Wolf Power WLED55SM User manual

Instruction Manual
D-LED TV 55”
Model No.: WLED55SM

3. Warnings.
1. The parts needed for installing the stand (supplied)
TV set
Stand
Before installing the stand, please check that
you have all of the parts and that there is no
visible damage. If a part is missing or appears
damaged, please contact customer service.
2. How to install the Stand?
Place the TV face down on a soft and flat surface (blanket, foam, cloth, etc.) to prevent any damage to the TV.
Put the stand to the neck of the TV set as shown below.
1. Before you put on the stand, please make sure the direction is correct
as shown below.
2. When you are putting on the stand, please make sure the neck of the
TV set is in the correct position and attached tightly.
If you do not attach the stand correctly, it will make the TV unstable
and may tip over.
Attach the stand with the supplied screws.
When attaching the stand, make sure the screws
are attached tightly.
If the screws do not attach tightly, it will lead the TV
to be unstable or may even tip over.
a. It can not be tilted to the front or back as
shown below. Doing so may damage the
stand.
Top View
b. It can not be tilted to the right or left as
shown below. Doing so may damage the
stand.
Front
Back
Front
Screws(supplied)
6pcs x M4 x 25

Safety Information
Apps Menu
TV Menu
Picture Menu
Sound
Channel
Setting
2
3
8-10
11
12-13
14
15-16
17
Names of earch Part
4
Connections
Remote Control
Select Input Source
5-6
7
Media 18-19
20
21-23
Setting
24
Simple Troubleshooting
PC Menu
Caution 1
Fixing the stand 25
Contents

1
Correct disposal of this Product
(Waste Electrical & Electronic Equipment (WEEE)
Your product is designed and manufactured with high quality materials and
components which can be recycled and reused.
This symbol means that electrical and electronic equipment, at their end-
of-life should be disposed of separately from your household waste.
Please dispose of this equipment at your local community waste collection/
recycling center.
In the USA there are separate collection systems for used electrical and
electronic products. Please help us to conserve the environment we live in!
The exclamation point within an equilateral triangle is intend to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
The lightning flash with arrowhead symbol, within an equilateral triangle
is intended to alert the user to the presence of un-insulated “dangerous
voltage” within the products enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to the persons.
directives.
Caution

2
To ensure reliable and safe operation of this equipment, please read carefully all the
instructions in this user guide, especially the safety information below.
Electrical safety
To prevent overload, don't share the same mains supply socket with too many other
items of equipment.
- Do not place any connecting wires where they may be stepped on or tripped over.
- Do not place heavy items on the leads, which may damage them.
- Hold the Mains plug, not the wires, when removing from a socket.
- During a thunderstorm or while leaving the TV for long periods, disconnect the aerial
(if outdoor) and mains power from the supply.
- Do not allow water or moisture to enter the TV . Do NOT use in wet
or moist areas such as Bathrooms, steamy kitchens or near swimming pools.
3XOOWKHSOXJRXWLPPHGLDWHOy, and seek professional help if:
- the mains plug or cable is damaged.
- liquid is spilt onto the set, or if it is accidentally exposed to water or moisture.
- anything accidentally penetrates the ventilation slots.
- the set does not work normally.
- Do NOT remove the safety covers. There are no user serviceable parts inside.
You may invalidate the warranty. Qualified personnel only are permitted to service
this apparatus.
- To avoid battery leakage, remove exhausted batteries from the remote control
handset, or when not using for along period.
- Do NOT break open or throw exhausted batteries on a fire.
Physical safety
'R12T block ventilation slots in the back cover. You may place the TV in a cabinet,
but ensure at least 5cm (2") clearance all around the unit.
'R12T tap or shake the TV screen, you may damage the internal circuitry. Take good
care of the remote control, do not drop it or allow it to come into contact with liquids.
7RFOHDQWKH79XVHDVRIWGU\FORWK'R127XVHVROYHQWVRUpetrol based fluids. For
stubborn stains, you may use a damp soft cloth with diluted detergent.
Safety Information

3
User’s Guide Remote Control Batteries
Led Indicator & Remote Control window
(Keep clear)
Front View
1). (IR) Infrared Receiver: Receives IR signals from the remote control.
(Power on/Standby)LED Indicator: Press to turn on and off.
Indicator on(Red) Standby mode
Indicator on(Green) Power on mode
Names of each part
INPUT
:
Press to display the input source menu.
MENU: Press to display the OSD menu, press again to exit the menu.
CH+/-: Press to scan through channels.
VOL+/-: Press to adjust the volume.
:Turn on/standby theTV set.
CH+
CH-
VOL+
VOL-

4
AC POWER IN: Connect to power.
HDMI1/2/3: Connect it to the HDMI of DVD or other equipment.
VGA: For PC display.Connect it to the D-Sub 15 pins analog output connector of the PC.
PC-IN: Connect it to the audio output terminal of PC.
Coax: Digital output to AV receiver.
RJ45: Connect the interface of the network card.
RF:Connect the antenna.
USB1/2:Connect to portable USB device.
YPbPr: Connect theYPbPr output jack of DVD or VCR.
Video: Connect to video intput terminal of external devices.
R/L: Connect to the audio intput terminal of external devices.(shared with YPbPr)
:
Connections
3
Video L in R in
PCRJ45 - in
USB2 USB1
COAX
YPbPr

5
The remote control is using Infra-Red(IR). Point it towards the front of the TV. The remote
control may not work correctly if it is operated out of range or out of angle.
Remote Control
:Home button
Buttons for Android
Buttons for TV
INPUT: Press to display the input source menu.
MENU: System setup menu.
EXIT: Exit the OSD menu.
DISPLAY: Press to display the current mode’s information.
Allows you to navigate the on-screen menus and adjust the
system settings to your preference.
CURSOR KEYS OK
CH / : Scan through channels.
VOL+/-: Adjust the volume.
PICTURE
ASPECT
SOUND
SLEEP
ZOOM IN
ZOOM IN:Make it bigger.
ZOOM OUT
ZOOM OUT:Make it smaller
123
456
789
0
VOL CH
INPUT
DISPLAY
MENU
EXIT
TV/TXT
CANCEL
REVEAL
NICAM/A2
INDEX
SIZE AUDIO
HOLD
SUBTITLE SUBPAGE
CHLIST
TV.TXT: Turn off/on the Teletext display.
CH.LIST: Display the channel list.
SIZE: Press to see top half of page double size,
Press again to see the bottom half of page
double size. Press again for normal size.
CANCEL:Cancel the Teletext display.
REVEAL:Reveal any hidden text.
NICAM/A2 AUDIO: TV Nicam/A2 select.
INDEX:Go to index.
HOLD:Hold or carry on the current subpage.
SUBTITLE: Turn on/off the subtitle display in DTV mode.
SUBPAGE: Press to enter subpages, pressagain to cancel.

6
Remote Control
MEDIA play
REC : Press to start record the program in DTV mode.
: Fast reverse.
: Fast forward.
: Stop program.
:Play/Pause program.
: Turn the TV on/standby.
MUTE: Press to mute the sound, press again or press
VOL+ to unmute.
PICTURE: Select the picture mode.
ASPECT: Change the screen display mode.
SOUND: Select the sound mode.
SLEEP: Standby timer.
NUMBER BUTTONS
Press 0-9 to select a TV channel directly when you
are watching TV.
:Return to the previous channel viewed.
PICTURE
ASPECT
SOUND
SLEEP
ZOOM IN
ZOOM OUT
123
456
789
0
VOL CH
INPUT
DISPLAY
MENU
EXIT
TV/TXT
CANCEL
REVEAL
NICAM/A2
INDEX
SIZE AUDIO
HOLD
SUBTITLE SUBPAGE
CHLIST
: Switch the program digit.
:Previous chapter.
:Next chapter.

7
1. When you press VOL+ to increase the volume and VOL to reduce the
volume.
2. The MUTE symbol will show on one of your screen corners when you
press the MUTE button, press the MUTE button again and the symbol
will disappear.
3. You can put the sound on again either by pressing the MUTE button or
the VOL+ button. The diagram below shows the sound level
in the volume indicator.
-
25
Press MENU button to display the main menu.
ź/ Ÿ: ATV/AV/ YPbPr/PC /
HDMI1/HDMI2/HDMI3
Press ŻŹ button to select SOURCE in the main menu,
then p OK
Press button to select
Press to select source.
ress to enter.
ź/ Ÿ/
OK
（INPUT）
（INPUT）

8
Apps Menu
to
Main menu as shown below.
Press MENU button to display the main menu.
PressŻŹ select what you want, and press to enter.
Apps
PressŻŹto
PressŻŹto
select Apps, and press
select what you want, and press
to enter.
to enter.
Note:
The application above is not as the system default, the user can add or delete application
in the application market, according to their own preferences.
OK
OK
OK
Connecting the camera off, then reset the factory settings in the Android setting and restart the TV.
PressŻŹto
PressźŸ ŻŹto
select All App, and press
select what you want, and press
to enter.
to enter.
OK
OK
Note:
The application above is not as the system default, the user can add or delete application
in the application market, according to their own preferences. Shortcut bar can add up to 5 applications.

11
TV
PressMENU button to display the main menu.
.
Press button to select, p press to enter, ress to back
TV Menu
OK
Ź
Ż
ŻŹ
/

12
Picture Menu
Picture
Press MENU button to display the main menu.
ź/ Ÿ: Picture Mode/Contrast/ Brightness/
Colour/Sharpness/Colour Temperature/Aspect Ratio/Tint DNR
/ŻŹ
PresVŻŹEutton to select PICTURE in the main menu,
then p
Press button to select
Press OK to enter or adjust.
ress to enter
Picture Mode
Press ź/ Ÿbutton to select Picture Mode, then pressŻŹEutton to select.
Standard
Vivid
Gentle
Movie
User
The default mode, to make users experience high-quality images under normal light
Image colors more beautiful, more vivid picture
To make users feel the TV picture
This mode is more suitable for watching movies
User-defined picture settings
softer
Contrast
Adjust image contrast.
Press button to select Press to adjust.ź/ ŸContrast,ŻŹ
Brightness
Adjust image brightness. ( Under the premise of quality assurance watching, by reducing the brightness
of screen can reduce TV energy consumption, it will also reduce the TV operation. )
Press button to select Press to adjust.ź/ ŸBrightness, ŻŹ
Colour
Adjust image color.
Press button to select Press to adjust.
ź/ ŸColour, ŻŹ
OK
Tint 0
/

13
Aspect Ratio
Adjust the aspect ratio of the screen.
( Options: 16:9ˈ4:3 , Zoom1, Zoom2)
Press ź/ Ÿbutton to select , then pressŻŹEutton to select.
Aspect Ratio
D
Tint
NR
T
Press button to select Tint，then press OK button to enter sub-menu.Press button to adjust.
（Not available in PAL）
o filter out and reduces the image noise and improve picture quality.
Press ź/ Ÿbutton to select then pressŻŹEutton to select.ˈ
( Options: ff/ ///.)
DNR
OL
ow Medium High Auto
Note: Depending on the circumstances, the options will be different,
invalid option will be grayed out or not displayed.
Sharpness
Adjust image Sharpness.
ź/ ŸSharpness,ŻŹ
Press button to select Press to adjust.
Colour Temperature
Press button to select p then pressŻŹEutton to select. ź/ ŸColour Temperature, ress to enter,
Cool Produces a gentle blue-hued image.
Warm Produces a red-hued image.
Standard Produces a vivid image.
OK
Picture Menu

14
Sound
Sound
So
SPDIF Type
und Mode
Press ź/ Ÿbutton to select Sound Mode, then pressŻŹEutton to select.
Note: When the sound mode is standard, the value of treble / bass is not adjustable.
Treble
Treble
Bass
Balance
Balance
AV C
AVC
Adjust the sound frequency portion, the user can set the sound mode
Bass
Adjust the sound frequency part, set the sound mode is available to the user.
Adjust the left and right channel output balance.
Press ź/ Ÿbutton to select , then pressŻŹEutton to adjust.
Press ź/ Ÿbutton to select , then pressŻŹEutton to adjust.
Press ź/ Ÿbutton to select , then pressŻŹEutton to adjust.
Press ź/ Ÿbutton to select , then pressŻŹEutton to choose ON/OFF.
When the sound mode is user,it can be adjusted according to the user.
Press MENU button to display the main menu.
ź/ Ÿ: Sound Mode/Treble/ Bass
/Balance/ / SPDIF TypeAVC
/ŻŹ
PresVŻŹEutton to select SOUND in the main menu,
then p
Press button to select
Press to enter or adjust.
ress to enter
Standard Produces a balanced sound in all environments.
Music Preserves the original sound.Good for musical programs.
News Enhanced voice.
Movie Enhances treble and bass for a rich sound experience.
User Select to customize picture settings.
OK
OK

15
Channel
Press MENU button to display the main menu.
ź/ Ÿ: Antenna Type/Auto Tune/Manual Tune
/ŻŹ
PresVŻŹEutton to select CHANNEL in the main menu,
then p
Press button to select
Press to enter or adjust.
ress to enter
Auto Tune
ź/ ŸAuto Tune, Auto Tune.Press button to select press to start
Channel
OK
OK
OK
Auto Tune
Manual Tune

16
Manual Tune
/ Manual Tune, . Press button to select press to enter sub-menu
Channel
Displays the current channel number.
Frequency
Shows the frequency of the current channel.
Colour System
/ Color System. ŻŹ
(A /PAL / NTSC / SECAM)
Skip
/ Skip ŻŹVelect ON/OFF.
Manual Fine Tune
Manually adjust the frequency channels, to make the screen clearer.
/ Manual Fine Tune, ŻŹ
ŻŹ
Press button to select Press to adjust.
Press button to select , Press
Press button to select Press to adjust.
Options: uto
Sound System
/ Sound System. ŻŹ
(D/K, I, B/G, M)
Press button to select Press to adjust.
Options:
Searching
/ Searching.Press button to select Press to start searching.
OK
Channel