Xmod Electronics XBOX 360 User manual
!
remove Controller Batteries aboard aircraft
Before boarding any aircraft or packing the wireless controller in luggage that will be
checked, remove any batteries from the wireless controller. The wireless controller can
transmit radio frequency (RF) energy, much like a cellular telephone, whenever batteries are
installed.
Connect your Controller
Up to four controllers, wired and wireless, can be actively connected to a console at one time. Each
connected controller gets a quadrant on the Ring of Light. Before you can connect a wireless
controller, at least one quadrant must be free (unlit). To disconnect a wireless controller, press and
hold the Xbox Guide button for three seconds, and then turn it off. For a
wired controller, disconnect the cable connector.
To connect your wireless controller to your console:
1Press and hold down the
Xbox Guide button until the
controller turns on.
2If your console is not on,
press the Power button
to turn on the console.
3Press and release the
connect button on
the console.
4Press and release the
connect button on
the controller.
5After the Ring of Light on the controller and console spin and flash once, the
controller is connected. The quadrant that remains lit indicates the
controller’s position.
X112994903_Wireless_Controller_E1 1
Xbox 360 Wireless Controller
Thanks for choosing the Xbox 360 Wireless Controller. Your wireless controller lets you experience
the ultimate in wireless freedom with precision, speed, and accuracy. The Xbox 360
Wireless Controller features:
• 2.4-GHz wireless technology with
nine-meter (30-foot) range.
• Integrated headset port.
• Adjustable vibration feedback for longer
battery life.
The Xbox 360 Wireless Controller is for use
exclusively with the Xbox 360™ video game
and entertainment system. For information
about using the Xbox 360 Wireless Controller
with a particular game, see your
game manual.
To enhance your experience with the wireless
controller, try the Xbox 360 Rechargeable Battery Pack and the Xbox 360 Play & Charge Kit. If
you’re looking to expand your wireless experience, consider the Xbox 360 Universal Media
Remote and the Xbox 360 Wireless Networking Adapter.
Before using this product, read this manual and the Xbox 360 console manuals for important
safety and health information. Keep all manuals for future reference. For replacement manuals, go
to www.xbox.com/support or call Xbox Customer Support
(see ”If You Need More Help”).
!
WARNING
Back button
Start button
Xbox Guide button
Left stick
Right stick
Directional pad
Right trigger
Left bumper Right bumper
Connect button Charge port
AA battery pack
Left trigger
A button
B button
X button
Y button
turn your Console and Controller on
To turn your console and controller on, press and hold down the Xbox Guide button until the
controller turns on.
To turn on your console only, press the Power button on your console. To turn on your
controller only, press the Start button on your controller.
turn your Console and Controller off
To turn your console and controller off, press and hold the Xbox Guide button on your
controller for three seconds. Then select whether you want to turn off just your controller or
both your controller and your console. (Selecting the console will turn off both the console
4th Quadrant
LED Indicator
SYNC Button
used to change
Rapid Fire modes
Right Trigger
To Fire
X
ELECTRONICS
XBOX 360 RAPID FIRE CONTROLLER
RAPID FIRE MODES
Just TAP the
SYNC
button or the
MODE
button underneath to cycle through
the modes . At which point the player 4 LED will flash indicating the MODE you are in.
The chip will remember the speed mode (no BURST/AKIMBO), even when you turn your
controller off or remove the batteries.
SYNC - MODES CYCLE
LED BLINKS
BURST
AKIMBO
MODE 1 - SLOW
MODE 2 - MEDIUM
MODE 3 - FAST
MODE 4 - PROGRAM.
MODE 5 - COD5 - SLOW
MODE 6 - COD5 - FAST
YES YES
YES YES
YES YES
YES YES
NO NO
NO NO
LED BLINKS
RAPID FIRE: ON
RAPID FIRE: OFF
Press & Hold Tap
SYNC
LT
Press & Hold Tap
SYNC
LT
RAPID FIRE ON / OFF
TURN THE RAPID FIRE ON/OFF
Press and Hold the
LEFT TRIGGER
and tap the
SYNC/MODE
button to activate/deactivate the
rapid fire Mod Chip.
SPECIAL MODES: AKIMBO-MIMIC / BURST FIRE (3 round shots)
To activate/deactivate any special mode (AKIMBO/BURST):
-
Press & Hold
the
RIGHT TRIGGER.
- Tap the
SYNC/MODE
button.
-
RELEASE
the
RIGHT TRIGGER
- The
LED
will stay
SOLID
, waiting for your input.
- Tap the
LEFT TRIGGER
to activate/deactivate the
BURST FIRE
.
- Tap the
SYNC/MODE
button to activate/deactivate the
AKIMBO
mode.
- Tap the
RIGHT TRIGGER
to
cancel/exit
and go back without any change.
*BURST and AKIMBO cannot be activated on COD5 Compatible Modes.
*Due to the special signal applied to the LEFT TRIGGER on the AKIMBO mode, you cannot
aim/scope correctly when you fire and the akimbo function is active.
MODE 4 - USER PROGRAMMED MODE
The fire speed of this mode can be adjusted/programmed from 5 to 35 shots/sec in 60 steps.
To enter in the programming mode:
- Turn the Rapid Fire
OFF
(press and hold the
RIGHT TRIGGER
and tap the
SYNC
button)
-
Press and hold
the
LEFT & RIGHT TRIGGERS at the same time
and tap the
SYNC
button.
- The LED will blink 4 times.
- Press the
LEFT TRIGGER
to decrease the firing speed.
- Tap the
SYNC
button to increase the firing speed.
- You can
TEST
the speed pressing the
RIGHT TRIGGER
at any time.
- The
LED
will blink faster when you reach the
minimum
or
maximum
speed.
-
Press and hold
the
RIGHT TRIGGER
and tap de
SYNC
button to save and exit.
SPECIAL MODES
LED BLINKS
Press & Hold Tap
Tap for AKIMBO
LT
RT
SYNC
SOLID
SYNC
Tap for BURST FIRE
Tap to CANCEL
RT
MODE
MODE
Press and hold the
RIGHT TRIGGER
to enter
on Special Modes.
The
LED
will stay
SOLID
waiting for your input:
Burst, Akimbo or Cancel.
Tap
SYNC
to activate/deactivate
the
AKIMBO
mode.
Press the
LEFT TRIGGER
to
activate/deactivate
the
BURST
fire.
Press the
RIGHT TRIGGER
if
you want to to cancel the
Special Modes input
USER PROGRAMMED MODE
LED BLINKS
Press & Hold Tap
LT
SYNC
Tap to DECREASE Speed
Tap to INCREASE Speed
Press & Hold
RIGHT & LEFT
Triggers
and
TAP SYNC
To
ENTER Programming Mode
Press the
RIGHT TRIGGER
to
TEST
the firing speed.
LT
RAPID FIRE: OFF
Press
& Hold
SYNC
LT
&
RT
Tap
SYNC
LED flashing when reach
MAXIMUM SPEED
LED flashing when reach
MINIMUM SPEED
Press & Hold Tap
SYNC
RT
RT
Press the
RIGHT TRIGGER
to
TEST
the firing speed.
RT
Press & Hold the
RIGHT TRIGGER and Tap SYNC
To
SAVE
and
EXIT
SPECIAL MODES
LED BLINKS
Press & Hold Tap
Tap for AKIMBO
LT
RT
SYNC
SOLID
SYNC
Tap for BURST FIRE
Tap to CANCEL
RT
MODE
MODE
Press and hold the
RIGHT TRIGGER
to enter
on Special Modes.
The
LED
will stay
SOLID
waiting for your input:
Burst, Akimbo or Cancel.
Tap
SYNC
to activate/deactivate
the
AKIMBO
mode.
Press the
LEFT TRIGGER
to
activate/deactivate
the
BURST
fire.
Press the
RIGHT TRIGGER
if
you want to to cancel the
Special Modes input
SYNC - MODES CYCLE
LED BLINKS BURST
AKIMBO
MODE 1 - SLOW
MODE 2 - MEDIUM
MODE 3 - FAST
MODE 4 - PROGRAM.
MODE 5 - COD5 - SLOW
MODE 6 - COD5 - FAST
YES YES
YES YES
YES YES
YES YES
NO NO
NO NO
LED BLINKS
RAPID FIRE: ON
RAPID FIRE: OFF
Press & Hold Tap
SYNC
LT
Press & Hold Tap
SYNC
LT
RAPID FIRE ON / OFF
USER PROGRAMMING MODE
LED BLINKS
Press & Hold Tap
LT
SYNC
Tap to DECREASE Speed
Tap to INCREASE Speed
Press & Hold
RIGHT & LEFT
Triggers
and
TAP SYNC
To
ENTER Programming Mode
Press the
RIGHT TRIGGER
to
TEST
the firing speed.
LT
RAPID FIRE: OFF
Press
& Hold
SYNC
LT
&
RT
Tap
SYNC
LED flashing when reach
MAXIMUM SPEED
LED flashing when reach
MINIMUM SPEED
Press & Hold Tap
SYNC
RT
RT
Press the
RIGHT TRIGGER
to
TEST
the firing speed.
RT
Press & Hold the
RIGHT TRIGGER and Tap SYNC
To
SAVE
and
EXIT
X
ELECTRONICS
www.xmodelectronics.com
Additional information about CALL OF DUTY 5: This mod chip does not disable or change the detection of rapid fire in Call of Duty 5, this could not be done from a controller.
By understanding how the rapid fire detection in the game works we have been able to create the fastest rapid fire possible. But this also means that the rapid fire is not totally
immune to the game detecting it. Quickly pulling the trigger multiple times while the rapid fire chip is turned on can cause it to limit your rate of fire as the game will see the rapid
fire from the mod chip as well as your manual trigger presses which can sometimes activate the detection within the game and limit your firing rate. But under most circumstances
this will not happen.
CALL OF DUTY 4
Infinity Ward released a new patch for this game on 09/03/09, limiting your firing speed. Although this chip is very fast, you are still limited
by how fast the game allows a weapon to shoot. - TIP: You can use a DOUBLE TAP feature (second tier Perk) to increase the rate of fire on some weapons (G3, pistols, etc)
See operating video at: www.xmodelectronics.com/rapidfire
