WMG C29 User manual

Recorder Instruction Manual
Please read the manual before using it.
Statement:
1. First, thanks for using our company's digital products!
2. Please read the manual before using for the proper use of
it.
. As for the information, please back up on your own. Our
company takes no responsibility to any loss of data caused
by abnormal operation of software, hardware, or product
repair, or battery changing, or other accidents, also the
loss caused indirectly by these reasons. Meanwhile, we also
can’t control the possible misunderstanding of the manual
from the customer. Thus, our company won’t take charge of
accidental damage caused by using this manual, also the
third party’s claim for compensation caused by using this
manual.( The product system will occur some part of the
memory, so it’s normal if there’s any difference with the
standard memory)
Note:
1. Please do not attempt to open, repair or modify the product.
2. Please do not use this product in the region with prohibited
use sign of electronic products (such as airplane, etc).
. Please do not put in the mouth of products or accessories.
4. Please do put the product into water or other liquids.
5. Please do not use this product in special cold, hot, humid
or dusty environments.
Warnings:
1. Please do not drop the product itself or its parts, for
avoiding malfunctions.
2. Please do not keep the product under the bright light, or
heat, for extending the life span of the product itself.

. Please charge it sometimes if leave it unused for a long
period, to avoid losing battery function.
4. In order to expand the life span of the battery, please
don’t use it when charging.
5. Please do not force to remove or waggle up and down, side to
side to connect accessories (For example: headphone,
microphone, USB connection, etc.).
6. This machine is for learning tool, our company will out of
any law responsibility caused by the economical or
commercial usage.
7. Please don’t set it under 60℃ environment (such as: sauna
room, inside the packed car), it might reach to 80℃ inside
the car.
8. Our company takes no responsibility to any loss of data when
using the product or service. So if there is important
information in the product memory, please back up on your
own.
9. Please note that this product is prohibited for illegal use.
For example: for the privacy of others or eavesdropping.
Product description of each part:
1: DEL/A-B 7: Hole for hanging 1 : Inner
microphone
2: Vol 8: Earphone jack 14: Menu key
: Vol 9: Record lamp 15: Play
4: USB jack 10: Screen 16: Play
5: Microphone jack 11: Stop key 17: Power key
6: Record key 12: Play/Pause
The basic application method:

 Main function section
Play record System setting Play music
 Special button operation specification
In the manual, “short press”“long press” appear
frequently, their meanings as follows:
1. Short press: After pressing the button, then leave the
finger immediately.
2. Long press: After pressing the button, keep it for a while ,
until the screen with related contents.
The basic application method
 Turn on the power
1. Check the inner lithium battery enough or not.
2. Set the “ON”, after initialization, the screen with “play
record interface”
 Turn off the power
1. When the machine is in standby mode, set to “OFF”, then
the machine turned off;
2. When the machine is in the stop state, press the "Play"
button for a few seconds, the machine shutdowns after
showing "Bye-Bye", which can only turn off the working
state, can’t turn off the power. If no use in a long
period, please turn off the power “OFF”, which could save
power.
. During record, if the battery is going to use up, then it
will shutdown automatically.
※Suggestion: Please stop the machine by “PLAY/PAUSE” , then
turn off the power by “OFF”. If turn off the power
directly, it will reset to defaults.
 Record
1. Start to record ： Turn on the power, machine came into
record interface, short press the “REC” to enter default
state, when the record lamp in a long flash, and the data in
the upper screen start to change, which means the record
state.
2. Pause record ： During record, short press “REC” for
pausing record, lamp and the data in the upper screen flash,
cancel pausing, then short press again the “REC”.
. Save record ：During record process, short press “Pause”
button, “Save” appears on the screen. Enter into play/
standby mode. Repress “PLAY” button, will play current
record file.
4. Turn off record lamp ： During record process, short press
“Menu M” to turn off record lamp, then short press again
“Menu M” to turn on record lamp.

Play/ Pause
Under working
interface, short
press “Play”or
“Play” to choose
play record or
play music. Short
press “Menu M” to enter play interface, short press
“Play” to start play, then short press again “Play” to
pause/play.
Change playing content
Under play state,
short press
“Play” or
“Play” button to
change playing content.
Change music file/record file mode
Under playing music
file or record file
state, short press
“Menu M” to exit
to main menu, short
press “Play”or
“Play” to choose voice play or music play, short press
“Play” for playing confirmation.
Adjust volume
Under playing
music file or
record file state,
short press “Volume” button, then will show the volume
degree, press “Volume+”to increase volume, press
“Volume-” to decrease volume, and there’ll be volume
respond on the screen. After adjustment, short press
“Play” to save the volume and exit the volume adjustment
mode.( It’ll exit automatically if there’s no operation
in 10 seconds.)
 Choose play and
play, Fast
forward, Rewind
Under
playing music file or record file state, short
press “Play”or “Play” to choose the next
play file, long press “Play”or “Play” to
fast forward, rewind.
A-B repeating
When playing record/music file, short press “DEL/A-B” to
set repeat starting point A, then short press “DEL/A-B”
to set repeat ending point B. There’ll be “A-B” in
screen, repress shortly “DEL/A-B” to repeat the content
between A-B, then short press “DEL/A-B” to exit “A-B”
repeat mode.( Default: It back to normal playing after
repeating five times)
Delete file
1. Delete file ： At
the music /
record playing
standby or pause
interface, short press “DEL/A-B” to choose delete, short
press “Play”or “Play” to choose delete single file/
whole file, exit, then short press “Menu M” to confirm
delete, then “deleting” showed on the screen.

2. Cancel deleting
：If need to
cancel deleting,
choose “EXIT”
and short press
“Play” to
cancel deleting, or press “Play” to exit directly.
※Warning ：“ Delete all” means to delete forever, the file
can’t be back, please be cautious.
Set to play
Under playing mode,
short press “Menu
M” to set the
playing menu (cycle
mode, sound effect mode, repeat mode, repeat time, repeat
interval, exit), short press “Play”or “Play” to choose
as follows:
1. Cycle mode：Short
press “Menu M”
to enter cycle
mode, short press
“Play”or
“Play” to
operate. (normal mode, single mode, full mode, exit), short
press “Play” or “Menu M” to confirm and exit the playing
interface.
2. Sound effect
mode：Short press
“Menu M” to
enter sound
effect mode, short press “Play”or “Play” to operate
(nature, rock, pop, classic, soft, jazz, mega bass ), short
press “Play”or “Play” to confirm and exit the playing
interface.
. Repeat mode：Short press “Menu M” to set the repeat start
A, repress shortly “DEL/A-B”to set repeat end B, There’ll
be “A-B” in screen, repress shortly “DEL/A-B” to repeat
the content between A-B, then short press “DEL/A-B” to
exit “A-B” repeat mode.( Default: It back to normal
playing after repeating five times)
4. Repeat time：
Short press
“Menu M” to set
repeat time,
short press
“Play”or
“Play” to choose time (0-10), short press “Play” or
“Menu M” to confirm and exit the playing interface.
5. Repeat interval：
Short press
“Menu M” to set
repeat interval,
short press
“Play”or
“Play” to choose time (0-10), short press “Play” or
“Menu M” to confirm and exit the playing interface.
System setting
Under power on
interface, short
press “Please
press / to input
code”, short press “Menu” to enter next code setting,
choose system setting, short press “Menu” to enter system

setting, short press “Play”or “Play” to choose as
follows
1. System time：
Short press
“Menu M” to
enter time
setting interface, short press “Vol”or “Vol”to operate
(year/month/day/hour/minute/second), short press “Play”or
“Play” to set those accordingly, then short press “Menu
M” to confirm and exit the playing interface.
2. Repeat type ：
Short press
“Menu M” to
enter repeat
type, short press “Play”or “Play” to choose (high-
quality recordings HQ 192Kbps , high-quality sound
control192Kbps VOR, long-time recording 2Kbps, long-time
voice control 2Kbps VOR, high-fidelity recording SHQ
84VOR, then short press “Menu M” to confirm and exit to
menu setting.
. Recording
origin ： Short
press “Menu M”
to enter
recording origin, short press “Play”or “Play” to choose
(microphone, input music, exit), short press “Menu M” to
confirm and exit to menu setting.
4. Monitor switch ：
Shortly press
“Menu M” to
enter monitor
switch, short press “Play”or “Play” to choose (Open /
close monitor), short press “Menu M” to confirm and exit
to menu setting.
5. Backlight time ：
Shortly press
“Menu M” to
enter backlight
time setting, short press “Play”or “Play”(0-29) to
adjust, short press “Menu M” to confirm and exit to menu
setting.
6. Language choice ：
Shortly press
“Menu M” to
enter this
interface, short press “Play”or “Play” to choose
language, then short press “Menu M” confirm and exit to
menu setting.
7. Shut down
setting: Shortly
press “Menu M”
to enter this
interface, short press “Play”or “Play” to choose (Power
saving mode, Sleep mode), short press “Menu M” to enter,
short press “Play”or “Play” to adjust time, short press
“Menu M” to confirm and exit to menu setting.
8. Comparing
adjustment ：
Shortly press
“Menu M” to
enter interface, short press “Play”or “Play” to choose
comparing light (01-15), short press “Menu M” confirm and
exit to menu setting. The lighter of the comparing light,
the brighter of the screen.
9. Storage situation ： Shortly press “Menu M” to enter
interface, you can check the total space and the used space

of the machine. Short press “Menu M” to confirm and exit
to menu setting.
10. Firmware version：Shortly press “Menu M” to check machine
software information. Short press “Menu M” to confirm and
exit to menu setting.
11. Button sound ：
Shortly press
“Menu M” to
enter interface,
short press “Play”or “Play” to adjust （01- 0）. Short
press “Menu M” to confirm and exit to menu setting.
LINE-IN wire recording setting
1. To choose music input or to connect (CD player, Recorder,
DVD) through LINE-IN port, then press the recording button
to record.
2. External microphone recording: After connecting an external
microphone through LINE-IN interface, and use it by the same
way as using built-in microphone.
. Telephone recording: After connecting a telephone box by
LINE-IN interface, and use it as the same as using the
built-in microphone (in general). (Figure 1)
(Figure 1)
Connecting with computer
1. Connect one port of USB to itself , the other one connect
with computer USB.
2. Remove the removable disk properly to avoid missing data.
. When connecting with computer, it can be used as U-disk. You
can upload/download favorite music file or other file by
copy. During transfer the data, can’t stop the connection,
or it would lead missing data.
During downloading
data During
uploading data
During connection
Charge
1. Connect one port of USB with itself, the other one connect

with computer USB. 4 hours can fully charged it, and it will
show full of the battery mark (Please turn on the switch
during charging). This machine power is provided by charging
battery. During charge, the charging mark will show on the
screen, which won’t flicker when fully charged.
2. The battery can
be charged and
also be
discharged, for durable usage of battery. When it shows only
one grid power, please charge timely, not charge until use
up power.
Technology Specification
Difficulty Solution
Problem Cause Solutions
No showing
of the LCD
Low battery;
Check the power on or
off;
Timely charge;
Turn on the power;
Recording
stop
working
Not in the recording
state;
Low battery;
Memory capacity has
been raised to the
limit or full
recording mode;
Turn to recording state;
Timely charge;
Delete some files or move
them to an external device;
Unable to
open audio
files
Low battery;
No audio file;
The minimum volume;
Timely charge;
Confirm documents;
Adjust the volume;
Words on
the screen
are
abnormal
The language
selection correctness
Choose correct language
No sound
from the
speaker
Confirm that there is
earphone;
The minimum volume;
Check the recording
format;
Remove the headset;
Adjust the volume;
Select the correct
recording format;
Item Specification
Space 4GB 8GB 16GB 2GB
2Kbps 280Hr 560Hr 1120Hr 2240Hr
192Kbps 48Hr 96Hr 192Hr 84Hr
84Kbps 24Hr 48Hr 96Hr 192Hr
File quantity 199 pcs
Recording type WAV type
Sampling frequency 16KHz-48KHz
Frequency 24MHz
Recording power 7mA-12mA
Actual maximum output L) 9mW＋(R) 9mW ( 2Ohm)
External
input
Microphone .5pie Stereo jack
Headphone .5pie Stereo jack
USB PC Interface USB1.1/USB2.0 FULL Speed
Inner microphone output 800mW
Inner microphone Dynamic 26mm,8ohm
Inner MIC Non-oriented capacitor microphone
S/N(Noise ratio) 90dB
Power; rated voltage Lithium battery (2 0MA）： .6V-4.2V
USB input rated
voltage/power
5V 00MAH-5V500MAH
Storage Inserted flash memory
Operation temperature -20℃～60℃
Weight About g
Size 85mm× 6mm×14mm
Battery life span
(The power of
charging fully
one time)
Record 21 hours
Play 8 hours (by earphone)

No sound
from
headphones
Confirm whether the
headset is connected
properly;
The minimum volume;
The damaged audio or
MP files caused the
noise or no voice;
Connect the headset
properly;
Adjust the volume;
Check whether audio or MP
files are damaged, make
sure the file integrity;
Unable to
properly
upload/down
load the
audio file
Check whether the USB
cable is damaged;
Whether USB
connection is normal;
Check whether there
are gaps in the
memory;
Ensure that no damage of
the USB connection;
Normal USB cable
connection;
Delete blank memory;
Statement: Our company won’t in charge of data missing caused
by using the machine or repairing it. Therefore please back up
on your own if there’s important data in the machine.