
takes effect.
(2) IR light: Under the case of Wifi video recording, long press for 3
seconds, yellow light bright and IR light on, long press key again for 3
seconds, yellow light and IR light off.(Note: Only choose save video to TF
card IR light can be open, it can’t be open when choose to save video on
phone which would make Wifi off)
USB: Connecting to the computer under any case with USB cable, then
enter the USB mode, now you can operate the disk, the wifi is off under
this mode.
Charging: Built-in can charge Li-battary, if this is your first time use the
device, you need charge first with following ways:
1. Charging by connecting to computer with USB cable.
2. Recording and charging at same time.(connected USB 5V charger or
power bank)
3. The red light is slow flash when charging, red light will long bright after
charging finished.(You can charging more 30 mins to make sure the
charging is 100% full.)
Recording when charging: connecting to the charger, device will power on
automatically, then the next step is same with power on operation.Under the
case of this mode, the device will not power off if no TF card or the card is

full.
Time setting：
Time will be updated after device connect wifi, please operate on App if no
need the watermark of time.
Pay attention：
①
Please ensure insert TF card, if no card, device can’t be
used( but can be used if under the case of wifi on)
②
Please keep the lens at the distance of 50cm or more in a fully
illuminated environment. This will be correct, the color is natural, the
scenery is clear and the picture is stable.
Connect computer：
The device can be connected to the computer under the case of power on,
standby and power off, and the device can use be USB flash for the file copy,
paste, delete and format.
Connect the device to USB port of computer, the red light will long bright wh
en the computer identify the device. You can make the data transmission wh
en the red light slow flash with the sign of removable disk.
Note：
1 After the unit is connected to the computer, if the computer can not
recognize it or the removable disk is not ejected after 30 seconds, reset it
again and again.
2 recommended TF card reader directly to read the video file to
play, and directly through the USB connection to save the machine
built-in memory in the video file, the data may be too large, the
transmission can not keep up, and lead to playback is not smooth
Relevant parameters
item Relevant parameter
Video Format
AVI
Video CODE M-JPEG
Resolution 1920×1080P
Frame Rate 30fps
Proportion 16：9
Resolution 4023x3024 (picture)
format JPG
Battery type Built-in high-capacity lithium polymer
Battery 300mAh
Working time 90 minutes
Voltage DC-5V
MEMORY Max up to 64GB

Speed High speed USB2.0
Port MicroUSB
System
support
Windows me/2000/XP/2003/Vista; Mac Os; Linux;
software In system
Final Note：
① Each time you use the battery and then charge, about to charge
about 2 to 3 hours to fill, the indicator light is filled as much as possible after 30
minutes to ensure that the battery is full of use。
② please press the mode key and the power-on key at same time to
reset if there is an abnormal or dead machine phenomenon happened.
③ Because this product is the real HD DV, the product power
consumption is larger than the Purple, the shell material using zinc alloy parts,
and the use of the product may be some hot state is normal, please do not
worry about product failure, this product is After a long period of time after the
test to ensure that the product is not quality problems when shipped.
Matters needing attention：
Intended use: Please strictly abide by all relevant laws when using your Smart
Charger. The product should not be used for any illegal purposes.
Working temperature: Please use under natural room temperatures. The
recorder may not function properly under extreme heat (above body
temperature).
Working humidity: Please do not put the product in an overly damp or humid
working environment. The product is not waterproof, and may cease to
function properly when wet (e.g rainwater or spills).
Shooting illumination: Please avoid using the device under extreme light such
as powerful spotlights or directsun to avoid damage to the lens.
Cleaning: Avoid using in overly dusty environment, in order to protect the lens
and other components from damage