
The products described in the following instruction have
been a subject of certication in a recognized unit and
meet the requirements of 89/686/EWG directive and of
the norm EN1809:2001, synchronized with this direc-
tive, in its full extent; and of EN 250:2003 covering scuba
harness.
The compatibility assessment of ZEOS 28+/38+
has been conducted by:
Polski Rejestr Statków S.A.,
Recognised certication unit nr 1463
Al.Gen.Józefa Hallera 126
80-416 Gdańsk
Poland
ZEOS 28+, ZEOS 38+ buoyancy compensators has been
certied as compatible with 89/686/EWG directive, as
far as it contains air compatible with EN 12021 norm.
Regarding the lack of EN norms for safety requirements
while the use of it takes place with mixtures of higher
oxygen content, the above mentioned buoyancy compen-
sator cannot be regarded as one which has been
a subject of CE certication with gas mixtures with
oxygen level higher than 21% (+/- 2%) as stated in
89/686/EWG directive.
CE CERTIFICATION
10
WARNING
IN NON-EU COUNTRIES ADDITIONAL CONDITIONS, LAW REQUIREMENTS AND BUOYANCY COMPENSATOR
NORMS MAY EXIST. DOUBLE CHECK THE CURRENT REQUIREMENTS IN THE COUNTRY IN WHICH YOU INTEND
TO USE IT.
WARNING
THE BUOYANCY COMPENSATOR IS NOT A SAFETY JACKET: IT DOES NOT GUARANTEE A PROPER HEAD-UP
POSITION ON THE SURFACE.