Xiaomi Mi Smart Standing Fan 2 Pro User manual

Smart Standing Fan 2 Pro User Manual

Safety Instructions READ AND SAVE THESE INSTRUCTIONS
Improper use may lead to electric shocks, fire, personal injury, or other damage.
WARNINGS
1
This appliance can be used by children aged from 8 years and above and
persons with reduced physical, sensory or mental capabilities or lack of
experience and knowledge if they have been given supervision or instruction
concerning use of the appliance in a safe way and understand the hazards
involved. Children shall not play with the appliance. Cleaning and user
maintenance shall not be made by children without supervision.
This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
Ensure that the fan is switched off from the supply mains before removing the guard.
This appliance contains baeries that are non-replaceable.
WARNING: For the purposes of recharging the baery, only use the detachable
supply unit <BLJ24W120200P-V> provided with this appliance.

Safety Instructions
2
Do not use this fan if the power cord of the charging base is damaged or its
power plug is loose.
Do not operate any fan with a damaged cord or plug. Discard fan or return to an
authorized service facility for examination and/or repair.
Do not use this fan in a place where it will easily fall over or where there are other
unstable objects nearby.
Do not excessively pinch, bend, or twist the power cord of the charging base as
this may expose or break its core.
Do not insert your fingers or any object into the front grille, rear grille, or the fan
blades when the fan is in use.
Keep hair and fabrics away from the fan to avoid geing them caught in the fan.
Under normal use of condition, this equipment should be kept a separation
distance of at least 20 cm between the antenna and the body of the user.
This appliance contains built-in li-ion baery. Do not disassemble, impact, crush
the baery or throw it into fire. If there is severe swelling, do not continue to use.
Do not leave the baery in high temperature environment.

1
Safety Instructions
3
Do not use any improper power outlet.
Do not use the charging base provided with this fan for any other device.
Prior to cleaning or other maintenance, the appliance must be disconnected
from the supply mains.
Do not improperly dispose of old baeries. Used baeries should be discarded
at a professional recycling facility.
Do not charge the fan on uneven places or plush materials. Otherwise, it is easy
to cause circuit failure or fire due to poor contact between the charging base
and the charging port.

To avoid electric shocks, fire, personal injury, or other damage, make sure the fan base is installed last. Please follow the installation instructions in the user
manual.
Do not turn on the fan or connect it to the charging base if it is not completely assembled.
Turn off or unplug the fan before installing or disassembling it. Do not touch the on/off buon to prevent the fan from running and causing danger.
Installation
Firmly hold the fan stand to avoid it from falling down and causing personal injury.
Using the Fan
Do not lean on or tilt the fan while it is running.
Do not shake the fan's head repeatedly so as to avoid damage to the internal mechanism.
Immediately stop using the fan if it makes unusual sounds, gives off bad odors, overheats, or rotates irregularly.
Charging the Fan
Do not unplug the charging base by directly pulling at the cord or wiggling it out of the outlet. Instead, pull the plug out itself.
When the baery is depleted, the fan should be charged as soon as possible. To prevent the baery from being damaged, connect the charging base to the fan
base in a timely manner.
Do not aempt to repair the charging base by yourself if it is damaged.
When the charging base is damaged or broken, it must be replaced with a genuine one purchased from the manufacturer or aer-sales service department.
When the fan is charging, the fan base may get warm. It is recommended to charge the fan on insulating materials or in places that are not easily affected by
heat sources, so as to prevent the places where the fan is put from becoming discolored or deformed.
Care & Maintenance
When maintaining and cleaning the fan, make sure to remove the fan base first before removing other parts and to install the fan base last when installing.
Make sure the fan is unplugged before removing the protective cover.
Safety Instructions
PRECAUTIONS
Transportation
4

11 12
13
Package Contents
Fan Assembly
(Front Grille + Fan Blade Assembly
+ Rear Grille)
２
Charging Base
9
Motor & Upper
Stand
１
４
Fan Base
(with Built-in Li-ion Baery)
Hex Key
７
User Manual
10
３
Lower Stand Fan Blade
Assembly Knob
Rear Grille Knob
5 6
Fan Grille Screw ×1
8
5
Read this manual carefully before use, and retain it for future reference.
Note: Illustrations of the product, accessories, and user interface in the user manual are for reference purposes only. The actual product and functions may vary
due to product enhancements.
SmartStanding Fan 2 Pro User Manual
.1
XiaomiIntelligenter Standventilator 2 Pro Benutzerhandbuch
.15
Manualeutente Xiaomi Smart Standing Fan 2 Pro
.29
Manueld'utilisation de Xiaomi Smart Standing Fan 2 Pro
.43
Manualde usuario de Xiaomi Smart Standing Fan 2 Pro
.57
.127
.129
.132
.134
.136
.138
.140
.142
.144
Руководствопользователя Напольного смарт-вентилятора
XiaomiSmart Standing Fan 2Pro
.71
Inteligentnywentylator stojący Xiaomi 2 Pro Instrukcja obsługi
.85
XiaomiAkıllı Ayaklı Vantilatör 2 Pro Kullanım Kılavuzu
.99
.113
Xiaomiﻦﻣ وﺮﺑ 2ﺔﻴﻛذ ﺔــﻳدﻮﻤﻋﺔــﺣوﺮﻣ مﺪﺨﺘــﺴﻣﻞــﻴﻟد
WARRANTYNOTICE
AVISODE GARANTÍA
ГАРАНТИЙНОЕУВЕДОМЛЕНИЕ
GARANTIE
GARANTIEERKLÄRUNG
AVVISOSULLA GARANZIA
GWARANCJA
GARANTİBİLDİRİMİ
نﺎﻤﻀﻟارﺎﻌﺷإ

6
Product Overview
Boom View
Charging Port
Fan Base
Boom Cover
Pad
Top View
Baery Level Indicator
Speed/Scheduled Turn-off Indicator
Wi-Fi Indicator
Natural Breeze Indicator
Charging Base Alignment Mark
Speed Adjustment/Mode Switch Buon
Scheduled Turn-off Buon
On/Off Buon
Oscillation Buon
Charging Base
Motor & Upper Stand
Fan Base
Lower Stand
Fan Assembly
Release Buon
Release Buon
Charging Port

7
Installation
Step 1: Open the fan assembly Step 2: Install the rear grille
Turn the front grille counterclockwise until it separates from
the rear grille. Remove the front and rear grille, then take out the
fan blade assembly.
11
12
13
Install the rear grille onto the motor with " " facing
upwards, and then install and turn the rear grille knob
clockwise to firmly fix the rear grille to the sha of the motor.
6
13
Step 3: Install the fan blade assembly
Align the center hole of the fan blade assembly with the
motor's sha to install it into position, then install the fan
blade assembly knob onto the motor's sha. Turn the knob
counterclockwise to fix the fan blade assembly to the motor's
sha.
12
5
11 12 13
２
6
13
12
5

8
Installation
Step 6: Install the fan base
Insert the fan grille screw into
the hole at the boom of the fan
grille. Turn the screw clockwise with
the included hex key to tighten it.
Step 5: Fasten the front grille
8
7
Step 4: Install the front grille
Standing fan mode: Connect motor &
upper stand to the lower stand, and
then connect lower stand to the fan
base, as illustrated. Once you hear a click,
the parts have been installed successfully.
Note: Press the release buon to remove
the lower stand.
Table fan mode: Connect motor & upper
stand to the fan base. Once you hear a
click, the parts have been installed
successfully.
4
Align the front grille alignment mark with the rear grille le alignment
mark, and make sure the front grille is properly embedded into the
rear grille. Turn the front grille clockwise until the front grille
alignment mark aligns the rear grille right alignment mark. Make sure
the grilles are securely fastened.
11
13
Top View before
Fastening the
Front & Rear Grilles
Front Grille
Alignment Mark
Front Grille
Alignment Mark
Rear Grille Right
Alignment Mark
Rear Grille Le
Alignment Mark
Top View aer Fastening the
Front & Rear Grilles １
１
3
4
8
7
3
4
１
11 13

How to Use
9
Turning On/Off
Charging
≤30％
30%–100%
100％
Baery LevelFan Status
On/Off
· Connecting to the power outlet
Blinking orange
Blinking white
Off
Baery Level Indicator Status
30%–100％
1%–30%
0%
0%–100％Off
Off (The fan will automatically turn off)
Baery LevelFan Status
On
Off
· Not connecting to the power outlet
Baery Level Indicator Status
· Connect the charging base to the charging port on the boom of the fan
base, and then plug in the charging base.
· When the baery level indicator is blinking, the fan is successfully connected
to the power.
· You can use this fan by either connecting to a power outlet or not.
The fan is equipped with a built-in Wi-Fi module, and energy consumption
occurs even when it is turned off. By fully charging the fan and then turning
it off, the baery can last for approximately 2 days. To maintain optimal
baery performance, it is recommended to keep charging the fan if it is not
in use.
· It is recommended to fully charge the fan before use.
Note: Always charge and use the fan in a flat, stable place.
Press the buon to start the fan. When turned on for the first time,
the default speed is slow (1) and the mode is direct breeze.
Turning On
Turning Off
Press the buon to stop the fan while it is running.
Press the buon to adjust the speed, and the corresponding
indicators will light up (see table below). Aer the fan is turned off
and turned back on again, the speed will be the last used one.
Switching Speed/Mode
Switching Speed
Note: means the indicator is on; means the indicator is off.
Indicator
Speed Slow (1)
Orange
White
Medium (2) Fast (3) Turbo (4)

10
How to Use
Press and hold the buon to switch between direct breeze and
natural breeze. The indicator is off while in direct breeze mode and is
on while in natural breeze mode. Aer the fan is turned off and turned
back on again, the mode will be the last used one.
Switching Mode
Enable/Disable Oscillation
Press the buon to cycle through the scheduled turn-off times: 1
hour, 2 hours, 3 hours, 4 hours, and disabled, and the corresponding
indicator(s) will light up (see table below). Five seconds aer using the
scheduled turn-off function, the indicator(s) resume to indicate the
corresponding status of the current speed.
Scheduled Turn-off
Note: means the indicator is on; means the indicator is off.
Scheduled
Indicator
1 hour 2 hours 3 hours 4 hoursDisabled
For more scheduled turn-off options (up to 8 hours), please go to the Mi Home/Xiaomi
Home app.
Note: When the Wi-Fi connection is reset, the oscillation angle range will change to the default
angle of 90°. Unplug then plug the fan in or reset the Wi-Fi connection then turn on the fan, the
fan will automatically oscillate its angle if enabling the oscillation function. The oscillation time
varies depending on different angles, please wait with patience.
Press the buon to enable or disable oscillation. You can set the
oscillation angle range in the app. Aer the fan is turned off and turned
back on again, the oscillation seing will be the last used one.
This product works with Mi Home/Xiaomi Home app*. Control
your device with Mi Home/Xiaomi Home app.
Scan the QR code to download and install the app. You will
be directed to the connection setup page if the app is
installed already. Or search "Mi Home/Xiaomi Home" in the
app store to download and install it. Open Mi Home/Xiaomi
Home app, tap"+"on the upper right, and then follow
prompts to add your device.
* The app is referred to as Xiaomi Home app in Europe
(except for Russia). The name of the app displayed on your
device should be taken as the default.
Note: The version of the app might have been updated, please
follow the instructions based on the current app version.
Connecting with Mi Home/Xiaomi Home App
Simultaneously press and hold the buons and . Once
you hear a long beep, the fan is awaiting a connection, then
you can pair it with a device via the app.
Connecting to Wi-Fi
Adjust the Airflow Direction
Gently li or push down the
fan's head or fan grille to
adjust the airflow upwards
or downwards.
23° upwards
16 °downwards

11
Motor &
Upper Stand
１
Fan Base
4
Lower Stand
３
Fan Blade
Assembly Knob
5
Charging Base
9
Care & Maintenance
Washable Parts
The parts listed below can be cleaned with a so cloth or sponge
using water or neutral detergent.
Note: Stop and unplug the fan, then disassemble it and clean its parts. Aer cleaning,
make sure all parts are completely dry before installing them and using the fan again.
Avoid direct sunlight.
Front Grille Fan Blade Assembly Rear Grille
11 12 13
Not Washable Parts
The parts listed below can be wiped clean with a so, dry cloth.
Notes: Do not rinse the parts listed above with water.
Rear Grille Knob
6
How to Use
Wi-Fi Status & Indicator Description
Wi-Fi Status
Indicator Blinking
orange
Awaiting
Connection
Blinking blue
Connecting
Blue
Connected
Orange
Fail to Connect
Simultaneously press and hold the buons and . Once you
hear a long beep, the Wi-Fi connection has been reset successfully
and then the fan is awaiting a connection. The Wi-Fi connection
needs to be reset on the circumstances listed below:
Reseing Wi-Fi Connection
The Xiaomi account that the fan is paired with has been changed.
The router that the fan is connected to has been changed.
The account or password of the router that the fan is connected to has been changed.
The Mi Home/Xiaomi Home app is unable to control the fan.
Do not use thinner, gasoline, detergent or alkaline detergent to clean any parts.
Enabling/Disabling Wi-Fi
Simultaneously press and hold the buons and for seven seconds
until you hear a notification sound, and then the Wi-Fi is enabled or
disabled.
To disable the function of child lock, go to the page of Mi Smart
Standing Fan 2 Pro in the Mi Home/Xiaomi Home app, or simultaneously
press and hold the buons and until you hear a long beep.
Note: Reseing the Wi-Fi connection or unplugging and plugging in the fan again can also
disable this function.
Child Lock Function

12
Specifications
Product Information Requirements
Maximum Fan Flow Rate (F)
Fan Power Input (P)
Service Value (SV)
Maximum Air Velocity (c)
Measurement Standard for Service Value
Standby Power Consumption (PSB)
Fan Sound Power Level (LWA)
Contact Detailes
Test Data
20.28 m³/min
12.7 W
1.60 (m³/min)/W
3.47 meters/sec
EN IEC 60879:2019
Without Wi-Fi connection: 0.216 W
With Wi-Fi connection: 0.391 W
56.3 dB(A)
Zhejiang Xingyue Electric Equipment Co., Ltd.
South Side, 24th Floor, Jinpin Building, Headquarters Center, Yongkang City, Zhejiang Province, China
Name
Model
Smart Standing Fan 2 Pro Rated Voltage
24 W
Baery Capacity
Baery Type Rechargeable Li-ion Baery
2800 mAh(33.6 Wh)
343 × 330 × 1000 mm
≤58 dB(A)
Wi-Fi IEEE 802.11 b/g/n 2.4 GHz
Approx. 3.2 kg
12 V
Charging Input 12 V 2 A Limited Charging Voltage 0.8 V
Type Standing Fan
Net Weight
Wireless Connectivity
RF Specification
2.4 G Wi-Fi
Operation Frequency
2412–2472 MHz
Maximum Output Power
<20 dBm
*Radio Frequency and Radio Transmission Power
Item Dimensions
Noise Emission
Rated Power
BPLDS03DM

13
Power Adapter
Troubleshooting
Information Published
Manufacturer
Input Voltage
Efficiency at Low Load(10%)
No-load Power Consumption
Model Identifier
Input AC Frequency
Output Voltage
Output Current
Output Power
Value and Precision Unit
100–240
2.0
24.0
A
W
Average Active Efficiency 89.09
83.11
0.070
%
%
W
V~
50/60 Hz
Zhongshan Baolijin Electronic Co., Ltd.
BLJ24W120200P-V
12.0 V
-
-
Fault
The fan doesn't work.
The fan is unable to connect
to Wi-Fi.
Fan blades are stuck.
The baery level indicator
does not light up.
Possible Cause Solution
The baery is depleted.
Fan blades are stuck by a foreign object.
The baery enters into sleep protection.
Unplug the fan and remove the foreign object.
Connect the fan to the charging base to activate the
baery.
The oscillation function
does not work.The fan is under the auto-oscillation state. Wait for the auto-oscillation completes. It will last for 14 seconds at most.
Charge the fan with the charging base.
The Wi-Fi connection is 5 GHz. Connect to a 2.4 GHz Wi-Fi network.
The stand does not properly connect to the fan base.
Child lock is enabled.
The fan has been offline for more than half an hour. Reset the Wi-Fi connection.
Install the fan base with the stand correctly.
Disable the child lock function.

WARRANTY NOTICE
THIS WARRANTY GIVES YOU SPECIFIC RIGHTS, AND YOU MAY HAVE OTHER RIGHTS CONVEYED BY LAWS OF YOUR COUNTRY, PROVINCE OR STATE.
INDEED, IN SOME COUNTRIES, PROVINCES OR STATES, CONSUMER LAW MAY IMPOSE A MINIMUM WARRANTY PERIOD. OTHER THAN AS PERMITTED BY
LAW, XIAOMI DOES NOT EXCLUDE, LIMIT OR SUSPEND OTHER RIGHTS YOU MAY HAVE. FOR A FULL UNDERSTANDING OF YOUR RIGHTS WE INVITE YOU
TO CONSULT THE LAWS OF YOUR COUNTRY, PROVINCE OR STATE.
1. LIMITED PRODUCT WARRANTY
XIAOMI warrants that the Products are free from defects in materials and workmanship under normal use and use in accordance with the respective Product
user manual, during the Warranty Period.
The duration and conditions related to the legal warranties are provided by respective local laws. For more information about the consumer warranty benefits,
please refer to Xiaomi's official website hps://www.mi.com/en/service/warranty/.
Xiaomi warrants to the original purchaser that its Xiaomi Product will be free from defects in materials and workmanship under normal use in the period
mentioned above.
Xiaomi does not guarantee that the operation of the Product will be uninterrupted or error free.
Xiaomi is not liable for damages arising from non-compliance with the instructions related to the use of the Product.
2. REMEDIES
If a hardware defect is found and a valid claim is received by Xiaomi within the Warranty Period, Xiaomi will either (1) repair the product at no charge, (2) replace
the product, or (3) refund the Product, excluding potential shipping costs.
3. HOW TO OBTAIN WARRANTY SERVICE
To obtain warranty service, you must deliver the Product, in its original packaging or similar packaging providing an equal degree of Product protection, to the
address specified by Xiaomi. Except to the extent prohibited by applicable law, Xiaomi may require you to present proofs or proof of purchase and / or comply
with registration requirements before receiving warranty service.
4. EXCLUSIONS AND LIMITATIONS
Unless otherwise stipulated by Xiaomi, this Limited Warranty applies only to the Product manufactured by or for Xiaomi and identifiable by the trademarks,
trade name or "Xiaomi" or "Mi" logo.
The Limited Warranty does not apply to any (a) Damage due to acts of nature or God, for example, lightning strikes, tornadoes, flood, fire, earthquake or other
external causes; (b) Negligence; (c) Commercial use; (d) Alterations or modifications to any part of the Product; (e) Damage caused by use with non-Xiaomi
products; (f) Damage caused by accident, abuse or misuse; (g) Damage caused by operating the Product outside the permied or intended uses described by
Xiaomi or with improper voltage or power supply; or (h) Damage caused by service (including upgrades and expansions) performed by anyone who is not a
representative of Xiaomi.
14

It is your responsibility to backup any data, soware, or other materials you may have stored or preserved on the product. It is likely that the data, soware
or other materials in the equipment will be lost or reformaed during the service process, Xiaomi is not responsible for such damage or loss.
No Xiaomi reseller, agent, or employee is authorized to make any modification, extension, or addition to this Limited Warranty. If any term is held to be
illegal or unenforceable, the legality or enforceability of the remaining terms shall not be affected or impaired.
Except as prohibited by laws or otherwise promised by Xiaomi, the aer-sales services shall be limited to the country or region of the original purchase.
Products which were not duly imported and/or were not duly manufactured by Xiaomi and/or were not duly acquired from Xiaomi or a Xiaomi’s official seller
are not covered by the present warranties. As per applicable law you may benefit from warranties from the non-official retailer who sold the product.
Therefore, Xiaomi invites you to contact the retailer from whom you purchased the product.
The present warranties do not apply in Hong Kong and Taiwan.
5. IMPLIED WARRANTIES
Except to the extent prohibited by applicable law, all implied warranties (including warranties of merchantability and fitness for a particular purpose) will
have a limited duration up to a maximum duration of this limited warranty. Some jurisdictions do not allow limitations on the duration of an implied
warranty, so the above limitation will not be applied in these cases.
6. DAMAGE LIMITATION
Except to the extent prohibited by applicable law, Xiaomi shall not be liable for any damages caused by accidents, indirect, special or consequential
damages, including but not limited to loss of profits, revenue or data, damages resulting from any breach of express or implied warranty or condition, or
under any other legal theory, even if Xiaomi has been informed of the possibility of such damages. Some jurisdictions do not allow the exclusion or
limitation of special, indirect, or consequential damages, so the above limitation or exclusion may not apply to you.
7. XIAOMI CONTACTS
For customers, please visit the website: hps://www.mi.com/en/service/warranty/
The contact person for the aer-sale service may be any person in Xiaomi's authorized service network, Xiaomi's authorized distributors or the final vendor
who sold the products to you. If in doubt please contact the relevant person as Xiaomi may identify.
15

14
Manufactured for: Xiaomi Communications Co., Ltd.
Manufactured by: Zhejiang Xingyue Electric Equipment Co., Ltd.
(a Mi Ecosystem company)
Address: South Side, 24th Floor, Jinpin Building, Headquarters Center,
Yongkang City, Zhejiang Province, China
For further information, please go to www.mi.com
V1.0
Hereby, Zhejiang Xingyue Electric Equipment Co., Ltd. declares that the radio equipment type BPLDS03DM is in compliance with Directive
2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address:
hp://www.mi.com/global/service/support/declaration.html
All products bearing this symbol are waste electrical and electronic equipment (WEEE as in directive 2012/19/EU) which should not be mixed
with unsorted household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a
designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities.
Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. Please contact the
installer or local authorities for more information about the location as well as terms and conditions of such collection points.
Regulatory Compliance Information
Environmental Notice
Steps of Removing the Baery
Europe —EU declaration of conformity
Disposal and recycling information
The built-in rechargeable li-ion baery of this fan contains chemicals that may pollute the environment. Before disposing of this fan, remove the baery
and then discard it at a professional recycling facility.
Warning: The fan will no longer be usable once the baery is removed. The following steps should only be completed upon the permanent disposal of the fan. Do not dismantle the fan on your own for
routine maintenance.
Note: If you accidentally touch the substances leaked from the baery, wash the affected area with a large amount of water and seek medical aention immediately.
1. Turn off the fan and remove the fan base.
2. Take the pads out from the fan base and unscrew the boom cover of the fan base to remove it.
3. Press the cable connector clip that connects to the baery, and pull out the cable. Then unscrew the baery to remove it.
For detailed e-manual, please go to www.mi.com/global/service/userguide
Importer:
Beryko s.r.o.
Pod Vinicemi 931/2, 301 00 Plzeň
www.beryko.cz