XODO Smart Floodlight Pro-Cam E8 User manual

Smart Floodlight Pro-Cam E8
Quick Installation Guide

1
1.Packing List
Open the package, then make sure the Smart
Floodlight Pro-Cam (device) is intact, and with
all the below accessories.
Smart Floodlight Pro-Cam
Installation Manual
Please refer to the installation pictures
in the App, and read this manual and
keep it handy during installation.
Hook
Hang your Smart Floodlight
Pro-Cam while connecting the
wires.

2
Screws(4). Use 2 of these to attach the
supplied bracket to the wall.
图片数量要正确
Plastic Screw Sleeves (4)
Knock the plastic screw sleeve into the hole.
Electrical Caps (3)
Use these to connect Smart Floodlight
Pro-Cam wires to your existing wires as
shown in the diagram.
Waterproof rubber cap(2)
Use the waterproof rubber cap on
the screw hole of thedevice.
WARNING
This manual is for information
purpose only. Working with electricity can be dangerous
unless proper safety precautions are taken.
If you are not comfortable or are inexperienced with the
processes and tools described in this manual, we
recommend that you hire a licensed electrician.

3
2.How it all fits together
4*28
Plastic
Screw Sleeves
Mounting
Bracket
Electrical
Caps
Bracket Screws

4
Light
Adjustment
Knob
Camera
Lock
Collar
Rubber
Caps
Motion
Detector
（for lights）

3.The proper installation height to optimize
the motion sensor performance
WARNING
In order to prolong service life of the equipment,
please try to install the equipment in a place
without rain and high temperature and humidity.
Parallel to groud
05 26 feet (8 Meters)

When mounted at 10 feet （3 meters) off the ground, with
the motion detector tilted at about a 30 degree angle
toward the ground. (Please refer to below diagram).
the Smart Floodlight Pro-Cam will detect human sized
objects at a distance of up to 25 feet (8 meters).
10 feet
(3 Meters)
06

7
OFF
Step 1 - Shut power off at the breaker box.
If you don’t know where your breaker box is or how to
turn off power to the circuit where you are installing
your Smart Floodlight Pro-Cam, Please consult with a
licensed electrician.
Please switch it from [ON] to [OFF]
WARNING: Risk of electrical shock
Disconnect power at the circuit breaker before installing.
Verify that the supply voltage is correct.
Connect fixture to a 110VAC ~ 240VAC 50/60 Hz power
source.
Properly ground fixture.
Always follow code standards when installing wired connections.
Installation and wiring must be performed by a licensed electrician.
CAUTION: Risk of fire
Do not install near any combustible or flammable surfaces or liquids.
NOTICE
Do not connect this light fixture to a dimmer switch or timer.
OFF
WARNING

8
Step 2 - Remove the mounting bracket
Use a screwdriver to unscrew the screws.
Remove the mounting bracket.
1
2
2
1

9
Step 3- Install the waterproof rubber gasket
onto the bracket.
Attach the waterproof rubber gasket onto the
mounting bracket, press into the 6 holes to fix it to the
device.

10
Step 4- To determine the location
First, determine the height of the chassis, and then
use a pen to draw the position of the screw holes
and mark their position.
4
2
1
3

11
Step 5 - Choose a proper place for drilling
Before drilling, ensure that the holes do not
Impact pipe work, cables, electrical wiring or
other building services that may run through
the wall.
Knock the plastic screw sleeve into the
hole. Please use below diagram as
reference.
1
1
2
2

12
Step 6 - Fix base
Carefully push all the wires through the large opening in
the bracket.
Tighten the screws and fix the base. Pay attention to the
horizontal position on the top. Please reference below
Diagrams.

13
Step 7- Connect the power wire
Connect power wire to terminals Black(Hot) and White(
Neutral)
颜色错误, 跟工厂确认电源极性，千万不要犯错！
Brown(Fire)
Ternimals(Ground) White(Neutral)
If you don’t know which is neutral or fire wire coming out
of the junction box, consult with a licensed electrician.
Align the mounting posts with the holes on Floodlight
Cam and press together, securing the screw cap nuts
with the screwdriver.

14
Step 8 - Mounting bracket
Tighten the screws with a phillips什么意思？
head.
Put the waterproof rubber cap on the screw hole.

15
Step 9 - Adjust the Angle of the Floodlight
and camera
Loosen or tighten the screw to adjust the Floodlight
angle
Loosen or tighten the screw to adjust the camera angle
Do not remove your led light part or camera part from
the ball socket on the base.

16
Step 10 - Restore power at the breaker box
After restoring power, the lights will turn on and
your Smart Floodlight Pro-Cam will begin speaking
to you to let you know it is in setup mode.
Please switch it from [OFF] to [ON]
Step 11 - App setup
Open the App Xodo ProCam, follow the user
manual to connect the Smart Floodlight Pro-
Cam to your WiFi network.
What would you like to name
the device?
BackYard
Front Door
Side
Customize...
AT&T 11:57 AM
Device Name
ON
OFF
ON

换好点图片
Connect Smart Floodlight Pro-Cam
to Your APP