Xpedition Archery Xperience User manual

©Hanson Briggs Specialty Advertising Inc
Introduction
Welcome to the Xpedition Archery Team! We appreciate your recent purchase and want to insure you that we are
committed to insuring you get the appropriate customer support, service and product quality. Thank you for joining
our team.
Bow Purchasing Record
Below is an area for you to record all the information regarding your newly purchased bow. This record is for your
own personal reference. Your Xpedition Archery warranty will be valid upon the online registration of your bow by
an authorized Xpedition Archery retailer or yourself at www.xpeditionarchery.com within 30 days of the purchase
date of the original purchaser.
Original Owner Information
Name: _________________________________________________________________
Address: _______________________________________________________________
City: ________________________________ State: ___________ Zip: ____________
Bow Information
Model & Year:___________________________
Serial Number: ____________ (found on riser, opposite side of the shelf)
Purchased At: __________________________________________________________
(Authorized Xpedition Archery Dealer)
Purchase Date: _______________________________________
Sales Associate: ______________________________________
Purchase Price: ____________
Draw Length: ____________ Draw Weight: ____________ String Length: ____________
C. Cable Length: ____________ Y. Cable Length: ____________
Product Warranty
All Xpedition Archery bows have a limited lifetime warranty to the original owner. Each bow has a serial number found
on the riser, opposite side of the model decal, which will be required along with the original owner’s full name to
obtain this warranty service. If you experience the need for repairs you need to consult your local authorized Xpedition
Archery retailer. They can assist you through your repair process and if they deem necessary will contact Xpedition
Archery on your behalf. The authorized Xpedition Archery retailer may charge for service work that accompanies
warranty fulfillment.
Limitation of Liability
Xpedition Archery shall not be liable for any special or consequential damages that result from the performance and
use of the products, even if Xpedition Archery has been advised of the possibility of such damages. Applicable law
may not allow the limitations of exclusion or liability or incidental or consequential damages, so the above limitations
or exclusions may not apply to you. Furthermore the buyer agrees to hold harmless Xpedition Archery and all
associated parties from liability for any and all damage to persons or property, for any reason, from the use of this
product.
Owners Manual - Xperience
© Hanson Briggs Specialty Advertising Inc.
7/21
Draw Weight Adjustments
Changing Draw Weight
On the top side of one of the bottom limbs is a sticker that has the string and cable lengths as well as the bow's
capable peak draw weight. The peak weight is achieved by the limb bolts being completely tightened down. The peak
draw weight can be turned down 18-20 pounds with each bow model. With an Allen wrench loosen the top and
bottom limb bolts. One full turn reduces weight by approximately 2 pounds. Never back off more the 9 turns. Make
sure the adjustment to the top limb bolt and bottom limb bolt is identical. See Figure 4.
1665 Prosperity Rd • Decorah, IA 52101
Figure 4 Allen limb bolt
Safety & Maintenance
• All models of Xpedition Archery bows should only be put in bow presses that compress by limb tip contact only.
• The strings have factory installed speed nocks. Changing or removing these will reduce the performance of your
bow.
• Avoid storing your bow in an environment where it is subject to high heat and always make sure the bow is dry
when storing.
• Never dry fire your bow. This will cause damage to your bow and make it unsafe to shoot.
• Before shooting, inspect arrows to insure there are no defects or damages such as cracks in the shaft or nock.
• Periodically apply a light coating of bowstring wax to the string and cables.
• Never attempt to shoot your bow without a nock set.
• Nock or D-loop should be set so that arrow sets at a 90 degree angle with the string. Set the center shot at 7/8".
• Never reduce the draw weight of the bow more than 20 pounds below the specified peak weight.
• Never draw bow without draw stops installed properly.
• Anytime a mod screw is removed, a dab of blue locktight should be applied for reinstall.

©Hanson Briggs Specialty Advertising Inc
Cable
Reference
Hole
Limited Lifetime Warranty
This Xpedition Archery bow has a warranty against defects in materials and workmanship to the original registered
owner when purchased at an authorized Xpedition Archery retailer, for the life of the original owner. This warranty
includes all bow parts, except the string, cables, decals, rubber string suppressors, rubber dampeners, cable guard,
speed nocks, and cosmetic appearance (chips, dings, scratches) caused by normal use and wear. All warranty claims
need to be taken to an authorized Xpedition Archery retailer, if need be the authorized retailer will contact Xpedition
Archery on your behalf.
NOTE: Xpedition Archery reserves the right to make substitutions on warranty coverage for any reason, including but
not limited to availability of parts and/or decorating finishes.
Adjustments and Tuning
It is important that your new bow is adjusted to fit you properly. Your authorized Xpedition Archery retailer will be
able to aide in properly fitting your bow to you to achieve maximum performance. When replacing strings and cables
on your bow it is important to closely follow Xpedition's string and cable specifications to ensure ease of tuning and
proper function.
Each Xperience cam on your Xperience bow has a tuning reference hole. The cable on the top cam should be
within 2 9/16" to 2 5/8" of the reference hole and on the bottom cam the cable should be within 2 3/16"- 2 1/4" of
the reference hole. There is a tolerance of plus or minus 3 twists in each cable and string to optimize tuning.
See Figure 1 & 2.
Figure 1
Xperience
Top Cam
Figure 2
Xperience
Bottom Cam
2 9/16"-2 ⅝"
Rotating
Mod Post
Reference
Hole
Cable
2 3/16"-2¼"
Draw Length Modification Reference Guide
Adjusting Cable Stop
Once the modules are adjusted to desired draw length using the chart above, the cable stop on the bottom cam
module must be set and retightened. Make sure the cams are in tune by measuring the reference holes on top and
bottom cam, then draw the bow back to the desired draw length that matches the module setting. Loosen the allen
screw on the cable stop and slide the cable stop so it contacts the cable. Retighten the allen screw to ensure the stop
does not move. Slight stop adjustment in or out may be necessary to achieve desired feel.
The Xperience cams have rotating modules that achieve multiple draw lengths
when rotated. These draw lengths are designated by the numbering system
that is charted below. The top and bottom modules must always have the same
corresponding number for each draw length. Mod position determined by rotating
mod post (see Figure 1).
Xperience Cam
Draw Length Mod Chart
Mod Position Draw Length
17 19"
16 19.5"
15 20"
14 20.5"
13 21"
12 21.5"
11 23"
10 23.5"
9 24"
8 24.5"
7 25"
6 25.5"
5 26"
4 26.5"
3 27"
2 27.5"
1 28"
Draw Length Adjustments
Figure 3
Xperience
Bottom Cam
Cable Stop
Cable Stop Cable Stop Screw

©Hanson Briggs Specialty Advertising Inc
Cable
Reference
Hole
Limited Lifetime Warranty
This Xpedition Archery bow has a warranty against defects in materials and workmanship to the original registered
owner when purchased at an authorized Xpedition Archery retailer, for the life of the original owner. This warranty
includes all bow parts, except the string, cables, decals, rubber string suppressors, rubber dampeners, cable guard,
speed nocks, and cosmetic appearance (chips, dings, scratches) caused by normal use and wear. All warranty claims
need to be taken to an authorized Xpedition Archery retailer, if need be the authorized retailer will contact Xpedition
Archery on your behalf.
NOTE: Xpedition Archery reserves the right to make substitutions on warranty coverage for any reason, including but
not limited to availability of parts and/or decorating finishes.
Adjustments and Tuning
It is important that your new bow is adjusted to fit you properly. Your authorized Xpedition Archery retailer will be
able to aide in properly fitting your bow to you to achieve maximum performance. When replacing strings and cables
on your bow it is important to closely follow Xpedition's string and cable specifications to ensure ease of tuning and
proper function.
Each Xperience cam on your Xperience bow has a tuning reference hole. The cable on the top cam should be
within 2 9/16" to 2 5/8" of the reference hole and on the bottom cam the cable should be within 2 3/16"- 2 1/4" of
the reference hole. There is a tolerance of plus or minus 3 twists in each cable and string to optimize tuning.
See Figure 1 & 2.
Figure 1
Xperience
Top Cam
Figure 2
Xperience
Bottom Cam
2 9/16"-2 ⅝"
Rotating
Mod Post
Reference
Hole
Cable
2 3/16"-2¼"
Draw Length Modification Reference Guide
Adjusting Cable Stop
Once the modules are adjusted to desired draw length using the chart above, the cable stop on the bottom cam
module must be set and retightened. Make sure the cams are in tune by measuring the reference holes on top and
bottom cam, then draw the bow back to the desired draw length that matches the module setting. Loosen the allen
screw on the cable stop and slide the cable stop so it contacts the cable. Retighten the allen screw to ensure the stop
does not move. Slight stop adjustment in or out may be necessary to achieve desired feel.
The Xperience cams have rotating modules that achieve multiple draw lengths
when rotated. These draw lengths are designated by the numbering system
that is charted below. The top and bottom modules must always have the same
corresponding number for each draw length. Mod position determined by rotating
mod post (see Figure 1).
Xperience Cam
Draw Length Mod Chart
Mod Position Draw Length
17 19"
16 19.5"
15 20"
14 20.5"
13 21"
12 21.5"
11 23"
10 23.5"
9 24"
8 24.5"
7 25"
6 25.5"
5 26"
4 26.5"
3 27"
2 27.5"
1 28"
Draw Length Adjustments
Figure 3
Xperience
Bottom Cam
Cable Stop
Cable Stop Cable Stop Screw

©Hanson Briggs Specialty Advertising Inc
Introduction
Welcome to the Xpedition Archery Team! We appreciate your recent purchase and want to insure you that we are
committed to insuring you get the appropriate customer support, service and product quality. Thank you for joining
our team.
Bow Purchasing Record
Below is an area for you to record all the information regarding your newly purchased bow. This record is for your
own personal reference. Your Xpedition Archery warranty will be valid upon the online registration of your bow by
an authorized Xpedition Archery retailer or yourself at www.xpeditionarchery.com within 30 days of the purchase
date of the original purchaser.
Original Owner Information
Name: _________________________________________________________________
Address: _______________________________________________________________
City: ________________________________ State: ___________ Zip: ____________
Bow Information
Model & Year:___________________________
Serial Number: ____________ (found on riser, opposite side of the shelf)
Purchased At: __________________________________________________________
(Authorized Xpedition Archery Dealer)
Purchase Date: _______________________________________
Sales Associate: ______________________________________
Purchase Price: ____________
Draw Length: ____________ Draw Weight: ____________ String Length: ____________
C. Cable Length: ____________ Y. Cable Length: ____________
Product Warranty
All Xpedition Archery bows have a limited lifetime warranty to the original owner. Each bow has a serial number found
on the riser, opposite side of the model decal, which will be required along with the original owner’s full name to
obtain this warranty service. If you experience the need for repairs you need to consult your local authorized Xpedition
Archery retailer. They can assist you through your repair process and if they deem necessary will contact Xpedition
Archery on your behalf. The authorized Xpedition Archery retailer may charge for service work that accompanies
warranty fulfillment.
Limitation of Liability
Xpedition Archery shall not be liable for any special or consequential damages that result from the performance and
use of the products, even if Xpedition Archery has been advised of the possibility of such damages. Applicable law
may not allow the limitations of exclusion or liability or incidental or consequential damages, so the above limitations
or exclusions may not apply to you. Furthermore the buyer agrees to hold harmless Xpedition Archery and all
associated parties from liability for any and all damage to persons or property, for any reason, from the use of this
product.
Owners Manual - Xperience
© Hanson Briggs Specialty Advertising Inc.
7/21
Draw Weight Adjustments
Changing Draw Weight
On the top side of one of the bottom limbs is a sticker that has the string and cable lengths as well as the bow's
capable peak draw weight. The peak weight is achieved by the limb bolts being completely tightened down. The peak
draw weight can be turned down 18-20 pounds with each bow model. With an Allen wrench loosen the top and
bottom limb bolts. One full turn reduces weight by approximately 2 pounds. Never back off more the 9 turns. Make
sure the adjustment to the top limb bolt and bottom limb bolt is identical. See Figure 4.
1665 Prosperity Rd • Decorah, IA 52101
Figure 4 Allen limb bolt
Safety & Maintenance
• All models of Xpedition Archery bows should only be put in bow presses that compress by limb tip contact only.
• The strings have factory installed speed nocks. Changing or removing these will reduce the performance of your
bow.
• Avoid storing your bow in an environment where it is subject to high heat and always make sure the bow is dry
when storing.
• Never dry fire your bow. This will cause damage to your bow and make it unsafe to shoot.
• Before shooting, inspect arrows to insure there are no defects or damages such as cracks in the shaft or nock.
• Periodically apply a light coating of bowstring wax to the string and cables.
• Never attempt to shoot your bow without a nock set.
• Nock or D-loop should be set so that arrow sets at a 90 degree angle with the string. Set the center shot at 7/8".
• Never reduce the draw weight of the bow more than 20 pounds below the specified peak weight.
• Never draw bow without draw stops installed properly.
• Anytime a mod screw is removed, a dab of blue locktight should be applied for reinstall.
Introduction
Welcome to the Xpedition Archery Team! We appreciate your recent purchase and want to insure you that we are
committed to insuring you get the appropriate customer support, service and product quality. Thank you for joining
our team.
Bow Purchasing Record
Below is an area for you to record all the information regarding your newly purchased bow. This record is for your
own personal reference. Your Xpedition Archery warranty will be valid upon the online registration of your bow by
an authorized Xpedition Archery retailer or yourself at www.xpeditionarchery.com within 30 days of the purchase
date of the original purchaser.
Original Owner Information
Name: _________________________________________________________________
Address: _______________________________________________________________
City: ________________________________ State: ___________ Zip: ____________
Bow Information
Model & Year:___________________________
Serial Number: ____________ (found on riser, opposite side of the shelf)
Purchased At: __________________________________________________________
(Authorized Xpedition Archery Dealer)
Purchase Date: _______________________________________
Sales Associate: ______________________________________
Purchase Price: ____________
Draw Length: ____________ Draw Weight: ____________ String Length: ____________
C. Cable Length: ____________ Y. Cable Length: ____________
Product Warranty
All Xpedition Archery bows have a limited lifetime warranty to the original owner. Each bow has a serial number found
on the riser, opposite side of the model decal, which will be required along with the original owner’s full name to
obtain this warranty service. If you experience the need for repairs you need to consult your local authorized Xpedition
Archery retailer. They can assist you through your repair process and if they deem necessary will contact Xpedition
Archery on your behalf. The authorized Xpedition Archery retailer may charge for service work that accompanies
warranty fulfillment.
Limitation of Liability
Xpedition Archery shall not be liable for any special or consequential damages that result from the performance and
use of the products, even if Xpedition Archery has been advised of the possibility of such damages. Applicable law
may not allow the limitations of exclusion or liability or incidental or consequential damages, so the above limitations
or exclusions may not apply to you. Furthermore the buyer agrees to hold harmless Xpedition Archery and all
associated parties from liability for any and all damage to persons or property, for any reason, from the use of this
product.
Owners Manual - Xperience
© Hanson Briggs Specialty Advertising Inc.
7/21
Draw Weight Adjustments
Changing Draw Weight
On the top side of one of the bottom limbs is a sticker that has the string and cable lengths as well as the bow's
capable peak draw weight. The peak weight is achieved by the limb bolts being completely tightened down. The peak
draw weight can be turned down 18-20 pounds with each bow model. With an Allen wrench loosen the top and
bottom limb bolts. One full turn reduces weight by approximately 2 pounds. Never back off more the 9 turns. Make
sure the adjustment to the top limb bolt and bottom limb bolt is identical. See Figure 4.
1665 Prosperity Rd • Decorah, IA 52101
Figure 4 Allen limb bolt
Safety & Maintenance
• All models of Xpedition Archery bows should only be put in bow presses that compress by limb tip contact only.
• The strings have factory installed speed nocks. Changing or removing these will reduce the performance of your
bow.
• Avoid storing your bow in an environment where it is subject to high heat and always make sure the bow is dry
when storing.
• Never dry fire your bow. This will cause damage to your bow and make it unsafe to shoot.
• Before shooting, inspect arrows to insure there are no defects or damages such as cracks in the shaft or nock.
• Periodically apply a light coating of bowstring wax to the string and cables.
• Never attempt to shoot your bow without a nock set.
• Nock or D-loop should be set so that arrow sets at a 90 degree angle with the string. Set the center shot at 7/8".
• Never reduce the draw weight of the bow more than 20 pounds below the specified peak weight.
• Never draw bow without draw stops installed properly.
• Anytime a mod screw is removed, a dab of blue locktight should be applied for reinstall.