XROCKER 2.1 Wireless User manual

2.1 Wireless
& Bluetooth
with vibration
Need Help?
Email: [e-mail]
www.xrockergaming.com
IMPORTANT: You must keep your original retail receipt as proof of purchase.

2
English
French
Spanish
3
14
25
Contents

3
Thank you for purchasing this X Rocker
gaming chair. You are now close to
enhancing your favourite games with
glorious audio!
To get started, please assemble the chair
using the assembly instructions on the
separate leaflet and then follow the
instructions in this manual to
get rocking!
Table of contents
4 Box contents and control panel overview
5 Wireless connection guide: PS4
6 Wireless connection guide: Xbox One
7 Wireless connection guide: TV (All systems)
8 Wired connection guide: TV (All consoles)
9 Wired connection guide: PS4 Controller only
10 Bluetooth connection guide
11 Troubleshooting tips
12 Health and safety information
13 Power supply safety information
Welcome to X Rocker!
ENGLISH

4
+
+
+ +
+
+
Control panel overview
B1 - 3m 3.5mm to 3.5mm Audio cable
B2 - 15cm RCA to female 3.5mm audio cable
B3 - RCA female to female adapters
B4 - Power supply Cable
B5 - Wireless DAC Transmitter
B6 - 1m Optical Toslink Audio Cable
B7 - Micro USB Cable
9.84ft/3
3.28ft/1
2.624ft/1
0.492ft/0.15
B
B1
B3
B5 B6
B4
B2
+B7

5
Step 3: On the main PS4™ menu screen Select (Settings)
> [Sound and Screen] > [Audio Output Settings] >
[Primary Output Port] Change this to [Digitial Optical] >
choose AAC.
Wireless connection guide: PS4
Step 1: Make sure that the PS4™ system is switched OFF. Insert the micro
USB cable
into the X Rocker DAC converter and the other end into one of the front USB
ports on the PS4™ system. Remove the clear plastic covers from both ends of
the optical cable. Input one end of the optical cable into the X Rocker
Wireless DAC (Slot titled SPDIF) and the other into the Optical SPDIF
connector on the PS4™ system.
Step 2: Turn the PS4™ system back on. Select one of the
wireless bands (1,2,3) on the wireless DAC and then switch
to the corresponding band on the chair.
Back
SPDIF
OPTICAL
Save, exit and enjoy!

6
Wireless connection guide: Xbox One
Step 1: Make sure that the Xbox One™ system is switched OFF. Insert
the micro USB cable into the X Rocker DAC converter and the other
end into one of the back USB ports on the Xbox One™ system.
Remove the clear plastic covers from both ends of the optical cable.
Input one end of the optical cable into the X Rocker Wireless DAC
Slot (labelled SPDIF) and another into the Optical SPDIF connector
on the Xbox One™ system.
Step 2: Turn the Xbox One™ system back on. Select one of the wireless
bands (1,2,3) on the wireless DAC and then switch to the corresponding
band on the chair.
Step 3: On the Xbox One™ menu screen, Select (Settings) > [All Settings]
>[Display and Sound] > [Audio Output] > under [Digital Audio],
select [Optical Audio] and set it to [Stero Uncompressed]
Back
SPDIF
Save, exit and enjoy!

7
Wireless connection guide: TV
(All systems)
1. Connect B6 Optical Cable to the B3 Wirelesss DAC transmitter’s SPDIF
Port.
2. Connect other end of B6 Optical Cable to the TV Optical socket.
3. Connect Micro USB Cable to the transmitter and other end to an
available USB socket on the TV.
4. Once connected to your TV, increase volume to 50% of the
maxiumum for the best sound level.**
*N.B: If your TV does not feature an SPDIF or OPTICAL OUT Socket then you
can instead use the 3.5mm audio connection to connect to a headphone
socket.
** Depending on your TV you may need to enable the Optical output
seperately.
B7
B6
Transmitter
TV/SPDIF/Optical Socket
TV USB socket

8
Wired connection guide: TV
(All consoles)
1. Connect B1 Cable to X Rocker control panel MP3 INPUT sockets.
2. Connect other end of B1 3.5mm end into the headphone socket of
your television.
3. Once connected to your TV, increase volume to 50% of the
maximum for the best sound level. **
** Depending on your TV you may need to increase the headphone
volume separately in the TV sound settings.
TV/Mobile/Tablet
B1

9
Wired connection guide: PS4
Controller only
1. Connect the B1 cable to the bottom of the PS4 controller via the
headset socket.
2. Connect the other end of the B1 cable to the chair via the green
port.
3. With the PS4 turned on, go to the main menu (or locate the main
B1
menu screen). Press and hold the PS button on the PS4 controller
until the quick menu appears on screen.
4. In this menu select [Adjust sound and devices]
5. Then select [output to headphones]
6. Change the setting from [Chat Only] to [All audio]
7. Make sure the volume in the previous menu is set to the maximum.
8. Set the control panel Wireless switch to the ‘OFF’ position.

10
Bluetooth connection guide
Step 1:
Switch the X Rocker’s wireless switch to the
Bluetooth position.
Step 2:
On the Audio output device
go into its Bluetooth settings,
turn Bluetooth on if it is not on
already and search for
XROCKER. Upon finding this,
select the XROCKER option.
If a passcode is required the
four digit code will be ‘0000’.