Woodstock W1713 User manual

Phone: [phone] • Online Technical Support: [email protected]
COPYRIGHT © AUGUST, 2003 BY WOODSTOCK INTERNATIONAL, INC.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT
THE WRITTEN APPROVAL OF WOODSTOCK INTERNATIONAL, INC., REVISED MAY, 2010 (BL)
#5358DS Printed in China
OWNER'S MANUAL
(FOR MODELS MANUFACTURED SINCE 6/03)
MODEL W1713
16" SCROLL SAW
226002

K_`jdXelXcgifm`[\jZi`k`ZXcjX]\kp`ejkilZk`fejfek_\gifg\ij\klg#
fg\iXk`fe#dX`ek\eXeZ\Xe[j\im`Z\f]k_`jdXZ_`e\&\hl`gd\ek%
=X`cli\kfi\X[#le[\ijkXe[Xe[]fccfnk_\`ejkilZk`fej^`m\e`ek_`j
dXelXcdXpi\jlck`ej\i`fljg\ijfeXc`ealip#`eZcl[`e^XdglkXk`fe#
\c\ZkifZlk`fefi[\Xk_%
K_\fne\if]k_`jdXZ_`e\&\hl`gd\ek`jjfc\cpi\jgfej`Yc\]fi`kjjX]\
lj\%K_`ji\jgfej`Y`c`kp`eZcl[\jYlk`jefkc`d`k\[kfgifg\i`ejkXccX$
k`fe`eXjX]\\em`ifed\ek#g\ijfee\ckiX`e`e^Xe[ljX^\Xlk_fi`qX$
k`fe#gifg\i`ejg\Zk`feXe[dX`ek\eXeZ\#dXelXcXmX`cXY`c`kpXe[
Zfdgi\_\ej`fe#Xggc`ZXk`fef]jX]\kp[\m`Z\j#YcX[\&Zlkk\i`ek\^i`kp#
Xe[k_\ljX^\f]g\ijfeXcgifk\Zk`m\\hl`gd\ek%
K_\dXel]XZkli\in`ccefkY\_\c[c`XYc\]fi`ealipfigifg\ikp
[XdX^\]ifde\^c`^\eZ\#`dgifg\ikiX`e`e^#dXZ_`e\df[`]`ZXk`fejfi
d`jlj\%
Jfd\[ljkZi\Xk\[Ypgfn\ijXe[`e^#jXn`e^#^i`e[`e^#[i`cc`e^#Xe[
fk_\iZfejkilZk`feXZk`m`k`\jZfekX`ejZ_\d`ZXcjbefnekfk_\JkXk\f]
:Xc`]fie`XkfZXlj\ZXeZ\i#Y`ik_[\]\Zkjfifk_\ii\gif[lZk`m\_Xid%
Jfd\\oXdgc\jf]k_\j\Z_\d`ZXcjXi\1
 C\X[]ifdc\X[$YXj\[gX`ekj%
 :ipjkXcc`e\j`c`ZX]ifdYi`Zbj#Z\d\ekXe[fk_\idXjfeipgif[lZkj%
 8ij\e`ZXe[Z_ifd`ld]ifdZ_\d`ZXccp$ki\Xk\[cldY\i%
Pflii`jb]ifdk_\j\\ogfjli\jmXi`\j#[\g\e[`e^fe_fnf]k\epfl
[fk_`jkpg\f]nfib%Kfi\[lZ\pfli\ogfjli\kfk_\j\Z_\d`ZXcj1
Nfib`eXn\ccm\ek`cXk\[Xi\X#Xe[nfibn`k_Xggifm\[jX]\kp\hl`g$
d\ek#jlZ_Xjk_fj\[ljkdXjbjk_XkXi\jg\Z`Xccp[\j`^e\[kf]`ck\i
flkd`ZifjZfg`ZgXik`Zc\j%

SET UPELECTRICAL MAINTENANCE SERVICE PARTS
OPERATIONS
SAFETYINTRODUCTION
USE THE QUICK GUIDE PAGE LABELS TO SEARCH OUT INFORMATION FAST!
Contents
INTRODUCTION .....................................2
Woodstock Technical Support .................. 2
About Your New Scroll Saw ..................... 2
Specifications ..................................... 2
SAFETY ...............................................4
Standard Machinery Safety ..................... 4
Additional Safety for Scroll Saws .............. 6
ELECTRICAL .........................................7
110V Operation ................................... 7
Extension Cords .................................. 7
Electrical Specifications ........................ 7
SETUP ................................................8
Unpacking ......................................... 8
Inventory .......................................... 8
Workbench Mounting ............................ 8
Machine Placement .............................. 9
Cleaning Machine................................. 9
Assembly......................................... 10
Installing Pin-End Blades ...................... 11
Installing Plain End Blades.................... 12
Calibrating Table Tilt Scale ................... 13
Dust Collection ................................. 13
Test Run.......................................... 14
OPERATIONS....................................... 15
General .......................................... 15
Adjusting Hold-down Shoe & Blade Guard . 16
Adjusting Air Nozzle ........................... 16
Adjusting Blade Tension ....................... 17
Blade Information .............................. 17
Blade Speed ..................................... 18
Blade Selection Chart ......................... 18
Standard Scroll Cutting........................ 19
Interior Scroll Cutting ......................... 19
MAINTENANCE .................................... 20
General .......................................... 20
Cleaning ......................................... 20
Table ............................................. 20
Lubrication ...................................... 21
Motor Brushes................................... 21
SERVICE ............................................ 22
Troubleshooting................................. 22
PARTS .............................................. 23
Main .............................................. 23
Machine Labels ................................. 25
WARRANTY ........................................ 29

-2-
W1713 Owner's Manual (Mfg. Since 6/03)
INTRODUCTION
Woodstock Technical Support
This machine has been specially designed to provide many years of trouble-free service. Close attention
to detail, ruggedly built parts and a rigid quality control program assure safe and reliable operation.
Woodstock International, Inc. is committed to customer satisfaction. Our intent with this manual is to
include the basic information for safety, setup, operation, maintenance, and service of this product.
We stand behind our machines! In the event that questions arise about your machine, please contact
Woodstock International Technical Support at [phone] or send e-mail to: tech-support@shopfox.
biz. Our knowledgeable staff will help you troubleshoot problems and process warranty claims.
INTRODUCTION
If you need the latest edition of this manual, you can download it from http://www.shopfox.biz.
If you have comments about this manual, please contact us at:
Woodstock International, Inc.
Attn: Technical Documentation Manager
P.O. Box 2309
Bellingham, WA 98227
Email: [e-mail]
About Your New Scroll Saw
Your new SHOP FOX®Model W1713 16" Scroll Saw is specially designed to provide many years of
trouble-free service. Close attention to engineering detail, ruggedly built parts, and a rigid quality
control program assure safe and reliable operation.
The Model W1713 features variable speed blade control, extra large working table, and cast iron
construction. This Scroll Saw also offers a gooseneck work lamp, an air nozzle, a dust port, a 45°
table tilt capacity, and easy blade change system. Uses standard plain and pin-end saw blades.
Specifications
Motor Size..........................1⁄8HP, 120V, 60 Hz
Motor Speed ....................................Variable
No Load Speed ..........................550–1650 SPM
Amp Draw .......................................... 1.2 A
Blade Stroke ......................................... 3⁄4"
Maximum Cutting width ............................16"
Minimum Cutting Thickness ......................... 2"
Machine Weight ................................. 31 lbs.

-3-
W1713 Owner's Manual (Mfg. Since 6/03)
INTRODUCTION
Controls and Features
A
B
C
D
E
G
F
H
J
KI
L
A. Blade Tension Knob
B. Blade Adapters
C. Work Lamp
D. Blade Guard
E. Work Table
F. Table Insert
G. Variable Speed/Power Knob
H. Light ON/OFF Button
I. Dust Port 1
1⁄4"
J. Table Tilt Lock Knob
K. Table Tilt Scale
L. Arm Bushings
M. Hold-down Shoe Rod Lock Knob
N. Upper Blade Holder
O. Air Nozzle
P. Blade Adapter (Mounted)
Q. Hold-down Shoe
R. Hold-down Shoe Rod
N
O
P
Q
R
M

-4-
W1713 Owner's Manual (Mfg. Since 6/03)
SAFETY
J8=<KP
I<8;D8EL8C9<=FI<FG<I8K@E>D8:?@E<%
=8@CLI<KF=FCCFN@EJKIL:K@FEJ9<CFNN@CC
I<JLCK@EG<IJFE8C@EALIP%
JkXe[Xi[JX]\kp@ejkilZk`fej
(% I<8;K?IFL>?K?<<EK@I<D8EL8C9<=FI<JK8IK@E>D8:?@E<IP%DXZ_`e\ipgi\j\ekjj\i`flj
`ealip_XqXi[jkflekiX`e\[lj\ij%
)% 8CN8PJ LJ< 8EJ@ 8GGIFM<; J8=<KP >C8JJ<J N?<E FG<I8K@E> D8:?@E<IP% <m\ip[Xp \p\$
^cXjj\jfecp_Xm\`dgXZki\j`jkXekc\ej\jÇk_\pXi\EFKjX]\kp^cXjj\j%

*% 8CN8PJN<8I8E@FJ?8GGIFM<;I<JG@I8KFIN?<EFG<I8K@E>D8:?@E<IPK?8KGIF;L:<J
;LJK%Nff[[ljk`jXZXiZ`ef^\eXe[ZXeZXlj\ZXeZ\iXe[j\m\i\i\jg`iXkfip`cce\jj\j%
+% 8CN8PJ LJ< ?<8I@E> GIFK<:K@FE N?<E FG<I8K@E> D8:?@E<IP% DXZ_`e\ip ef`j\ ZXe ZXlj\
g\idXe\ek_\Xi`e^[XdX^\%
,% N<8IGIFG<I8GG8I<C%;FEFKn\Xicffj\Zcfk_`e^#^cfm\j#e\Zbk`\j#i`e^j#fia\n\cipn_`Z_dXp
^\kZXl^_k`edfm`e^gXikj%N\Xigifk\Zk`m\_X`iZfm\i`e^kfZfekX`ecfe^_X`iXe[n\Xiefe$jc`g
]ffkn\Xi%
-% E<M<IFG<I8K<D8:?@E<IPN?<EK@I<;#FILE;<IK?<@E=CL<E:<F=;IL>JFI8C:F?FC%
9\d\ekXccpXc\ikXkXcck`d\jn_\eilee`e^dXZ_`e\ip%
.% FECP8CCFNKI8@E<;8E;GIFG<ICPJLG<IM@J<;G<IJFEE<CKFFG<I8K<D8:?@E<IP%DXb\
jli\fg\iXk`fe`ejkilZk`fejXi\jX]\Xe[Zc\Xicple[\ijkff[%
/% B<<G:?@C;I<E8E;M@J@KFIJ8N8P%B\\gXccZ_`c[i\eXe[m`j`kfijXjX]\[`jkXeZ\]ifdk_\nfib
Xi\X%
0% D8B<NFIBJ?FG:?@C;GIFF=%Lj\gX[cfZbj#dXjk\ijn`kZ_\j#Xe[i\dfm\jkXikjn`kZ_b\pj%
@e[`ZXk\jXe`dd`e\ekcp_XqXi[fljj`klXk`fen_`Z_#`]efkXmf`[\[#N@CC
i\jlck`e[\Xk_fij\i`flj`ealip%
@e[`ZXk\jXgfk\ek`Xccp_XqXi[fljj`klXk`fen_`Z_#`]efkXmf`[\[#:FLC;
i\jlck`e[\Xk_fij\i`flj`ealip%
@e[`ZXk\jXgfk\ek`Xccp_XqXi[fljj`klXk`fen_`Z_#`]efkXmf`[\[#D8P
i\jlck`ed`efifidf[\iXk\`ealip%
K_`jjpdYfc`jlj\[kfXc\ikk_\lj\ikflj\]lc`e]fidXk`feXYflkgifg\i
fg\iXk`fef]k_\\hl`gd\ek#Xe[&fiXj`klXk`fek_XkdXpZXlj\[XdX^\
kfk_\dXZ_`e\ip%
EFK@:<
SAFETY Standard
Machinery Safety

-5-
W1713 Owner's Manual (Mfg. Since 6/03)
SAFETY
('% E<M<IC<8M<N?<ED8:?@E<@JILEE@E>%Kliegfn\iF==Xe[XccfnXccdfm`e^gXikjkfZfd\kf
XZfdgc\k\jkfgY\]fi\c\Xm`e^dXZ_`e\leXkk\e[\[%
((% ;FEFKLJ<@E ;8E><IFLJ<EM@IFED<EKJ%;FEFKlj\dXZ_`e\ip`e[Xdg#n\kcfZXk`fej#fi
n_\i\Xep]cXddXYc\fiefo`flj]ld\jdXp\o`jk%
()% B<<GNFIB8I<8:C<8E8E;N<CCC@K%:clkk\iXe[[Xibj_X[fnjdXpZXlj\XZZ`[\ekj%
(*% LJ<8>IFLE;<;<OK<EJ@FE:FI;I8K<;=FIK?<D8:?@E<8DG<I8><%Le[\ij`q\[Zfi[jfm\i$
_\XkXe[cfj\gfn\i%I\gcXZ\\ok\ej`feZfi[j`]k_\pY\Zfd\[XdX^\[%;FEFKlj\\ok\ej`feZfi[j
]fi))'MdXZ_`e\ip%
(+% 8CN8PJ;@J:FEE<:K=IFDGFN<IJFLI:<9<=FI<J<IM@:@E>D8:?@E<IP%DXb\jli\jn`kZ_`j
`eF==gfj`k`feY\]fi\i\Zfee\Zk`e^%
(,% D8@EK8@ED8:?@E<IPN@K?:8I<%B\\gYcX[\jj_XigXe[Zc\Xe]fiY\jkXe[jX]\jkg\i]fidXeZ\%
=fccfn`ejkilZk`fej]ficlYi`ZXk`e^Xe[Z_Xe^`e^XZZ\jjfi`\j%
(-% D8B<JLI<>L8I;J8I<@EGC8:<8E;NFIB:FII<:KCP9<=FI<LJ@E>D8:?@E<IP%
(.% I<DFM< 8;ALJK@E> B<PJ 8E; NI<E:?<J% DXb\ X _XY`k f] Z_\Zb`e^ ]fi b\pj Xe[ X[aljk`e^
ni\eZ_\jY\]fi\klie`e^dXZ_`e\ipFE%
(/% :?<:B =FI ;8D8><; G8IKJ9<=FI< LJ@E> D8:?@E<IP% :_\Zb ]fi Y`e[`e^ Xe[ Xc`^ed\ek f]
gXikj#Yifb\egXikj#gXikdflek`e^#cffj\Yfckj#Xe[Xepfk_\iZfe[`k`fejk_XkdXpX]]\ZkdXZ_`e\
fg\iXk`fe%I\gX`ifii\gcXZ\[XdX^\[gXikj%
(0% LJ<I<:FDD<E;<;8::<JJFI@<J%I\]\ikfk_\`ejkilZk`fedXelXc]fii\Zfdd\e[\[XZZ\jjfi`\j%
K_\lj\f]`dgifg\iXZZ\jjfi`\jdXpZXlj\i`jbf]`ealip%
)'%;FEFK=FI:<D8:?@E<IP%NfibXkk_\jg\\[]fin_`Z_k_\dXZ_`e\fiXZZ\jjfipnXj[\j`^e\[%
)(% J<:LI< NFIBG@<:<% Lj\ ZcXdgj fi X m`j\ kf _fc[ k_\ nfibg`\Z\ n_\e giXZk`ZXc% 8 j\Zli\[
nfibg`\Z\gifk\Zkjpfli_Xe[jXe[]i\\jYfk__Xe[jkffg\iXk\k_\dXZ_`e\%
))% ;FEFKFM<II<8:?%B\\ggifg\i]ffk`e^Xe[YXcXeZ\XkXcck`d\j%
)*% D8EPD8:?@E<JN@CC<A<:KK?<NFIBG@<:<KFN8I;K?<FG<I8KFI%BefnXe[Xmf`[Zfe[`$
k`fejk_XkZXlj\k_\nfibg`\Z\kfb`ZbYXZb%
)+% 8CN8PJCF:BDF9@C<98J<J@=LJ<; 9<=FI<FG<I8K@E>D8:?@E<IP%
),%9< 8N8I< K?8K :<IK8@E ;LJK D8P 9< ?8Q8I;FLJ kf k_\ i\jg`iXkfip jpjk\dj f] g\fgc\ Xe[
Xe`dXcj#\jg\Z`Xccp]`e\[ljk%DXb\jli\pflbefnk_\_XqXi[jXjjfZ`Xk\[n`k_k_\kpg\f][ljkpfl
n`ccY\\ogfj\[kfXe[XcnXpjn\XiXi\jg`iXkfiXggifm\[]fik_Xkkpg\f][ljk%

-6-
W1713 Owner's Manual (Mfg. Since 6/03)
SAFETY
Additional Safety for Scroll Saws
READ and understand this
entire manual before using
this machine. Serious per-
sonal injury may occur
if safety and operational
information is not under-
stood and followed. DO
NOT risk your safety by
not reading!
1. WORKPIECE CONDITION. Scroll saw safety begins with your lumber. Inspect your stock carefully
before you begin a cut. If you have any doubts about the stability or structural integrity of your
stock, DO NOT CUT IT!
2. BLADE CONDITION. To reduce the risk of blade breakage and to ensure good results, always
inspect the blade for cracks and missing teeth before each use. Do not use a damaged or badly
worn blade.
3. HAND PLACEMENT. The blade can quickly cut through flesh and bone. Never position fingers or
hands in the path of the cut. Always wait for the blade to come to a complete stop on its own
before clearing away cut-off pieces.
4. WORKPIECE HANDLING. If the workpiece should slip while cutting, your hand could be drawn into
the moving blade. Always firmly support the workpiece on the table. Use jigs or support fixtures
for small workpieces or complicated cut patterns.
5. RELIEF CUTS. To avoid excessive twisting of the blade that could cause it to break and throw
metal debris in all directions, use relief cuts for curve cuts that tend to twist the blade.
6. BLADE TENSION. Make sure that blade has the proper tension before connecting the saw to power.
A loose blade could become loose and be thrown away from the machine. A blade that has too
much tension could become overly stressed and break apart.
7. ATTENTION TO WORK AREA. Pay attention to the surrounding area when using the saw. Make sure
bystanders are well away from the cutting operation and they are wearing safety glasses. Never
leave the saw unattended when it is connected to power.
8. OBSTRUCTIONS. Plan and check your path of cut before starting the saw to avoid hitting an
obstruction with the workpiece that could cause your hands to slip and contact the moving blade.
9. BLADE GUARD. The blade guard is designed to help keep your hands and fingers safe from the
moving blade. Never operate this saw without the blade guard correctly and firmly installed
as it was intended. Always keep the blade guard as close to the workpiece as possible without
interfering with movement.
10. BLADE CONTACT. Starting the blade when it is in contact with the workpiece could cause blade
breakage, or the workpiece to suddenly slip which could cause your hands to be drawn into the
moving blade. Always wait for the blade to come to full speed before moving the workpiece into
it.
USE this and other machinery with caution
and respect. Always consider safety first,
as it applies to your individual working
conditions. No list of safety guidelines can
be complete—every shop environment is
different. Failure to follow guidelines could
result in serious personal injury, damage
to equipment or poor work results.

-7-
W1713 Owner's Manual (Mfg. Since 6/03)
ELECTRICAL
DO NOT work on your electrical system
if you are unsure about electrical
codes and wiring! Seek assistance from
a qualified electrician. Ignoring this
warning can cause electrocution, fire,
or machine damage.
ELECTRICAL
110V Operation
The Model W1713 is wired for 110V operation. The power
supply circuit used for this machine MUST be grounded
and rated for the amperage given below. Never replace
a circuit breaker with one of higher amperage without
consulting a qualified electrician to ensure compliance
with wiring codes.
This machine must be grounded! The electrical cord
supplied with this machine comes with a grounding pin. If
your outlet does not accommodate a ground pin, have it
replaced by a qualified electrician.
If you are unsure about the wiring codes in your area
or you plan to connect your machine to a shared
circuit, you may create a fire or circuit overload
hazard—consult a qualified electrician to reduce this
risk.
Operating Voltage Amp Draw Min. Circuit Size Plug/Recommended Plug Extension Cord
110V Operation 1.2 Amps 15 Amps NEMA 5-15 16 Gauge, 3-Wire
Figure 1.NEMA 5-15 plug and receptacle.
Electrical Specifications
We do not recommend using an extension cord; however,
if you have no alternative, use the following guidelines:
• UseacordratedforStandardService(S).
• Do not use an extension cord longer than 50 feet.
• Ensurethatthecordhasagroundwireandpin.
• Usethegaugesizelistedbelowasaminimum.
Extension Cords
The machine must be properly set up before it is
safe to operate. DO NOT connect this machine to the
power source until instructed to do so in the "Test
Run" portion of this manual.

-8-
W1713 Owner's Manual (Mfg. Since 6/03)
SETUP
Keep machine disconnected from
power until instructed otherwise.
This machine has been carefully packaged for safe
transportation. If you notice the machine has been
damaged during shipping, please contact your authorized
Shop Fox dealer immediately.
Unpacking
SETUP
The following is a description of the main components
shipped with the Model W1713. Lay the components out
to inventory them.
Note: If you can't find an item on this list, check the
mounting location on the machine or examine the
packaging materials carefully. Occasionally we pre-install
certain components for safer shipping.
Box Inventory Qty
A. Scroll Saw Assembly.......................................1
B. Hex Wrench 4mm..........................................1
C. T-Handle Hex Wrench 3mm ..............................1
D. Pin-End Blades 15 & 18 TPI ..............................2
E. Blade Guard ................................................1
F. Blade Adapters .............................................2
Inventory
The strongest workbench mounting option is a "Through
Mount" where holes are drilled all the way through the
workbench, and hex bolts, washers, and hex nuts are used
to secure the drill press to the workbench, as illustrated
in Figure 2.
Another option for mounting is a "Direct Mount" where the
machine is simply secured to the workbench with a lag
screw, as illustrated in Figure 3.
Workbench Mounting
-ACHINE"ASE
7ORKBENCH
7dai
;aViLVh]Zg
;aViLVh]Zg
AdX`LVh]Zg
=ZmCji
Figure 2.Example of a through mount.
-ACHINE"ASE
7ORKBENCH
AV\HXgZl
;aViLVh]Zg
Figure 3.Example of a direct mount.

-9-
W1713 Owner's Manual (Mfg. Since 6/03)
SETUP
• Workbench Load: This machine distributes
a heavy load in a small footprint. Some
workbenches may require additional bracing
to support both machine and operator.
• Working Clearances: Consider existing and
anticipated needs, size of material to be
processed through the machine, and space
for auxiliary stands, work tables or other
machinery when establishing a location for
your Machine Type.
• Lighting: Lighting should be bright enough
to eliminate shadow and prevent eye strain.
• Electrical: Electrical circuits must be
dedicated or large enough to handle
amperage requirements. Outlets must be
located near each machine, so power or
extension cords are clear of high-traffic
areas. Follow local electrical codes for
proper installation of new lighting, outlets,
or circuits.
MAKE your shop “child
safe.” Ensure that your
workplace is inaccessible
to children by closing and
locking all entrances when
you are away. NEVER allow
untrained visitors in your
shop when assembling,
adjusting or operating
equipment.
Cleaning Machine
The table and other unpainted parts of your
scroll saw are coated with a waxy grease that
protects them from corrosion during shipment.
Clean this grease off with a solvent cleaner or
citrus-based degreaser. DO NOT use chlorine-
based solvents such as brake parts cleaner or
acetone—if you happen to splash some onto a
painted surface, you will ruin the finish.
Machine Placement
NEVER clean with gasoline
or other petroleum-
based solvents. Most have
low flash points, which
make them extremely
flammable. A risk of
explosion and burning
exists if these products
are used. Serious personal
injury may occur if this
warning is ignored!
ALWAYS work in well-
ventilated areas far from
possible ignition sources
when using solvents to
clean machinery. Many
solvents are toxic when
inhaled or ingested. Use
care when disposing
of waste rags and
towels to be sure they
DO NOT create fire or
environmental hazards.

-10-
W1713 Owner's Manual (Mfg. Since 6/03)
SETUP
Assembly
The blade guard is designed to
keep your hands and fingers safe.
This guard MUST be properly
installed BEFORE connecting the
scroll saw to power to reduce the
risk of hand or finger injury.
Tools Needed Qty
Phillips Screwdriver #2.........................................1
Wrench 8mm.....................................................1
To install the blade guard, do these steps:
1. Make sure the saw is disconnected from power.
2. Use the pre-installed Phillips head mounting screw,
hex nut, and washers to install the blade guard onto
the top of the hold-down shoe rod, as shown in
Figure 4.
Note: Over-tightening the mounting screw could
crack the plastic arms of the blade guard.
3. Pivot the guard up-and-down to ensure that it moves
smoothly. If necessary, loosen the mounting screw
until the movement is smooth.
Keep machine disconnected from
power until instructed otherwise.
Figure 4.Blade guard properly installed.
Mounting Screw
Blade
Guard

-11-
W1713 Owner's Manual (Mfg. Since 6/03)
SETUP
Installing Pin-End Blades
Scroll saw blades are classified as either "pin-end"
(mounting pins in the ends of the blade) or "plain end" (no
pins). The blades included with your scroll saw are pin-
end blades.
To install a pin-end blade, do these steps:
1. DISCONNECT MACHINE FROM POWER!
2. Rotate the blade tension knob counterclockwise to
decrease the blade tension.
3. Remove the table insert.
4. Slide the saw blade down through the table hole so
that the teeth face down and forward.
5. Position the lower pin-ends underneath the V-notch
in the lower blade holder, as shown in Figure 5.
Note: Attempt to wiggle the blade end back-and-
forth with slight pressure to make sure the pins are
seated in the indents of the blade holder.
6. Press the upper blade holder down, then slide the
upper pin-ends onto the V-notch of the upper blade
holder, as shown in Figure 6.
7. Replace the table insert.
8. Properly tension the blade (refer to Adjusting Blade
Tension on Page 17 for detailed instructions).
Figure 5.Pin-end blade properly mounted
onto the lower blade holder.
V-Notch
Lower
Blade
Holder
Figure 6.Pin-end blade properly mounted
onto the upper blade holder.
Upper Blade Holder

-12-
W1713 Owner's Manual (Mfg. Since 6/03)
SETUP
Installing Plain End Blades
The V-notches of the upper and lower blade holders are
designed to hold pin-end blades. However, with the use of
the blade adapters, plain end blades that do not have the
mounting pins can be used with your scroll saw.
Tools Needed Qty
Hex Wrench 4mm ...............................................1
To install a plain end blade, do these steps:
1. DISCONNECT MACHINE FROM POWER!
2. Rotate the blade tension knob counterclockwise to
decrease the blade tension.
3. Remove the table insert.
4. Loosen the blade adapter set screws to allow the
saw blade ends to slide through the adapters, as
illustrated in Figure 7.
Note: The set screws can be threaded into either
set of adapter holes depending on whether side
cutting or straight cutting is desired.
5. Thread one set screw in until it just makes contact
with the blade. Keep the other set screw loose for
now, as illustrated in Figure 7.
6. Without letting the adapters slip off the ends of the
blade, place them in the indents on the top arm, as
illustrated in Figure 8, with the set screws that are
in contact with the blade facing down.
Note: Performing Step 6 will correctly set the
overall length of the assembly to properly fit on the
blade holders.
7. Fully tighten the top adapter set screws to firmly
secure the blade with the adapters.
8. Slide one end of the blade assembly through the
table hole and place the adapter over the mounting
arm of the blade holder, then press the upper blade
holder down and mount the other adapter over its
mounting arm (see Figure 9).
9. Replace the table insert, then properly tension the
blade (refer to Adjusting Blade Tension on Page 17
for detailed instructions).
Set
Screw
Blade
Set
Screw
Figure 7.Plain end blade inserted and
secured into a blade adapter.
Blade Adapters
Blade
Figure 8.Blade with the blade adapters
inserted into the adapter indents.
Figure 9.Plain end blade and adapter
mounted on the upper blade holder.
Mounting Arm

-13-
W1713 Owner's Manual (Mfg. Since 6/03)
SETUP
Dust Collection
We recommend that you connect the 1
1⁄4" dust port of
your scroll saw (see Figure 11) to a shop vacuum to keep
the wood debris from accumulating underneath the table
insert, which could interfere with blade movement.
Calibrating Table Tilt
Scale
The table lock knob and tilt scale are used to tilt the
table for horizontal angle cuts.
Note: The table tilt scale is only an approximate scale
and should not be used when precise angle measurements
are required for the operation.
Tools Needed Qty
Phillips Screwdriver #2.........................................1
Wrench 10mm ...................................................1
To calibrate the table tilt scale, do these steps:
1. DISCONNECT MACHINE FROM POWER!
2. Loosen the jam nut on the table stop bolt shown in
Figure 10, then thread the stop bolt in so that it
will not interfere with the table adjustment.
3. Loosen the table lock knob (see Figure 11).
4. Place a small machinist's square up against the
blade, adjust the table tilt until the table is flat
against the bottom of the square, then re-tighten
the lock knob.
5. If necessary, use the Phillips head screw on the
pointer to adjust the pointer tip to the zero mark on
the scale.
6. Thread the table stop bolt up so that it just contacts
the bottom of the table, then secure it in place with
the jam nut.
Figure 11.Table tilt controls and scroll
saw dust port.
1
1⁄4" Dust Port
Lock Knob
Pointer
Figure 10.Table stop bolt.
Table
Stop Bolt

-14-
W1713 Owner's Manual (Mfg. Since 6/03)
SETUP
Once the assembly is complete, test run your scroll saw to
make sure it runs properly.
If, during the test run, you cannot easily locate the
source of an unusual noise or vibration, stop using the
machine immediately, then review the Troubleshooting
on Page 22.
If you still cannot remedy a problem, contact our Tech
Support at [phone] for assistance.
To test run the saw, do these steps:
1. Make sure you understand the safety instructions
at the beginning of the manual, and verify that the
machine is setup properly.
2. Ensure all tools and objects used during set up are
cleared away from the machine.
3. Make sure the blade is properly installed and
tensioned.
4. Connect the machine to the power source.
5. Rotate the variable speed/power knob clockwise to
turn the machine ON.
6. Listen to and watch for abnormal noises or actions.
The machine should run smoothly with little or no
vibration or rubbing noises.
— Strange or unusual noises should be investigated
and corrected before operating the machine
further. Always disconnect the machine from
power when investigating or correcting potential
problems.
7. Turn the machine OFF.
Test Run
Projectiles thrown from the machine
could cause serious eye injury. Wear
safety glasses to reduce the risk of
injury.
Loose hair and clothing could get
caught in machinery and cause serious
personal injury. Keep loose clothing
rolled up and long hair tied up and
away from machinery.

-15-
W1713 Owner's Manual (Mfg. Since 6/03)
OPERATIONS
OPERATIONS
General
This machine will perform many types of operations
that are beyond the scope of this manual. Many of these
operations can be dangerous or deadly if performed
incorrectly.
The instructions in this section are written with the
understanding that the operator has the necessary
knowledge and skills to operate this machine. If at any
time you are experiencing difficulties performing any
operation, stop using the machine!
If you are an inexperienced operator, we strongly
recommend that you read books or trade articles, or seek
training from an experienced scroll saw operator before
performing any unfamiliar operations. Above all, your
safety should come first!
Always wear safety glasses when oper-
ating this machine. Failure to comply
may result in serious personal injury.
DO NOT investigate problems or adjust
the machine while it is running. Wait
until the machine is turned OFF,
unplugged and all working parts
have come to a complete stop before
proceeding!
READ and understand this entire instruc-
tion manual before using this machine.
Serious personal injury may occur if
safety and operational information is not
understood and followed. DO NOT risk
your safety by not reading!

-16-
W1713 Owner's Manual (Mfg. Since 6/03)
OPERATIONS
Adjusting Hold-down
Shoe & Blade Guard
The hold-down shoe and blade guard are mounted on
the hold-down shoe rod and are adjusted together. The
hold-down shoe is designed to keep the workpiece from
raising up with the force of the moving blade, and the
blade guard is designed to keep debris from flying at the
operator and to be a barrier between the blade and the
operator's hands.
To adjust the hold-down shoe and blade guard, do
these steps:
1. DISCONNECT MACHINE FROM POWER!
2. Loosen the hold-down shoe rod lock knob, then
adjust the shoe until it is as close as possible and
flat to the workpiece without interfering with its
smooth movement across the table (see Figure 12).
Note: When you require the table to be tilted for
your cutting operation, use the shoe screw to adjust
the shoe so that it remains flat to the workpiece.
3. Re-tighten the rod lock knob and re-check for
smooth workpiece movement.
The blade guard is designed to
keep your hands and fingers safe.
This guard MUST be properly
installed BEFORE connecting the
scroll saw to power to reduce the
risk of hand or finger injury.
Adjusting Air Nozzle
The air nozzle blows air at the cutting location to keep
wood debris away from the line of the cut. Use the air
nozzle screw shown in Figure 12 to adjust the position of
the nozzle that best suits your operation.
Figure 12.Hold-down shoe/blade guard
and air nozzle controls.
Blade Guard
Lock
Knob
Air Nozzle
Screw
Shoe Screw
Hold-down Shoe

-17-
W1713 Owner's Manual (Mfg. Since 6/03)
OPERATIONS
Adjusting Blade Tension
Having proper blade tension is critical to safe cutting
operations that produce good results. Blades that are
tensioned correctly will also last longer and are less likely
to break during the cutting operation. However, finding
the correct amount of tension for each type of blade is
matter of trial-and-error and experience.
If the blade is tensioned too tight, the blade could break
and cause serious personal injury from flying debris. If the
blade is tensioned too loose, the blade will likely fall off
during the cutting operation and cause injury hazards.
Get into the habit of plucking the saw blade like a guitar
string before every use. With time and experience, you
will recognize the distinct sound that indicates the proper
amount of blade tension.
Turn the blade tension knob shown in Figure 13 clockwise
to increase the blade tension, and counterclockwise to
decrease it.
Figure 13.Blade tension knob.
Blade Tension Knob
Blade Information
Important issues regarding blade performance:
• Typically,ascrollsawbladewillstaysharpfrom1⁄2
to 2 hours of use, depending on how the blade is
used and the type of material being cut.
• Bestcuttingresultswillbeachievedwhencutting
workpieces less than 1" thick.
• Whencuttingworkpiecesthickerthan1",movethe
workpiece through the blade very slowly.
• Bladeswilldullquicklywhencuttingplywood,
hardwoods, and laminates.
• Exertingexcessivesidepressureonthebladegreatly
increases the chance of blade breakage.

-18-
W1713 Owner's Manual (Mfg. Since 6/03)
OPERATIONS
Blade Speed
The blade speed can be varied between 550 and 1650
SPM (strokes per minute). Blade speed adjustment is made
with the variable speed/power knob on the front of the
scroll saw, as shown in Figure 14.
Figure 14.Variable speed/power knob.
Variable Speed/
Power Knob
Blade Selection Chart
Use the information in the chart below as a guideline for selecting the right blade and blade speed for
your operation.
Teeth Per Inch Width Thickness SPM Workpiece Material
10 TPI 0.110 " 0.020" 1200–1650 General purpose blade for cutting hard and
soft woods between 3⁄16"–2". Also good for
plastics, paper, felt, and bone.
15 TPI 0.110 " 0.020" 700–1200 Thin wood and plastic between 3⁄32"–1⁄2".
18 TPI 0.095" 0.010" 550–700 Good for tight radius cutting in thin hard
and soft woods between 3⁄32"–
1⁄8". Also good
for thin pieces of bone, ivory, plastics and
veneer.
Figure 15.Blade selection chart.