X-Vision Optics XANB50 User manual
FOCUS DIAL
Adjust focus dial until you
can see clearly
BOTTOM VIEW
•CHARGE BINOCULAR BEFORE FIRST USE, APPROX. 3 HOURS
•PRESS AND HOLD THE POWER BUTTON TO TURN BINOCULAR ON/OFF.
•BRING THE SCREEN INTO FOCUS USING THE FOCUS DIAL. ZOOM IN AS
NECESSARY. THIS MAY REQUIRE MANY TURNS DEPENDING ON RANGE.
•FOR NIGHT VISION PRESS THE IR BUTTON.
•FOR TAKING PHOTOS AND VIDEO, INSTALL A MEMORY CARD AND
PRESS THE CAMERA BUTTON.
TOP VIEW
Short press to adjust backlight
(screen brightness)
Insert an Micro SD card for photo
and video taking (not included)
MICRO SD CARD SLOT
Thank you for your purchase of the X-Vision Binocular. For
additional information on X-Vision Optics, please visit our website
www.xvisionoptics.com or visit us on Facebook at X-Vision Optics.
X-Vision Optics
Email: [email protected]
Phone: 833-993-2383
For Customer Service Contact Us At:
•Night Vision does not work through glass. The glass will reflect the IR light
signal.
•To see in the dark, make sure to press and release the IR button.
oThere are multiple IR levels (press repeatedly to adjust).
oThe higher the IR setting, the further you will see in the dark.
•ALWAYS make sure to turn off your binocular when not in use.
•You can adjust auto shut off under the mode setting (reference Manual).
•Always power off binoculars before removing the memory card.
•X-Vision Optics Infrared technology is composed of wavelengths that the highly
sensitive technology in the device can pick up and illuminate but the human eye
cannot see. When looking directly at the infrared light, a faint red glow may be
visible.
Table of contents
Other X-Vision Optics Binoculars manuals
