Wyrestorm APO-DG1 User manual
APO-DG1
USB-C Casting Dongle for Apollo
& Presentation Switchers
Quickstart Guide
WyreStorm recommends reading through this document in its entirety to become familiar with the product’s features prior to starting the
installation process.
IMPORTANT! Installation Requirements
• Visit the product page to download the latest rmware, document version,
additional documentation, and conguration tools.
Copyright © 2022 WyreStorm Technologies | wyrestorm.com
APO-DG1 Quickstart Guide | 220125
INT: +44 (0) 1793 230 343 | US: 844.280.WYRE (9973)
In the Box
1x APO-DG1 USB-C Dongle
1x USB-C to USB-A Pairing Adapter
Panel Description
1
3
24
Number Name Description
1 USB Type-C Port Connect to the Apollo or Presentation Switcher for pairing or source device for sharing
content.
2 Play/Pause Button Press the Play/Pause to stop or continue the content shared to the display (source
content not affected).
3 Project Button Short Press: Short press button to share content or disconnect.
Hold the Button for at least 2s: When using Multiview and multiple screens are shown
on the connected display, hold the button for at least 2s, the content shown through the
dongle will be shown in full screen.
4 LED Indicators Blinking White: The dongle is pairing or establishing connection with the receiver device.
Fast Blinking White: The dongle is upgrading rmware.
Solid Dim White: The dongle is sending content.
Solid White: The dongle is connected to the receiver successfully
Pair with APO-VX20-UC
1. Insert the USB-C connector of the dongle
into the USB-C port on the right side of the
video bar.
2. A message will appear on the display
connected to the VX20 saying "Pairing
Dongle". Wait for the pairing process to
complete before disconnecting the APO-
DG1.
Note: Up to two dongles can be paired with a
VX20.
Pair with APO-200/210-UC
1. Insert the USB-C connector of the dongle
into the USB-C port on the side of the Apollo
device.
2. A message will appear on the display
connected to the Apollo device saying
"Pairing Dongle". Wait for the pairing process
to complete before disconnecting the APO-
DG1.
Note: Up to two dongles can be paired with an
Apollo.
Pair with SW-220/540-TX-W
1. Attach the included USB-A to USB-C adapter
to the APO-DG1
2. Connect the APO-DG1 to the ‘Pairing’ USB-A
port on the front of the switcher
3. A message will appear on the display
connected to the Switcher saying "Pairing
Dongle". Wait for the pairing process to
complete before disconnecting the APO-
DG1.
Note: Up to two dongles can be paired with a
Switcher.
Troubleshooting
No or Poor Quality Picture (snow or noisy image)
• Verify that WyreStorm APO-DG1 Is connected correctly
• Verify that the device is not in ‘pause’ mode
• Verify that APO-DG1 is paired to the correct Apollo or Presentation switcher
No Audio Input or Output
• Verify that the volume on your PC/Mac is not muted
• Verify that the volume on the display is not muted
Specifications
Audio and Video
Video Resolution 1920x1080p @30Hz
Outputs USB-C
Wireless
Frequency Dual band 5Ghz, 2.4Ghz
Protocol 802.11ac
Security WPA2-PSK, 802.1x
Communication and Control
OS Compatibility Windows 7/10/11 MacOS, ChromeOS
USB USB 2.0 Type-C
Power
Power Supply USB Powered
Power Consumption 2.2w
Dimensions and Weight
Length 165mm/6.5n
Width 69mm/2.71in
Height 16mm/0.65in
Weight 60g/0.13lb
Regulatory
Safety and Emission CE | FCC | RoHS | RCM | EAC
Copyright © 2022 WyreStorm Technologies | wyrestorm.com
APO-DG1 Quickstart Guide | 220125
INT: +44 (0) 1793 230 343 | US: 844.280.WYRE (9973)
Warranty Information
WyreStorm Technologies ProAV Corporation warrants that its products to be free from defects in material and workmanship under normal
use for a period of ve (5) years from the date of purchase. Refer to the Product Warranty page on wyrestorm.com for more details on our
limited product warranty.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
The distance between user and products should be no less than 20cm.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.
•Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Manufacturer: Shen Zhen Proitav Technology Co.,Ltd
Address: 301-401,Building 16,Hejing Industrial Park,No.87,Hexiu west Road,Zhancheng
Community,Fuhai street,Baoan District,Shenzhen, China
Operating temperature：0℃ to 45℃
We declare that this device is in compliance with the essential repuirements and other relevant
provisions of Directive 2014/53/EU.
Operation Frequency: 2412~2462MHz; 5150~5250MHz; 5725~5850MHz
Maximum Power:
RED: 2.4G: 12.32dbm; 5G: 16.42dbm; 5.8G: 13.18dbm
FCC: 2.4G: 18.24dbm; 5G: 13.80dbm; 5.8G: 11.67dbm
