XPower B-18 User manual

XPOWER MANUFACTURE, INC.
220 Clary Avenue
San Gabriel, CA 91776, USA
Tel: [phone]
Fax: [phone]
X-TREME FINISHER STAND DRYER
OWNER’S MANUAL
Model No.B-18

Table of Contents
Introduction .................................................................................................................................. 2
Operation ....................................................................................................................................... 3
Instructions for Special Features ........................................................................................... 3
Adjustment / Accessories ......................................................................................................... 4
Parts List ......................................................................................................................................... 6
Installation Tips and Hints ....................................................................................................... 7
Safety Instructions ..................................................................................................................... 8
Maintenance / Troubleshooting ........................................................................................... 9
Warranty / Service .................................................................................................................... 10
Registration Form ..................................................................................................................... 11

more power and more heat to finish faster with professional salon results. The 1/3 HP motor provides
longer and the easy access filter system keeps your motor running smooth.
• Remarkably QUIET and Lightweight
• Powerful and Energy-Efficient BRUSHLESS DC MOTOR
• Variable Speed Control
• Patented 5-Legged Base Design with Lockable Casters
• Washable Filters
• Durable & Rugged ABS Housing
• Thermally Protected
• 1 Year Limited Warranty
Special Features

XPOWER B-18 Stand Dryers are designed for hands-free pet styling drying.
1.
2.
3.
4.
5.
6.
damages or missing parts.
Upon assembly, place the dryer on a flat surface. Plug the electrical cord into a 3-prong
GFCI outlet.
Turn on the AIR FLOW switch to desired speed.
Heat Switch:
Select desired temperature
Air Flow Switch:
The Air Flow Control is also the ON / OFF
switch.
Anion Switch:

Adjustment / Accessories
Turn handles at both side of
counter- clockwise to loosen).
Tiltable head for different angle
Self-Rising adgustment stand for
Accessories - Filter
A filter is included in the XPOWER
B-18 Stand Dryer, which will help prevent
small debris and pet hair from entering
the motor. To clean the filter, remove the
filter from the unit and wash with mild
soap and warm water. Rinse with clean water
and let dry thoroughly before reassembling
let dry thoroughly before reinstalling.
Filter located at the
(extra filter included)

Volt / Cycle
Horse Power
Max. Amp
Weight
Speeds
Motor
115V / 60Hz
1/3 HP
18 Amps.
18 Lbs.
Variable
YES
Cord Length
Rated Airflow
Heater
Housing
ANION
Filter System
13 Ft.
380 CFM
ABS
YES
Assembly
Brushless DC
center screw in the base.
5. Plug in the unit, turn on the airflow switch and begin using your XPOWER Stand Dryer.

Dryers Parts List
Item No.
Parts Name
1
2Straight hose
3 Dryer motor assembly
4Upper stand pipe
5
6Lower stand pipe
7Stand base screw
8Foldable stand legs
9
1
23
4
5
6
7
8
9
Air outlet nozzle
Height adjustment handle
Lockable Casters

- 7 -
Part #8 & #9
Open Foldable Stand Legs and push Lockable Casters in to Foldable Stand Legs.
Part # 6 & # 7
foot stand (do not force, may cause screw to be stripped).
Part #3 & #4
Connect Upper Stand Pipe to Dryer Motor Assembly.
Part # 2 & # 3
There are notches on both straight hose and dryer motor assembly arm. Assemble and align

WARNING: IMPORTANT SAFETY PRECAUTIONS!
PLEASE READ COMPLETELY BEFORE USING PRODUCT!
When using electrical appliances, especially when children or animals are present, basic safety
These include, but are not limited to the following:
Do not leave the dryer and animal
Unplug dryer when not in use.
Do not use extension cords with the product.
Do not unplug unit by pulling on cord.
Do not expose dryer to rain or water.
maintenance or service.
Do not let air-intake get clogged.
Do not direct dryer air towards eyes or ears of
people or pets.
Never use dryer with a damaged cord/plug or
when unit has been dropped, damaged, or
exposed to rain/water. Please call our
Technical Department for service or repair.
• Do not use any other nozzles not intended
for use with the dryer.
Do not operate without filter in place. Keep
filter clean, as a dirty filter limits air intake
and may damage the motor or cause
Plug only into a properly grounded
receptacle. Always confirm that the
Do not use product for anything other than
its intended purpose.
manual.
•
•
•
•
•
•
•
•
•
•
•
•
•
- 8 -

• To keep the dryer clean, use a damp cloth to wipe the surface of the housing. Removable
part(s) and filters may be cleaned with water and dried thoroughly before reassembling.
• When not in use, unplug and store the XPOWER Pet Dryer in a dry indoor place out of
reach of children.
• Always disconnect the XPOWER Pet Dryer from its power source before performing any
maintenance or cleaning.
PROBLEM POSSIBLE CAUSE SOLUTION
Stand Dryer
not running
No power input Plug in the dryer; check circuit breaker
Air Flow Switch not turned on Turn on the Air Flow switch
Unit fan jammed Contact our Service Department
Dryer vibrates
excessively
Fan unbalanced Contact our Service Department
For any problems not listed below, call your local distributor or contact our Service Department.
- 9 -

- 10 -
XPOWER Limited Warranty
Service
XPOWER Manufacture, Inc. warrants this product to be free from defects in material and workmanship for a period of
hoses and power cords are excluded from the warranty. The liability of XPOWER is limited solely to the cost of the repair
or replacement of parts/the unit at XPOWER’s discretion. This warranty does not cover normal wear of parts and does
not apply to any unit that has been tampered with or used for commercial purposes. This limited warranty does not
cover damage caused by misuse, abuse, negligent handling or damage due to faulty packaging or mishandling in
transit. This warranty does not cover damage or defects caused by or resulting from damages from shipping or repairs,
service or alterations to the product or any of its parts, which have been performed by a repair person not authorized
by XPOWER.
Limitations and Exclusions
If any part or device manufactured by XPOWER Manufacture, Inc. is repaired or replaced, the new/repaired machine
and/or part(s) shall be warrantied only for the remainder of the original warranty period.
For Warranty service and parts replacement (US users only), you must:
A. Call 1-855-855-8868 for a RMA (Return-Merchandise-Authorization) number.
B. Have original proof of purchase.
The end user will be responsible to ship the unit (with RMA Number showing on the shipping label) to the XPOWER
Service Department. XPOWER to inspect, assess and advise the repairs needed and the applicable cost, if any.
For users outside the US, please contact XPOWER Distributor in your country or region for Warranty service
and parts replacement.

Your Name / Company Name
Contact Name Title
Address City State
Zip
Phone Fax E-mail
Stand Dryer Model # Serial # :
Date of Purchase / / Purchased From
WARRANTY REGISTRATION (for US user only)
Address:
XPOWER MANUFACTURE, INC. 220 Clary Avenue San Gabriel, CA 91776, USA
Tel: [phone], Fax: [phone]

TO:
XPOWER MANUFACTURE, INC.
220 Clary Avenue
San Gabriel, CA 91776, USA
Tel: [phone], Fax: [phone]
From:

XPOWER Pet Dryers available in US market
Force Dryers (B-2, B-3, B-4 and B-5 with vacuuming feature)
B-2 (2 HP / 8 Amps / 100 CFM) - for home use
B-3 (2 HP / 8 Amps / 100 CFM)
B-4 (3 HP / 10 Amps / 120 CFM)
B-5 (4 HP / 12 Amps / 140 CFM)
Stand Dryers
B-16 (1/4 HP / 12 Amps / 300 CFM)
B-18 (1/3 HP / 18 Amps / 380 CFM)
Cage Dryers
X-430TF w/ 430MDK (1/3 HP / 3.8 Amps / 2000 CFM)
X-800TF w/ 800MDK (3/4 HP / 7.5 Amps / 3200 CFM)
B-24 (3 HP / 14 Amps / 150 CFM) - with heater
B-27 (6 HP / 20 Amps / 180 CFM) - double motor