Wren Kitchens WKIN00225 Assembly instructions
For Internal Use: WKIN00225_Shelf_BRACKET_Rev1
SHELVES
Shelf Bracket Fitting Guide
600mm - 1000mm Shelves 2 Brackets
1200mm - 1800mm Shelves 3 Brackets
2000mm - 2400mm Shelves 4 Brackets
Page 2
SHELVES
Shelf Bracket Fitting Guide
Step 1.
Appropriately measure and attach brackets part A to the
wall.
60mm to 100mm overhang is recommended on the end
brackets.
Step 2.
Attach brackets part B to brackets part A using the hex
head bolts provided.
Do not fully tighten bolt, leave a gap slightly bigger
than the thickness of your shelf material.
Screws for attaching to walls are not provided as these vary depending on materials, thickness
and construction. Ensure appropriate xings for wall construction are used.
Hex Head
bolt
Components:
Tools Required:
Bracket
Part A
Bracket
Part B
Shelf
Protectors
Page 3For Internal Use: WKIN00225_Shelf_BRACKET_Rev1
Step 3.
Attach shelf protectors to brackets part A & B
Step 4.
Insert shelf fully into each bracket.
Step 5.
Position shelf and evenly space overhang on
the end 2 brackets.
Hand tighten the bolt to lock the shelf into
position. Repeat on all brackets.
