Wyrestorm NHD-140-RACK-1U User manual

The NHD-140-RACK-1U is a 1U rack mount that provides a clean installation for up to 2 NetworkHD™ NHD-140-TX encoders.
WyreStorm recommends reading through this document in its entirety to become familiar with the product’s features before beginning the installation
process.
In the Box
1x NHD-140-RACK-1U Chassis
4x Encoder Mounting Bracket
1x Blanking Plate
1x Assembly Screws Pack
Copyright © 2019 WyreStorm Technologies | wyrestorm.com
NHD-140-RACK-1U Quickstart Guide | 190111
UK: [phone] | ROW: 844.280.WYRE (9973)
[email protected]
1U / 2 Slot Rack Mount for NHD-140-TX
Quickstart Guide
NHD-140-RACK-1U
Installing Chassis in a Rack
1. Attach the mounting brackets to the sides of the NHD-140-TX
encoder(s) using the supplied screws.
2. Position the NHD-140-TX encoder(s) through the NHD-140-RACK-1U
front face cutout(s) so that the front or rear face of the encoder(s) is
ush with the front face of the NHD-140-RACK-1U.
3. Attach the NHD-140-TX encoder(s) to the NHD-140-RACK-1U main shelf
using the supplied screws.
Secure with Screws
4. Install the blanking plate (if required) using the provided screws
5. Position and install the assembly into the rack and secure with rack
screws (not supplied).
Tip: To keep the installed devices within operating temperature, do not
position the rack directly above heat generating devices such as ampliers.
1 of 2

Note: WyreStorm reserves the right to change product specication, appearance or dimensions of this product at any time without prior notice.
Copyright © 2019 WyreStorm Technologies | wyrestorm.com
NHD-140-RACK-1U Quickstart Guide | 190111
UK: [phone] | ROW: 844.280.WYRE (9973)
[email protected]
Dimensions and Weight
Dimensions and Weight
Rack Units 1U
Height 43.5mm/1.71in
Width 483mm/19in
Depth 162mm/6.38in
Weight (Empty) 1.01kg/2.23lbs
Front Right Side
Top
483.0 mm.
19.0 in.
435.0 mm.
17.1 in.
43.5 mm.
1.7 in.
161.5 mm.
6.4 in.
259.4 mm.
10.2 in.
2 of 2