Worx Professional WU279 User manual

Lithium-Ion Brushless Impact Wrench
טקפמיא םיגרב חתפמ תשרבמ אלל ןוי םויתיל
WU279 WU279.1 WU279.9


3
2
6
7
5
3
4
1
8

4
2
1
100%
0%
A2
A1
A4
B2
B1
A1
A3

5
HL
A
STOP
D1C
D2
F
E

6
PRODUCT SAFETY
GENERAL POWER TOOL
SAFETY WARNINGS
WARNING Read all safety warnings,
instructions, illustrations and specifications
provided with this power tool. Failure to follow
all instructions listed below may result in electric
shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term “power tool” in the warnings refers to
your mains-operated (corded) power tool or battery-
operated (cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit. Cluttered
or dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power
tools create sparks which may ignite the dust or
fumes.
c) Keep children and bystanders away while
operating a power tool. Distractions can
cause you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet.
Never modify the plug in any way. Do
not use any adapter plugs with earthed
(grounded) power tools. Unmodified plugs
and matching outlets will reduce risk of electric
shock.
b) Avoid body contact with earthed or
grounded surfaces, such as pipes, radiators,
ranges and refrigerators. There is an increased
risk of electric shock if your body is earthed or
grounded.
c) Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord
for carrying, pulling or unplugging the
power tool. Keep cord away from heat, oil,
sharp edges or moving parts. Damaged or
entangled cords increase the risk of electric
shock.
e) When operating a power tool outdoors, use
an extension cord suitable for outdoor use.
Use of a cord suitable for outdoor use reduces
the risk of electric shock.
f) If operating a power tool in a damp location
is unavoidable, use a residual current device
(RCD) protected supply. Use of an RCD
reduces the risk of electric shock.
3) Personal safety
a) Stay alert, watch what you are doing and
use common sense when operating a power
tool. Do not use a power tool while you are
tired or under the influence of drugs, alcohol
or medication. A moment of inattention while
operating power tools may result in serious
personal injury.
b) Use personal protective equipment. Always
wear eye protection. Protective equipment
such as dust mask, non-skid safety shoes, hard
hat, or hearing protection used for appropriate
conditions will reduce personal injuries.
c) Prevent unintentional starting. Ensure
the switch is in the off-position before
connecting to power source and/or battery
pack, picking up or carrying the tool. Carrying
power tools with your finger on the switch or
energising power tools that have the switch on
invites accidents.
d) Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key
left attached to a rotating part of the power tool
may result in personal injury.
e) Do not overreach. Keep proper footing
and balance at all times. This enables better
control of the power tool in unexpected
situations.
f) Dress properly. Do not wear loose clothing
or jewellery. Keep your hair, clothing and
gloves away from moving parts. Loose
clothes, jewellery or long hair can be caught in
moving parts.
g) If devices are provided for the connection
of dust extraction and collection facilities,
ensure these are connected and properly
used. Use of dust collection can reduce dust-
related hazards.
h) Do not let familiarity gained from frequent
use of tools allow you to become
complacent and ignore tool safety principles.
A careless action can cause severe injury within
a fraction of a second.
4) Power tool use and care
a) Do not force the power tool. Use the correct
power tool for your application. The correct
power tool will do the job better and safer at the
rate for which it was designed.
b) Do not use the power tool if the switch
does not turn it on and off. Any power tool

7
that cannot be controlled with the switch is
dangerous and must be repaired.
c) Disconnect the plug from the power source
and/or the battery pack from the power tool
before making any adjustments, changing
accessories, or storing power tools. Such
preventive safety measures reduce the risk of
starting the power tool accidentally.
d) Store idle power tools out of the reach of
children and do not allow persons unfamiliar
with the power tool or these instructions
to operate the power tool. Power tools are
dangerous in the hands of untrained users.
e) Maintain power tools. Check for
misalignment or binding of moving parts,
breakage of parts and any other condition
that may affect the power tool’s operation.
If damaged, have the power tool repaired
before use. Many accidents are caused by
poorly maintained power tools.
f) Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to
control.
g) Use the power tool, accessories and tool bits
etc. in accordance with these instructions,
taking into account the working conditions
and the work to be performed. Use of the
power tool for operations different from those
intended could result in a hazardous situation.
h) Keep handles and grasping surfaces dry,
clean and free from oil and grease. Slippery
handles and grasping surfaces do not allow
for safe handling and control of the tool in
unexpected situations.
5) Battery tool use and care
a) Recharge only with the charger specified by
the manufacturer. A charger that is suitable for
one type of battery pack may create a risk of fire
when used with another battery pack.
b) Use power tools only with specifically
designated battery packs. Use of any other
battery packs may create a risk of injury and fire.
c) When battery pack is not in use, keep it away
from other metal objects, like paper clips,
coins, keys, nails, screws or other small
metal objects, that can make a connection
from one terminal to another. Shorting the
battery terminals together may cause burns or
a fire.
d) Under abusive conditions, liquid may be
ejected from the battery; avoid contact. If
contact accidentally occurs, flush with water.
If liquid contacts eyes, additionally seek
medical help. Liquid ejected from the battery
may cause irritation or burns.
e) Do not use a battery pack or tool that is
damaged or modified. Damaged or modified
batteries may exhibit unpredictable behaviour
resulting in fire, explosion or risk of injury.
f) Do not expose a battery pack or tool to fire
or excessive temperature. Exposure to fire or
temperature above 130 °C may cause explosion.
g) Follow all charging instructions and do
not charge the battery pack or tool outside
the temperature range specified in the
instructions. Charging improperly or at
temperatures outside the specified range may
damage the battery and increase the risk of fire.
6) Service
a) Have your power tool serviced by a
qualified repair person using only identical
replacement parts. This will ensure that the
safety of the power tool is maintained.
b) Never service damaged battery packs.
Service of battery packs should only be
performed by the manufacturer or authorized
service providers.
IMPACT WRENCH
SAFETY WARNING
1. Hold power tool by insulated gripping
surfaces, when performing an operation
where the fastener may contact hidden
wiring. Fasteners contacting a “live” wire
may make exposed metal parts of the power
tool “live” and could give the operator an
electric shock.
SAFETY WARNINGS FOR
BATTERY PACK
a) Do not dismantle, open or shred cells or
battery pack.
b) Do not short-circuit a battery pack. Do not
store battery packs haphazardly in a box or
drawer where they may short-circuit each
other or be short-circuited by conductive
materials. When battery pack is not in use,
keep it away from other metal objects, like
paper clips, coins, keys, nails, screws or other
small metal objects, that can make a connection
from one terminal to another. Shorting the

8
battery terminals together may cause burns or a
fire.
c) Do not expose battery pack to heat or fire.
Avoid storage in direct sunlight.
d) Do not subject battery pack to mechanical
shock.
e) In the event of battery leaking, do not allow
the liquid to come into contact with the skin
or eyes. If contact has been made, wash the
affected area with copious amounts of water
and seek medical advice.
f) Seek medical advice immediately if a cell or
battery pack has been swallowed.
g) Keep battery pack clean and dry.
h) Wipe the battery pack terminals with a clean
dry cloth if they become dirty.
i) Battery pack needs to be charged before use.
Always refer to this instruction and use the
correct charging procedure.
j) Do not maintain battery pack on charge
when not in use.
k) After extended periods of storage, it may
be necessary to charge and discharge
the battery pack several times to obtain
maximum performance.
l) Battery pack gives its best performance
when it is operated at normal room
temperature (20 °C ± 5 °C).
m) When disposing of battery packs, keep
battery packs of different electrochemical
systems separate from each other.
n) Recharge only with the charger specified by
WORX. Do not use any charger other than
that specifically provided for use with the
equipment. A charger that is suitable for one
type of battery pack may create a risk of fire
when used with another battery pack.
o) Do not use any battery pack which is not
designed for use with the equipment.
p) Keep battery pack out of the reach of
children.
q) Retain the original product literature for
future reference.
r) Remove the battery from the equipment
when not in use.
s) Dispose of properly.
t) Do not mix cells of different manufacture,
capacity, size or type within a device.
u) Do not remove battery pack from its original
packaging until required for use.
v) Observe the plus (+) and minus (–) marks on
the battery and ensure correct use.
SYMBOL
To reduce the risk of injury,
user must read instruction
manual
Wear ear protection
Wear eye protection
Wear dust mask
Do not burn
Do not expose to rain or water
Warning
Wear protective gloves.
Li-Ion
Li-Ion
Do not dispose of batteries, Return
exhausted batteries to your local
collection or recycling point.

9
COMPONENT LIST
1. FORWARD/REVERSE ROTATION SWITCH
2. BATTERY PACK *
3. BATTERY PACK RELEASE BUTTON *
4. SPEED ADJUSTMENT BUTTON
5. ON/OFF SWITCH
6. LED LIGHT
7. COLLET LOCKING SLEEVE
8. BATTERY INDICATOR
*Not all the accessories illustrated or described are included in standard delivery.
TECHNICAL DATA
Type designation WU279 WU279.1 WU279.9 (2 - designation of machinery, represen-
tative of impact wrench)
WU279 WU279.1 WU279.9
Voltage 20 V Max**
No-load speed 0-2600/2900/min
Impact rate 0-3300/3800bpm
Max torque 360N.m
Chuck Size 1/2” (12.7mm)
Machine weight 1.7kg 1.1kg
Battery capacity 4.0Ah /
**Voltage measured without workload. Initial battery voltage reaches maximum of 20 volts. Nominal
voltage is 18 volts.
ACCESSORIES
WU279 WU279.1 WU279.9
Battery pack 2 (WA3016) 2 (WA3016) /
Charger 1 (WA3924) 1 (WA3922) /
M22 socket 1 1 /
Belt 111
Parallel pin 1 1 /
O-shaped ring 1 1 /
We recommend that you purchase your accessories listed in the above list from the same store that
sold you the tool. Refer to the accessory packaging for further details. Store personnel can assist you
and offer advice.

10
OPERATING
INSTRUCTIONS
NOTE: Before using the tool, read the
instruction book carefully.
ASSEMBLY AND OPERATION
ACTION FIGURE
BEFORE OPERATION
Checking the battery condition See Fig. A1
Removing the Battery Pack See Fig. A2
Charging the Battery See Fig. A3
Installing the Battery Pack See Fig. A4
ASSEMBLY
Inserting and Removing Socket See Fig. B1,B2
OPERATON
Forward And Reverse Rotation
Control
WARNING: Never ChangeThe
Direction Of RotationWhen
The Chuck Is Rotating,Wait Until
It Has Stopped!
See Fig.
C,D1,D2
Variable Speed Control
A-STOP : Stop reverse rotation
automatically.
H : High torque, high efficiency.
L : Low torque, long runtime.
-When the tool is on forward
rotation switch, the speed
adjustment button is defaulted on
L gear. Press the speed adjustment
button, so L gear can be changed
to H gear.
-When the tool is on reverse rotation
switch, the speed adjustment
button is defaulted on A-stop gear.
Press the speed adjustment button
can shut down the A-STOP, so
the reverse rotation will not stop
automatically.
See Fig. E
Operating the On/Off Switch
WARNING: Do not operate
for long periods at low speed
because excess heat will be
produced internally.
See Fig. F
Using The LED Light
Before operation, the LED light
will be activated when the On/Off
switch is slightly depressed, and will
automatically turn off 20 seconds
after the On/Off switch is released.
The tool and battery are equipped
with a protection system. When
the LED Light is quickly flashing 3
seconds and turn off, the system
will automatically cut off power
to the tool to extend battery life.
The tool will automatically stop
during operation if the tool and/or
battery are placed under one of the
following conditions:
• Overloaded: The tool is operated
in a manner that causes it to draw
an abnormally high current. In this
situation, release the Trigger Switch
on the tool and stop the application
that caused the tool to become
overloaded. Then pull the Trigger
Switch again to restart.
• Overheated: Under the condition
above, if the tool does not start, the
Tool and Battery are overheated.
In this situation, let the Tool and
Battery cool before pulling the
Trigger Switch again.
• Low battery voltage: The
remaining Battery capacity is too
low and the tool will not operate. In
this situation, remove and recharge
the Battery.
WARNING:
To turn on the light, press the
On/Off switch and make sure the
Forward/Reverse Rotation Control is
on right/left position.
See Fig. F
TROUBLE SHOOTING
1.I CAN NOT FITTHE BATTERY INTOTHE BAT-
TERY CHARGER.WHY?
The battery can be inserted into the charger only
in one direction. Turn the battery around until it
can be inserted into the slot, the red LED Light
should turn on when the battery is charging.
2.REASONS FOR DIFFERENT BATTERY PACK
WORKINGTIMES
Charging time problems, as above, and having
not used a Battery Pack for a prolonged time will
reduce the Battery Pack working time. This can
be corrected after several charge and discharge
operations by charging & working with your drill.
Heavy working conditions such as large screws
into hard wood will use up the Battery Pack
energy faster than lighter working conditions. Do

11
not re-charge your Battery Pack below 0oC and
above 30oC as this will affect performance.
MAINTENANCE
Remove the battery pack from the machine
before carrying out any adjustment, servicing
or maintenance.
Your power tool requires no additional lubrication
or maintenance. There are no user serviceable
parts in your power tool. Never use water or
chemical cleaners to clean your power tool. Wipe
clean with a dry cloth. Always store your power
tool in a dry place. Keep the motor ventilation
slots clean. Keep all working controls free of dust.
Occasionally you may see sparks through the ven-
tilation slots. This is normal and will not damage
your power tool.
We recommend that you purchase your acces-
sories from the same store that sold you the
tool. Refer to the accessory packaging for further
details. Store personnel can assist you and offer
advice.
FOR BATTERY TOOLS
The ambient temperature range for the use and
storage of tool and battery is 0°C-45°C.
The recommended ambient temperature range
for the charging system during charging is 0°C-
40°C.
ENVIRONMENTAL
PROTECTION
Disposal
The machine, its accessories and packaging
materials should be sorted for environmentally
friendly recycling.
The plastic components are labeled for categorized
recycling.

HE
6
הקוזחת
אתה עוציב ינפל רישכמהמ תוללוסה תכרע תא אצוה־
הקוזחת וא םינוקית ,תומ.
.
.
הללוס ילכ רובע
45 0.
40 0.
תיתביבס הנגה
ןשי רישכמ קוליס
מ”עב סיסקל םוקימס :הרבחה םש
הדוהי ןבא 9090 .ד.ת המידק יברעמ ת”א :תבותכ
09-7611222 :ןופלט
www.semicom.co.il

HE
5
הלעפה תוארוה
:הרעה
שומישה דועיי
רויא הלועפ
רישכמב שומישה ינפל
A1
A3
A4
הבכרה
הלעפה
הרהזא:
ןוויכ תא תונשל תוסנל ןיא
.תבבותסמ תינספתהש ןמזב בוביסה
האלמ הריצעל דע וניתמה
הנתשמ תוריהמ תרקב
.
:H.
:L.
L.
L
H.
.
ןמז הגרבמה תא ליעפהל ןיא :הרעה
םרוג רבדה .הכומנ תוריהמב ךשוממ
םיימינפה םיביכרה תוממחתהל
דלה תרואתב שומיש
LED
LED
LED
רתי סמוע •
רתי תוממחתה •
השלח הללוס •
•
הרהזא
תויעב ןורתפ
?ןעטמל הללוסה תא סינכהל חילצמ אל ינא עודמ.1
?הללוסה תדובע ינמזב ינוש ישי עודמ2.
0°C 30°C .

HE
4
הגרבמה יקלח
)הרוחא / המידק( בוביסה ןוויכ ררוב גתמ .1
* ה ל ל ו ס . 2
* הללוסה רורחש ספת .3
תוריהמ ןונווכ ןצחל .4
יוביכ/הלעפה קדה .5
LED תירונ .6
טיבה תליענ לוורש .7
הללוסה בצמ יוויח .8
)דרפנב השיכר( םיילנויצפוא םה תרבוחב םיראותמה/םיגצומה םירזיבאהמ קלח *
ינכט טרפמ
)םיגרב חתפמ גיצנ ,תונוכמ לש דועיי - 2( גוס דועיי
WU279.9 WU279.1 WU279
1.1
4.0Ah
18V אוה ילנימונה חתמה .20V םומיסקמל עיגמ ינושארה הללוסה חתמ .סמוע אלל דדמנ חתמ *
םירזיבא
WU279.9 WU279.1 WU279
1 1
111
1 1
1 1

HE
3
.דויצה
לש םדי גשיהמ תוללוסה זראמ תא קיחרהל שי )זט
.םידלי
.דיתעב ןויעל םיירוקמה רצומה יכמסמ תא רומשל שי )זי
.שומישב וניא רשאכ דויצהמ הללוסה תא איצוהל שי )חי
.הכלהכ ךילשהל שי )טי
גוס וא לדוג ,תלוביק ,רוציי לש תוללוס בברעל ןיא )כ
.ןקתהב םינוש
דע תירוקמה ותזיראהמ תוללוסה זראמ תא ריסת לא )אכ
.שרדייש
הללוסה לע )-( סונימו )+( סולפ םינמיסל בל םיש )בכ
.ןוכנ שומיש חיטבהל ידכ
םילמס
n
n

HE
2
ךותיח ילכ .םייקנו םידח ךותיח ילכ לע ורמש .ו
תוחפ םיטונ םידח ךותיח תווצק םע יוארכ םיקזחותמ
.הטילשל רתוי םילקו ףפוכתהל
םיטיבב םירזיבאב ,ילמשחה הדובעה ילכב ושמתשה .ז
יאנתב תובשחתה ךות ,הלא תוארוהל םאתהב 'דכו
עוציבל הדובעה תוהמבו הדובעה
,םישבי הזיחאה יחטשמ לעו תוידיה לע רומשל שי .ח
זירג וא ןמש אללו םייקנ
ותקוזחתו הללוס לעפומ הדובע ילכב שומיש5(
.דבלב ןרציה י"ע קפוסמה ןעטמה תועצמאב ונעט .א
ול תודעוימה תוללוס םע הדובעה ילכב ושמתשה .ב
.דבלב
םיצפחמ ,שומישב הניאשכ ,הללוסה תא וקיחרה .ג
,תוחתפמ ,תועבטמ ,ריינ יבטא ןוגכ םירחא םייתכתמ
,םירחא םינטק םייתכתמ םיצפח וא םיגרב ,םירמסמ
הללוסה יבטוק ינש ןיב עגמ רוציל םילולעה
ףולדל לולע הללוסה לזונ םיינוציק שומיש יאנתב .ד
לש הרקמב םימב דימ ופטש .עגממ וענמיה ;הנממ
הרקמב יאופר עויס תלבקל ונפ ,ףסונב .גגושב עגמ
.םייניעה םע עגמ לש
וא םגפנש ילכב וא תוללוס זראמב שמתשהל ןיא .ה
.םייוניש רבעש
הרוטרפמטל וא שאל ילכ וא תוללוס זראמ ףושחל ןיא .ו
130°C.הגירח
תא ןועטל ןיא .הניעטה תוארוה לכ לע דיפקהל שי .ז
תגרוחה הרוטרפמטב ילכה וא תוללוסה זראמ
.תוארוהב ןיוצמה חווטהמ
תוריש6(
י"ע ןתניהל ילמשחה הדובעה ילכל תורישה לע .א
רבד .םיירוקמ ףוליח יקלחב שמתשמה ךמסומ יאנכט
.רמשית ילמשחה הדובעה ילכ תוחיטבש חיטבי הז
.םימוגפ תוללוס יזראמ ןקתל תוסנל ןיא .ב
רבמ/החדקמל תוחיטב תארוה־
תנעטנ תיטוחלא הג
הזיחאה יחטשמב ילמשחה הדובעה ילכב וזחא .1
עוציב תעב דבלב םידדובמה
טוויח םע עגמב אובל לולע רזיבאה הב דוביע תלועפ
.רתסנ
הללוסל תוחיטב תוארוה
זראמ וא תוללוסה תא סורגל וא חותפל ,קרפל ןיא )א
.תוללוסה
יזראמ ןסחאל ןיא .תוללוסה זראמ תא רצקל ןיא )ב
םה הבש הריגמב וא הספוקב ןכוסמ ןפואב תוללוס
םילולע םיכילומ םירמוחש וא הז תא הז רצקל םילולע
.םתוא רצקל
ענמיה .שאל וא םוחל תוללוסה זראמ תא ףושחל ןיא )ג
.רישי שמש רואל ףושח םוקמב ןוסחאמ
.תוללוסה זראמב תיזיפ העיגפ עונמל שי )ד
לש עגמ רשפאל ןיא ,הללוס תפילד לש הרקמב )ה
שי ,עגמ לש הרקמב .םייניעה וא רועה םע םילזונה
םימ לש תולודג תויומכב עוגנה רוזאה תא ףוטשל
.יאופר לופיטל תונפלו
תעילב לש הרקמב יאופר לופיטל דימ תונפל שי )ו
.תוללוס זראמ וא הללוס
.שביו יקנ תוללוסה זראמ תא רומשל שי )ז
םתוקנל שי ,םיכלכלתמ תוללוסה זראמ יקדה םא )ח
.הייקנו השבי תילטמב
שי .שומישה ינפל תוללוסה זראמ תא ןועטל שי )ט
ךילהב שמתשהלו הלא תוארוה לע דימת דיפקהל
.ןוכנה הניעטה
וניא רשאכ הניעטב תוללוסה זראמ תא ריאשהל ןיא )י
.שומישב
היהיש ןכתיי ,ןוסחא לש תוכשוממ תופוקת רחאל )אי
םימעפ המכ תוללוסה זראמ תא קורפלו ןועטל ךרוצ
.םייברמ םיעוציב תגשהל
אוה רשאכ םייבטימ םיעוציב קפסמ תוללוסה זראמ )בי
.)20°C ± 5°C( הליגרה רדחה תרוטרפמטב לעופ
הזמ הז דירפהל שי ,תוללוס יזראמ לש הכלשה תעב )גי
תוימיכ-ורטקלא תוטישב םילעופה תוללוס יזראמ
.תונוש
ידי-לע ןיוצמה ןעטמה תועצמאב קר שדחמ ןועטל שי )די
ןעטמה דבלמ ןעטמ םושב שמתשהל ןיא .WORX
.דויצה םע שומישל דחוימב קפוסמה
םע שומישל דעונ אלש תוללוס זראמב שמתשהל ןיא )וט

HE
1
רצומה תוחיטב
ילכל תויללכ תוחיטב תוארוה
םיילמשח הדובע
,תוחיטבה תורהזא לכ תא אורקל שי :הרהזא
ילכל םיפרוצמה םיטרפמהו םירויאה ,תוארוהה
.העיצפ וא/ו הקילד ,תולמשחתה תעינמל .הז הדובע
.דיתעב ןויעל ,חוטב םוקמב תרבוחה תא ורמש
הדובעה רוזאב תוחיטב1
בטיה ראומו יקנ הדובע רוזא לע ורמש .א
,תוציפנ תוביבסב םיילמשח הדובע ילכ וליעפת לא .ב
.קבא וא םיזג ,םיקילד םילזונ תברקב ןוגכ
ילכ תלעפה תעב םירחא םישנאו םידלי וקיחרה .ג
ילמשח הדובע
תילמשח תוחיטב2(
םיעקשל םיאתהל םיילמשחה הדובעה ילכ יעקת לע .א
הרוצ לכב עקתה תא ונשת לא םלועל .םיילמשחה
םהשלכ םיעקת ימאתמב ושמתשת לא .איהש
.םיקראומ םיילמשח הדובע ילכ רוביחל
ןוגכ ,םיקראומ םיחטשמ םע עגממ וענמיה .ב
.םיררקמו לושיב ירונת ,םירוטאידר ,תורוניצ
וא םשגל םיילמשחה הדובעה ילכ תא ופשחת לא .ג
.תוחלל
ושמתשת לא םלועל .הניזה לבכ לע חוכ וליעפת לא .ד
.ילמשחה עקשהמ וקותינל וא ילכה תאישנל לבכב
וא םידח תווצקמ ,ןמשמ ,םוחמ לבכה תא וקיחרה
.םיענ םיקלחמ
ץוחמ שומישל םיאתמה ךיראמ לבכב ושמתשה .ה
ץוחמ ילמשח הדובע ילכ תלעפה תעב הנבמל
.הנבמל
תלעפהמ ענמיהל ןתינ אלשכ תחפ קספמב ושמתשה .ו
.החל הביבסב ילמשח הדובע ילכ
תישיא תוחיטב3(
ןויגיהב וגהנו םישוע םתאש המל בל ומיש ,םירע ויה .א
ילכב ושמתשת לא .ילמשח הדובע ילכ תלעפה תעב
תעפשה תחת וא םיפייע םתאשכ ילמשח הדובע
.תופורת וא לוהוכלא ,םירודכ
.ןגמ יפקשמ דימת ושבל .ישיא ןגמ דויצב ושמתשה .ב
בצמב גתמהש ואדו .היופצ יתלב הלעפה וענמ .ג
,הללוס וא/ו חתמ רוקמל ילכה רוביח ינפל יובכ
.ותאישנ וא ילכה תמרה
ינפל םיגרב תוחתפמ וא ןונווכ תוחתפמ וריסה .ד
.ילמשחה הדובעה ילכ תלעפה
.םיקחורמ תומוקמל עיגהל תנמ לע וחתמתת לא .ה
.הביצי הדימע לע דימת ורמש
וא םייופר םידגב ושבלת לא .םאתהב ושבלתה .ו
םידגבהו רעישה ןיב קחרמ לע דיפקהל שי .םיטישכת
.םיענ םיקלח ןיבל
אדוול שי קבא באוש רוביחל םימאתמ םיקפוסמשכ .ז
.יוארכ םהב םישמתשמו בטיה םירבוחמ םהש
ףוכת שומיש בקע תורכיה ובש בצממ ענמיהל שי .ח
תונורקעמ תומלעתהלו תוננאשל ליבות םילכב
.םילכה לש תוחיטבה
הקוזחתו שומיש4(
ושמתשה .ילמשחה הדובעה ילכ לע חוכ וליעפת לא .א
.המישמל םיאתמה ילמשחה הדובעה ילכב
וניא גתמה םא ילמשחה הדובעה ילכב ושמתשת לא .ב
.ותוא הבכמ וא ליעפמ
תא ואיצוה וא/ו חתמה רוקממ עקתה תא וקתנ .ג
םינוויכ עוציב ינפל ילמשחה הדובעה ילכמ הללוסה
.ןוסחא וא םירזיבא תפלחה ,םהשלכ
קחרה שומישב םניאש םיילמשח הדובע ילכ ונסחא .ד
םניאש םישנאל ורשפאת לאו םידלי לש םדי גשיהמ
תוארוהב וא ילמשחה הדובעה ילכ תלעפהב םיאיקב
.ותוא ליעפהל הלא
רחא וקדב .םיניקת םיילמשח הדובע ילכ לע ורמש .ה
לכו םירובש םיקלח ,םיפפוכמ וא םימוקע םיענ םיקלח
הדובעה ילכ תלועפ לע עיפשהל לולעה רחא יאנת
ינפל םוגפ ילמשח הדובע ילכ ןוקיתל וגאד .ילמשחה
.וב שומישה



Copyright © 2020, Positec. All Rights Reserved.
AR01456502
www.worx.com
This manual suits for next models
2
Table of contents
Languages:
Other Worx Professional Impact Driver manuals
Popular Impact Driver manuals by other brands

Makita
Makita BTD040 instruction manual

Paoli Avvitatori
Paoli Avvitatori DP 36 Operating and maintenance manual

Milwaukee
Milwaukee 9060 Service parts list

Schneider Airsystems
Schneider Airsystems SGS 430 Original operating manual

Bauer
Bauer 1981C-B Owner's manual & safety instructions

Parkside Performance
Parkside Performance PSBSAP 20-Li C3 Translation of the original instructions