YAKUMO LCD TV 38F User manual

Handbuch
Manual
Manuel
Yakumo LCD TV 38F
LCD TV
DF
GB

TABLE OF CONTENTS
PRECAUTIONS ……………………………………….……………1
OSD MANUAL ………………………………………………………1
REMOTE CONTROLLER ………………………………………….2
Illustration of the keys on the remote control …………………….3
Menu picture................................................................................4
Input mode PC ............................................................................4
Input mode AV / Scart / S-Video……………………………………5
Input mode TV………………………………………………………..6
CONNECT PERIPHERAL EQUIPMENT …………………………8
Production Specifications …………………………………………..9
Maintaining your TV…………………………………………………10
Troubleshooting……………………………………………………..11
Thank you very much for choosing the LCD TV.
We recommend that you take a few minutes to read carefully through
this
manual before installing and switching on the TV. Please keep this
manual in a safe place for your future reference.
IMPORTANT NOTICE FOR THE END USER – WEEE
DIRECTIVE 2002/96/CE AND SUBSEQUENT MODIFICATION
2003/108/CE CONCERNING THE WASTE OF ELECTRICAL &
ELECTRONIC EQUIPMENTS
According to “WEEE” Directive 2002/96/CE and subsequent modification
2003/108/CE this equipment has been marked with the above crossed waste bin symbol.
For a future disposal for this equipment, please following instructions:
•It is forbidden to dispose of this equipment as a normal urban
waste: it is necessary to contact one of the WEEE (Waste of Electric
and Electronic Equipments) Authorised Centres licensed by the
Public Administration. It will be possible to deliver this waste
equipment to the dealer for its disposal if you will purchase a new
equivalent equipment.
•Above directive, for which we recommend to study the whole
norms, states that economic sanctions will be charged for
unauthorised disposal of WEEE (Waste of Electric and Electronic
Equipments).

UPrecautions
1. Read all of these instructions and save this manual for later use.
2. Follow all warnings and instructions on the product.
3. Do not cover or block the ventilation holes in the case.
4. Do not insert sharp objects or spill liquid into the LCD TV through the
cabinet slots; this may cause accidental fire, electric shock or failure.
5. Unplug the unit when not in use for an extended period of time.
6. Do not attempt to service this product yourself, as opening or removing
the cover may expose you to potential electric shock, only a qualified
technician should service this product.
7. Do not touch the screen directly with your fingers as it may damage
the screen; the oil from your skin is difficult to remove.
8. Do not apply pressure to the screen, the LCD screen is very delicate.
9. Keep the TV away from extreme heat, cold or humid places.
10. Do not place directly under sunlight, dusty surroundings or near
equipment, which may generate strong magnetic fields.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVECOVER(OR OPEN THE PLASTIC CASE)
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
OSD Manual
Control Panel:
These buttons control your TV’s basic features
i
1

Control Panel Functions:
1- INPUT –Select the input signals
2- ESC –Exit
3- MENU –Enter into MENU / ENTER
4- ＜VOL –Volume down / Left orientation
5- VOL＞–Volume up / Right orientation
6- <PRO –TV channel down change channels on sequence
7- PRO> –TV channel up
8- POWER –Power supply switch /turn on/off the LCD TV
Remote control
-Remote control
2

- Illustration of the keys on the remote control:
3
1. POWER Power supply switch
2. INPUT Select TV / SCART / PC / AV / S-VIDEO
3. ESC Exit
4. MENU MENU / ENTER
5. MUTE MUTE
6. ＜VOL Volume down / Left orientation
7. VOL＞Volume up / Right orientation
8. CH+ TV channel up
9. CH- TV channel down
10.AUTO AutoAdjust (PC MODE)
11.0-9 TV channel number select or teletext
page number select
12. -/-- One bit or two bit TV channel select
13. DISPLAY Display current TV channel or cancel
14. RETURN Quick TV channel switch
15. NICAM/A2 NICAM / GERMAN Stereo select
16. SYSTEM TV System select
17. PAGE UP Increase the teletext page number by one
18. PAGE DN Decrease the teletext page number by one
19. PMODE STANDARD/MILD/FRESH/PERSONAL
20. SMODE PERSONAL/VOICE/MUSIC/THEATER
21. TEXT Switch to theTeletext with text mode , and
cancel text mode
22. HOLD Hold on or off for current page display
23. INDEX Request index page.
24. SIZE Change teletext display size.
25. REVEAL Reveal or hidden the hidden words
26. SUBPAGE Sub coded page access
27. RED
28. GREEN
29. YELLOW
TELETEXT
30. CYAN
Correspond to the differently colored
subjects
33. SLEEP 1-240 S

Menu picture
Input mode PC
1- Press MENU button to either display the “PC” or “AUDIO”or
“GENERAL” menu.
2- Press KEY CH+/CH-to scroll through the parameters
3- Press ＜VOL/VOL ＞buttons to make changes to the
parameters
4- Press the ESC button to exit the menu
4
Name of
submenu Picture of
submenu Instructions
PC MENU
1、Brightness : Adjust the brightness of
the picture,the image becomes brighter
as the number increase.
2、Contrast:Adjust the contrast of the
picture,the image becomes higher as
the number increase.
3、Colour setting: Select between
9300k/6500k/user define
4、Auto config:.
5、H-POSITION: Picture horizontal
position adjust
6、V-POSITION: Picture vertical position
adjust.
7、Phase: Removes any horizontal distortion
and clears or sharpness the displayed
characters.
8、Clock: Adjust the TFT-LCD to match the
videoinputsource.
AUDIO
MENU
1、Volume: Adjust the volume.
2、Balance: Adjust the balance of the
audio output from left to right.
3、Audio Preset: Four different settings:
Personal, Voice, Music and Theatre.
4、Treble: Adjust the treble of the sound,
can only be adjust under Personal mode
5、Bass: Adjust the bass of the sound,
can only be adjust under Personal
mode
GENERAL
MENU
1、Language: Change the language of
the menu, choose between
Languages
2、Blue screen: Display the blue screen
when no signal.
3、Noise reduction: Reduce the noise of
the picture, provide clearer picture.
4、Input source: Display the current
mode.
5、Reset: Resets picture settings to the
factory default .

Input mode AV / Scart / S-Video:
1- Press MENU button to either display the “VIDEO” or “AUDIO”or “GENERAL”
menu.
2- Press KEY CH+/CH- to scroll through the parameters
3- Press ＜VOL / VOL ＞buttons to make changes to the parameters
4-Press the ESC button to exit the menu .
Name of
submenu Picture of submenu Instructions
VIDEO MENU
1、Brightness : Adjust the
brightness of the picture ,the image
becomes brighter as the number
increase.
2、Contrast: Adjust the contrast
of the picture, the image
becomes higher as the number
increase.
3、Colour :Adjust the colour.
4、Hue :Adjust the tone of the
picture. Will appear and be
adjusted only under NTSC mode.
5、Sharpness :Adjust the amount
of detail enhancement.
AUDIO MENU
1、Volume: Adjust the volume.
2、Balance: Adjust the balance
of the audio output from left to
right.
3、Audio Preset: Four different
settings: Personal, Voice, Music
and Theatre.
4、Treble: Adjust the treble of the
sound, can only be adjust under
Personal mode
5、Bass: Adjust the bass of the
sound, can only be adjust
under Personal mode
GENERAL
MENU 1、Language: Change the
language of the menu, choose
between Languages
2、Blue screen: Display the blue
screen when no signal.
3、Noise reduction: Reduce the
noise of the picture, provide clearer
picture.
4、Input source: Display the
current mode.
5、Reset: Resets picture settings
to the factory default .
5

Input mode TV
1- Press MENU button to either display the “VIDEO” or
“AUDIO” or “TV” or “GENERAL” menu.
2- Press KEY CH+/CH- to scroll through the parameters
3- Press ＜VOL / VOL ＞buttons to make changes to the
parameters
4- Press the ESC button to exit the menu .
Name of submenu Picture of submenu Instructions
VIDEO MENU
1、Brightness : Adjust the
brightness of the picture, the
image becomes brighter as
the number increase.
2、Contrast: Adjust the
contrast of the picture,the
image becomes higher as
the number increase.
3、Color :Adjust the color .
4、Hue :Adjust the tone of
the picture. Will appear and be
adjusted only under NTSC
mode.
5、Sharpness: Adjust the
amount of detail enhancement,
the image sharpness rises as
the number increase.
AUDIO MENU
1、Volume: Adjust the volume.
2、Balance: Adjust the
balance of the audio output
from left to right.
3、Audio Preset: Four different
settings: Personal, Voice,
Music and Theatre.
4、Treble: Adjust the treble of
the sound, can only be adjust
under Personal mode
5、Bass: Adjust the bass of
the sound, can only be
adjust under Personal
mode
6

7
Name of submenu Picture of submenu Instructions
TV MENU
1、Channel: Change the TV
channel.
2、System: Select the TV
standard.
3 、Skip ：If you
want skip a channel, you
can turn it on and this channel
will be skip in the next time.
4 、AFC: Auto
frequence control.Press the
button improve the image
quality
5、Fine tune：If the image
received is not very good,you
can press PRO to select Fine
Tuning item in menu.Then,press
VOL button to adjust and
improve the image quality.
6、Manual Search：Manual
search the channel.
7、Auto search：Auto search
and save the channel
GENERAL MENU
1、Language:Change the
language of the menu,
choose between Languages
2、Blue
screen:Display the blue
screen when no signal.
3、Noise reduction:Reduce the
noise of the picture, provide
clearer picture.
4、Input source:Display the
current mode.
5、Reset: Resets picture
settings to the factory default

CONNECTION AND PREPARATION
Remove the back plate at the back of the TV as shown on the
illustration opposite. Lay the LCD TV with the screen down on a
table, as it will be easier to connect your peripheral equipment.
Please take precaution not to damage thescreen.
1: RF TV port
2: S-videoport
3: A/V video input port
4: Left channel input port
5: Right channel input port
6: PC signal port
7: PC AUDIOINPUT port
8: Scart port
9: 12V power input port
10: COAX port 8
CDAXDCSCARTPC INVGALRVIDEOS-VIDEOTUNER
12345 6 7 8 91
0

Production Specifications:
Cell Type Color active matrix TFT (Thin-Film-
Transistor) LCD panel
Active size 15 inch
Display Area 304(h) x 228 (v) MM
resolution XGA 1024(H) X 768(V)
Pixel Pitch 0.297 x 0.297
Brightness / Contrast 160 nit/ 300:1
Viewing Angle 45 (L/R) 50 (U/D)
Panel spec
Response Time 25ms
Color System PAL/SECAM
TV System NICAM/A2 Stereo SI
Progressive Scanning SI
Color Tint Control SI
Digital Comb Filter SI
Picture
Picture Mode Normal/cold/warm/user
Speaker Output(RMS) 2X3W
Sound Sound Mode VOICE/MUSIC/THEATER/PERSONAL
Sleep Timer Yes
Blue Background Yes
On-off Sound Yes
STERO Yes
Teletext Yes
Plug &Play Yes
Features
Remote control Yes
TV Antenna Yes
S-Video in Yes
A/V(Composite) in Yes
Europe SCART(1only ) Yes
PC (VGA) In Yes
PC Audio In Yes
Terminal\
Audio Out Yes
On working <36WPower
Consumption Stand By <5W
Accessories Remote control, Scart cable, user manual ,Composite cable, Adapter ,power cord
Net weight 4kg
Gross weight 5kg
Original size 494X170X360MM
Packing size 560x190x390mm
9

Maintaining Your TV
Periodically cleaning the exterior of your TV can reduce the chance of
dust being collected which can block the ventilation holes; hence,
prolonging the life of your TV. Please refer to the instructions below for
cleaning your TV:
1. Unplug the power
Unplug the LCD TV from the wall outlet before cleaning the TV.
2. Avoiding water and liquid
Never spray or pour any liquid directly onto the screen or case. Avoid
allowing any water or liquid from entering the LCD TV or accessories.
3. Cleaner
Use water or non-ammonia/non-alcohol based glass cleaner. Do not use
harsh or abrasive cleaners such as ketene(acetone), ethanol, toluene,
acetic acid, methane, chloride, or other detergents to clean the TV, these
chemicals can damage the LCD TV.
4. Screen
To clean your LCD TV screen, use water or a mild cleaner, as listed above.
Moisten a soft, clean cloth. If possible, use a special screen clearner
sheet or a solution suitable for static electrical appliances. Using any
cleaner other than water or a mild cleaner may damage your TV and will
not be covered under the warranty.
5. Storage of unit
If the LCD TV is not in use for a long time, please unplug it and store it in
its original box to avoid any damage.
6. Disclaimer
Any damage resulting from use of any cleaner that is not mentioned
above is not covered under the terms of the warranty on this product.
Warning: To prevent electrical shock, do not open the LCD TV casing.
Leave repairing of the TV to qualified personnel; please refer to the
Warranty for tech support information.
10

Troubleshooting
When there is no picture or sound
‧Make sure theAC adapter is properly inserted in the
Power outlet.
• Reception other than those of
broadcasting stations can be considered.
• Make sure the input mode is set to TV.
• Make sure the main power switch of
the main unit is on.
When there is no picture from AV.
‧Make sure the BLACK LEVEL is
properly adjusted.
‧The fluorescent lamp may have
reached the end of service life.
‧Make sure the video I/P
terminal is not free of
connections.
When there is no sound.
‧Make sure the volume is not set to
minimum.
‧Make sure the sound is not set to
mute.
‧Make sure that headphones are not
connected.
When there is no picture or sound, just noise.
‧The reception may be weak.
‧The state of the broadcast may also
be bad.
‧Make sure the antenna is not
disconnected.
11

When there picture is not clear.
‧The reception may be weak.
‧The state of the broadcast may also
bad.
‧Make sure the antenna is not
disconnected.
When the picture is light or improperly tinted.
‧Check color adjustment.
‧Check color system setting.
When there picture is too dark.
‧Press the Brightness button.
‧Check PICTURE and BLACK LEVEL
adjustment.
‧The fluorescent lamp may have
reached the end of service life.
When there remote control does not work.
‧Check the batteries of the remote controller.
‧Make sure the remote sensor window is
not under strong fluorescent lighting.
‧The fluorescent lamp may have reached
the end of service life.
12

When the picture is not sharp.
‧The reception may be weak.
‧The state of the broadcast may also
be bad.
‧Make sure the antenna is not
disconnected.
When the picture moves.
‧The reception may be weak.
‧The state of the broadcast may also
be bad.
‧Make sure the antenna is not
disconnected.
When the picture is doubled or tripled.
‧Make sure the antenna is facing the
right direction.
‧There may be reflected electric
waves from mountains or buildings.
The picture is spotted.
‧There may be interference from
automobiles, trains, high voltage lines,
neon light, etc.
‧There may be interference between the
antenna cable and power cable. Try to
pull them further apart.
13

LCD TV USER MANUAL
When there are stripes on the screen or colors fade.
‧Is the unit receiving interference from other
devices?
‧Transmission antennas of radio
broadcasting station and transmission
antennas of amateur radio and cellular
phones may also cause interference.
‧Use the units as far apart as possible
from device that may cause possible
interference.
14

www.yakumo.com