XTS MD1080PF-HDS User manual

User Manual
Warnings and Cautions
■Disclaimer
This manual may contain several technically incorrect places or printing
errors. The updates will be added into the new version of this manual.
The content is subject to change without notice.
■Avoid Electric Shock
To prevent electric shock, do not remove screws or cover.
■Avoid excessive moisture
Do not use strong or abrasive detergents when cleaning camera body.
Clean with dry cloth or mild detergent, wiping gently.
■Do not use camera beyond prescribed voltage range.
Only use included power supply. Ensure power input source conforms
to local voltage. Voltage outside of range could cause damage or
abnormal performance.
■Termly Inspection
A few parts of the device shall be replaced regularly due to their
average enduring time.
■Never attempt to disassemble the camera privately.
It may result in internal components damaged.
Use only under temperature conditions
between -40°C and +70°C.Provide
good ventilation whenusingin high
temperatureconditions.
HD SDome Camera
Thank you for purchasing our HDS camera. Please read this manual
carefully for correct use of the product and keep it for reference purposes.
Do not drop the camera or subject it to
physical shock.
It may cause production malfunction.
Do not aim camera at sun or extra
bright place.
Strong light will degrade image quality
and could cause damage.
Avoid touching the camera lens.
The lens is the most important component
of the camera. Be careful not to smear it
with fingerprints.
Page 1 Page 2
Page 3 Page 4
Components and Accessories
Overview
Connecting to Monitor
Do not place the camera in extreme hot
or cold environment.
1
2
3
Mounting Base
Lower Dome
Power Cable
Video Cable
4
Connecting to Power
Connect the adapter to the power input connector in accordance with the
camera. The recommended adapter specification for the camera is
DC12V.
Video
HDMI
VGA
HDS DVR Monitor
1
2
3
4
DC12V
Power
Camera
User manual
Drill Template
Screwdriver
Screws
XTS CORP - Headquarters
Product Development Dpt.
www.xtscorp.com
XTS CORP - Headquarters
Product Development Dpt.
www.xtscorp.com

*Before you start, please make sure that the wall or ceiling is strong enough to
withstand three times the weight of the camera.
* This installation should be made by a qualified service person and should
confirm to all local codes.
Model
Image Sensor
Pixels
Signal System
Min. Illumination
Lens
IR Visible Distance
IP Rank
Video Out
Resolution
Frame Rate
ICR
DNR
S / N Ratio
Electronic Shutter
AGC
White Balance
Power
Temperature
Humidity
Dimension ( mm )
MD1080PF-HDS
1 / 3'' CMOS
PAL / NTSC
0 Lux ( LED ON )
3.6 mm
No ( 10 ~ 20m optional)
IP66
BNC x 1
1080P (1920 x 1080 )
30fps ( 60Hz ), 25fps ( 50Hz )
Yes
Yes
> 52dB ( AGC OFF )
Yes
Auto White Balance
DC 12V ± 10%
- 40°C~70°C
10% ~ 90%
Ø116 x 91
1 / 50s ~ 1 / 67500s
Correct Disposal of This Product
If the camera no longer functions or can no longer be repaired, it must be disposed
of according to regulations reading electronic waste. By not disposing of electronic
items in household waste you will not only be following the law, but contributing
the protection of the environment.
Page 8
Page 7
Page 6
Page 5
Installation
Features Specications
1. Attach the drill template to the place where you want to fixthe
cameraandthendrill 4 screw holes and 1 cable hole (if you want
to route the cables through the mounting base) according to the
drill template.
2. Loosen the screws to open the lower dome.
3. Route the cable and connect the power cable and the video cable.
Then secure the camera to the ceiling or wall with the screws.
4. Install the lower dome back to the camera and fix it with the screws.
5. Remove the protection film softly to finish the installation.
Installation
1280 x 720 1920 x 1080
This series of cameras adopt the latest HDStechnology and advanced
circuit design, feature high definition and sensitivity, low noise and
distortion and support HD video transmission with the common coaxial
cable, ensuring the requirement of the HD monitoring in the traditional
surveillance system.
●High Transmission Performance
Real-time transmission with high speed and long distance.
●ICR Auto Switch
The filter will filter infrared light during the daytime and change to
normal at night to ensure a high sensitivity and clear image.
●Color-B/W Auto Switch
The camera will display color image in daytime and become
monochrome automatically at night.
●Auto White Balance
Adjust the color temperatureaccordingto the environment
automatically.
●DNR
Reduce noise from brighteness andcolorsignal to savestorage
room underlow illuminationcondition.
●High Resolution
Adopt high performance HDSsensor, providing high definition and
clear image, up to 720P/1080P resolution.
XTS CORP - Headquarters
Product Development Dpt.
www.xtscorp.com