Xtreme Garage X-400WFK Assembly instructions

MULTIPURPOSE UTILITY AIR MOVER
OWNER’S MANUAL
X-400WFK (WITH FILTER KIT)
ITEM NO: 621-1531
TOLL FREE NO: 1-855-855-8868
PLEASE READ AND SAVE THESE INSTRUCTIONS

Index
Introduction............................................................................................................................... 2
Operation / Instructions.............................................................................................................. 3
Safety Instructions..................................................................................................................... 4
Maintenance Instructions / Troubleshooting.............................................................................. 5
Specifications............................................................................................................................. 6
Warranty.................................................................................................................................... 7
Parts List.................................................................................................................................... 8
Accessories................................................................................................................................ 9

Introduction
X-400WFK Air Movers are professional level and multipurpose with the most efficient
engineering design available. X-400WFK Air Movers are ETL certified.
Features:
.
• Low amp draw with high airflow velocity.
• Super quiet and super lightweight.
• Removable and washable Filter Kit.
• Convenient carrying handle.
• Stackable up to 4 units high.
• Quick to disassemble for thorough cleaning and service.
• 20 ft. cord with built-in cord wrap design.
• Safety screens on open vents.
• 3-speed switch.
• 4 positions (0°, 20°, 45°, 90°).
• Durable and rugged housing structure.
- 2 -

Operation / Instructions
- 3 -
The X-400WFK High Velocity Air Mover is intended to move air
and to dry floors, walls, furniture, etc. It is Durable and easy to
operate. The X-400WFK has an effective balance between static
pressure and airflow suitable for a variety of applications.
1. X-400WFK Air Movers are shipped ready to be put into
service. Prior to plugging in the unit into the power
source, inspect thoroughly for any shipping damage.
2. Plug the electrical cord into the power outlet.
3. Carefully place the Air Mover unit on a stable, flat dry
surface.
4. The unit has four-position capability to direct airflow across
flat surfaces or angled upward.
5. Turn the switch to desired speed and make sure it is
operating correctly.
6. All Air Movers in operation must be supervised at all times.
AIR MOVER
STORAGE:
Air Movers can be
stacked (up to4)
on their sides for
storage.
NOTICE:
1. Stacking
feature is not
secure for
transportation.
2. Remove the
filters before
stacking.
- 3 -

Safety Instructions
1. To prevent electric shock, do not operate unit in standing water. Never plug in or unplug the unit
with wet hands or while standing in water.
2. To avoid risk of injury, do not direct air flow towards face or body.
3. To reduce the risk of fire or electric shock, do not use the Air Mover with any solid-state
speed control device.
4. Use only with GFCI protected receptacles. Please contact a qualified electrician for verification
and/or installation of a GFCI receptacle if necessary.
5. Do not operate any unit with a damaged cord or plug.
6. Unplug the unit from the power source before servicing or cleaning.
7. Do not run the power cord under carpeting. Do not cover the power cord with throw rugs,
runners, or similar coverings. Place the power cord away from traffic area to prevent tripping.
8. Do not allow children to play with or around Air Mover.
9. Do not move or carry the Air Mover when unit is operating.
10.Air Mover in operation must be supervised at all times.
- 4 -

Maintenance Instructions
1.To keep the Air Mover clean, use a damp cloth to wipe the surface of the housing.
2.Never clean the Air Mover with water.
3. When not in use, unplug and store the Air Mover in a dry indoor place out of reach of
children.
4.Always disconnect the Air Mover from its power source before performing any maintenance
or cleaning.
5.Clean the filters as often as necessary to avoid loss of airflow.
Troubleshooting
For any problems not listed below, please contact 1-855-855-8868
PROBLEM
POSSIBLE CAUSE
SOLUTION
Air Mover not
running
No power input
Plug in the air mover; check circuit breaker
Switch not turned on
Turn on switch
Unit fan jammed
Remove material jamming fan wheel
Intake or exhaust blocked
Turn unit off and allow to cool,
then remove blockage
Air Mover vibrates
excessively
Accumulation ofdirton fan blade
Clean air mover blade
- 5 -

Model
X-400WFK
Volt / Cycle
115 V / 60 HZ
Power
1/4 HP
Max. Amp
3 Amps
Weight
16 Lbs.
Speeds
3 Speeds
Size (H x W x D)
15 x 13.5 x 15 in.
Cord Length
20 Ft.
Overheating Protection
Thermally Protected
Airflow (CFM)
1100 CFM
Positions
4 (0°, 20°, 45°, 90°)
Housing
ABS
Safety Marks
ETL
Filter Kit
Included
Specifications
- 6 -

X-400WFKLimited Warranty
- 7 -
If, during normal use, this Xtreme Garage® product breaks or fails due to a defect in
material or workmanship, simply return the product to a Menards® retail store within 1
year from the original date of purchase for a free replacement of the same or similar
Xtreme Garage® product. This warranty: (1) excludes expendable parts; (2) shall be void
if this product is used for commercial and/or rental purpose; and (3) does not cover any
loses, injuries to persons/property or costs. This warranty does give you specific legal
rights and you may have other rights, which vary from state to state.
Important!
Warranty does not cover signs of misuse including, but not limited to, a unit that has been
dropped, subjected to water damage, tampered with, improper voltage use and
unauthorized maintenance and repairs. The POWER CORD and FILTERS are not
covered by the warranty.

X-400WFK PARTS LIST
17
- 8 -
Item No
Parts Description
Item No
Parts Description
400-1
Left Housing
400-2
Grid Cover (Motor Side)
400-3
Switch Panel
400-4
Switch Knob
400-5
Switch
400-6
Motor
400-7
Right Housing
400-8
Power Cord
400-9
Fan
400-10
Grid Cover (Fan Side)
400-11
Air Outlet Grid Cover
400-12
Kick Stand
400-13
Filter (Motor Side)
400-14
Filter (Fan Side)
400-15
Rubber Feet (not shown)
400-16
Screws and nuts (Not Shown)
400-17
Capacitor

Accessories
Filters (Included)
A Filter Kit is included with the X-400WFK Air Movers which will help prevent small debris
and dust from entering the unit. To clean the filters: remove filters from the unit and
wash with warm soapy water, rinse with clean water and let dry thoroughly before
reinstalling.
- 9 -