Xtreme Garage HV-20SE User manual

1
20″HIGH VELOCITY
FLOOR FAN
MODEL HV-20SE
OWNER’S MANUAL
READ AND SAVE THESE INSTRUCTIONS.

2
ASSEMBLY AND OPERATING INSTRUCTIONS
CAUTION:
Read and follow all instructions before operating fan.
Do not use fan if any part is damaged or missing.
WARNING:
To reduce the risk of fire or electrical shock, do not use this fan with any solid state speed control device.
This appliance has a 3-prong plug. To reduce the risk of electrical shock, this plug is intended to fit in an outlet only
one way. If this does not fit the outlet, contact a qualified electrician. Do not attempt to bypass this procedure.
RULES FOR SAFE OPERATION:
zDo not insert fingers or any other objects through the grill guard when fan is in operation.
zDisconnect the fan when moving from one location to another.
zDisconnect the fan when removing guards for cleaning.
zMake sure fan is on a stable, flat surface when in operation.
zDo not use fan in windows. Rain and moisture may create the electrical hazard.
zDo not alter the Fan’s assembly.
zBe sure FRONT and REAR GUARD are completely in locking position before operation.
TUBE BASE ASSEMBLY INSTRUCTIONS
1. Remove the two screws, lock washers and flat washers from V shape tube,
keep for using later.
2. Slide one end of V shape tube to the end of fan tube with smaller hole.
3. Second, slide another end of V shape tube to
the end of fan tube with bigger hole.
4. Align these holes, and Securing with the two Screws,
lock washers and flat washers removed at Step. 1. ( See figure 1)
NOTE: The screws must be fully tightened before the fan operating.
OPERATING INSTRUCTIONS
This fan comes fully assembled. No further assembly is needed.
TO ADJUST AIRFLOW UPWARD OR DOWNWARD:
Tilt fan head to the desired angle. The high velocity fan can be used alone or in conjunction with air conditioning.
How To Adjust Tilt
1. Insert knob to tilt nut.
2. Use knob to loose tilt nut by turning counter-clockwise.
3. Adjust fan head to tile you want.
4. Tightened the tilt nut by turning clockwise.
5. Keep knob for future use.
Tilt Nut
Kno
Figure. 1

3
SPEED CONTROL:
Rotate SWITCH to LOW (1), MEDIUM (2) AND HIGH (3) speeds for respective air velocity.
It is normal for the motor to feel warm to touch after continuous operation.
CLEANING INSTRUCTIONS
WARNING:
Unplug from electrical supply source before cleaning.After servicing, any safety device (including grilles and
blades) must be reinstalled or remounted as previously installed:
zUse soft damp cloth to clean. Then wipe with dry cloth.
zDo not use harmful cleaners.
zDo not bend the blades.
WARNING:
This product is not intended for use by persons (including children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction
concerning use of the product by a person responsible for their safety. Children should be supervised to ensure
that they do not play with the product.
If you should have any operation question, contact us toll-free at
1-888-372-8518

4
No. Part Name No. Part Name
1 KNOB 7 FAN BLADE
2 SWITCH BOX 8 BLADE PLASTIC NUT
3 ON/OFF SWITCH 9 FRONT GRILL
4 SWITCH BOX 10 LOCK NUT
5 MOTOR 11 PLASTIC TIGHTENER
6 REAR GRILL 12 STAND