Wonwoo IBZ-S29Q-04 User manual

Before installing and using the camera, please read this instructions thoroughly
and keep for reference.
4 Megapixel IR Bullet Camera
(IBZ-S29Q-04 / IBZ-S29Q-04-POC)
USER'S MANUAL

TABLE OF CONTENTS
2
Table of Contents
Precautions - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3
Introduction and Features - - - - - - - - - - - - - - - - - - - - - - - - 4
Dimensions - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5
Accessories & Connectors - - - - - - - - - - - - - - - - - - - - - - - - 6
Installation - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7
Main Menu - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8
Focus - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 9
Exposure - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 10
White Balance - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 12
Image - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 13
Intelligent - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 15
Special Function - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 16
Display - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 17
Specifications - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 18

3
PRECAUTIONS
■Avoid prolonged use in high temperature and high humidity environment
Use the product within the operating range specified in the specifications.
Avoid locations where heat is generated, and Install in a well-ventilated place.
■Do not install the camera in an unstable place
Confirm that the camera is firmly fixed after installation.
Dropping the product due to poor installation may cause injury.
■Install the camera away from dusty places
This may cause product malfunction, poor image quality, fire or electric shock.
■Do not install the camera under unstable lighting conditions
It is possible to output an inappropriate image due to severe illumination change
or lighting flickering.
■Do not install the camera near gas or oil leaks
Use in a place with flammable materials may cause fire.
Also, keep distance from power line cables or use separate metal piping.
■Do not disassemble the camera or insert foreign objects
There is no warranty liability for products that user disassembled.
■Do not drop the camera or shock it
It may cause malfunction.
■Never keep the camera directly face to strong light.
Exposure to strong light such as sunlight may cause light spreading or light
blurring. In addition, direct sunlight can damage the image sensor.
■Prepare for malfunction due to natural disasters
The grounding work or the installation of the surge protector can minimize damage
to the product due to lightning, etc.
■Be sure to check the specifications of the power supply
Before connecting the power to the product, make sure that the power supply
meets the recommended specifications.

INTRODUCTION & FEATURES
4
IBZ-S29Q-04 : DC12V model
IBZ-S29Q-04-POC : One Cable model
Product Introduction
IBZ-S29Q-04 is a high-resolution camera that outputs 4 megapixel SDI (Serialized
Digital Interface) video and transmits high-definition video over coaxial cable.
It contains high resolution half-inch CMOS image sensor, ISP (Image Signal
Processor) and SDI transfer block inside. In addition, because this product has
dust-proof, water-proof housing and built-in IR-LED that it can provide clear video
even in the outdoor environment or at night. There are two models as follows.
Features
1/1.8", Sony Starvis CMOS sensor
Built-in 3.6~10mm Motorized varifocal Lens
Day & Night (ICR)
2D + 3D DNR (Digital Noise Reduction)
D WDR (Digital Backlight Compensation)
Privacy Masking function
3-Axis Camera Bracket for easy installation
IP67, Aluminum Die-casting Housing
Built-in 4pcs High power IR-LED
Camera Control through RS-485
EX-SDI Video Output
One-Cable function (IBZ-S29Q-04-POC model only)
As well as video transmission, power supply to the camera and camera control
can be performed via coax cable.
DC12V Power (IBZ-S29Q-04)

5
DIMENSIONS

ACCESSORIES & CONNECTORS
6
ACCESSORIES
CONNECTORS
- BNC connector can be connected to a monitor, DVR or video transmitter.
- If necessary, user can control camera through RS-485 communication
- In case of IBZ-S29-04 model, Connect DC12V to camera.
- In case of IBZ-S29-04-POC, camera power can be supplied through coax cable.
In such a case, do not connect DC12V to camera.

INSTALLATION
7
1. Mounting the Mount Bracket
-Using the supplied 4 screws, mount the mount bracket to wall or ceiling.
2. Mounting the Camera
-Using supplied L-wrench, firmly fix the camera to the mount bracket.
3. Supply of power
-Connect DC12V to camera.
-To prevent fire or electric shock, use a reliable power supply.
4. Camera Angle Adjustment
-Adjust the camera direction by turning the pan bracket left or right, the tilt bracket
up or down, then fix the screws tight.
-Also, adjust zoom and focus to get the desired angle of view.

MAIN MENU
Camera menu is subject to change without prior notice for the functional upgrade
or quality improvement. Also, we may use additional slip sheet for the change.
Please check the camera version and the slip sheet if the camera menu and this
manual’s menu is not matched.
MAIN MENU
The menu consists of the “Main Menu” and “Sub Menu”.
Except MODEL, the rest main menus have associated sub menu.
So, if you select each main menu, associated sub menu is displayed.
If you want save the current settings, select [SAVE]
If you do not want save the current settings, select [EXIT]
But, before power off → on, camera will keep the changed current settings.
If you want to restore the default settings, select [DFLT]
◈MODEL : Please keep “IR-CDS” setting without change
►D&N, IR-CDS
▷D&N : Apply to non-IR model only
▷IR-CDS : Apply to IR model
▷COLOR : Apply to non TDN model
8
MENU
MODEL IR-CDS
ZOOM / FOCUS 
EXPOSURE 
WHITE BAL 
IMAGE 
INTELLIGENCE 
SPECIAL FUNC 
DISPLAY 
[EXIT] [SAVE] [DFLT]

MENU
MODEL IR-CDS
ZOOM / FOCUS 
EXPOSURE 
WHITE BAL 
IMAGE 
INTELLIGENCE 
SPECIAL FUNC 
DISPLAY 
[EXIT] [SAVE] [DFLT]
FOCUS
FOCUS
◈FOCUS MODE : Set auto focus mode ►AUTO, MANUAL
◈SCANNING : Set focus scan range ►HALF, FULL
◈ONESHOT : Set readjust focus
►ON : Pressing the [SET] button more than 3 seconds activates the One-
push Auto Focus.
◈SYNC TDN : Performs the One-shot AF when the TDN switched.
◈LENS RESET : Performs the lens initialization.
►ON : Pressing the [SET] button more than 3 seconds activates the Lens
initialization.
◈RE-FOCUS : Set refocusing time interval. ►OFF, ON↲
▷INTERVAL TIME : 1day ~ 10days
9
ZOOM/FOCUS
FOCUS MODE AUTO
SCANNING HALF
ONE SHOT ON
SYNC TDN ON
LENS RESET ON
RE-FOCUS OFF
[BACK] [SAVE] [DFLT]

EXPOSURE
EXPOSURE
◈LENS MODE : Select LENS mode↵
▷INDOOR / OUTDOOR / DEBLUR
◈BRIGHTNESS : Set brightness level ►0(dark) ~ 20(bright) steps
◈SHUT SPEED : Set the shutter operation mode ►AUTO / MANUAL↵
▷Manual Shutter Speed
1/30(25), 1/60(50), 1/100, 1/120, 1/250, 1/500, 1/700, 1/1000, 1/2000,
1/3000, 1/6000, 1/10000, 1/20000, 1/30000 sec
◈DSS : Set maximum DSS (Digital Slow Shutter) operating range.
►OFF / x2, x4 , x8, x16, x32
◈AGC : Set Max. Gain level ►0 ~ 10 steps
◈FLICKERLESS : Set Flickerless mode ►OFF / ON
10
MENU
MODEL IR-CDS
ZOOM / FOCUS 
EXPOSURE 
WHITE BAL 
IMAGE 
INTELLIGENCE 
SPECIAL FUNC 
DISPLAY 
[EXIT] [SAVE] [DFLT]
EXPOSURE
LENS MODE OUTDOOR
BRIGHTNESS 10
SHUT SPEED AUTO
DSS OFF
AGC 8
FLICKERLESS OFF
WDR/BLC OFF
DAY&NIGHT AUTO
[BACK] [SAVE] [DFLT]

EXPOSURE
11
◈WDR/BLC : Set WDR(Wide Dynamic Range) or BLC(Backlight compensation)
►WDR↵
▷MODE : Select WDR mode.
►LINE, FRAME
▷LEVEL : Set WDR level.
►LOW, MID-LOW, MIDDLE, MID-HIGH, HIGH
※WDR does not work at Manual Shutter Mode.
※When WDR on, CVBS output is disabled.
►BLC↵
▷POSITION : Adjust the position of BLC target window
▷SIZE : Adjust the BLC target window size
※Can not use WDR and BLC at the same time.
(When WDR On, BLC will be Off. Also when BLC On, WDR will be Off)
◈DAY&NIGHT : Select how to judge Day & Night condition.
►MODE : Please keep MODEL as “IR-CDS” without change
▷AUTO
※Day&Night condition is decided by built-in illumination sensor.
►DELAY : 0 ~ 255 sec
►THRS : 0 ~ 7
►GAP : LOW, MIDDLE, HIGH
►ANTI-SAT : Improves light saturation by LED (0~20)
►BURST : OFF/ON
►POLARITY : Set external Input polarity
(ACTIVE LOW / ACTIVE HIGH)
▷DAY
※Regardless of the ambient illumination, camera keeps Day mode.
▷NIGHT
※Regardless of the ambient illumination, camera keeps Night mode.
►ANTI-SAT : Improves light saturation by LED (0~20)
►BURST : OFF/ON

WHITE BALANCE
WHITE BALANCE
◈AWB : Set WHITE BALANCE mode
►AUTO / ONE PUSH↵/ MANUAL / INDOOR / OUTDOOR / AUTO-EXT
▷AUTO : Automatically adjusts color according to the lighting condition.
▷ONE PUSH : While ONE PUSH pressed, camera runs the white balance
working. if ONE PUSH released, camera stops white
balance working.
▷MANUAL↵: Camera does not perform white balance working. User can
increase or decrease “RED GAIN” or “BLUE GAIN” manually.
▷INDOOR : Set color temperature to Indoor light (3700°K)
▷OUTDOOR : Set color temperature to Outdoor light (5100°K)
▷AUTO-EXT : It operates in a wider color temperature range than Auto mode.
◈RED GAIN : Adjust R gain value ►0 ~ 20 steps
◈BLUE GAIN : Adjust B gain value ►0 ~ 20 steps
◈CHROMA : Adjust CHROMA gain value ►0 ~ 20 steps
12
MENU
MODEL IR-CDS
ZOOM / FOCUS 
EXPOSURE 
WHITE BAL 
IMAGE 
INTELLIGENCE 
SPECIAL FUNC 
DISPLAY 
[EXIT] [SAVE] [DFLT]
WHITE BAL
MODE AUTO
RED GAIN ---
BLUE GAIN ---
CHROMA 10
[BACK] [SAVE] [DFLT]

IMAGE
IMAGE
◈HLC : Set High Light Compensation.
When camera is shooting extremely bright light source, camera masks the area
to prevent saturation on the monitor.
▷MODE : OFF / ON / NIGHT
▷LEVEL : 0 ~ 20 steps
▷COLOR : 0 ~ 13 steps
◈DNR : Set the use of Digital Noise Reduction
►OFF / LOW / MIDDLE / HIGH / AUTO
◈MIRROR : Set mirror or flip image mode
►OFF / H / V / H&V
▷H : You can mirror the picture horizontally on the monitor
▷V : You can flip the picture vertically on the monitor
▷H&V : You can execute mirror and flip at the same time.
◈SHARPNESS : Adjust sharpness level
►0 ~ 10 steps
13
MENU
MODEL IR-CDS
ZOOM / FOCUS 
EXPOSURE 
WHITE BAL 
IMAGE 
INTELLIGENCE 
SPECIAL FUNC 
DISPLAY 
[EXIT] [SAVE] [DFLT]
IMAGE
HLC 
DNR MIDDLE
MIRROR OFF
SHARPNESS 7
ACE OFF
DEFOG OFF
FREEZE OFF
GAMMA 0.55
E.ZOOM OFF
[BACK] [SAVE] [DFLT]

◈ACE : Set Adaptive Contrast Enhancement function
►OFF / LOW / MIDDLE / HIGH
◈DEFOG : Set Defog function
►OFF / ON↵
▷MODE : AUTO / MANUAL
▷LEVEL : LOW / MIDDLE / HIGH
※You can not use DEFOG and ACE at the same time
(When ACE On, DEFOG will be Off. Also when DEFOG is On, ACE will be Off)
◈Freeze : This function stops video
►OFF / ON
◈GAMMA : Select Gamma
►0.45 / 0.55 / 0.65 / 0.75
◈E.ZOOM
►OFF / ON↵
▷LIMIT : Max x2 ~ x19, x21, x23, x25, x28, x32
▷POSITION : Select maximum digital zoom magnification.
14
IMAGE

INTELLIGENT
INTELLIGENCE
◈PRIVACY : You can hide some areas on the screen
►OFF / ON↵
▷MASK# : Select a number of mask area (1 ~ 24)
▷MODE : Enable or disable mask (OFF / ON)
▷POSITION : Adjust the position of the mask
▷SIZE : Adjust the size of the mask
▷COLOR : Select mask color (0 ~ 13)
▷TRANS : Select mask transparency level (0 ~ 3)
◈MOTION : When there is movement on the screen, camera detects the motion.
►OFF / ON↵
▷AREA# : You can configure up to 3 areas(1~3) of motion detection
▷MODE : OFF / ON (Enable or disable motion detection)
▷SENSITIVITY : Set the sensitivity of motion detection (0 ~ 20 steps)
The lower number, the higher sensitivity.
▷POSITION : Adjust the position of motion detection area
▷SIZE : Adjust the size of motion detection area
▷INTERVAL TIME : Set the detection time interval (0 ~ 255sec)
▷DWELL TIME : Set the motion alarm duration time (0 ~ 255sec)
15
MENU
MODEL IR-CDS
ZOOM / FOCUS 
EXPOSURE 
WHITE BAL 
IMAGE 
INTELLIGENCE 
SPECIAL FUNC 
DISPLAY 
[EXIT] [SAVE] [DFLT]
INTELLIGENCE
PRIVACY OFF
MOTION OFF
[BACK] [SAVE] [DFLT]

SPECIAL FUNCTION
SPECIAL FUNC
16
MENU
MODEL IR-CDS
ZOOM / FOCUS 
EXPOSURE 
WHITE BAL 
IMAGE 
INTELLIGENCE 
SPECIAL FUNC 
DISPLAY 
[EXIT] [SAVE] [DFLT]
SPECIAL FUNC
DEFECT 
IMAGE RANGE FULL
SYSTEM NTSC
HD FORMAT 1440p/30fps
SDI MODE EX270M(1.0)
CVBS ON
COMM 
[BACK] [SAVE
◈DEFECT : Compensates bad pixels on image sensor
◈IMAGE RANGE : Set the bit range of video image
(Full : 100%, Compressed : 75%)
►FULL, COMP, USER↵
▷LEVEL : Set the level of user mode (0 ~ 32)
◈SYSTEM : Select NTSC(30/60fps) or PAL(25/50fps).
◈HD FORMAT : Set digital video output mode
►1440p/30(25)fps, 1080p/30(25)fps, 720p/30(25)fps
◈SDI MODE : Select SDI output mode
►OFF /HD-SDI /EX-SDI 135M(2.0) /EX-SDI 135M+(2.1) /EX-SDI 270M(1.0)
◈CVBS : Select analog output mode
►OFF / ON
◈COMM : Set camera ID, baud rate and protocol
▷ID : Set camera ID
►1 ~ 255
▷BAUD RATE : Set the speed of serial communication
►2400 / 4800 / 9600 / 19200 / 38400 / 57600 / 115200bps
▷PROTOCOL : Select a protocol
►VISCA / PELCO-D / PELCO-P / UPDATE

DISPLAY
DISPLAY
17
DISPLAY
DISP SEL OFF
SET TITLE 
INIT SEL ON
SET INIT MSG 
LANGUAGE ENGLISH
[BACK] [SAVE] [DFLT]
◈DISP SEL : Select items to display on the screen
►OFF / ON↵
▷ID : OFF / ON ▷TITLE : OFF / ON
▷ZOOM RATIO : OFF / ON
▷SYSTEM MSG : OFF / ON
(MD Alarm and Wait message)
◈SET TITLE : Configure camera title
(Text edit - max 40 characters are allowed)
◈INIT SEL : Select messages to display on the initial screen page
►OFF / ON↵
▷ID : OFF / ON ▷BAUDRATE : OFF / ON
▷PROTOCOL : OFF / ON ▷VERSION : OFF / ON
▷INIT MSG : OFF / ON
◈SET INIT MSG : modify initial message.
(Text edit - max 40 characters are allowed)
◈LANGUAGE : Select a language to display
►English / Simplified Chinese / Traditional Chinese / Japanese
※Character Table of Text edit Mode
MENU
MODEL IR-CDS
ZOOM / FOCUS 
EXPOSURE 
WHITE BAL 
IMAGE 
INTELLIGENCE 
SPECIAL FUNC 
DISPLAY 
[EXIT] [SAVE] [DFLT]

SPECIFICATIONS
Image Sensor 1/1.8" Sony Starvis CMOS Sensor
Total Pixels 3096(H) x 2094(V) = 6.48M pixels
Active pixels 3096(H) x 1760(V) = 5.45M pixels
Lens Optical 3x, Digital 32x Zoom
f = 3.6mm ~ 10mm, F1.5 (wide) ~ F2.8 (tele)
FOV Horizontal : 100°~43°, Vertical : 55°~25°
IR-LED High Power IR-LED 4pcs (Up to 50m)
Digital Zoom 2x ~ 32x
Resolution Digital : 1440p30(25), 1080p/30(25)fps, 720p/30(25)fps
Analog : 700TVL
Min. illumination Color(1/30s) : 0.2 lux , BW(1/30s) : 0.05 lux
Color DSS(1/1s) : 0.02 lux, BW DSS(1/1s) : 0.005 lux
Video Output HD : HD-SDI Note1, EX-SDI
Analog SD : CVBS (※Test purpose only)
S/N Ratio more than 50dB (AGC off)
Comm. Baudrate 2400 / 4800 / 9600 / 19200 / 38400 / 57600 / 115200
Focusing Mode Auto / Manual
Shutter Speed 1/30(25) ~ 1/30,000 sec
WDR/BLC OFF / WDR / BLC
White Balance Auto/One Push/Manual/Indoor/Outdoor/Auto-Ext
Power Source DC12V±10%
Power Consumption DC 12V : MAX 850mA
Storage Temperature -20℃~ +60℃(Humidity : 0%RH ~ 90%RH)
Operating Temperature -10℃~ +50℃(Humidity : 0%RH ~ 90%RH)
Weight 1,088g
* Note1 : HD-SDI signals may not exactly match the standard.
* Note2 : Design and specifications are subject to change without notice.
18

P/N :
PRINTED IN KOREA
Distributed by