Xtreme Garage HVP-20S User manual

1
20″HIGH VELOCITY
PEDESTAL FAN (2-IN-1)
MODEL HVP-20S
OWNER’S MANUAL
READ AND SAVE THESE INSTRUCTIONS.

2
CAUTION:
Read and follow all instructions before Operating Fan.
Do not use fan if any part are damaged or missing.
WARNING:
To reduce the risk of fire or electrical shock, do not expose to water or rain.
To reduce the risk of fire or electrical shock, do not use this fan with any solid state speed control device.
RULES FOR SAFE OPERATION:
zNever insert fingers or any other objects through the grille guard when fan is in operation.
zDisconnect the fan when moving from one location to another.
zDisconnect the fan when removing guards for cleaning.
zBe sure fan is on a stable, flat surface when in operation.
zDO NOT use fan in windows. Rain and moisture may create electrical hazard.
CAUTION: Do not alter the Fan’s assembly.
WARNING: Be sure FRONT and REAR GUARD screw are completely screwed down in locking position before operation.
INSTALLING AS STAND FAN
STAND ASSEMBLY:
1. Attach OUTER TUBE to the BASE with 4 screws as shown.
2. Loosen PLASTIC NUT on OUTER TUBE and
extend INNER TUBE to desired height.
3. Slide COVER RING down the OUTER TUBE to rest on top of the BASE.
CAUTION: The plastic nut must be fully tightened before
assembling the fan motor to the inner tube.
COLUMN/MOTOR ASSEMBLY INSTRUCTIONS:
Insert the fan at top of the INNER TUBE.
Then firmly tighten the screw at the hole of the fan holder.
INSTALLING AS FLOOR FAN
1. Attach SHORTER POLE to the BASE with the 4 screws as shown.
2. Insert the fan at the top of the SHORTER POLE.
3. Then firmly tighten the screw at the hole of the fan holder.
HIGH
V
ELOCITY FLOOR FAN OPERATING INSTRUCTIONS

3
OPERATING INSTRUCTIONS
TO ADJUST AIRFLOW UPWARD OR DOWNWARD: Tilt fan head to the desired angle. This high velocity fan can be
used alone or in conjunction with air conditioning. Rotating the fan head upward serves to pull air from the floor and circulate it
throughout the entire room.
How To Adjust Tilt
1. Insert knob to tilt nut.
2. Use knob to loose tilt nut by turning counter-clockwise.
3. Adjust fan head to tile you want.
4. Tightened the tilt nut by turning clockwise.
5. Keep knob for future use.
SPEED CONTROL: Rotate SWITCH to (0),(3), (2), (1)
speeds for respective air velocity. It is normal for the motor to feel warm to touch after continuous operation. This fan features a
thermal cutoff that will automatically shut off should it overheat for any reason. If this happens, immediately unplug the fan from
the outlet.
CLEANING
WARNING: Unplug from electrical supply source before cleaning:
zUse soft damp cloth to clean. Then wipe with dry cloth.
zDo not use a cleaning solution that s harmful to paints or plastics.
zDo not bend the blades.
zThe motor bearings are permanently sealed and do not require additional lubrication.
WARNING:
This product is not intended for use by persons (including children0 with reduced physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the product by a
person responsible for their safety. Children should be supervised to ensure that they do not play with the product.
If you should have any operation question, contact us toll-free at
1-888-372-8518
Tilt Nut
Knob

4
No. Part Name No. Part Name
1 KNOB 9 REAR GRILL
2 SWITCH BOX 10 METAL DRUM
3 ON/OFF SWITCH 11 FAN BLADE
4 SWITCH BOX 12 BLADE PLASTIC NUT
5 MOTOR 13 FRONT GRILL
6 BRACKET 14 POLE
7 LOCK NUT 15 PLASTIC RING
8 PLASTIC TIGHTENER 16 BASE