Wonbo Hw-730h User manual

Owner's Manual

IP Camera HW-730H

Thank you for choosing our product! To have a comprehensive understanding and using this device, to know all the features and simple operation

method, please read this manual first.

Part 1: Packing List

Check all the accessories if they are complete.

Item No. Accessories Quantity

1 Wonbo 1080P Wifi Home Camera HW-730H 1

2 US standard power + wire 1

3 Instruction manual 1

4 Screws bag 1

Part 2: Software Download

To connect your camera to mobile phone, you need yo download the App "Hopeway" in the cellphone at very first, see below 2 methods.

1. Search and download "Hopeway" in APP Store, Android market etc.

2. Scan the QR code below to download.

Registration and login

Download and install "Hopeway" , register and login. (Support WeChat\QQ\Facebook\Twitter\Line\Mailbox).

Part 3: Device connection

1. WiFi Automatic Configuration

1- 1. Turn on and wait about 10 seconds, The device will broadcast "Device start up" and "Please configure WiFi".

1- 2. Click "WiFi config" or "+" ,enter password and click "start".

1- 3. During theconfiguration process, the device will automatically connect to the router. After the configuration is complete, the configured camera is

displayed in the device list. Click to watch the video.

2. Access point configuration

2- 1. Turn on and wait aboout 10 seconds. The device will broadcast "Device start up" and "Please configure WiFi".

2- 2. Press the "RESET" button at the bottom of the device .The device will broadcast "Switch network". Wait for a certain time, the device will

broadcast "Access point has been established".

2- 3. The phone connects the WiFi named IPC- XXXXX.

2- 4. Return to the device list. Pull down and refresh to see the connected device.

2-5. Click "Settings" (the first time you need to set the device password), click "Network Settings".

2- 6. Click the WiFi name you want to connect, enter the WiFi password, and click "CONFIM". The device broadcast "Switch network" "WiFi

connecting" "Connection is successful, welcome". At this time, return to the device list, pull down and refresh.

3. Wire network configuration

This method is only valid for devices with wired network port. The device is plugged into the Internet cable and power supply. (Mobile phones and

devices need to be in the same network)

Part 4: Function introduction

1. Devices Function 2. Video paly

1- 1. Alarm on/Alarm off.

1- 2. Alarm picture.

1- 3. Tf card record and cloud record.

1- 4. Set the device configuration.

1- 5. Device status.

1- 6. Cloud storage.

1- 7. Unbind or delete the camera.

2- 1. Flip picture.

2- 2. Change pixel.

2- 3. Direction controlling.

2- 4. Full Screen.

2- 5. Voice on-off.

2- 6. Talking press- button.

2- 7. Screenshot.

3. Settings

3- 1. Share camera to others.

3- 2. Set camera name.

3- 3. Set camera password.

3- 4. Set camera network.

3- 5. Motion detection on/ off.

3- 6. Optional HD or SD video, alarm video and all-day recording.

3- 7. Automatically synchronize phone time and custom time and time zone.

3- 8. Set the language for camera prompts.

3- 9. Set the IP address of the camera which is generally used for a wired connection.

3- 10. Firmware version.

4. Cloud storage

4- 1. Click "Cloud".

4- 2. Click "Purchase" to buy a package and pay.

4- 3. Bind/Unbind: bind or unBind package.

4- 4. Disable/enable: start or stop the cloud service.

4- 5. Extend: extended package time 4- 6. Video: cloud video.

Please Note:

The functions on the user manual may be little different with physical, please makethe final products as the standard. The typing errors in this manual