XTM AWNING HUB User manual

AWNING HUB XTM
Instruction Manual

Steel PegAwning Pole
Tent
Awning Poles
Guy Ropes
Straps
Carry Bag
Steel Pegs
Tent
Guy Rope
Strap
1
2
20
1
2
2
PARTS LIST
Carry Bag

Step 1
Ensure the ground is free from sharp objects, unfasten the tent and spread it out on
the ground. Then peg down the floor.
Step 2
Slide the roof pole out from both sides until you hear a "click" sound.
Step 3
Stretch all four leg poles until you hear a "click" sound. The poles are now fully
extended.
SET UP INSTRUCTIONS

Step 4
Fasten all floor adjustable webbings and peg down.
Step 5
Fix the roof fly by using guy ropes and peg out away from the tent.
Step 6
To assemble the awning use the steel poles and guy ropes provided. Peg down the
guy ropes to secure the poles.

Step 1
The awning with channel slot (as picture) can be attached to awning hub. There is a
keder connector above the front door.
Step 2
First take the keder connector off awning hub, and insert the keder into channel slot.
ADDITIONAL INSTRUCTIONS
FOR FITTING TO AN XTM AWNING

PLU: 616753 CODE: CL-AHUB
Manufactured and Packaged for SRG PTY LTD
ABN 23 113 230 050
6 Coulthards Avenue Strathpine QLD 4500 Australia
MADE IN CHINA
Step 3
Then zip the zipper of keder connector and awning hub, attach all the adjustable
webbing straps to awning poles.