Worx Nitro WX102.X Series User manual

20V Cordless Drill Driver WX102 WX102.X
SAFETY AND OPERATING MANUAL
ORIGINAL INSTRUCTIONS

3
20V Cordless Drill Driver EN
TABLE OF CONTENT
1. SAFETY INSTRUCTIONS
2. COMPONENT LIST
3. TECHNICAL DATA
4. INTENDED USE
5. OPERATING INSTRUCTIONS
6. PROBLEM SOLUTION
7. MAINTENANCE
SAFETY INSTRUCTIONS
PRODUCT SAFETY
GENERAL POWER TOOL
SAFETY WARNINGS
WARNING Read all safety warnings, instructions,
MPPYWXVEXMSRWERHWTIGMƼGEXMSRWTVSZMHIH[MXLXLMW
power tool. Failure to follow all instructions listed below
QE]VIWYPXMRIPIGXVMGWLSGOƼVIERHSVWIVMSYWMRNYV]
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
b) Do not operate power tools in explosive
EXQSWTLIVIWWYGLEWMRXLITVIWIRGISJƽEQQEFPI
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
G/IITGLMPHVIRERHF]WXERHIVWE[E][LMPISTIVEXMRK
a power tool. Distractions can cause you to lose
control.
2) Electrical safety
E4S[IVXSSPTPYKWQYWXQEXGLXLISYXPIX2IZIV
QSHMJ]XLITPYKMRER][E](SRSXYWIER]EHETXIV
TPYKW[MXLIEVXLIHKVSYRHIHTS[IVXSSPW
9RQSHMƼIHTPYKWERHQEXGLMRKSYXPIXW[MPPVIHYGI
risk of electric shock.
F%ZSMHFSH]GSRXEGX[MXLIEVXLIHSVKVSYRHIH
WYVJEGIWWYGLEWTMTIWVEHMEXSVWVERKIWERH
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
H(SRSXEFYWIXLIGSVH2IZIVYWIXLIGSVHJSV
GEVV]MRKTYPPMRKSVYRTPYKKMRKXLITS[IVXSSP/IIT
GSVHE[E]JVSQLIEXSMPWLEVTIHKIWSVQSZMRK
parts. Damaged or entangled cords increase the risk
of electric shock.
I;LIRSTIVEXMRKETS[IVXSSPSYXHSSVWYWIER
extension cord suitable for outdoor use. Use of a
cord suitable for outdoor use reduces the risk of
electric shock.
f) If operating a power tool in a damp location is
YREZSMHEFPIYWIEVIWMHYEPGYVVIRXHIZMGI6'(
protected supply. Use of an RCD reduces the risk of
electric shock.
3) Personal safety
E7XE]EPIVX[EXGL[LEX]SYEVIHSMRKERHYWI
GSQQSRWIRWI[LIRSTIVEXMRKETS[IVXSSP(S
RSXYWIETS[IVXSSP[LMPI]SYEVIXMVIHSVYRHIV
XLIMRƽYIRGISJHVYKWEPGSLSPSVQIHMGEXMSR A
moment of inattention while operating power tools
QE]VIWYPXMRWIVMSYWTIVWSREPMRNYV]
b) Use personal protective equipment. Always wear eye
protection. Protective equipment such as dust mask,
non-skid safety shoes, hard hat, or hearing protection
used for appropriate conditions will reduce personal
MRNYVMIW
G4VIZIRXYRMRXIRXMSREPWXEVXMRK)RWYVIXLIW[MXGL
MWMRXLISJJTSWMXMSRFIJSVIGSRRIGXMRKXSTS[IV
source and/or battery pack, picking up or carrying
XLIXSSP'EVV]MRKTS[IVXSSPW[MXL]SYVƼRKIVSRXLI
switch or energising power tools that have the switch
on invites accidents.
H6IQSZIER]EHNYWXMRKOI]SV[VIRGLFIJSVIXYVRMRK
XLITS[IVXSSPSR A wrench or a key left attached
to a rotating part of the power tool may result in
TIVWSREPMRNYV]
I(SRSXSZIVVIEGL/IITTVSTIVJSSXMRKERHFEPERGI
at all times. This enables better control of the power
tool in unexpected situations.
J(VIWWTVSTIVP](SRSX[IEVPSSWIGPSXLMRKSV
NI[IPPIV]/IIT]SYVLEMVERHGPSXLMRKE[E]JVSQ
moving parts. 0SSWIGPSXLIWNI[IPPIV]SVPSRKLEMV
can be caught in moving parts.
K-JHIZMGIWEVITVSZMHIHJSVXLIGSRRIGXMSRSJHYWX
I\XVEGXMSRERHGSPPIGXMSRJEGMPMXMIWIRWYVIXLIWIEVI
connected and properly used. Use of dust collection
can reduce dust-related hazards.
L(SRSXPIXJEQMPMEVMX]KEMRIHJVSQJVIUYIRXYWISJ
tools allow you to become complacent and ignore
tool safety principles. A careless action can cause
WIZIVIMRNYV][MXLMREJVEGXMSRSJEWIGSRH
4) Power tool use and care
E(SRSXJSVGIXLITS[IVXSSP9WIXLIGSVVIGXTS[IV
tool for your application. The correct power tool will
HSXLINSFFIXXIVERHWEJIVEXXLIVEXIJSV[LMGLMX
was designed.
F(SRSXYWIXLITS[IVXSSPMJXLIW[MXGLHSIWRSX
turn it on and off. Any power tool that cannot be
controlled with the switch is dangerous and must be
repaired.
G(MWGSRRIGXXLITPYKJVSQXLITS[IVWSYVGIERH
SVVIQSZIXLIFEXXIV]TEGOMJHIXEGLEFPIJVSQ
XLITS[IVXSSPFIJSVIQEOMRKER]EHNYWXQIRXW
GLERKMRKEGGIWWSVMIWSVWXSVMRKTS[IVXSSPW
Such preventive safety measures reduce the risk of
starting the power tool accidentally.
H7XSVIMHPITS[IVXSSPWSYXSJXLIVIEGLSJGLMPHVIR
ERHHSRSXEPPS[TIVWSRWYRJEQMPMEV[MXLXLITS[IV
XSSPSVXLIWIMRWXVYGXMSRWXSSTIVEXIXLITS[IVXSSP
Power tools are dangerous in the hands of untrained
users.

4
20V Cordless Drill Driver EN
I1EMRXEMRTS[IVXSSPWERHEGGIWWSVMIW'LIGOJSV
misalignment or binding of moving parts, breakage
SJTEVXWERHER]SXLIVGSRHMXMSRXLEXQE]EJJIGXXLI
TS[IVXSSPƅWSTIVEXMSR-JHEQEKIHLEZIXLITS[IV
tool repaired before use. Many accidents are caused
by poorly maintained power tools.
J/IITGYXXMRKXSSPWWLEVTERHGPIERProperly
maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
K9WIXLITS[IVXSSPEGGIWWSVMIWERHXSSPFMXWIXG
MREGGSVHERGI[MXLXLIWIMRWXVYGXMSRWXEOMRKMRXS
EGGSYRXXLI[SVOMRKGSRHMXMSRWERHXLI[SVOXS
be performed. Use of the power tool for operations
different from those intended could result in a
hazardous situation.
L/IITLERHPIWERHKVEWTMRKWYVJEGIWHV]GPIER
and free from oil and grease. Slippery handles and
grasping surfaces do not allow for safe handling and
control of the tool in unexpected situations.
5) Battery tool use and care
E6IGLEVKISRP][MXLXLIGLEVKIVWTIGMƼIHF]XLI
manufacturer. A charger that is suitable for one type
SJFEXXIV]TEGOQE]GVIEXIEVMWOSJƼVI[LIRYWIH
with another battery pack.
F9WITS[IVXSSPWSRP][MXLWTIGMƼGEPP]HIWMKREXIH
battery packs. Use of any other battery packs may
GVIEXIEVMWOSJMRNYV]ERHƼVI
G;LIRFEXXIV]TEGOMWRSXMRYWIOIITMXE[E]JVSQ
SXLIVQIXEPSFNIGXWPMOITETIVGPMTWGSMRWOI]W
REMPWWGVI[WSVSXLIVWQEPPQIXEPSFNIGXWXLEXGER
QEOIEGSRRIGXMSRJVSQSRIXIVQMREPXSERSXLIV
Shorting the battery terminals together may cause
FYVRWSVEƼVI
d) Under abusive conditions, liquid may be ejected
JVSQXLIFEXXIV]EZSMHGSRXEGX-JGSRXEGX
EGGMHIRXEPP]SGGYVWƽYWL[MXL[EXIV-JPMUYMH
GSRXEGXWI]IWEHHMXMSREPP]WIIOQIHMGEPLIPT
0MUYMHINIGXIHJVSQXLIFEXXIV]QE]GEYWIMVVMXEXMSR
or burns.
I (SRSXYWIEFEXXIV]TEGOSVXSSPXLEXMWHEQEKIH
SVQSHMƼIH(EQEKIHSVQSHMƼIHFEXXIVMIWQE]
I\LMFMXYRTVIHMGXEFPIFILEZMSYVVIWYPXMRKMRƼVI
I\TPSWMSRSVVMWOSJMRNYV]
J(SRSXI\TSWIEFEXXIV]TEGOSVXSSPXSƼVISV
excessive temperature. )\TSWYVIXSƼVISV
temperature above 130 °C may cause explosion.
K*SPPS[EPPGLEVKMRKMRWXVYGXMSRWERHHSRSXGLEVKI
XLIFEXXIV]TEGOSVXSSPSYXWMHIXLIXIQTIVEXYVI
VERKIWTIGMƼIHMRXLIMRWXVYGXMSRWCharging
MQTVSTIVP]SVEXXIQTIVEXYVIWSYXWMHIXLIWTIGMƼIH
range may damage the battery and increase the risk
SJƼVI
6) Service
E,EZI]SYVTS[IVXSSPWIVZMGIHF]EUYEPMƼIHVITEMV
person using only identical replacement parts.
This will ensure that the safety of the power tool is
maintained.
b) Never service damaged battery packs. Service
of battery packs should only be performed by the
manufacturer or authorized service providers.
DRILL SAFETY WARNINGS
1) Safety instructions for all operations
E ,SPHXLITS[IVXSSPF]MRWYPEXIHKVMTTMRKWYVJEGIW
[LIRTIVJSVQMRKERSTIVEXMSR[LIVIXLIGYXXMRK
EGGIWWSV]SVJEWXIRIVWQE]GSRXEGXLMHHIR[MVMRK
Cutting accessory or fasteners contacting a “live”
wire may make exposed metal parts of the power
tool “live” and could give the operator an electric
shock.
 7EJIX]MRWXVYGXMSRW[LIRYWMRKPSRKHVMPPFMXW
E 2IZIVSTIVEXIEXLMKLIVWTIIHXLERXLIQE\MQYQ
WTIIHVEXMRKSJXLIHVMPPFMX%XLMKLIVWTIIHWXLIFMX
MWPMOIP]XSFIRHMJEPPS[IHXSVSXEXIJVIIP][MXLSYX
GSRXEGXMRKXLI[SVOTMIGIVIWYPXMRKMRTIVWSREP
injury.
F %P[E]WWXEVXHVMPPMRKEXPS[WTIIHERH[MXLXLIFMX
XMTMRGSRXEGX[MXLXLI[SVOTMIGI%XLMKLIVWTIIHW
XLIFMXMWPMOIP]XSFIRHMJEPPS[IHXSVSXEXIJVIIP]
[MXLSYXGSRXEGXMRKXLI[SVOTMIGIVIWYPXMRKMR
personal injury.
G %TTP]TVIWWYVISRP]MRHMVIGXPMRI[MXLXLIFMXERHHS
not apply excessive pressure. Bits can bend causing
breakage or loss of control, resulting in personal
injury.
SAFETY WARNINGS FOR
BATTERY PACK
E (SRSXHMWQERXPISTIRSVWLVIHGIPPWSVFEXXIV]
pack.
F (SRSXWLSVXGMVGYMXEFEXXIV]TEGO(SRSXWXSVI
FEXXIV]TEGOWLETLE^EVHP]MREFS\SVHVE[IV
[LIVIXLI]QE]WLSVXGMVGYMXIEGLSXLIVSVFI
WLSVXGMVGYMXIHF]GSRHYGXMZIQEXIVMEPWWhen
battery pack is not in use, keep it away from other
QIXEPSFNIGXWPMOITETIVGPMTWGSMRWOI]WREMPW
WGVI[WSVSXLIVWQEPPQIXEPSFNIGXWXLEXGERQEOI
a connection from one terminal to another. Shorting
the battery terminals together may cause burns or a
ƼVI
G (SRSXI\TSWIFEXXIV]TEGOXSLIEXSVƼVI%ZSMH
WXSVEKIMRHMVIGXWYRPMKLX
H (SRSXWYFNIGXFEXXIV]TEGOXSQIGLERMGEPWLSGO
I -RXLIIZIRXSJFEXXIV]PIEOMRKHSRSXEPPS[XLI
PMUYMHXSGSQIMRXSGSRXEGX[MXLXLIWOMRSVI]IW-J
GSRXEGXLEWFIIRQEHI[EWLXLIEJJIGXIHEVIE[MXL
copious amounts of water and seek medical advice.
f) Seek medical advice immediately if a cell or battery
TEGOLEWFIIRW[EPPS[IH
g) Keep battery pack clean and dry.
L ;MTIXLIFEXXIV]TEGOXIVQMREPW[MXLEGPIERHV]
GPSXLMJXLI]FIGSQIHMVX]
M &EXXIV]TEGORIIHWXSFIGLEVKIHFIJSVIYWI
%P[E]WVIJIVXSXLMWMRWXVYGXMSRERHYWIXLIGSVVIGX
GLEVKMRKTVSGIHYVI
N (SRSXQEMRXEMRFEXXIV]TEGOSRGLEVKI[LIRRSXMR
use.
k) After extended periods of storage, it may be
RIGIWWEV]XSGLEVKIERHHMWGLEVKIXLIFEXXIV]TEGO

5
20V Cordless Drill Driver EN
several times to obtain maximum performance.
P &EXXIV]TEGOKMZIWMXWFIWXTIVJSVQERGI[LIRMXMW
STIVEXIHEXRSVQEPVSSQXIQTIVEXYVIq'rq'
Q ;LIRHMWTSWMRKSJFEXXIV]TEGOWOIITFEXXIV]
TEGOWSJHMJJIVIRXIPIGXVSGLIQMGEPW]WXIQW
WITEVEXIJVSQIEGLSXLIV
R 6IGLEVKISRP][MXLXLIGLEVKIVWTIGMƼIHF];36<
(SRSXYWIER]GLEVKIVSXLIVXLERXLEXWTIGMƼGEPP]
TVSZMHIHJSVYWI[MXLXLIIUYMTQIRXA charger that
is suitable for one type of battery pack may create a
VMWOSJƼVI[LIRYWIH[MXLERSXLIVFEXXIV]TEGO
S (SRSXYWIER]FEXXIV]TEGO[LMGLMWRSXHIWMKRIH
JSVYWI[MXLXLIIUYMTQIRX
T /IITFEXXIV]TEGOSYXSJXLIVIEGLSJGLMPHVIR
U 6IXEMRXLISVMKMREPTVSHYGXPMXIVEXYVIJSVJYXYVI
reference.
V 6IQSZIXLIFEXXIV]JVSQXLIIUYMTQIRX[LIRRSXMR
use.
s) Dispose of properly.
t) Do not mix cells of different manufacture, capacity,
WM^ISVX]TI[MXLMREHIZMGI
u) Do not remove battery pack from its original
packaging until required for use.
Z 3FWIVZIXLITPYWERHQMRYWƁQEVOWSRXLI
battery and ensure correct use.
[ /IITXLIFEXXIV]E[E]JVSQQMGVS[EZIWERHLMKL
pressure.
SYMBOLS
8SVIHYGIXLIVMWOSJMRNYV]YWIV
must read instruction manual
Warning
Wear ear protection
Wear eye protection
Wear dust mask
Batteries may enter water cycle if
disposed improperly, which can
be hazardous for ecosystem. Do
not dispose of waste batteries as
unsorted municipal waste.
Do not burn
Waste electrical products must
not be disposed of with household
waste. Please recycle where facili-
ties exist. Check with your local
authorities or retailer for recycling
advice.
Li-Ion Li-Ion battery This product has
been marked with a symbol relat-
ing to ‘separate collection’ for all
battery packs and battery pack. It
will then be recycled or dismantled
in order to reduce the impact on
the environment. Battery packs can
be hazardous for the environment
and for human health since they
contain hazardous substances.
Li-I on
Li-I on
Wear protective gloves.
Lock
Screw driving
Drilling
Wood
Metal

6
20V Cordless Drill Driver EN
High speed
Low speed
RCM marking
ABN: Australian Business
Number. By this number,
business information such as
entity type, status, business
location etc. can be found at
[IFWMXILXXTEFVFYWMRIWW
gov.au.
ABN of Positec Australia Pty
Limited is 14 101 682 357

32
1
4
5
6
10
9
11
7
8

100%
0%
A4
A3
1
2
3
B2
A1
1
32
B1
A2
1
2

C2
D2
D1
C1
C3 C4

F1
G
E
F2
D3

11
20V Cordless Drill Driver EN
COMPONENT LIST
1. KEYLESS CHUCK
2. TORQUE ADJUSTMENT RING
3. 8;374))(+)%6'328630
4. FORWARD/REVERSE ROTATION CONTROL
5. SOFT GRIP HANDLE
6. BATTERY PACK *
7. BATTERY PACK RELEASE BUTTON *
8. ON/OFF SWITCH
9. LED LIGHT
10. BELT HOOK
11. BIT CLIP
2SXEPPXLIEGGIWWSVMIWMPPYWXVEXIHSVHIWGVMFIHEVI
included in standard delivery.
TECHNICAL DATA
Type;<;<<HIWMKREXMSRSJQEGLMRIV]
representative of Cordless Drill)
WX102 WX102.X**
Voltage 20 V Max***
No-load speed 641
Number of clutch
positions 18+1
Max torque 60 Nm
Chuck capacity 13 mm
Max.
drilling
capacity
Steel 13 mm
Wood 40 mm
Machine weight (bare
tool) 1.1 kg
**X=1-999, A-Z, M1-M9 there are only used for different
customers, there are no safe relevant changes between
these models.
***Voltage measured without workload. Initial battery
voltage reaches maximum of 20 volts. Nominal voltage
is 18 volts.
SUGGESTED BATTERIES AND
CHARGERS
Category Model Capacity
20V Battery
WA3550 1.5Ah
WA3550.1 1.5Ah
WA3551 2.0Ah
WA3551.1 2.0Ah
WA3553 4.0Ah
20V Charger
WA3760 0.4A
WA3869 2.0A
WA3880 2.0A
We recommend that you purchase your accessories
from the same store that sold you the tool. Refer to the
accessory packaging for further details. Store personnel
can assist you and offer advice.
NOISE INFORMATION
A weighted sound pressure LPA: 83 dB (A)
KpA = 5 dB (A)
A weighted sound power LWA: 94 dB (A)
KWA = 5 dB (A)
Wear ear protectioN
VIBRATION INFORMATION
Vibration total values (triax vector sum) determined
according to EN 62841:
Drilling into metal
Vibration emission value ah,D=
QWs
9RGIVXEMRX]/!QWs
The declared vibration total value and the declared noise
emission value have been measured in accordance with
a standard test method and may be used for comparing
one tool with another.
The declared vibration total value and the declared
noise emission value may also be used in a preliminary
assessment of exposure.
WARNING: The vibration and noise emissions
during actual use of the power tool can differ from
the declared value depending on the ways in which
the tool is used especially what kind of workpiece is
processed dependant on the following examples and
other variations on how the tool is used:
How the tool is used and the materials being cut or
drilled.
The tool being in good condition and well maintained.
The use of the correct accessory for the tool and
ensuring it is sharp and in good condition.

12
20V Cordless Drill Driver EN
The tightness of the grip on the handles and if any anti
vibration and noise accessories are used.
And the tool is being used as intended by its design and
these instructions.
8LMWXSSPQE]GEYWILERHEVQZMFVEXMSRW]RHVSQIMJMXW
use is not adequately managed.
WARNING: To be accurate, an estimation of
exposure level in the actual conditions of use
should also take account of all parts of the
operating cycle such as the times when the tool is
switched off and when it is running idle but not actually
HSMRKXLINSF8LMWQE]WMKRMƼGERXP]VIHYGIXLII\TSWYVI
level over the total working period.
Helping to minimise your vibration and noise exposure
risk.
Always use sharp chisels, drills and blades.
Maintain this tool in accordance with these instructions
and keep well lubricated (where appropriate).
If the tool is to be used regularly then invest in anti
vibration and noise accessories.
Plan your work schedule to spread any high vibration tool
use across a number of days.
OPERATING INSTRUCTIONS
NOTE: Before using the tool, read the instruction
book carefully.
INTENDED USE:
The machine is intended for driving in and loosening
screws as well as for drilling in wood, metal and plastic.
ASSEMBLY AND OPERATION
ACTION FIGURE
BEFORE OPERATION
Checking the battery charge condition
NOTE: Fig. A1 only applies for the
battery pack with battery indicator light.
See Fig. A1
Removing the battery pack See Fig. A2
Charging the battery See Fig. A3
Installing the battery pack See Fig. A4
ASSEMBLY
CHUCK ADJUSTMENT
WARNING: Always lock off trigger switch and
disconnect tool from power source when
changing accessories. Always ensure the bit is secure
before starting the tool. Damage to the Chuck or a loose
FMXQE]GEYWITSWWMFPITIVWSREPMRNYV]
-- Removing the bits See Fig. B1
-- Inserting the bits See Fig. B2
-- Assembling the belt hook and bit clip See Fig. C1,
C2, C3, C4
OPERATION
*SV[EVHVIZIVWIVSXEXMSRGSRXVSP
WARNING: Never change the
direction of rotation when the
chuck is rotating, wait until it has
stopped!
See Fig. D1,
D2, D3
8;374))(+)%6'328630
WARNING: To prevent gear
damage, always allow the chuck to
come to a complete stop before
changing the direction of rotation.
See Fig. E
TORQUE ADJUSTMENT
Drilling, Screw driving
See Fig F1,
F2
3TIVEXMRKXLI3R3JJW[MXGL
WARNING: Do not operate for long
periods at low speed because
excess heat will be produced internally.
See Fig G
LED light indicator
Before operation, the LED light will be
EGXMZEXIH[LIRXLI3R3JJW[MXGLMW
slightly depressed.
WARNING: To turn on the light,
TVIWWXLI3R3JJW[MXGLERHQEOI
WYVIXLI*SV[EVH6IZIVWI6SXEXMSR
'SRXVSPMWSRVMKLXPIJXTSWMXMSR
The tool and battery are equipped with a
protection system. When the LED Light
MWUYMGOP]ƽEWLMRKWIGSRHWERHXYVR
off, the system will automatically cut off
power to the tool to extend battery life.
The tool will automatically stop during
STIVEXMSRMJXLIXSSPERHSVFEXXIV]
are placed under one of the following
conditions:
• Overloaded: The tool is operated
in a manner that causes it to draw
an abnormally high current. In this
situation, release the Trigger Switch on
the tool and stop the application that
caused the tool to become overloaded.
Then pull the Trigger Switch again to
restart.
• 3ZIVLIEXIH Under the condition
above, if the tool does not start, the
Tool and Battery are overheated. In this
situation, let the Tool and Battery cool
before pulling the Trigger Switch again.
• Low battery voltage: The remaining
Battery capacity is too low and the
tool will not operate. In this situation,
remove and recharge the Battery.
See Fig. G
PROBLEM SOLUTION
1. WHY DOES THE DRILL NOT TURN ON WHEN YOU
PRESS THE SWITCH?
8LIJSV[EVHVIZIVWIVSXEXMSRGSRXVSP[LMGLMWSRXSTSJXLI
XVMKKIVMWTSWMXMSRIHMRXLIPSGOJYRGXMSR9RPSGOXLIJSV[EVH
reverse rotation control by putting it into the required rotation
position. Push the trigger and the drill will start to rotate.
Check that the battery is charged and properly connected
to the tool.

13
20V Cordless Drill Driver EN
2. THE DRILL STOPS BEFORE THE SCREW IS
COMPLETELY TIGHTENED. WHY?
:IVMJ]XLIXSVUYITSWMXMSRSJXLIXSVUYIEHNYWXMRKVMRK*MRH
XLIXSVUYIEHNYWXMRKVMRKFIX[IIRXLIGLYGOERHXLIHVMPP
body. Position 1 is the lowest torque (screw driving force)
and position 18 is the highest torque (screw driving force).
Position MWJSVHVMPPSTIVEXMSR6IKYPEXIXLIXSVUYIEHNYWXMRK
ring to a higher position to reach the best result.
3. REASONS FOR DIFFERENT BATTERY PACK WORKING
TIMES
Charging time problems, as above, and having not used a
battery pack for a prolonged time will reduce the battery pack
working time. This can be corrected after several charge and
discharge operations by charging & working with your drill.
Heavy working conditions such as large screws into hard
wood will use up the battery pack energy faster than lighter
working conditions. Do not re-charge your battery pack below
0
o
C and above 40
o
C as this will affect performance.
MAINTENANCE
6IQSZIXLIFEXXIV]TEGOJVSQXLIXSSPFIJSVIGEVV]MRK
out any adjustment, servicing or maintenance.
Your tool requires no additional lubrication or maintenance.
There are no user serviceable parts in your power tool. Never
use water or chemical cleaners to clean your power tool.
Wipe clean with a dry cloth. Always store your power tool
in a dry place. Keep the motor ventilation slots clean. Keep
all working controls free of dust. Occasionally you may see
sparks through the ventilation slots. This is normal and will
not damage your power tool.
FOR BATTERY TOOLS
The ambient temperature range for the use and
storage of tool and battery is 00C-450C.
The recommended ambient temperature range for
the charging system during charging is 00C-400C.
ENVIRONMENTAL PROTECTION
Waste electrical products must not be disposed
of with household waste. Please recycle where
facilities exist. Check with your local authorities or
retailer for recycling advice.
Positec Australia Pty Limited
10 Corporate Blvd Bayswater , VIC 3153, Australia
DECLARATION OF
CONFORMITY
We,
Positec Germany GmbH
Postfach 32 02 16, 50796 Cologne, Germany
On behalf of Positec declare that the product
Description Cordless Drill Driver
Type ;<;<<HIWMKREXMSRSJQEGLMRIV]
representative of Cordless Drill)
Function (VMPPMRKXMKLXIRMRKERHPSSWIRMRKWGVI[WRYXW
Complies with the following Directives:
2006/42/EC
)9)9
2014/30/EU
Standards conform to
)2)2)2
)2
8LITIVWSREYXLSVM^IHXSGSQTMPIXLIXIGLRMGEPƼPI
2EQI1EVGIP*MP^
Address Positec Germany GmbH
4SWXJEGL'SPSKRI+IVQER]

Allen Ding
(ITYX]'LMIJ)RKMRIIV8IWXMRK'IVXMƼGEXMSR
Positec Technology (China) Co., Ltd
18, Dongwang Road, Suzhou Industrial
Park, Jiangsu 215123, P. R. China

DECLARATION OF
CONFORMITY
We,
Positec (UK & Ireland) Ltd
PO BOX 6242, Newbury, RG14 9LT, UK
On behalf of Positec declare that the product
Description Cordless Drill Driver
Type ;<;<<HIWMKREXMSRSJQEGLMRIV]
representative of Cordless Drill)
Function (VMPPMRKXMKLXIRMRKERHPSSWIRMRKWGVI[WRYXW
Complies with the following regulations:
7YTTP]SJ1EGLMRIV]7EJIX]6IKYPEXMSRW
Electromagnetic Compatibility Regulations 2016
8LI6IWXVMGXMSRSJXLI9WISJ'IVXEMR,E^EVHSYW
Substances in Electrical and Electronic Equipment
Regulations
Standards conform to
&7)2&7)2&7)2&7)2

8LITIVWSREYXLSVM^IHXSGSQTMPIXLIXIGLRMGEPƼPI
Name Jim Kirkwood
%HHVIWW4SWMXIG9/-VIPERH0XH
PO BOX 6242, Newbury, RG14 9LT, UK

Allen Ding
(ITYX]'LMIJ)RKMRIIV8IWXMRK'IVXMƼGEXMSR
Positec Technology (China) Co., Ltd
18, Dongwang Road, Suzhou Industrial
Park, Jiangsu 215123, P. R. China

Copyright © 2022, Positec. All Rights Reserved.
AR01520002
www.worx.com
%JXIVWEPIW7IVZMGIERH%TTPMGEXMSR
At www.worx.com you can order spare parts or arrange the
collection of a product in need of servicing or repair.
Tel. Service: 0345 202 9679
E-Mail: [email protected]