Workzone TITANIUM MWW706S-35L-1200WC User manual
User Manual
Product
Info
https://help.tools/
Read all safety warnings and all instructions
thoroughly before operating this product.
Ensure you keep your manual in a
safe place for future reference.
IM ed 7; 06/2018
MODEL No.: MWW706S-35L-1200WC, PRODUCT No.: 61406
61406
2400W WET & DRY
VACUUM WITH
POWER TAKE OFF
Contents
QR codes take you where you want to go
quicky and easily
Whether you require product information, spare parts or accessories,
details on warranties or aftersales service, or if you want to watch
a product demonstration video, our QR codes will take you there in
no time at all.
What is a QR code?
A QR-code (QR=Quick Response) is a type of matrix that can be read
with a smartphone camera and that contains a link to a website or
contact details, for example.
Advantage: You are not required to manually enter a website address
or contact details.
How it works
To scan the QR code, all you need is a smartphone with QR codes reader
software and an Internet connection*. This type of software can be
downloaded for free from your smartphone’s app store.
Try it out now
Just scan the QR code with your smartphone and
nd out more about the Aldi product you have
purchased*.
Pack Contents /Parts 2
Description of Symbols 3
General power tool safety warnings 4
Specic Safety Instructions 8
Parts List 10
Assembly 12
Assembly of the wheels 12
Assembly of the Carry Handle 13
Assembly for Dry Vacuuming – HEPA Filter 13
Assembly for Wet Vacuuming – Foam Filter 14
Fitting the Flexible Hose 15
Fitting the extension tubes and tools 16
Dry Vacuuming 17
Wet Vacuuming 18
Automatic Mode using the Wet and Dry Vacuum 19
with an AC / electric power tool or other product 19
Automatic Mode for Electric Power Tools 20
Blowing Function 21
Maintenance 22
Cleaning 22
Cleaning the Appliance Head 22
Cleaning the Tank 23
Cleaning the HEPA Filter 23
Cleaning the Foam Filter 23
Check the Floating Safety Valve 23
General Maintenance 23
Warranty 24
Environmental protection 24
What your 3 year warranty means 25
Accessories and After Sales parts 25
Troubleshooting 26
Technical Specications 27
Product
Info
* Depending on your tarif you may be charged
for the connection.
2400W Wet & Dry Vacuum
AFTER SALES SUPPORT
MODEL No.: MWW706S-35L-1200WC • 06/2018 • 61406 (toll free)
4
Pack contents / parts
Congratulations on the purchase of your WORKZONE® TITANIUM 2400W Wet &
Dry Vacuum. When you open your packaging, rst remove all items and check
there are no parts damaged or missing. If you nd anything wrong, do not
operate the product until the parts have been replaced or the fault has been
rectied. Failure to do so could result in serious personal injury.
Intended use of the 2400W Wet and Dry Vacuum
NOTE: This product is for private domestic DIY use only.
It is not suitable for commercial, industrial or trade use.
This product is suitable for private home use i.e for use with cleaning dirt,
debris and liquids from garages, workshops, courtyards, patios and garden
environment, as well as dust extraction function using the AC outlet for electric
power tools (rated below 1200W). This Wet & Dry Vacuum is NOT suitable for
every day household vacuuming as this will cause premature damage.
IMPORTANT INFORMATION.
NOTE: First time users or inexperienced operators pay particular attention to the
operation of the 2400W Wet and Dry Vacuum, including details of assembling
and preparation on pages 10-16, Operation on pages 16-21 and
maintenance procedures on pages 22-23.
Contents of carton
2 3
Description of symbols
The rating plate on your product may show symbols. These represent
important information about the product or instructions on its use.
Conforms to relevant standards for electrical safety
and electromagnetic compatibility.
Read these instructions for use carefully.
Wear hearing protection. Wear eye protection.
Wear breathing protection.
Waste electrical products should not be
disposed of with household waste.
Warning.
36 Month Warranty Period.
36
1 x 2400W Wet and Dry Vacuum
3 x Extension Tubes
1 x Flexible Hose (1.5m x 32mm)
1 x Foam Filter
1 x HEPA Filter
1 x Floor Tool
1 x Crevice Tool
4 x Castor wheels
1 x Carry handle
(+2 x assembly screws)
1 x Instruction Manual
1 x Warranty Card & Certicate
1 x Quick Start Guide
MODEL No.: MWW706S-35L-1200WC, PRODUCT No.: 61406 MODEL No.: MWW706S-35L-1200WC, PRODUCT No.: 61406
General power tool safety warnings
This appliance is not intended for use by persons (including children with
reduced physical, sensory or mental abilities or lacking experience and/
or knowledge, unless they are supervised by a person responsible for
their safety or are instructed by these persons on the use of the appliance.
Children should be supervised, to ensure that they do not play with the
appliance.
Check the power cord and mains plug regularly for damage. If the supply
cord or mains plug is damaged, discontinue use immediately and have it
inspected and replaced by a qualied electrician in order to avoid a hazard.
Always unplug the appliance after use and before cleaning or changing
the lters or accessories.
WARNING! Read all safety warnings, instructions, illustrations
and specications provided with this power tool.
Failure to follow all instructions listed below may result in electric
shock, re and/or serious injury.
Save all warnings and instructions for future reference.
The term“power tool”in the warnings refers to your mains operated
(corded) power tool or battery operated (cordless) power tool.
1. Work area safety
a. Keep work area clean and well lit. Cluttered or dark areas invite
accidents. Rags, cloths, cord, string and similar items should never be
left around the work area.
b. Do not operate power tools in explosive environments, such as in
the presence of ammable liquids, gases, or dust. Power tools create
sparks, which may ignite the dust or fumes.
c. Keep children and bystanders away while operating a power tool.
Distractions can cause the operator to lose control.
2. Electrical safety
a. Power tool plugs must match the outlet. Never modify the plug
in any way. Do not use any adapter plugs with earthed (grounded)
power tools. Unmodied plugs and matching outlets will reduce risk of
electric shock.
b. Avoid body contact with grounded surfaces such as pipes,
radiators, ranges and refrigerators. There is increased risk of electric
shock if your body is grounded.
c. Do not expose power tools to rain or wet conditions. Water entering
a power tool will increase the risk of electric shock.
d. Do not abuse the cord. Never use the cord for carrying, pulling or
unplugging the power tool. Keep cord away from heat, oil, sharp edges
or moving parts. Replace damaged cords immediately.
Damaged or entangled cords increase the risk of electric shock.
e. When operating a power tool outdoors, use an extension cord
suitable for outdoor use. Use of a cord suitable for outdoor reduces
the risk of electric shock.
f. If operating a power tool in a damp location is unavoidable, use
a residual current device (RCD) protected supply. Use of an RCD
reduces the risk of electric shock.
NOTE: The term“residual current device (RCD) can be replaced by the
term“ground fault circuit interrupter (GFCI) or“earth leakage circuit
breaker (ELCB)”.
3. Personal safety
a. Stay alert, watch what you are doing and use common sense when
operating a power tool. Do not use a power tool while you are tired
or under the inuence of drugs, alcohol or medication. A moment of
inattention while operating power tools may result in serious personal
injury.
b. Use personal protective equipment. Always wear eye protection.
Protective equipment such as dust mask, non-skid safety shoes, hard
hat, or hearing protection will reduce personal injuries.
4 5
MODEL No.: MWW706S-35L-1200WC, PRODUCT No.: 61406 MODEL No.: MWW706S-35L-1200WC, PRODUCT No.: 61406
General power tool safety warnings
c. Prevent unintentional starting. Ensure the switch is in the“o”
position before connecting to power source and/or battery pack,
picking up or carrying the tool. Carrying power tools with your nger
on the switch or energising power tools that have the switch on invites
accidents.
d. Remove any adjusting key or wrench before turning the power tool
on. A wrench or key left attached to a rotating part of the power tool
may result in personal injury.
e. Do not overreach. Keep proper footing and balance at all times. This
enables better control of the power tool in unexpected situations.
f. Dress properly. Do not wear loose clothing or jewellery. Keep your
hair, clothing and gloves away from moving parts. Loose clothes,
jewellery or long hair can be caught in moving parts.
g. If devices are provided for the connection of dust extraction and
collection facilities, ensure these are connected and properly used.
Use of dust collection can reduce dust-related hazards.
4. Power tool use and care
a. Do not force the power tools. Use the correct power tool for your
application. The correct power tool will do the job better and safer at
the rate for which it was designed.
b. Do not use the power tool if the switch does not turn it on and o.
Any power tool that cannot be controlled with the switch is dangerous
and must be repaired.
c. Disconnect the plug from the power source and/or the battery pack
from the power tool before making any adjustments, changing
accessories, or storing power tools. Such preventive safety measures
reduce the risk of starting the power tool accidentally.
d. Store idle power tools out of the reach of children and do not allow
persons unfamiliar with the power tool or these instructions to
operate the power tool. Power tools are dangerous in the hands of
untrained users.
e. Maintain power tools and accessories. Check for misalignment or
binding of moving parts, breakage of parts and any other condition
that may aect the power tool’s operation. If damaged, have the
power tool repaired before use.
Many accidents are caused by poorly maintained power tools.
f. Keep cutting tools sharp and clean. Properly maintained cutting tools
with sharp cutting edges are less likely to bind and are easier to control.
g. Use the power tool, accessories and tool bits etc. in accordance
with these instructions, taking into account the working conditions
and the work to be performed. Use of the power tool for operations
dierent from those intended could result in a hazardous situation.
h. Keep handles and grasping surfaces dry, clean and free from oil and
grease.
Slippery handles and grasping surfaces do not allow for safe handling
and control of the tool in unexpected situations.
5. Service
a. Have your power tool serviced by a qualied repair person using
only identical replacement parts. This will ensure that the safety of the
power tool is maintained.
6 7
MODEL No.: MWW706S-35L-1200WC, PRODUCT No.: 61406 MODEL No.: MWW706S-35L-1200WC, PRODUCT No.: 61406
AFTER SALES SUPPORT
(toll free)
2400W Wet & Dry Vacuum
MODEL No.: MWW706S-35L-1200WC • 06/2018 • 61406
11
Specic Safety Instructions
• Never use the vacuum without a lter. Check that the correct lter is
used for the correct application and that the lter is securely tted at all
times.
• The foam lter may only be used for wet vacuuming.
• The HEPA lter may only be used for dry vacuuming.
• Do not vacuum anything that is burning or smoking, such as cigarettes,
matches, hot ashes, or hot coals. Do not vacuum large fragments of glass
and sharp objects.
• This appliance must not be used in areas where a risk of explosion is
present.
• Certain materials may produce explosive vapours or mixtures when
agitated by the suction air. Never vacuum up the following materials or
use the appliance where the following materials are present:
• Flammable, Explosive or combustible gases, liquids and dust particles
(reactive dust particles), including gasoline.
• Reactive metal dust particles (such as aluminium, magnesium, zinc) in
combination with highly alkaline or acidic detergents.
• Undiluted acids and alkalis.
• Organic solvents (such as petrol, paint thinners, acetone, heating oil and
other oils).
• Burning matches, ash and cigarette butts In addition, these substances
may cause the appliance materials to corrode.
• Do not vacuum up any toner dust, which is used in printers, copiers
and fax machines for example, because it is electrically conductive. In
addition, it is possible that it will not be completely ltered out by the
lter system of the Wet and Dry Vacuum and can be released into the air
via the exhaust fan.
• This appliance is NOT suitable for vacuuming ne dust which can
be harmful to health and to the safe operation of the appliance.
The ne dust particles, such as sanding plaster, can accumulate
around the HEPA lter which will cause reduced suction and motor
overheating. This may damage the appliance.
• Do not use without installing the correct lter for the job required.
• Do not continue to use the vacuum when the tank is full of liquid.
• Do not vacuum water from containers, such as sinks, tubs, barrels, etc.
• Make sure that the correct lter has been inserted securely in its holder
before using the appliance. The wrong lter or an incorrectly installed
lter can cause damage to the appliance and will immediately void the
warranty.
• Check the oating safety valve (19) often for free movement.
• This Wet & Dry Vacuum has been designed for DIY use in the shed,
workshop or garage.
•This Wet & Dry Vacuum is NOT suitable for every day household
vacuuming as this will cause premature damage to the machine and
will void the warranty. This Wet & Dry Vacuum must NOT be used to
replace your household daily vacuum cleaner.
8 9
MODEL No.: MWW706S-35L-1200WC, PRODUCT No.: 61406 MODEL No.: MWW706S-35L-1200WC, PRODUCT No.: 61406
2400W Wet & Dry Vacuum
AFTER SALES SUPPORT
MODEL No.: MWW706S-35L-1200WC • 06/2018 • 61406 (toll free)
AFTER SALES SUPPORT
(toll free)
2400W Wet & Dry Vacuum
MODEL No.: MWW706S-35L-1200WC • 06/2018 • 61406
10 11
1. Carry Handle
2. Appliance head
3. ON/OFF switch
4. AC outlet socket
5. On board storage / holders
6. Side Locking handle (x2)
7. Flexible Hose Outlet - Suction
8. Flexible Hose Outlet - Blower
9. Power cord
10. Tank
11. Drain Screw
12. Base
13. Castor wheels (x4)
14. Filter basket
15. Floating Safety Valve
16. HEPA lter
17. Flexible Hose
18. Extension Tubes (x3)
19. Foam Filter
20. Floor Tool
21. Crevice Tool
1 2
14
16
5
8
9
19
15
14
Part List Part List
Parts List
20
11
13
18
10
5
3
4
7
13
12
18
18
5
5
1
2
6
2117
2400W Wet & Dry Vacuum
AFTER SALES SUPPORT
MODEL No.: MWW706S-35L-1200WC • 06/2018 • 61406 (toll free)
AFTER SALES SUPPORT
(toll free)
2400W Wet & Dry Vacuum
MODEL No.: MWW706S-35L-1200WC • 06/2018 • 61406
12 13
WARNING:
• To prevent serious injury from accidental operation, turn the
power switch of the vacuum o and unplug the appliance from its
electrical outlet before performing any procedure in this section.
• Before you connect the vacuum to a mains supply, make sure that
the data on the rating / technical label is identical to the mains data.
• The Wet and Dry Vacuum should only be connected to a mains
power supply socket; an RCD (Residual Current Device) is
recommended.
The Wet and Dry Vacuum requires some assembly prior to use. This includes
assembly of the wheels, and dependent upon the use of the product, the
exible hose, tubes, lters, and accessories. The following detail covers the
assembly required for each function of the Wet and Dry Vacuum.
Assembly of the wheels
1. Remove the appliance head (2) from the tank (10) by unlocking the
2 x side locking handles (6) pulling them outwards, then upwards (Fig A).
Then turn the tank (10) upside down.
2. Fit the 4 x castor wheels (13) by inserting the mounting pin on the castor
wheel (13) into the designated mounting hole on the underside of the
base (12). Firmly push the castor wheels (13) into the mounting holes
(Fig B).
NOTE: Take care not to damage the castor wheel.
They do not need to be forced into position.
3. When all 4 castor wheels (13) are tted, turn
the product the right way up, and re-attach
the appliance head (2) ensuring you align the
notches on the ridge of the tank lip with the
side locking handles, and secure the 2 side
locking handles (6) in position (Fig C).
Assembly of the Carry Handle
1. Place the carry handle (1) in the grooves on
the top of the appliance head (2) so that they
are tted and align correctly (Fig D).
2. Using a phillips screwdriver, insert and secure
the screws through each side of the handle until
secure (Fig E).
Assembly for Dry Vacuuming –
HEPA Filter
WARNING: Never use the vacuum without
a lter. Check that the lter is securely tted
at all times.
The Wet and Dry Vacuum is tted with the HEPA
lter (16) used for dry vacuuming upon purchase.
To continue assembly for dry vacuuming, continue
to the‘Fitting the exible hose’section on page 15.
Assembly Assembly
Assembly
B.
D.
A.
C.
Notch
E.
Tighten
2400W Wet & Dry Vacuum
AFTER SALES SUPPORT
MODEL No.: MWW706S-35L-1200WC • 06/2018 • 61406 (toll free)
AFTER SALES SUPPORT
(toll free)
2400W Wet & Dry Vacuum
MODEL No.: MWW706S-35L-1200WC • 06/2018 • 61406
14 15
Assembly Assembly
Assembly for Wet Vacuuming – Foam Filter
WARNING: Never use the vacuum without a lter. Check that the lter
is securely tted at all times.
1. Remove the appliance head (2) from the tank (10) by unlocking the 2 x
side locking handles (6) pulling them outwards, then upwards (Fig A).
Place the appliance head (2) upside down onto a at surface, or on its side
(if the carry handle is already assembled).
2. Remove the HEPA lter (16) (installed upon purchase) by pulling it away
from the appliance head (2) (Fig F).
3. Slip the foam lter (19) over the lter basket (14) (Fig.G). Ensure the foam
lter (19) covers the full lter basket (14) (Fig H).
NOTE: The foam lter (19) is only suitable for WET vacuuming.
IMPORTANT: Regularly clean the foam lter (19) and allow it to dry before
resuming vacuuming.
IMPORTANT: DO NOT use the HEPA lter for wet vacuuming (the HEPA
lter is pre-installed upon purchase).
IMPORTANT: The Wet and Dry Vacuum should only be connected
to a mains power supply socket; an RCD (Residual Current Device) is
recommended.
4. Re-assemble the appliance head (2) back onto the tank (10), and secure
the 2 x side locking handles (6).
NOTE: Always unplug the appliance after use and before cleaning or
changing the lters or accessories.
Fitting the Flexible Hose
Connect the exible hose (17) to the exible hose
outlet depending on the application required:
1. Vacuuming
Connect the exible hose (17) to the exible
hose outlet – suction (7) by inserting into the
outlet and aligning the arrow and locking pin
on the end of the exible hose (17), with the
arrow and ridge on the top of the exible hose
outlet – suction (7). This should ensure the
locking pin on the exible hose (17) aligns
with the ridge in the exible hose outlet –
suction (7). Rotate the exible hose (17) to the
left to secure the hose into position (Fig I/J)
2. Blowing
Connect the exible hose (17) to the exible
hose outlet – blowing (8) by inserting into the
outlet and aligning the arrow and locking pin
on the end of the exible hose (17), with the
ridge on the top of the exible hose outlet –
blowing (8). This should ensure the locking pin
on the exible hose (17) aligns with the ridge
in the exible hose outlet – blowing (8). Rotate
the exible hose (17) to the left to secure the
hose into position (Fig K/L)
H.
I.
J.
K.
L.
G.F.
2400W Wet & Dry Vacuum
AFTER SALES SUPPORT
MODEL No.: MWW706S-35L-1200WC • 06/2018 • 61406 (toll free)
AFTER SALES SUPPORT
(toll free)
2400W Wet & Dry Vacuum
MODEL No.: MWW706S-35L-1200WC • 06/2018 • 61406
16 17
Assembly Operation
Fitting the extension tubes and tools
1. To t an extension tube (18) to the end of the
exible hose (17), apply the larger opening end
of an extension tube (18) over the end of the
exible hose (17) (Fig M).
2. To add an additional (2 or 3) exible tube/s,
apply the larger opening end of the extension
tube/s (18) over the rst extension tube until
secure (Fig N).
3. For vacuuming, either the oor tool (20), or
crevice tool (21) can be added to the end of the
last extension tube (18) by simply pushing it
onto the extensions tube (Fig O/P)
Dry Vacuuming
WARNING: Users must strictly observe all
warnings and information contained in section
‘General Safety Instructions’and in section
‘Specic Safety Instructions’ before operating this
appliance.
WARNING: DO NOT use the foam lter (19)
for dry vacuuming applications.
IMPORTANT: The Wet and Dry Vacuum should
only be connected to a mains power supply
socket; an RCD (Residual Current Device) is
recommended.
1. Ensure the tank (10) is completely dry and free
from dust and dirt.
2. Only use the HEPA lter (16) for dry vacuuming
applications (Fig R). Ensure you have already
tted the exible hose (17), extension
tubes (18), and if required, the oor tool
(20) or crevice tool (21) for dry vacuuming
applications.
IMPORTANT: Ensure the HEPA lter is securely
tted before starting the Wet and Dry Vacuum.
3. Plug the power cord (9) into the mains power
outlet and turn on.
4. To commence vacuum mode operation, press
the “I” on the ON/OFF switch (3) (Fig S).
5. To turn o vacuum mode, press the “O” on the
ON/OFF switch (3) (Fig T).
* Dust bags (61406-DB) can also be used for dry
vacuuming and can be purchased separately as
an accessory. Refer to page 25 for details.
On/O switch (Fig Q):
Switch Position 0: OFF (All operations shut o)
Switch Position I: For normal vacuuming
operation (wet or dry)
Switch Position II: Automatic Mode for Power
Tool operation. The vacuum motor will only turn
ON when a power tool, which is plugged into the
AC outlet socket (4) is switched ON. The vacuum
motor will turn OFF when the power tool is switched OFF.
M.
N.
R.
O.
S.
P.
T.
Q.
Operation
2400W Wet & Dry Vacuum
AFTER SALES SUPPORT
MODEL No.: MWW706S-35L-1200WC • 06/2018 • 61406 (toll free)
AFTER SALES SUPPORT
(toll free)
2400W Wet & Dry Vacuum
MODEL No.: MWW706S-35L-1200WC • 06/2018 • 61406
18 19
Model#: DP250LS 5-speed Drill Press
230 – 240V ~ 50Hz 250W
no. 500-2500 min-1 Ø13mm
EARTHED APPLIANCE
Serial No:
If cordset is damaged, have it replaced
by an authorised service centre.
250W
Power tool
rated power
Product (example): Watts:
Drill / Hammer Drill Up to 1200W
Table Saw Up to 1200W
Circular Saws Up to 1200W
Bench Drills / Drill Press Up to 1200W
Mitre Saw Up to 1200W
WARNING: Check the tank (10) regularly
and empty the waste collected when it is
about 2/3 full.
WARNING: The Wet and Dry Vacuum is not
suitable for the vacuuming of combustible
liquids. Refer to section‘Specic Safety
Instructions’ before operating this appliance.
IMPORTANT: Be aware that a full tank can be very
heavy. In this event, place the appliance over a
drain and carefully open the drain screw (11) to
empty the liquid waste.
7. To empty the tank, rstly ensure you are in an
area where you plan to disperse the waste water.
8. Open the drain screw (11) by turning it anti-
clockwise (Fig V) and then drain the liquid from
inside the tank (10) (Fig W).
Automatic Mode using the Wet and Dry
Vacuum with an AC / electric power tool
or other product.
The Wet and Dry Vacuum includes an AC outlet
socket (4) for use with an AC / electric power
tool or other device that you want to activate the
vacuum with while the tool is in operation (Fig X).
The main purpose of using this function is for dust
extraction from electric power tools.
The AC outlet socket (4) will only operate on tools
that have an AC power requirement of up to 1200
Watts and only using one tool connected at a
time.
To establish the power draw of your AC / electric
power tool, refer to the rating / technical label on
the tool, per example Fig Y.
WARNING: Check the HEPA lter (16) regularly for any blockages
which may reduce the suction and cause motor overheating. If the
vacuum noise changes, immediately switch o the appliance by
pressing on the “O” on the ON/OFF switch and check the HEPA lter (16).
Clean the HEPA lter (16) ( following cleaning instructions on page 23) and
empty the tank (10) if required.
WARNING: Check the tank (10) regularly and empty the waste
collected when it is about 2/3 full.
Wet Vacuuming
WARNING: Users must strictly observe all warnings and information
contained in section‘General Safety Instructions’and in section
‘Specic Safety Instructions’before operating this appliance.
WARNING: DO NOT use the HEPA lter (16) for wet vacuuming
applications.
IMPORTANT: The Wet and Dry Vacuum should only be connected to a mains
power supply socket; an RCD (Residual Current Device) is recommended.
1. Ensure the tank (10) is completely dry and free from dust and dirt.
2. Only use the foam lter (19) for wet vacuuming
applications (Fig U). Ensure you have already
tted the exible hose (17), extension tubes (18),
and if required, the oor tool (20) or crevice tool
(21) for wet vacuuming applications.
IMPORTANT: Ensure the foam lter (19) is
securely tted before starting the Wet and Dry
Vacuum.
3. Plug the power cord (9) into the mains power
outlet and turn on.
4. To commence vacuum mode operation, press the “I” on the ON/OFF
switch (3) (Fig S).
5. To turn o vacuum mode, press the “O” on the ON/OFF switch (3) (Fig T).
6. When wet vacuuming, the oating safety valve (15) closes when the
maximum tank level is reached. In doing so, the suction noise of the
vacuum will change and become louder. When this happens, you
must switch o the vacuum and empty the tank.
Operation Operation
U.
V.
W.
X.
Y.
2400W Wet & Dry Vacuum
AFTER SALES SUPPORT
MODEL No.: MWW706S-35L-1200WC • 06/2018 • 61406 (toll free)
AFTER SALES SUPPORT
(toll free)
2400W Wet & Dry Vacuum
MODEL No.: MWW706S-35L-1200WC • 06/2018 • 61406
20 21
Operation Operation
Automatic Mode for Electric Power Tools
1. Connect the exible hose (17) to the exible
hose outlet – suction (7) by inserting into the
outlet and aligning the arrow and locking pin on
the end of the exible hose (17), with the arrow
and ridge on the top of the exible hose outlet
– suction (7). This should ensure the locking pin
on the exible hose (17) aligns with the ridge in
the exible hose outlet – suction (7). Rotate the
exible hose (17) to the left to secure the hose
into position (Fig Z).
2. Ensure the HEPA lter (16) is secured on the
appliance head (2) (Fig AA).
3. Connect the power cable of your AC / electric
power tool to the AC outlet socket (4) (Fig AB).
The automatic AC outlet socket (4) is ideal for
power tools up to 1200W. Check the rating label
of your power tool before connecting to the AC
socket outlet (4) (Fig Y).
4. Connect the opposite end of exible hose (17)
to the dust extractor connector on your AC /
electric power tool. Check that the connections
are secure and airtight (Fig AC).
Press the ON/OFF Switch (3) to position “II” -
Automatic Mode (Fig AD).
IMPORTANT: When you switch“ON”the
connected AC / electric power tool, the
vacuum switches ON at the same time.
When you switch“OFF”the connected AC /
electric power tool, the vacuum switches
OFF also (after a pre-set delay).
5. When you have nished your task, press “O”
on the ON/OFF switch (3) (Fig AE).
WARNING: Check the tank (10) regularly
and empty the waste collected when it is
about 2/3 full.
AA.
AB.
AC.
Z.
AD. AE. AF.
WARNING: Check the HEPA lter (16) regularly for any blockages
which may reduce the suction and overheat the motor. If the vacuum
noise changes, immediately switch o the appliance and check the
HEPA lter (16). Clean the HEPA lter (16) (instructions can be found on page
23) and empty the tank (10) if required.
* Dust bags (61406-DB) can also be used for dust extraction in Automatic
mode for electric power tools and can be purchased separately as an
accessory. Refer to page 25 for details.
NOTE: For automatic mode ,The Wet & Dry Vacuum is tted with a thermal
cut-out device, which will automatically turn o the vacuum if the power
of an AC / electric power tool or other device you connected is over
the maximum 1200W. When this happens, immediately switch o the
appliance by pressing on the“O” on the ON/OFF switch (3), disconnect the
power tool, leave the vacuum 5-10 minutes, then,connect the power tool
with rated power up to 1200W. Press the ON/OFF switch (3) to position“II”
-Automatic Mode to continue the job.
Blowing Function
WARNING: Wear a dust mask and eye protection if blowing
creates dust that might be inhaled.
WARNING: Keep bystanders clear from blowing debris.
CAUTION: Any material left in the tank (10) may be blown out, causing injury.
1. Make sure the tank (10) is empty and completely dry before using it as a
blower.
2. Connect the exible hose (17) to the exible hose outlet – blowing (8) by
inserting into the outlet and aligning the arrow and locking pin on the
end of the exible hose (17), with the ridge on the top of the exible hose
outlet – blowing (8).
2400W Wet & Dry Vacuum
AFTER SALES SUPPORT
MODEL No.: MWW706S-35L-1200WC • 06/2018 • 61406 (toll free)
AFTER SALES SUPPORT
(toll free)
2400W Wet & Dry Vacuum
MODEL No.: MWW706S-35L-1200WC • 06/2018 • 61406
22 23
Operation Maintenance
This should ensure the locking pin on the exible hose (17) aligns with the
ridge in the exible hose outlet – blowing (8). Rotate the exible hose (17)
to the left to secure the hose into position (Fig AF)
3. Select and attach additional extension tubes if required (Refer page 16).
4. Before turning ON, ensure you are rmly holding the end of the exible
hose (17), or extension tube/s (18) if added (Fig AF).
5. Press the “I” on the
ON/OFF Switch (3)
to turn ON (Fig AG).
To turn OFF, press the
“O” on the ON/OFF
switch (Fig AH).
AH.AG.
Cleaning
WARNING! You must pull out the power plug from the mains outlet
before commencing any cleaning, maintenance or inspection work
procedures on the appliance.
• Keep all safety devices, air vents and the motor housing and appliance
head (2) free of dirt and dust.
• We recommend that you clean and dry the appliance immediately after
each use.
Cleaning the Appliance Head
• Clean the appliance head (2) regularly with a damp cloth and some soap
followed by wiping down and drying before storing away.
• Do not submerse the appliance head (2) in water or allow water to enter
the appliance head (2).
• Do not use cleaning agents or solvents. These may be aggressive to the
plastic parts on the appliance.
Cleaning the Tank
• The tank (10) can be cleaned with a damp cloth and soap or rinsed under
running water depending on the amount of dirt. Wipe down and dry
before storing away.
Cleaning the HEPA Filter
• Clean the HEPA lter (16) regularly by carefully patting it and cleaning it
with a ne brush or hand brush (not supplied).
• Do not submerse the HEPA lter in water. Do not use a damp cloth to
clean.
Cleaning the Foam Filter
• Clean the foam lter (19) with a little soap under running water.
• Allow the foam lter (19) to completely air-dry before reinstalling or
storing away. Do not wring dry.
Check the Floating Safety Valve
• Check the oating safety valve (15) often to ensure it moves freely within
the lter basket (14). To do this, take the appliance head (2) by the handle
and tip it carefully so that the lter basket (14) is facing upwards. The
oating safety valve (15) should move freely up and down.
General Maintenance
• Before each use, inspect the general condition of the appliance and check
for the following:
• Loose hardware or screws.
• Misalignment or binding of moving parts.
• Damaged or electrical wiring.
• Check lters are securely tted.
• Damaged or cracked tank.
• Any other condition that may aect safe operation
If the supply cord is damaged, it must be replaced by the manufacturer,
its service agent or similarly qualied persons in order to avoid a hazard.
Maintenance
2400W Wet & Dry Vacuum
AFTER SALES SUPPORT
MODEL No.: MWW706S-35L-1200WC • 06/2018 • 61406 (toll free)
AFTER SALES SUPPORT
(toll free)
2400W Wet & Dry Vacuum
MODEL No.: MWW706S-35L-1200WC • 06/2018 • 61406
24 25
1. Foam Filter (61406-FF)
2. HEPA Filter (61404-HF)
3. Dust Bag
(61406-DB)
4. Flexible Hose
(61406-FH)
5. Extension Tube Set
(61406-ET)
6. Floor Tool (61406-FT)
7. Crevice Tool (61406-CT)
Warranty Warranty
Your new WORKZONE® TITANIUM Wet and Dry Vacuum will more than satisfy
your expectations. It has been manufactured under stringent WORKZONE®
TITANIUM. Quality Standards to meet superior performance criteria.
You will nd your new Wet and Dry Vacuum easy and safe to operate, and,
with proper care, it will give you many years of dependable service.
CAUTION. Carefully read through this entire instruction manual before using
your new WORKZONE® TITANIUM Wet and Dry Vacuum.
Take special care to heed the Cautions and Warnings.
Your WORKZONE® TITANIUM Wet and Dry Vacuum has many features that will
make your job faster and easier. Safety, performance, and dependability have
been given top priority in the development of this WORKZONE® TITANIUM
Wet and Dry Vacuum, making it easy to maintain and operate.
Use only WORKZONE® TITANIUM replacement parts for your product.
Non-conforming parts or modications made to parts will void your
warranty.
Environmental protection
Recycle unwanted materials instead of disposing of them as waste.
All tools, hoses and packaging should be sorted, taken to the local
recycling centre and disposed of in an environmentally safe way.
What your 3 year warranty means
Great care has gone into the manufacture of this product and it should
therefore provide you with years of good service when used properly.
In the event of product failure within its intended use over the course of
the rst 3 years after the date of purchase, we will remedy the problem as
quickly as possible once it has been brought to our attention. In the unlikely
event of such an occurrence, or if you require any information about the
product please contact us via our after sales support services, details of
which can be found in this manual and on the product itself. After Sales
Support TEL: 1800 909 909 or email: help@powertoolsupport.com
Accessories and After Sales parts
Should you nd the following accessories are worn or past their user life,
replacements can be purchased online via our website https://help.tools/
If you have any queries regarding
these accessories, please call us on our
Customer Support Line: 1800 909 909.
Warranty
2400W Wet & Dry Vacuum
AFTER SALES SUPPORT
MODEL No.: MWW706S-35L-1200WC • 06/2018 • 61406 (toll free)
AFTER SALES SUPPORT
(toll free)
2400W Wet & Dry Vacuum
MODEL No.: MWW706S-35L-1200WC • 06/2018 • 61406
26 27
Troubleshooting Specications
Troubleshooting
WARNING! You must pull out the power plug from the mains outlet before
commencing any cleaning, maintenance or inspection work procedures on
the appliance. Reconnect power to the machine when safe to do so.
Mains Voltage: 220-240V ~ 50/60Hz
Vacuum Rated Power: 1200W
Maximum Power Consumption of AC
Socket Outlet: 1200W
Maximum Total Power Consumption: 2400W
Tank Capacity: 35L +/- 2%
IP Rating: IPX4
Weight (NW): 6.2kg
Product Dimensions: 67 x 34 x 34 cm
This product complies with the following standards:
Safety: AS/NZS 60335.2.2 & AS/NZS 60335.1
EMC: EN55014 +A1+A2
Technical Specications
Problem Possible Cause PossibleSolution
Suction
decreases
Blocked flexible hose (17) Gently remove obstruction using a long
stick
Blocked extension
suction tube (18)
Gently remove obstruction using a long
stick
Tank (10) has reached 2/3
full or is completed full
with waste and debris
Completely empty tank (10)
Noise of
vacuum
changes
and suction
decreases
HEPA filter (16) dirty and
clogged
Clean the HEPA filter (16) regularly by
carefully patting it and cleaning it with a
fine brush or hand brush (not supplied).
If suction continues to decreases after
cleaning the filter, replace with a new
HEPA filter.
Foam filter (19) is dirty and
clogged
Clean the foam filter (19) with a little soft
soap under running water. If suction
continues to decrease after cleaning
the filter, replace with a new foam filter.
Tank (10) has reached 2/3
full or is completed full
with waste and debris
Completely empty tank (10)
Wrong filter has been
used
Use the correct filter for the application at
hand. Follow all warnings and instructions
provided in this user manual
Appliance
will not
operate
when the
power tool
is switched
on
Incorrect ON/OFF
switch (3) mode selected
Select the Automatic Mode “II” in the
ON/OFF switch(3)
Faulty power cord or
faulty mains outlet
Plug appliance into another mains outlet.
If it doesn’t work, the power cord must be
replaced by a certified electrician using
identical replacement parts
Appliance
does not
turn on
Faulty power cord or
faulty mains outlet
Plug appliance into another mains outlet.
If it doesn’t work, the power cord must be
replaced by a certified electrician using
identical replacement parts
2400W Wet & Dry Vacuum
AFTER SALES SUPPORT
MODEL No.: MWW706S-35L-1200WC • 06/2018 • 61406 (toll free)
28
MODEL: MWW706S-35L-1200WC • 06/2018 • 61406
1800 909 909 (toll free)
e-mail: help@powertoolsupport.com
ALDI guarantees that our exclusive brand products are developed to
our stringent quality specifications. If you are not entirely satisfied with this
product, please return it to your nearest ALDI store, within 60 days from
the date of purchase, for a full refund or replacement, or take advantage of
our after sales support by calling the supplier’s Customer Service Hotline.
Made in China
WORKZONE® TITANIUM is a registered trademark of ALDI Stores
DISTRIBUTED BY:
ALDI STORES
1 SARGENTS ROAD
MINCHINBURY NSW 2770
www.aldi.com.au
This manual suits for next models
1
Table of contents
Other Workzone Vacuum Cleaner manuals
