TRANSALP 2 - User manual
7
ENG
1.1- Concept
TRANSALP 2 is a harness for recreational paragliding, approved for a max-
imum weight of 120 kg. It is very lightweight and with a very small volume,
ideal for those wanting to combine the sport of ying with trekking or climb-
ing.
TRANSALP 2 is a harness that is easy to put on and simple to use , designed
for maximum comfort in ight, and easy and lightweight during transport
and during ground handling.
TRANSALP 2 is designed to be a Hike & Fly product, weighing only 880 g
(size M). The innovative geometry of the strap system and the GET UP safe
leg strap closing system has been designed for easy donning of the harness
and for precise, smooth handling.
Painstakingly designed in every detail, TRANSALP 2 can be made more or
less stable by adjusting the length of the chest strap.
1.2 - Protection and safety
TRANSALP 2 does not provide any protection in standard format. You can
choose a ventral emergency container and an inatable dorsal protection
attachment as optional extras.
Harness Impact Pad Report
Inspection certificate number: PH_348.2021
Manufacturer data: Sample data:
Manufacturer name: Woody Valley srl Name impact pad: n/a
Representative: Simone Caldana Impact pad intgrated: No
Street: Via Vienna 92 Impact pad type: Inflatable
Post code place: 30121 Trento Weight of sample [kg]: 0.41
Country: Italy Serial number: n/a
Harness model: TransAlp 2
22
R.H. [%] 39
1005
Summary of Impact pad test (1)
(3)
Duration at 38 [g]
in [ms]
(4)
Duration at 20
[g] in [ms]
(5)
Diff. of test 1
and 2 [%]
(6)
34.93 0.00 24.17 2.52 n/a
PR 0.00 0.00 0.00 n/a n/a
Manufacturer Instrument Type no S/N
Burster/MTS Accelerometer 100 g 89010-100 1263567
JDC elec Geos n°11 Skywatch Geos n°11 Unit11
This declaration must not be reproduced in part without the written permission of AIR TURQUOISE SA.
The validation of this test report is given by the signature of the test manager on the Inspection Certificate no 94.20
Test sample attached to dummy in flying
position, without emergency parachute
Test sample attached to dummy in flying
position, Including emergency parachute
(2)
(1) Calculated values in tests reports include the value minus the uncertainty (on safe side) / The uncertainty stated is the expanded uncertainty obtained by multiplying the standard
uncertainty by the coverage factor k = 2. The value of the measurand lies within the assigned range of values with a probability of 95%.
(3) Maximum peak of impact should be less or equal to 50 [g], (4) If any, the maximum duration in at 38 [g] should be less or equal to 7 [ms], (5) If any, the maximum duration in at 20 [g]
should be less or equal to 25 [ms]. (6)The test should be done twice, and the 2nd test the maximum peak should not differe more than 20% from the first test, maximum peak.
(2) The dummy is lifted minimum up to 1.65 m, and impact pad is mounted on. Where the impact occurs, measure distance from bottom of impact pad to ground.
Air Turquoise SA, having thoroughly assessed the sample mentioned above, declares it was found conform with all requirements defined by the following norms:
Airworthiness Requirements NfL 2-565-20 - European Standard EN1651 :2018
Rev 06 I 25.08.2021 Page 1 of 2 ISO 94.22
Inspection certificate number:
PH_348.2021 Name impact pad: n/a
Test results of Impact pad test
P1 P2 PR1 PR2
Maximum peak of impact [g]
Impact duration at +38 [g] in [ms]
Impact duration at +20 [g] in [ms]
Uncertainty k=2 [g]
Diff. between test 1 and 2 [%]
100.00 102.52 100.00 0.00
without emergency parachute
including emergency parachute
-10.00
10.00
30.00
50.00
3.80 4.30 4.80 5.30 5.80 6.30 6.80 7.30 7.80
[g]
Time [s]
P1 20g 38g
-10.00
10.00
30.00
50.00
3.60 4.10 4.60 5.10 5.60 6.10 6.60 7.10 7.60
[g]
Time [s]
P2 20g 38g
-10.00
10.00
30.00
50.00
0.00 2.00 4.00 6.00 8.00 10.00 12.00 14.00 16.00 18.00 20.00
[g]
Time [s]
PR1 20g 38g
-10.00
10.00
30.00
50.00
0.00 2.00 4.00 6.00 8.00 10.00 12.00 14.00 16.00 18.00 20.00
[g]
Time [s]
PR2 20g 38g
Rev 06 I 25.08.2021 Page 2 of 2 ISO 94.22
