XROCKER BI18-090200-AdU User manual

2.1 BluetoothIMPORTANT: You must keep your original retail receipt as proof of purchase.

2
EnglishFrenchSpanishContents31119

3
Thank you for purchasing this X Rocker gaming chair. You are now close to enhancing your favourite games with glorious audio!To get started, please assemble the chair using the assembly instructions on the separate leaflet and then follow the instructions in this manual to get rocking!Table of contents4 5 6 Box contents and control panel overview Wired connection guide: TV (All consoles) Wired connection guide: PS4 Controller onlyBluetooth connection guideTroubleshooting TipsHealth and safety informationPower supply safety information7 8 9 Welcome to X Rocker!10

1. Power On/OffPress to toggle chair on/off
2. Power Input Plug your power supply into this socket
3. Bass Rotate the dial to adjust the intensity of Bass
audio
4. Volume Rotate this dial to adjust the treble volume
5.Color mode Button Press this button to toggle between
32 different color modes
6. INPUT Socket Plug the 3.5mm cable into here for audio from
your TV or your controller.
7. Out Socket Allows you to connect mulple chairs or audio
devices together
4
Control panel overviewB1 - 3m 3.5mm to 3.5mm Audio cable
B2 – Power Supply Cable
1
2
3
4
6
5
7
9.84ft/3m
B1 B2
+ +
B

5
Wired connection guide: TV (All consoles)1. Connect B1 Cable to X Rocker Control Panel 3.5mm INPUT socket2. Connect other end of the B1 cable to the TV headphone socket.3. Once connected to your TV, increase volume to 50% of themaximum for the best sound level.***NOTE: If your TV does not feature a headphone socket then youmay need to purchase an additional TOSlink adapter to getconnected directly to a console for audio.**Depending on your TV you may need to Increase the headphonevolume separately in the TV sound settings.TV/Mobile/Tablet
B1

6
Wired connection guide: PS4 Controller only1.Connect the B1 cable to the bottom of the PS4 controller via theheadset socket.2.Connect the other end of the B1 cable to the chair via the greenport.3.With the PS4 turned on and in the main menu, press and hold theblack PS button until the quick menu appears.4.In this menu select [Adjust sound and devices]5.Then select [output to headphones]6.Change the setting from [Chat Only] to [All audio]7.Make sure the volume in the previous menu is set to the maximum.B1

7
Bluetooth connection guideStep 1:Switch the X Rocker’s AUX switch to the Bluetoothposition.Step 2:On the Audio output device go into its Bluetooth settings, turn Bluetooth on if it is not on already and search for XROCKER. Upon finding this, select the XROCKER option. If a passcode is required the four digit code will be ‘0000’.

8
Troubleshooting tips•Make sure that the power cable isconnected correctly.•Make sure that the power supply at thepower source is working correctly.•With the chair turned to the ONposition, give the power cable a slightwiggle in the port. If any lights flicker (ornot) then please contact support (detailsbelow).•Please make sure that the volume ofthe source device is at a higher level tostrengthen the audio signal.•Please contact X Rocker support([email protected])regarding this issue.No power going to control panelIssueTroubleshooting stepsNo soundThe cables connected to my X Rocker have been broken accidentallyBluetooth mode cuts out during gameplay / No vibration or subwoofer sound via analogue connection •Review the connection methods on theprevious page and try alternativeconnection methods if possible.•Confirm the device/system is correctlyconfigured as per previous connectionguide•Make sure the Bluetooth switcher is inthe corresponding position that suitsyour connection method (B forBluetooth and AUX for wiredconnections).

9
Health and safety information•Avoid immersing or allowing the X Rocker to come into contactwith liquids.•Please consult X Rocker Support before unscrewing any of theelectrical components on the chair.•Please be mindful of any cabling laid out between the X Rocker andpower source/audio device.•Please be mindful of cabling attached when moving/swivellingthe X Rocker.•If the cables or electrical equipment are broken then this maypresent a choking risk, please contact Support for replacements anddispose of these parts safely.•Do not stand on the X Rocker or exceed the 250lbs weight limit viaother means.•Do not lean back on the chair to the point in which the pedestalwould lift off the ground.•X Rocker armrests are designed for support and comfort duringgameplay, please do not use these as support for getting in/out ofthe chair.•Playing audio for long periods at loud volumes may contribute todifficulties in hearing.•Please be considerate to others when playing audio through theX Rocker speakers at higher volumes.

10
ATTENTION:A.For Power Adapter, the apparatus shall not be exposed todripping or splashing and that no objects filled with liquids, such asvases, shall be placed on the apparatus;B.For Power Adapter, the MAINS plug is used as the disconnectdevice, the disconnect device shall remain readily operable;C.Only use the a achments/accessories specified by manufacturer.Power supply safety informationPower Supply unit trademark: BI Model name: BI18-090200-AdUInput: AC 100-240V~ 50/60Hz 0.8AOutput: DC 9V 2A