Xilinx ML605 User manual

© Copyright 2012 Xilinx
ML605 Restoring Flash Contents
March 2012
XTP055

© Copyright 2012 Xilinx, Inc. All Rights Reserved.
XILINX, the Xilinx logo, the Brand Window and other designated brands included herein are trademarks of Xilinx, Inc. All other trademarks are the property of
their respective owners.
NOTICE OF DISCLAIMER: The information disclosed to you hereunder (the “Information”) is provided “AS-IS” with no warranty of any kind, express or implied.
Xilinx does not assume any liability arising from your use of the Information. You are responsible for obtaining any rights you may require for your use of this
Information. Xilinx reserves the right to make changes, at any time, to the Information without notice and at its sole discretion. Xilinx assumes no obligation to
correct any errors contained in the Information or to advise you of any corrections or updates. Xilinx expressly disclaims any liability in connection with technical
support or assistance that may be provided to you in connection with the Information. XILINX MAKES NO OTHER WARRANTIES, WHETHER EXPRESS,
IMPLIED, OR STATUTORY, REGARDING THE INFORMATION, INCLUDING ANY WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE, OR NONINFRINGEMENT OF THIRD-PARTY RIGHTS.
Revision History
Date Version Description
03/16/12 13.4 Regenerated contents for 13.4.
10/26/11 13.3 Regenerated contents for 13.3.
07/06/11 13.2 Regenerated contents for 13.2.
03/01/11 13.1 Regenerated contents for 13.1.
12/21/10 12.4 Regenerated contents for 12.4.
10/05/10 12.3 Regenerated contents for 12.3.
07/23/10 12.2 Regenerated contents for 12.2

Overview
Xilinx ML605 Board
Software Requirements
ML605 Setup
Restoring ML605 CompactFlash
Restoring ML605 Platform and P30T BPI Flash
References
Note: This presentation applies to the ML605

ML605 Restoring Flash Contents Description
Description
–A CompactFlash image is provided for restoring the ML605 CompactFlash
card
–The ISE iMPACT tool is used to restore the onboard non-volatile memories
with the contents used in the ML605 Getting Started Guide (UG533) for the
Platform Flash and the P30T Linear BPI Flash
Reference Design IP
–Uses XTP044 PCIe x8 Gen1 output files to program Platform Flash
–Uses XTP056 BIST output files to program P30T Linear BPI Flash
Reference Design Source and Applications
–See XTP044 and XTP056
Files for Flash Restoration
–rdf0021.zip – Platform and P30T BPI Flash Devices
–rdf0022.zip – CompactFlash
–Available through http://www.xilinx.com/ml605
Note: Presentation applies to the ML605

Xilinx ML605 Board
Note: Presentation applies to the ML605

ISE Software Requirements
Xilinx ISE 13.4 software
Note: Presentation applies to the ML605

Restoring ML605 CompactFlash

Restoring ML605 CompactFlash
Use a CompactFlash reader to mount the ML605
CompactFlash as a disk drive
Delete all files on this drive
Note: Presentation applies to the ML605

Restoring ML605 CompactFlash
Unzip the rdf0022.zip file to your CompactFlash drive
–Available through http://www.xilinx.com/ml605
Note: Presentation applies to the ML605

Restoring ML605 CompactFlash
After Restoring the CompactFlash, six designs are available:
–CFG0 – Built-In Self Test (BIST)
•See XTP056 – ML605 BIST Flash Application for details
–CFG1 – IBERT
•See XTP046 – ML605 GTX IBERT Design Creation for details
–CFG2 – MIG
•See XTP047 – ML605 MIG Design Creation for details
–CFG3 – MIG
•See UG533 – ML605 Getting Started Guide for details
–CFG5 – System Monitor
•See XTP048 – ML605 System Monitor for details
–CFG6 – FMC XM104 IBERT
•See XTP091 – ML605 FMC XM104 IBERT Design for details
Note: Presentation applies to the ML605

Restoring ML605 Platform and P30T BPI Flash

Restoring ML605 Platform and P30T BPI Flash
Power on the ML605 board
Connect a USB Type-A to Mini-B cable to the USB JTAG connector
on the ML605 board
–Connect this cable to your PC
Note: Presentation applies to the ML605

Restoring ML605 Platform and P30T BPI Flash
Unzip the rdf0021.zip file to your C:\ drive
–Available through http://www.xilinx.com/ml605
Note: Presentation applies to the ML605

Restoring ML605 Platform and P30T BPI Flash
Set S2 to 011001 (1 = on, Position 6 →Position 1)
–This selects Platform Flash
–Mode Switches set to Slave SelectMAP
Set S1 to 0XXX (X = Don’t care, Position 4 →Position 1)
–This disables JTAG configuration from the Compact Flash
Note: Presentation applies to the ML605

Restoring ML605 Platform and P30T BPI Flash
Open an ISE Design Suite Command Prompt
Program the Platform Flash
cd C:\ml605_restore_flash
impact -batch ml605_program_platflash.cmd
Note: Takes about 13 minutes

Restoring ML605 Platform and P30T BPI Flash
Set S2 to 001010 (1 = on, Position 6 →Position 1)
–This selects P30T BPI
–Mode Switches set to BPI-Up
Set S1 to 0XXX (X = Don’t care, Position 4 →Position 1)
–This disables JTAG configuration from the Compact Flash
Note: Presentation applies to the ML605

Restoring ML605 Platform and P30T BPI Flash
Program the BPI Flash
impact -batch ml605_program_bpi.cmd
Note: Takes about 18 minutes

Restoring ML605 Platform and P30T BPI Flash
After Restoring the flash, two designs are loaded in Flash
– BPI – Built-In Self Test (BIST)
•See XTP056 – ML605 BIST Flash Application for details
–Platform Flash – PCIe x8 Gen1 Design
•See XTP044 – ML605 PCIe x8 Gen1 for details
Note: Presentation applies to the ML605

References

References
Virtex-6 Configuration
–Virtex-6 FPGA Configuration User Guide
http://www.xilinx.com/support/documentation/user_guides/ug360.pdf