Wright Manufacturing Stander T User manual

1
Instruction Manual
Wright Manufacturing
4600X Wedgewood Blvd
Frederick, Md 21703
Stander Intensity serial # 69788 and higher
P/N 79510001
WARNING: READ THIS MANUAL BEFORE USING
For your safety and for proper operation and maintenance read
carefully and keep readily available for future reference.
10/2013

2
Foreword
Welcome to the progressive group of mowing professionals who use Wright mowers. We are focused on
giving you advanced engineering and quality construction in each mower we build.
This manual explains the features and promotes safer use of the mower. Please read it in its entirety and
follow the instructions carefully so that you can have many years of safe and productive operation with your
Wright product. This manual contains information pertaining to European models also. All information
referencing “CE” only applies to European units.
For service, remember that your Wright dealer knows your mower best and is interested in your satisfaction.
Your dealer can provide you with quality maintenance and other assistance that you may need.
Please provide this manual to anyone who may operate the mower for them to study before operation.
Additionally, make the manual and service documents available to anyone to whom you may sell the mower
in the future. It is important that the next owner receive this information also.
As Wright Manufacturing, Inc. is constantly seeking ways to improve its products, the mower you have may
differ slightly from the information and specifications in this manual. Wright reserves the option to make
changes at any time without notice, in the process of continually improving our products.
Wright Manufacturing, Inc.
SAFETY ALERT
This is the safety alert symbol. It is used throughout this manual and on the mower’s safety
labels to alert you to potential personal injury hazards. Obey all safety messages that
follow this symbol to avoid possible injury or death. Read these instructions carefully. It is
essential that you read the instructions and safety precautions before you attempt to work
on or use this unit.
WARNING
This symbol with the “WARNING” indicates a potentially hazardous situation which, if not
avoided, could result in death or serious injury.
CAUTION
This symbol with the word “CAUTION” indicates a potentially hazardous situation which, if
not avoided, may result in minor or moderate injury.
1998-2013 Wright Manufacturing, Inc. All rights reserved. This material may not be reproduced or copied, in whole or part,
without written permission from Wright Manufacturing, Inc. Grass Gobbler, Gobbler, Leaf Gobbler, Velke, Pro 1, X2, Stander, and
Sentar are trademarks of Wright Manufacturing, Inc.

3
TABLE OF CONTENTS
PRE-DELIVERY SERVICE OF MOWER BY DEALER.............................................................................................5
1INTRODUCTION...........................................................................................................................................................7
1.1 TECHNICAL DATA....................................................................................................................................................7
1.2 GENERAL SAFETY INSTRUCTIONS ............................................................................................................................8
1.2.1 DO'S AND DON'TS ................................................................................................................................................8
1.2.2 WARNINGS ..........................................................................................................................................................8
1.3 IMPORTANT INFORMATION .......................................................................................................................................8
1.4 OWNER/USER NOTICE ............................................................................................................................................9
1.5 SAFETY FOR OPERATION.........................................................................................................................................9
1.6 USER QUALIFICATIONS............................................................................................................................................9
1.7 USER CLOTHING.....................................................................................................................................................9
1.8 INSPECT MOWER BEFORE EACH USE.......................................................................................................................9
1.9 REGULAR MOWER SAFETY................................................................................................................................... 10
1.10 PREVENT FIRES................................................................................................................................................. 10
1.11WORK AREA CONDITIONS &INSPECTION............................................................................................................. 10
1.12 INITIAL OPERATING SAFETY GUIDELINES............................................................................................................. 10
1.13 SAFETY FOR MAINTENANCE................................................................................................................................ 11
1.14 OPERATION IN FORWARD DIRECTION.................................................................................................................. 11
1.15 OPERATION IN REVERSE .................................................................................................................................... 12
1.16 ZERO-RADIUS TURN OPERATION........................................................................................................................ 12
1.17 OPERATION ON SLOPES ..................................................................................................................................... 12
1.18 FUEL SAFETY..................................................................................................................................................... 13
1.19 USING A SPARK ARRESTER ................................................................................................................................ 13
1.20 RESPONSIBLY HANDLING WASTE PRODUCT AND CHEMICALS............................................................................... 13
1.21HYDRAULIC SAFETY ........................................................................................................................................... 13
1.22REPLACEMENT PARTS........................................................................................................................................ 13
2 WARNINGS, SAFETY AND INSTRUCTIONAL DECALS.................................................................................. 14
3 SPECIFICATIONS ............................................................................................................................................... 15
4 MACHINE DESCRIPTION & OVERVIEW........................................................................................................... 17
4.1 OPERATOR'S AREA.............................................................................................................................................. 18
4.2 MODEL AND SERIAL LOCATION............................................................................................................................. 18
4.3 CONTROL PANEL & STEERING CONTROL LEVERS................................................................................................. 19
4.4 DIGITAL HOUR METER ......................................................................................................................................... 19
4.5 FUEL SYSTEM / SHUT-OFF VALVE ........................................................................................................................ 19
4.6 DECK LIFT LEVER................................................................................................................................................ 20
4.7 SAFETY INTERLOCK SYSTEM................................................................................................................................ 20
5 OPERATING INSTRUCTIONS............................................................................................................................ 21
5.1 INSPECTION OF MOWER BEFORE EACH USE......................................................................................................... 21
5.2 HOW TO START THE MOWER ................................................................................................................................. 21
5.3 HOW TO DRIVE THE MOWER.................................................................................................................................. 21
5.4 HOW TO STOP AND PARK THE MOWER.................................................................................................................. 22
5.5 DRIVING THE MOWER OVER A CURB..................................................................................................................... 22
5.5.1 NEVER DRIVE STRAIGHT ONTO OR OFF A CURB ................................................................................................. 23
5.6 MOWING ON VARYING TERRAIN ............................................................................................................................ 23
5.7 HOW TO ADJUST NEUTRAL ................................................................................................................................... 23
5.8HOW TO PERFORM THE TRACKING ADJUSTMENT ................................................................................................... 23
5.9HOW TO TEST/USE THE BLADE CLUTCH/BRAKE SWITCH........................................................................................ 24
5.10HOW TO TEST THE OPERATOR PRESENCE CONTROL (OPC) SWITCH................................................................... 24
6SERVICE AND ADJUSTMENTS................................................................................................................................... 24
6.1 TIRE MAINTENANCE AND PRESSURE..................................................................................................................... 24
6.2 HEIGHT OF CUT................................................................................................................................................... 25
6.2.1 DECK LIFT SPRING ADJUSTMENT ............................................................................................................................................... 25
6.2.2 DECK ADJUSTMENTS ........................................................................................................................................ 25
6.3 BELT TENSION ADJUSTMENT................................................................................................................................ 26
6.3.1 REPLACING THE DRIVE BELT............................................................................................................................. 26
6.3.2 REPLACING THE CUTTER DECK BELT(S) .............................................................................................................26
6.4 HOW TO MOVE THE MOWER IF THE ENGINE WON'T START.................................................................................... 27

4
6.5 HYDRAULIC SYSTEM............................................................................................................................................ 27
6.6 HYDRO OIL TANK CHECK / FILL............................................................................................................................ 27
6.7 BLEEDING AIR FROM THE HYDRAULIC SYSTEM...................................................................................................... 27
6.8 BATTERY SERVICE............................................................................................................................................... 28
6.9 PARKING BRAKE ADJUSTMENT............................................................................................................................. 28
6.10 LUBRICATION..................................................................................................................................................... 28
6.11 CUTTING BLADES .............................................................................................................................................. 28
6.12 FUEL EVAPORATION SYSTEM............................................................................................................................. 29
6.13 SPINDLE & DRIVE PULLEY SPLIT HUB R&R......................................................................................................... 29
6.14 LOADING AND UNLOADING ............................................................................................................................................................. 30
6.15 TRANSPORTING ................................................................................................................................................. 30
6.16 CLEANING THE MOWER...................................................................................................................................... 30
6.17 KAWASAKI ENGINE MANUAL/MAINTENANCE ........................................................................................................ 30
7 ELECTRICAL SCHEMATIC ................................................................................................................................ 31
8 DECALS............................................................................................................................................................... 32
9MAINTENANCE INTERVAL CHART .................................................................................................................. 33
MAINTENANCE RECORD ......................................................................................................................34
POWER EQUIPMENT LIMITED WARRANTY....................................................................................................... 35
FEDERAL & CALIFORNIA EMMISION CONTROL WARRANTY STATEMENT ................................................. 36
CUT QUALITY AND MOWING TIPS...................................................................................................................... 38

5
Pre-Delivery Service of Mower by Dealer
If you are not completely familiar with the Safety Instruction Manual
read it now before proceeding with the Pre-Delivery Service of the
mower. Only your authorized Wright dealer should perform the
Pre-Delivery Service of the mower.
The Wright Stander Intensity is shipped completely assembled and has been adjusted and tested at the
factory. However, due to jostling during the shipping process and the delivery time lapse the following items
need to be repeated again before starting the mower. After you have uncrated the mower, follow these
procedures in the order indicated:
Inspect the mower for any damage, unusual conditions or missing parts.
Inspect the mower for all of its decals, especially the warning decals. There should be one blade warning
decal on each side of the deck, the “shield missing” under the blade belt covers, and the dash decal.
Check service, parts and recall bulletins to ensure unit does not need any updates.
Check (and fill if necessary) engine oil level according to the engine manufacturer’s recommendation.
Check (and fill if necessary) hydraulic fluid level. Use fully SYNTHETIC oil: Mobil-1 15W-50 (see Hydro
Check/Fill section of this manual).
Check rear tire pressure –18 –22 psi. is recommended. Use the higher pressures for heavier operators.
Front Casters are equipped with non-pneumatic tires and do not require any air. Lowering tire pressure will
affect deck pitch. Always check pitch any time tire pressure is set below recommended pressures.
Check the battery to see that the cables are tight and connected properly. The battery is 12 volts and is a
maintenance-free battery. Only charge the battery if it will not start the mower properly.
Check the Rapid-Hite deck height adjustment mechanism for proper operation.
Lubricate all moving parts (see Maintenance Items section of this manual).
Add regular unleaded gasoline to fuel tank. (use a minimum of 87 octane gasoline) (You may use gasoline
containing up to 10% ethanol and gasoline containing up to 5% of methanol.)
Check brake safety interlock.
Try starting the engine with the parking brake released. (Engine should not start. If engine starts, service
the parking brake locking system)
With the hand controls in the middle or neutral position, apply the parking brake.
Start the engine according to the engine manufacturer’s recommendation. Let the engine run at low - mid
RPM for several minutes to ensure the engine oil reaches all of the engine parts and gets the hydraulic
fluid circulating through the pumps, etc.
Check if the parking brake locking system prevents the units from being driven while engaged. If not,
service the parking brake locking system.
Release the parking brake. Next, move the hand control levers, one at a time, to make the wheels move in
forward and backward rotation.
Before testing the blade clutch/brake operation, make sure the area is clear and there is nothing vulnerable
to possible thrown objects from under the mower. No one should be near the mower deck or in its line of
discharge at this or at any time. The discharge chute deflector should be in the down position.
WARNING

6
Move the engine throttle control to ¾ RPM speed setting.
Turn on the blade clutch switch. Run blades for approximately one minute. Next, engage and disengage
the blades a few times about 10 seconds apart. If the blades do not start and stop in a few seconds each
time, service the blade brake system.
With the blades on, disengage the OPC switch to test the Operator Presence Control switch (OPC). A time
delay has been added to the OPC system. The engine should die and the blades should stop with-in 6-9
seconds after stepping off of the foot platform. If not, service the OPC system.
Disengage the blades.
Drive the mower around on a level parking lot. Check that the mower drives in a straight line when both
hand controls are at the full speed position. (If not, refer to How to Perform The Tracking Adjustment
section of this manual) (The control handles may not line up perfectly)
As you drive the mower, listen for any unusual noises and test for irregular operation and adjust or
service as necessary.
Go over the safety information and operating procedures in this manual with the customer. Instruct each
customer in proper operation and observe the customer during their initial operation on a level parking lot.
Repeat until the customer is familiar and comfortable with the basic operation and use of the mower.
Dealer:
Register the mower online within 14 days from the date of retail purchase.
(If unable to use the online registration process, contact your Distributor to
register for you)
Registering the product indicates you have successfully completed the pre-delivery
service checklist.
The limited warranty is considered invalid unless the unit is registered and the above
steps are taken.
Remember, the purchaser is both your customer and our customer and his/her
satisfaction is very important. Thank you for supporting our products.
The mower is now ready for delivery to your customer

7
1 Introduction
This mower is built to the highest standards in the industry. However, carelessness or operator error may
result in serious bodily injury or death. Accident and hazard prevention are dependent upon the awareness,
concern, wisdom, and proper training of the personnel involved in the operation, transport, maintenance,
and storage of the equipment. Make sure every operator is properly trained and thoroughly familiar with all
of the information in this manual before operating the equipment.
This machine is constructed only for mowing grass on lawns without obstacles such as stones, tree stumps
etc. The machine can also be used for other tasks when equipped with special accessory attachments;
Grass Gobbler, Velke Sulky and JRCO attachments. All other types of uses are incorrect. The
manufacturer’s directions concerning operation, maintenance and repairs must be carefully followed.
Lawn mowers and all power equipment, can be potentially dangerous if used improperly. Safety requires
good judgment, careful use in accordance with these instructions and common sense.
The machine must only be operated, maintained and repaired by persons familiar with the machines special
characteristics and who are also knowledgeable about the safety instructions. Use only approved repair
parts to maintain.
Accident prevention regulations, other general safety regulations, occupational safety rules, and traffic
regulations must be followed without fail.
Unauthorized modifications to the design of the machine will absolve the manufacturer from liability for any
resulting personal injury or property damage.
1.1 Technical Data
Weight of overall machine 36” ( 91 cm) = 726 lbs (329 kg)
48” (122 cm) = 815 lbs (370 kg)
52” (132 cm) = 823 lbs (373 kg)
Machine dimensions 36 ”(91 cm) = 62”(157.5 cm) L x 36.5” *49.5” (93 cm *126 cm) W
*Chute deflector down 48” (122 cm) = 59.75”(152 cm) L x 49” *62” (124 cm *157.5 cm) W
52” (132 cm) = 59.75” (152 cm) L x 53” *66” (135 cm *168 cm) W
Speeds Fwd. 8.2 mph (13.2 km h), Rev. 3.5 mph (5.6 km h)
Power supply 12V DC
WARNING
CALIFORNIA
Proposition 65 Warning
The engine exhaust from this product contains
chemicals known to the state of California to
cause cancer, birth defects or other
reproductive harm.

8
Do's Don'ts
Read the operators manual before attempting to operate this machine Don't disable safety switches
Use all PPE's, eye protection, ear protection and safety shoes Don't operate when lightening is seen
Ensure all safety switches are operational Don't lift with a forklift
Keep all shields and covers in place Don’t change RPM's outside of operating limits
Clean flammable material from machine Don’t tow or push
Inspect fuel system and fuel lines for cracks, leaks and dryrott Don’t operate on slopes when wet
Inspect area to be mowed for hazards Don’t leave a running machine unattended
Onlyoperate in daylight Don’t change the engines governor setting or overspeed the engine
Mow safedistances away from drop-offs and other hazards Don’t operate the machine wearing sandals, sneakers or any loose fitting clothes
Maintain a safe distance from people and pets Don’t back up without being aware of what is behind the machine
Follow daily and weekly maintenance checklists Don’t suddenly push in forward direction while machine is in a rearward motion
Observe traffic laws while driving machine from one location to another Don’t operate a poorly maintain machine
Thoroughlyinspect the machine after striking a foreign object Don’t allow persons to operate this machine without reading the operator manuals
Turn off blades when not mowing Don’t put hands or feet under any part of the machine while it is running
Slow down before turning Don’t ever carry passengers
Stop engine before removing Grass Gobbler or cleaning under deck Don’t discharge material towards anyone
Use caution when loading or unloading the machine onto a truck or trailer Don’t operate the machine if you are sick, fatigued or under the influence of alcohol or drugs
1.2 General Safety Instructions
The Wright Stander Intensity is designed with your safety in mind. It has the following safety systems with
which you should become familiar:
The warning decals on the mower including the instrument panel warning
DO NOT disable any of the safety features.
The blade switch must be “off” before starting the engine
Your feet must be on the foot platform in order to engage the blades
If you remove your feet from the foot platform while the blades are running the engine will stop and the
blades will brake in seconds
Letting go of the hand controls will stop the wheels instantly
Spring loaded chute deflector helps reduce trajectory of thrown objects
Belt/pulley covers on cutter deck
Anti-tip rollers provided at the rear of the mower reduce the risk of mower tipping.
1.2.1 Do’s and Don’ts
1.2.2 Warnings!
These warnings are provided to improve safety and should be carefully read before using or maintaining the
machine.
1.3 Important Information
It is vital that these instructions are available to machine users. It is also important to retain with the machine
if the machine is sold or transferred to another user.
WARNING
This symbol with the word “WARNING”
indicates a potentially hazardous situation
which, if not avoided, could result in
death or serious injury.
CAUTION
This symbol with the word “CAUTION”
indicates a potentially hazardous situation
which, if not avoided, could result in minor
or moderate injury.

9
WARNING
WARNING
WARNING
WARNING
WARNING
1.4 Owner/User Notice
The owner’s/user’s obligation is to instruct themselves and all potential users in the safe operation of this
equipment and be sure they read and follow the instructions in this safety manual and other material
provided by Wright Manufacturing, Inc. before using or allowing others to operate the equipment. Do not
operate this unit unless you carefully read, understand and follow the assembly, installation, and safety
instructions contained in this manual and the warning decals provided on the unit. Do not allow other
persons to use this unit unless you make sure they carefully read, understand and follow these instructions.
Never allow children to operate or play on the unit.
1.5 Safety for Operation
The Wright Stander Intensity should only be used by fully trained operators to prevent the risk of injury to
themselves or other personnel. The owner’s/user’s obligation is to instruct themselves and all potential
users in the safe operation of this equipment and be sure they read and follow the instructions in this safety
manual and other material provided by Wright Manufacturing, Inc. before using or allowing others to operate
the equipment. DO NOT operate this unit unless you carefully read, understand and follow the operation
and safety instructions contained in this manual and the warning decals provided on the unit. DO NOT
allow other persons to use this unit unless you make sure they carefully read, understand and follow these
instructions. Never allow children to operate or play on the unit.
1.6 User Qualifications
This product is designed for use by physically fit, experienced, professional commercial mower operators
who have a minimum of 160 hours of experience operating twelve horsepower and greater industrial
mowers. Operators must be 18 years or older and weigh at least 120 pounds and no more than 325
pounds. They must have read and understood this manual. DO NOT allow children to operate the mower.
Never allow passengers on the mower. DO NOT allow adults to operate the mower without proper
instruction mentioned above.
1.7 User Clothing
DO NOT operate the mower while wearing sandals, tennis shoes, sneakers, or shorts. Always wear long
non-baggy pants. Wear high-top leather steel-toed work boots with thick, textured tread, soft-rubber soled
at all times. Hard or smooth soled shoes are too slippery for a good footing on mower platform. NEVER
wear loose-fitting clothing or jacket pockets that can get caught on the handlebars or control levers of any
mower you drive. Wearing safety glasses, ear protection and safety shoes is advisable and required by
some local ordinances and insurance regulations.
1.8 Inspect Mower Before Each Use
DO NOT use the mower if any parts are not maintained in good operating condition. Examine the moving
parts prior to each use. Look for excessive wear, bald or worn tires, cracks in parts, loose or missing bolts,
cotter pins, linchpins or “hair” pins or cable yoke pins and replace before operating the mower. Make sure
all safety equipment provided with the mower is in good operating order, including all the warning decals
and the required operator-presence device which stops the engine and blades when the foot-operated
Operator Presence Control (OPC) switch is released. (To test the OPC, follow instructions in the Operating
Instructions section of this manual.) Inspect the two anti-tip rollers and their respective bolts at the rear of
the mower for tightness and proper operation. Be sure that all parts of the hand-operated hydraulic control
system are tight and secure. This is to reduce the possibility that the mower could have a loss of control.

10
WARNING
WARNING
WARNING
1.9 Regular Mower Safety
Keep your Wright mower in good operating condition, and keep safety devices and shields in place and in
working condition. Replace worn tire(s) with less than 3/32” of any tread groove left. Use tires with the tread
pattern specified by Wright Mfg., Inc. only. DO NOT change the engine governor settings or over-rev the
engine contrary to engine manufacturer specifications. Failure to comply can compromise operator safety,
shorten equipment life and void your manufacturer’s warranty. Keep all nuts, bolts, and screws tight to be
sure the equipment is in safe working condition. Check the blade mounting bolts for proper tightness every
eight (8) hours of operation. Check the blades for excessive wear and sharpness every four to eight (4-8)
hours of operation. Sharpen dull blades. Replace blades when they become excessively worn. The mower
should not be used after the blades or other part of the mower strikes a foreign object, until conducting a
thorough inspection and any damage is repaired. When inspecting or changing blades, turn off the blade
clutch switch, apply the parking brake, stop the engine and remove the key. Make sure the chute deflector is
always in place and operating properly. Replace if the deflector becomes worn or ceases to properly deflect
the grass in a safe manner. (Refer to the maintenance interval chart at the end of this manual)
1.10 Prevent Fires
Machine fires and structural fires can occur if a machine is stored before allowing it to cool, if debris is not
removed from critical areas of the machine, or if the machine is stored near combustible materials.
Remove grass and debris completely from engine compartment and muffler area, and from on top of
the mower deck, before and after operating machine, especially after mowing or mulching in dry
conditions.
Always shut off fuel when storing or transporting.
Do not store near an open flame or source of ignition, such as a water heater or furnace.
Check fuel lines, tank, cap and fittings frequently for cracks or leaks. Replace immediately if necessary.
1.11 Work Area Conditions & Inspection
Prior to operating the unit, carefully inspect all lawn/ground areas where you plan to use the mower for
hidden, hard-to-see objects or uneven ground that may be hidden in the grass. Clear the work area of
moveable objects such as wires, rocks, glass, toys, etc. that might be picked up by the mower and
dangerously thrown. Remove, if possible, or mark the location of all immovable objects or irregular areas
and be sure not to hit them with any part of the mower, its deck or the blades. Obstacles such as holes,
abrupt changes in ground contour, tree trunks, stumps or roots, pipes protruding from the ground, paving
edges, etc. in the path of operation can abruptly turn or stop the mower. This could throw you off the mower
or into and possibly over the handle bars causing serious injury or death. The faster you are moving the
more potential there is for injury. Mow only in daylight or in good artificial light. Keep away from drop-offs,
the edges of ponds, streams, pools, etc. especially at the bottom of slopes. Do not mow when children or
others are around. When the Wright mower is in use, never direct the grass discharge toward bystanders,
traffic, cars or buildings nor allow anyone within 50 feet of the machine while in operation. Thrown objects
can pass through glass windows and some walls of buildings. There is extreme risk of danger from thrown
objects or being cut by the blades of the mower or being run over if you lose control. Never operate the
mower in an enclosed area without good, approved ventilation. Exhaust fumes are dangerous.
1.12 Initial Operating Safety Guidelines
Read and understand the warnings on the instrument panel of the mower.
Regularly check and test the safety devices for correct function.
Recommended PPE is safety shoes, safety glasses and ear protection.
Keep a firm hold on the stationary handle at all times.
Keep both feet on the foot platform at all times.
Know the controls and how to stop quickly.

11
WARNING
WARNING
Before attempting to start the engine, follow all starting instructions below and in the engine operator’s
manual.
Look behind before backing up.
Before leaving the operator’s position, even momentarily, turn off the blade clutch engagement switch and
apply the parking brake. Keep others from coming near the mower. Get back on the mower as soon as
possible.
When leaving the Wright mower unattended, turn off the blade clutch engagement switch, apply the
parking brake, stop the engine and remove the key. Never leave the machine unattended on a slope in
case someone disengages the parking brake. This could create a rollover hazard.
When transporting, driving onto transport vehicles, into buildings, across parking lots or otherwise not
mowing grass, turn off the blade clutch engagement switch to reduce risk of thrown objects and rotating
blade hazard. After coming to a stop apply the parking brake, stop the engine and remove the key.
Before performing any maintenance or repair service, disengage power to blades, apply the parking brake,
stop the engine, remove ignition key and spark plug wire from spark plug(s).
All operators of this mower should exercise caution when driving this mower at high speeds. Sudden
acceleration or deceleration may cause serious injury.
Do not allow inexperienced persons to operate the mower until they have read and understood these
safety instructions. Operate the mower at slower speeds while becoming familiar with it.
The grass discharge chute deflector must be installed at all times and in the down position except that it
may be raised when cleaning out the deck or a grass catcher is installed or a mulch kit and block-off plate
is properly installed.
If the mower discharges grass clogs, turn off the blade clutch switch, apply the parking brake, stop the
engine and remove the key before removing obstruction(s).
Keep all shields and covers in place, namely, all blade and belt covers, engine shields, and grass
discharge chute deflector.
Keep hands, feet and clothing away from rotating parts, especially the rear wheels, blades, engine
flywheel, belts and pulleys.
Do not touch engine, muffler or hydraulic system while engine is running or soon after it is stopped. These
areas can be so hot as to cause severe burns.
Clean grass, leaves and lubricant spills from surfaces after use to prevent fire hazard.
Be alert for traffic when crossing roads or operating near roadways.
Before climbing curbs, crossing gravel drives, sidewalks or roads, turn off the blades and wait for them to
stop.
1.13 Safety for Maintenance
Repairs carried out by untrained or unauthorized personnel may result in personal injury or serious
malfunction of the Stander Intensity.
If Guarding is removed for inspection and component replacement, ensure the parking brake is applied
and key is removed prior to inspecting or making repairs and that the guarding is replaced before
operation.
1.14 Operation in Forward Direction
Always keep a firm grip on the mower stationary handlebar with both hands. Operate the mower slowly
until you become familiar with how the mower operates. Do not operate the mower faster than conditions
allow. For example, hills, wet or bumpy ground, dim light or high grass are all conditions requiring slower
speeds. Never operate the mower at the highest speed unless you are on level, wide, open areas of clearly
visible ground or transporting on paved areas. Speeding with any mower is dangerous, and so is traveling
faster than conditions should permit on this mower. Sudden stops from excessive speed or falling off the
mower may cause serious injury or death.

12
WARNING
WARNING
WARNING
1.15 Operation in Reverse
Always keep a firm grip on the mower stationary handlebar with both hands. Keep both feet firmly on the foot
platform. Look behind you before backing to prevent injuring yourself or anyone behind you. Operate the
mower very slowly, inching it backward until you become familiar with how the mower operates. Always
operate slowly if in an awkward location or position. While backing up never place your foot or feet on the
ground near the back edge of the mower to prevent serious personal injury if the mower were to run over you.
1.16 Zero-Radius Turn Operation
During zero-radius turns (when one mower wheel rotates backwards while the other rotates forward) drive
extra slowly to reduce the possibility of losing traction, or control, or becoming dizzy. This will help prevent
you from being thrown off the mower. Be aware that if you do a turn on a slope you may go through all of the
orientations to a slope mentioned below and must handle the mower accordingly.
1.17 Operation on Slopes
DO NOT operate on steep slopes. Do not operate the mower on slopes steeper than you can feel secure
about the traction of the tires and the stability of the mower. Do not operate the mower on slopes at all when
the grass is wet. There is a danger of suddenly sliding sideways or down the hill. When operating on a slope,
travel across the grade whenever possible, not in an up or down pattern. Reduce speed and exercise
extreme caution on slopes and in sharp turns to prevent tipping or loss of control. Be especially cautious
when changing direction on slopes.
When pointing up a slope, your mower has the most weight on the drive wheels and therefore the most
traction at the tires. However, this is the angle that it has the most tendency to tip back (“pop a wheelie.”)
This is the preferred angle for mowing small areas of steeper slopes.
Recommendations for this angle:
Lean as far forward as possible to add your weight to the front of the mower.
Accelerate gently. Do not accelerate quickly to avoid “popping a wheelie”.
If backing down the hill, do not stop suddenly but slow down gradually.
When pointing down a slope, your mower has the least weight on the rear drive wheels and therefore the
least traction at the tires. This is the angle that the mower has the most tendency to slide. However, this is
the angle that it has the least tendency to tip back. Avoid this angle, as it has the least advantage for your
mower.
Recommendations for this angle:
Lean back with arms stretched out straight while holding onto the stationary handlebar. This transfers more
of your body weight to the rear drive wheels for more traction.
Do not change speed suddenly to minimize the tendency of going into a slide. Accelerate and decelerate
gently. If you ever go into an uncontrolled slide while pointing down a slope the recommended procedure is
to let go of the handles and jump off if necessary. Otherwise, control the mower gently and stay off slopes
that tend to make the wheels slide.
When crossing a slope sideways, your mower has the average amount of weight on the drive wheels
versus the front wheels, similar to level ground. However, this angle leaves the least weight on the higher
side drive wheel, tending to make it slip. This is the preferred angle for mowing large areas of gentle slopes.
Recommendations for this angle:
Lean back and angle yourself to the higher side. This adds weight to the rear drive wheels and will allow
you to mow more quickly across the slope without sliding. These are general guidelines only. The mower
function and comfort will vary depending on mowing environment, operator driving style and preference.
To reduce the chances of “popping-a-wheelie”, do not accelerate quickly.
Note: Excessively worn tire tread is dangerous. Replace tire(s) with less than 3/32” of any tread groove left.
Use tires with the tread pattern recommended by Wright Mfg., Inc. only. Keep the tire pressure in the drive

13
WARNING
WARNING
WARNING
tires between 18 and 22 psi. Higher pressures will cause the tires to have less traction which may prevent
safe operation.
1.18 Fuel Safety
Handle gasoline with care –it is highly flammable. Do not
smoke while handling gasoline. Use an approved gasoline
container. Never remove the fuel cap or add gasoline to a
running or hot engine or an engine that has not been
allowed to cool for several minutes after running. Never fill
the tank indoors and always clean up spilled gas. NEVER
store the equipment with gasoline in the tank inside a
building where fumes may reach an open flame or spark.
Allow the engine to cool before storing in any enclosure.
1.19 Using a Spark Arrester
The engine in this machine is not equipped with a spark arrester muffler. It is in violation of California Public
Resources Code Section 4442 to use or operate the engine on or near any forest-covered, brush-covered,
or grass covered land unless the exhaust system is equipped with a spark arrester meeting any applicable
local or state laws. Other states or federal area may have similar laws.
1.20 Responsibly Handling Waste Product and Chemicals
Waste products, such as used oil, fuel, coolant, brake fluid and batteries, can harm the environment and
people:
Do Not use beverage containers for waste fluids –someone may drink from them.
See your local Recycling Center or authorized dealer to learn how to recycle or get rid of waste products.
1.21 Hydraulic Safety
Keep body and hands away from pin holes or fittings that eject hydraulic fluid under high pressure. Use
paper or cardboard and not hands to search for leaks. Hydraulic fluid escape under high pressure may have
sufficient force to penetrate skin and cause serious injury. If foreign fluid is injected into the skin, it must be
surgically removed within a few hours by a doctor familiar with this form of injury or gangrene may result.
Seek medical attention immediately. Make sure all hydraulic fluid connections are tight and all hydraulic
hoses and lines are in good condition before starting your Wright mower. Hydraulic fluid is under high
pressure. If you need service on your hydraulic system, please see your authorized Wright dealer.
1.22 Replacement Parts
Use of parts other than specified parts supplied by Wright Manufacturing, Inc. may compromise the safe use of
the mower, are not recommended and their use could void the warranty. Always check with your Dealer or the
Wright Mfg. website, www.wrightmfg.com for the Illustrated Parts List for your equipment.
Wright is fully concerned with your safety. Please read the above repeatedly until you fully understand
the methods to promote the safest operation possible.
REMEMBER –YOUR MOWER CAN BE ONLY AS SAFE AS THE OPERATOR.
FAILURE TO FOLLOW SAFE OPERATING PRACTICES MAY RESULT IN
SERIOUS INJURY OR DEATH.

14
2 Warning, Safety and Instructional Decals
Specific safety warning decals are located on the equipment near immediate areas of potential hazards.
Keep all safety signs legible. Remove all grease, dirt and debris from safety signs and instructional decals.
Replace worn, damaged or missing safety decals.
If an attachment or accessory has been installed, make sure current safety decals are visible.
1 - Choke
2 - Throttle, Slow/Idle
3 -Throttle, Fast/Full
4 - PTO Switch
5 - Digital Hr Meter
6 - Ignition Switch, Off
7 - Ignition Switch, Run
8 –Ignition Switch, Start
9 –Apply Parking Brake to Start
1
2
5
6
7
4
3
76490007
WSTN DASH
76460001
DECAL, DANGER BLADE
HAZARD
76490001
DECAL, SHIELD MISSING
76490050
DECAL, FIRE HAZARD
WARNING
76490089
DECAL, Danger Label - Fuel
WARNING
76490088
DECAL, Warning Label - Fuel
WARNING
8
9

15
3 Specifications
Engine
See your engine owner’s manual
RPM: Full speed 3600 +/- 50 RPM (no load) / Idle: 1550 RPM
Electrical System
Charging System: Internal stator coil
Battery Type: Maintenance free
Battery Voltage: 12 Volts
Fuses: Two, 20 amp blade type

16
Width, deflector down 49.5" (126 cm)
Width, deflector up 36.5" (93 cm)
Length 62" (157.5 cm)
Weight 726 lbs (329 kg)
Width, deflector down 62" (157.5 cm)
Width, deflector up 49" (124 cm)
Length 59.75" (152 cm)
Weight 815 lbs (370 kg)
Width, deflector down 66" (168 cm)
Width, deflector up 53" (135 cm)
Length 59.75" (152 cm)
Weight 823 lbs (373 kg)
36" (91 cm) Stander Intensity
48" (122 cm) Stander Intensity
52" (132 cm) Stander Intensity
Critical Application
Thread
Locker
Torque Range
ft-lbs / Nm
Wheel motor bolts (Securing motor
to support)
Loctite 2760 40-50 / 54-68 Nm
Clutch to engine shaft Loctite 2760 50-55 / 68-75 Nm
Wheel hub to wheel motor N/A 138-158 / 187-214 Nm
Wheel lug nuts N/A 80-90 / 108-122 Nm
Split Hub (Spindle & Drive) (Gr 8)
N/A 13-17 / 18-23 Nm
Blade Bolts
N/A 70-80 / 95-108 Nm
Deck Lift Adj. Hardware
N/A 45 / 61 Nm
Torque Specifications
Fuel System
Capacity: 5.5 Gal. (20.8 L)
Type of Fuel: Unleaded regular gasoline, minimum 85 octane. Do not use gasoline containing
more than 10% ethanol. Do not mix oil with gasoline.
Fuel Filter: In line
Fuel shut off: On, Off located on fuel tank
Safety Interlock System
PTO switch must be disengaged, brake engaged and the control handles in the neutral and
locked position to start the engine.
Operator must have feet on the platform to engage the PTO and brake off or engine will stop.
Drive System:
Two Hydro Gear 10cc variable displacement piston pumps
Two Hydro Gear 12cc wheel motors
Hydro Oil System
Hydro Oil: fully SYNTHETIC motor oil: Mobil-1 15W-50
Hydro Filter: Spin-on, 25 micron, no bypass / PN 34490002
Total Capacity: 3 qts (2.8 L)
Tank Fill Level: Fill until fluid comes to the center of the sight glass.

17
4 Machine Description & Overview
The Wright Stander Intensity is meant to solely cut, bag or mulch grass. The use for any other purpose is
not recommended. Do not disconnect any safety switches or remove any decals.
1. Flexible Chute Deflector 2. Drive Tire 3. Fuel Tank 4. Fuel Cap
5. Brake Handle 6. Stationary Handle Bar 7. Control Levers 8. Deck Lift Handle
9. Kawasaki Engine 10. Muffler & Heat Shield 11. Caster Tire 12. Anti-Scalp Roller
13. Aero-Core Cutter Deck 14. Deck Cover
1
3
2
5
4
7
7
6
10
9
8
11
12
11
12
13
14

18
4.1 Operator’s Area
1 - Anti-Tip Wheels
2 - Brake Handle
3 - Deck Lift Handle
4 - Dash/Control Panel
5 - Fuel Tank
6 - Upright Pad
7 - Battery Box
8 - Foot Platform
4.2 Model & Serial Location
The plate is affixed to the left side frame below the battery stand.
Stated on the plate will be the model, date of assembly and serial number, these will be needed when
ordering parts.
8
3
2
1
4
7
6
5

19
4.3 Control Panel & Steering Control Levers
The Stander Intensity speed and direction are controlled by using the control handles. Moving the control
handles equal distance forward or backward the machine moves in a straight line. By releasing the control
handles during operation, the controls will return to the neutral position and the machine will stop.
1 –Left Forward Motion Control Handle
2 –Left Reverse Motion Control Handle
3 –Right Reverse Motion Control Handle
4 –Right Forward Motion Control Handle
5 –Stationary Handle Bar
6 –Choke
7 –Digital Hour Meter
8 –Throttle
9 –PTO Switch
10 –Ignition Switch/Key
4.4 Digital Hour Meter
The Stander Intensity is equipped with a digital hour meter. Refer to operating/reset instructions below.
The programming specified is:
Default display: Hours
Press once (TMR1): Timer 1, press for 3 sec to reset
Press twice (TMR2): Timer 2, press for 3 sec to reset
Press three times (svc ENG): Will display time remaining until next service
point, hold down to reset. The first interval is 8hr, thereafter
100hr. Beginning 5hr before service point the meter will flash “svc ENG, in
[remaining hours]” every 5 sec.
Shut off engine: Will display how many times the engine has started.
4.5 Fuel System / Shut-Off Valve
The fuel shut-off valve and fuel gauge is located on top of the fuel tank. The
valve should be in the “OFF” position at all times when the mower is not in
use. Do Not fill the tank completely. Max fill level is at the base of the fill
neck. This will allow for the gas to expand
1
2
3
4
5
6
7
8
9
10
Off
On
Max fill level

20
2
1
4.6 Deck Lift Lever
The “Quick Cut” height selector has fifteen different settings, ranging from 1.5” – 5.0” and will adjust the cut
height in ¼” increments. To operate, insert detent pin (1) in desired cut height hole, grab deck lift handle and
press the top button down (2) with thumb and lower to the selected cut height. The deck handle has a locking
mechanism when the button is released but it is also recommended to use the detent pin as well.
4.7 Safety Interlock System
The Wright Stander Intensity is equipped with a safety interlock system. The PTO must be disengaged, brake
applied and control levers in the neutral position in order to start the machine. With the brake applied, the
controls are locked in the neutral position.
Brake “On” Brake “Off”