Yamagata LED19HDRAB1 User manual

Before connecting, operating or adjusting this product, please read the manual completely.
Please keep this manual for future reference.
LED19HDRAB1
LED TV
Operating Manual
液晶电视
使用说明书
请妥善保存使用说明书，以备日后查阅。
安装、使用产品前，请仔细阅读使用说明书。

Table of Contents
Important Safety Precautions..........................................................................................................................1
Important Notice............................................................................................................................................3
Preparations....................................................................................................................................................4
Identification of Controls ................................................................................................................................5
Connections....................................................................................................................................................8
Basic Operations...........................................................................................................................................11
Memorizing the Channels .............................................................................................................................14
PVR Recording..............................................................................................................................................17
Channel and program Selection....................................................................................................................21
Clock and Timer Setup ................................................................................................................................28
Teletext & Subtitle
Specifications ................................................................................................................................................40
Installing the stand.........................................................................................................................................41
Picture Adjustment .......................................................................................................................................22
Sound Adjustment.........................................................................................................................................23
Option Setup ................................................................................................................................................25
Rating and Lock Setup ..................................................................................................................................26
........................................................................................................................................30
Adjusting the Computer Image & Setting Hotel Mode ................................................................................31
Using USB Multi Media Player......................................................................................................................32
Troubleshooting............................................................................................................................................39

1
Important Safety Precautions
Electrical energy can perform many useful functions, but it can also cause personal injuries and property damage if improperly
handled. This product has been engineered and manufactured with the highest priority on safety. But IMPROPER USE CAN
RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARD. In order to prevent potential danger, please read the
following instructions when installing, operating and cleaning the product. To ensure your safety and prolong the service life of
your new TV product, please read the following precautions carefully before using the product.
1. Read these instructions---All operating instructions must be read and understood before the product is operated.
2. Keep these instructions---These safety and operating instructions must be kept in a safe place for future reference.
3. Heed all warnings---All warnings on the product and in the instructions must be observed closely.
4. Follow all instructions---All operating instructions must be followed.
7.Power cord protection---Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
Note: where the mains plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain
readily operable.
5. Attachments ---Only use attachments/accessories specified by the manufacturer. Do not use attachments not
recommended by the manufacturer. Use of improper attachments can result in accidents.
8.Overloading---Do not overload wall outlets, extension cords, or convenience receptacles on other equipment as this can
result in a risk of fire or electric shock.
6. Power source---This product is intended to be supplied by a listed power supply indicated on the marking label. If you are
not sure of the type of power supply to your home, consult your product dealer or local power company. For added
protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it
from the wall outlet and disconnect the cable system. This will prevent damage to the product due to lightning and power line
surges. When the unit has to be used with another power supply voltage, the power cable must be changed. Consult your
product dealer. The socket outlet should be installed near the equipment and easily accessible. Use only the power cord
designated by our dealer to ensure safety and EMC. When connecting other products such as VCRs and personal computers,
you should turn off the power of the unit for protection against electric shock.
9.Entering of objects and liquids---Never insert an object into the product through vents or openings. High voltages are
present in the product, and inserting an object can cause electric shock and/or short internal parts. For the same reason, do
not spill water or liquid on the product.
10. Servicing---Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged
in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
11.Damage requiring service---If any of the following conditions occurs, unplug the power cord from the AC outlet, and
request a qualified service person to perform repairs.
a. When the power cord or plug is damaged.
b. When a liquid is spilled on the product or when objects have fallen into the product.
c. When the product has been exposed to rain or water.
d. When the product does not operate properly as described in the operating instructions.
Do not touch the controls other than those described in the operating instructions. Improper adjustment of controls not
described in the instructions can cause damage, which often requires extensive adjustment work by a qualified technician.
e. If the product has been dropped or the cabinet has been damaged in any way.
f. When the product displays an abnormal condition or exhibits a distinct change in performance. Any noticeable abnormality
in the product indicates that the product needs servicing.
12. Replacement parts---In case the product needs replacement parts, make sure that the service person replaces parts
specified by the manufacturer, or those with the same characteristics and performance as the original parts. Use of
unauthorized parts can result in fire, electric shock and/or other danger.
13. Safety checks---Upon completion of service or repair work, request the service technician to perform safety checks to
ensure that the product is in proper operating condition.
14. Wall or ceiling mounting---When mounting the product on a wall or ceiling, be sure to ask a authorized service
personnel to carry out setup. This is a safety feature.

Important Safety Precautions (Continued)
2
15. Stand---Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. Do not place the product on an unstable
trolley, stand, tripod or table. Placing the product on an unstable base can cause the
product to fall, resulting in serious personal injuries as well as damage to the product.
When mounting the product on a wall, be sure to follow the manufacturer’s instructions.
Use only the mounting hardware recommended by the manufacturer.
16.Careful move---When a cart is used, use caution when moving the cart/apparatus
combination to avoid injury from tip-over. Sudden stops, excessive force and uneven
floor surfaces can cause the product to fall from the trolley.
Never attempt to move the TV unless the AC power cord has been disconnected.
17. Lightning---Unplug this apparatus during lightning storms or when unused for long
periods of time.
For added protection for this television equipment during a lightning storm, or when it is
left unattended and unused for long periods of time, unplug it from the wall outlet and
disconnect the antenna. This will prevent damage to the equipment due to lightning and
power-line surges.
18. Do not use this apparatus near water---for example, near a bathtub, washbowl,
kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, and the like.
Do not use immediately after moving from a low temperature to high temperature
environment, as this causes condensation, which may result in fire, electric shock, or
other hazards.
The apparatus shall not be exposed to dripping or splashing and that no objects filled with
liquids, such as vases, shall be placed on the apparatus.
19. Clean only with dry cloth---Unplug this product from the wall outlet before
cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
20. Ventilation---Do not block any ventilation openings. Install in accordance with the
manufacturer instructions. The vents and other openings in the cabinet are designed for
ventilation. Do not cover or block these vents and openings since insufficient ventilation
can cause overheating and/or shorten the life of the product. Do not place the product on
a bed, sofa, rug or other similar surface, since they can block ventilation openings. This
product is not designed for built-in installation; do not place the product in an enclosed
place such as a bookcase or rack, unless proper ventilation is provided or the
manufacturer’s instructions are followed.
21.Heat sources---Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
22.Panel protection---The display panel used in this product is made of glass.
Therefore, it can break when the product is dropped or impacted upon by other objects.
Be careful not to be injured by broken glass pieces in case the display panel breaks.
23.Pixel defect---The display panel is a very high technology product, giving you finely detailed pictures. Occasionally, a few
non-active pixels may appear on the screen as a fixed point of blue, green or red. Please note that this does not affect the
performance of your product.
Warning:
For continued safety, apparatus with class I construction shall be connected to a mains socket outlet with a protective
earthing connection.
To prevent the spread of fire, keep candles or other open flames away from this product at all times.
24.Environment---Do not throw away the appliance with the normal household waste
at the end of its life, but hand it in at an official collection point for recycling. By doing this,
you help to preserve the environment.

Important Notice
3
About After-Image The extended use of fixed image programme material can cause a permanent
on the screen.
This background image is viewable on normal programs in the form of a stationary fixed
image. This type of irreversible screen deterioration can be limited by observing the
following steps:
A. Reduce the brightness/contrast setting to a minimum viewing level.
B. Do not display the fixed image for extended periods of time.
C. Turn the power off when not in actual use.
Important Information Regarding Use of Video Games, Computers,
Captions or Other Fixed Image Displays.
after-
image
!Do not allow a still picture to be displayed for an extended period, as this can cause a
permanent after-image to remain on the screen.
Examples of still pictures include logos, video games, computer images, teletext and
images displayed in 4:3 mode.
CAUTIONS:
!The permanent after-image on the screen resulting from fixed image use is not an
operating defect and as such is not covered by the warranty.
!This product is not designed to display fixed images for extended periods of time.
Cleaning and
Maintenance
To clean this unit, wipe with a soft, dry cloth.
If the surfaces are extremely dirty, use a soft cloth dipped in a soap and water solution or
a weak detergent solution.
!
!
!
Use eyeglass cleaner to remove stubborn dirt from the screen.
Never use alcohol, paint thinner or benzine to clean this unit.
Before using a chemically treated cloth, read the instructions that came with the
cloth carefully.
About Location/
Environment
Do not use in hot and cold rooms (locations)
!When the unit is used in rooms (locations) with low temperature, the picture may
leave trails or appear slightly delayed. This is not a malfunction, and the unit will
recover when the temperature returns to normal.
!Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location
exposed to direct sunlight or near a heater, or in high humidity, as this may cause the
cabinet to deform and the to malfunction, and affect the TV’s performance .screen
!Environment condition:
Operating temperature: 5°C – 35°C
Operating humidity: 20 – 80 % ( no moisture condensation )
Storage temperature: 0°C – 45°C
Storage humidity: 10 – 80 %
Atmospheric pressure: 86 kPa ~106 kPa

<Use the remote control by pointing it towards the remote sensor window of the
set. Objects between the remote control and sensor window may prevent proper
operation.
Cautions regarding use of remote control
<Do not expose the remote control to shock. In addition, do not expose the remote
control to liquids, and do not place in an area with high humidity.
<Do not install or place the remote control under direct sunlight. The heat may cause deformation
of the unit.
<The remote control may not work properly if the remote sensor window of the main unit is under direct sunlight or strong
lighting. In such a case, change the angle of the lighting or the TV set, or operate the remote control closer to the remote
sensor window.
If the remote control fails to operate the TV functions, replace the batteries in the remote control.
Precaution on battery use
Improper use of batteries can result in a leakage of chemicals and/or explosion. Be sure to follow the instructions below.
<If the remote control is not used for an extended period of time, remove the batteries from the remote control.
<Place batteries with their terminals corresponding to the (+) and (–) indications.
<Different types of batteries have different characteristics. Do not mix batteries of different types.
<Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries and/or cause old
batteries to leak chemicals.
<Remove batteries as soon as they are non-operable. Chemicals that leak from batteries can cause a rash. If chemical
leakage is found, wipe with a cloth.
<The batteries (battery pack of batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like.
Open the battery cover.
1
<(Place the batteries with their terminals corresponding to the (+) and (–) indications in the battery compartment.)
Insert two size-AAA batteries.
2
Replace the cover.
3
Preparations
Using the Remote Control
Installing the Batteries
4
30
30
5m
TTX Subtitle
Size
Index
Mix
P.MODE
S.MODE
FREEZE FAV.LIST
TV/RADIO
ASPECT
INFO
T.SHIFT
REC.LIST
CH LIST
INPUT
MUTE
OK

5
Main Unit
Identification of Controls
Functions of VOL+/-, CH / , MENU, POWER and INPUT are also provided to the remote control. This operation
manual provides a description based on operating functions with the remote control.
1. Remote Sensor.
2. Indicator.
Lights blue when your TV is turned on. Lights red when your TV is in standby mode. Off when power cord is
unplugged.
3. MENU
Press this button to access the MENU main page.
4. INPUT
To access input source menu.
5. VOL+/-
Press the VOL+ or VOL- button to directly increase or decrease the sound volume level;
In OSD Menu, press these buttons to adjust the value or setting of each item.
6. CH /
Press these two buttons to directly change the TV channel;
In OSD Menu, press these buttons to choose the OSD items.
7. POWER
Press this button to turn the unit ON from STANDBY mode. Press it again to turn the set back to STANDBY.
Note：
2
1
MENU
INPUT
VOL
CH
3
4
5
6
7

6
Main Unit
Identification of Controls (Continued)
1. AV inputs (Video, Audio L, R)
Receive video/audio signal from external sources such as VCR or DVD player.
2. COMPONENT inputs
Connect to the audio and component output jacks of a DVD player or Set-Top Box.
3. USB port
Connect a USB device to this port.
4. RS-232 interface
For service use . The user cannot operate the unit through this terminal.
5. S/PDIF digital audio out terminal
Connect to the digital audio input of a digital audio component.
6. Headphone jack
Connect to your headphones.
7. HDMI interface
To connect with those equipments with HDMI or DVI interface, for example, Set-top box or DVD player. (A
HDMI-to-DVI adapter cable is required when you are connecting a DVI-equipped device to this TV.)
8. PC input
Connect to the D-Sub/AUDIO output jack on your computer.
9. Antenna input
Connect to your cable system or outdoor antenna.
12
4
3
5
6
7
8
9
AUDIO
L RVIDEO
AV IN
COMPONENT IN Y PBPR
USB
D-Sub
HDMI
RF PC IN
AUDIO
RS-232
S/PDIF
MAX 500 mA

Remote Control Unit
Identification of Controls (Continued)
7
1
3
4
6
7
8
9
2
5
10
12
11
13
14
17
18
19
21
16
15
20
23
24
25
26
27
28
22
1 POWER : Switches the TV power on or Standby.
2 FREEZE: To freeze current picture.
3 TV/RADIO: Switches between TV and Radio mode. (Only for
model with radio function)
4 0 – 9 number buttons: Press to enter channel numbers or input
password.
5 ASPECT: Selects the screen size.
6 5/6/3/4/OK: Press the arrows to navigate through the menus
or adjust an item. Press OK to confirm a selection or enter a sub-
menu.
7 MENU: Open the main menu or return to the previous menu.
8 EPG: Displays the Electronic program Guide (DTV only).
9 INPUT: Displays input source menu.
10 CH LIST: Displays the channel list.
11 VOL+/–: Increases or decreases the volume.
12 Teletext control buttons/ Coloured functional buttons
13 REC.LIST: Displays Recorded List.
: To return to select other media type.
14 INFO: Displays the information banner.
15 FAV.LIST: Displays the favorite channel list.
16 : Returns to the previous channel.
17 EXIT: Exits the menu screen.
18 STEREO: Selects bilingual, stereo or mono ( ATV only ), or
audio track(DTV only).
19 S.MODE: Selects sound mode.
20 P.MODE: Selects picture mode.
21 MUTE: Mutes the sound.
22 CH / : Changes channel up and down.
23 : Plays the previous.
24 : Plays the next.
25 : Fast reverse.
26 : Fast forward.
27 : When watching digital TV programs, press this button to
record a program or stop recording. In USB mode, press this
button to stop playing.
28 T.SHIFT: Press this button to time shifting.
: Play or pause.
TTX Subt itle
Size
Index
Mix
P.MODE
S.MODE
FREEZE FAV.LIST
TV/RADIO
ASPECT
INFO
T.SHI FT
REC.LIST
CH LIST
INPUT
MUTE
OK
Note:
=
In different mode, some buttons may have different function.

US B
D- Sub
HD MI
RF PC I N
AUDI O
RS -23 2
S/ PDI F
MAX 5 00mA
US B
HD MI RS -2 3 2
S/ PD IF
MAX 5 00mA
=When connecting an external device to the TV, make sure that the TV and the device are turned off.
=Check the plugs on the ends of cables to make sure that they are the correct type before you try plugging them into jacks on
the TV.
=Make sure that all plugs are securely inserted into the jacks. Loose connections can result in image or color problems.
=The illustration of the external device may be different depending on your model.
=Refer to the operating manual of the external device as well.
·Connect one end of your antenna cable to the RF jack on the side of
the TV, then connect the other end of the cable to the antenna wall
jack.
Note:
=It is recommended that the 75-ohm coaxial cable be used to eliminate
interference and noise which may occur due to radio wave conditions.
=The antenna cable should not be bundled with the power cord and the like.
75-ohm coaxial cable
(round cable)
Connections
8
Cautions Before Connecting
Antenna connection
Plug the AC power cord into a power outlet.
=This product should be operated only from the type of power source indicated on the marking label at the back of the cabinet.
=Always unplug the AC cord from power outlet when not using for a long period of time.
Power Connection
Note:
For a full Home Theater sound experience, you must connect
your digital sound system to the S/PDIF OUT jack on the TV.
S/PDIF IN
Digital sound system
TV Side
Or
Digital sound system connection
TV Side
RF

US B
D- Su b
HD MI
RF PC I N
AUD IO
RS -2 32
S/ PD IF
MAX 5 00mA
Connections (Continued)
9
Connect the Audio/Video cables between the Audio
(L/R)/Video jacks on the TV and AV device.
To connect an AV device (such as VCR,
camcorder, or game console) :
1. Turn on your TV, then press INPUT button. The Input Source
menu opens.
2. Press 5or6to select AV, then press OK to confirm.
3. Turn on your AV device , insert a videotape and press the Play
button.
To play the AV device:
Cables are often color-coded
to connectors. Connect
yellow to yellow, red to red,
white to white.
TV REAR
AV cable
Game console
Camcorder
VCR
VIDEO
R
L
AUDIO
Insert the plug of the headphone into the TV’s Headphone jack.
When using headphones, adjust the headphone volume so as to avoid
excessive levels, as hearing damage may result.
To connect headphones:
Insert your USB device into the USB port.
To play from the USB device:
1. Turn on your TV, then press INPUT button. The Input Source menu
opens.
2. Press 5or6to select USB, then press OK to confirm.
Never remove the USB device or turn off the TV while using the USB device.
TV Side
To USB port
Headphones
TV Side
Headphone connection
USB connection
AV device connection (for playback)
AUDIO
L RVI D EO
AV IN
CO M PONENT IN Y PBPR
US B
D- Su b
HD MI
RF PC I N
AUD IO
RS -2 32
S/ PD IF
MAX 5 00mA

US B
D- Su b
HD MI
RF PC I N
AUD IO
RS -2 32
S/ PD IF
MAX 5 00mA
US B
D- Su b
HD MI
RF PC I N
AUD IO
RS -2 32
S/ PD IF
MAX 5 00mA
Connections (Continued)
10
To connect a component video device:
1. Turn on your TV, then press INPUT button. The Input Source
menu opens.
2. Press 5or6 to select Component, then press OK to confirm.
3. Turn on your external device and set it to the correct mode. See
the device’s user guide for more information.
To play from the component video device:
Connect the Component Video cable between the Y, PB, PR input
jacks on the TV and Y, PB, PR output jacks on the device .
Connect the Audio cable between the AUDIO input jacks on the
TV and AUDIO output jacks on the device.
Component cables often have red,
green, and blue color-coded video
connectors and red and white audio
connectors. Match the colors when
making connections.
To connect a computer:
1. Turn on your TV, then press INPUT button. The Input Source
menu opens.
2. Press 5 or 6 to select D-SUB, then press OK to confirm.
3. Turn on your computer, and adjust the display properties as
required.
To play video from the computer:
Connect a D-SUB(VGA) cable between the D-Sub jack on the
computer and the D-Sub input jack on the unit.
Connect an Audio cable between the AUDIO output on the
computer and AUDIO input jack on the unit.
Connect the HDMI cable between the HDMI jack on the TV
and HDMI output jack on the device.
Note: If your device has an HDMI connection, we recommend
you use that to get the best quality possible.
To play from the HDMI device:
How to connect an HDMI device:
1. Turn on your TV, then press INPUT button. The Input Source
menu opens.
2.Press5or6to select HDMI, then press OK to confirm.
3. Turn on the HDMI device and set it to the correct mode. Refer to
the instructions that came with the HDMI device.
If the external device has DVI output only, use a DVI to HDMI adapter
cable to connect to the HDMI terminal. Connect the audio cable to the
PC IN AUDIO jack on the TV rear.
Note:
- -
DVD Player, etc.
Audio cable
Component
video cable
Component Video device connection
Computer connection
TV Side
HDMI cable
HDMI OUT
HDMI device
TV REAR
D-Sub cable
To monitor port
(15-pin D-Sub)
To audio output jack
Audio cable
TV Side
HDMI device connection
AUDIO
L RVI D EO
AV IN
CO M PONENT IN Y PBPR

1
3
With the power on, press MENU and the main menu screen displays.
Within the menu, press 5, 6,3or4 to navigate through the options or
adjust an option. Press OK to confirm a selection or enter a sub-menu.
Press 3or4to select menu. Press 6or OK to access the menu.
2
4Press MENU to return to previous menu. Press EXIT to exit the menu screen
directly. Or you may wait for a few seconds and the on-screen menu will
disappear from the screen automatically.
List of main menus to help you with operations
Main Menu Overview
To navigate through the OSD main menu
Basic Operations
11
Note:
SOUND menu
LOCK menu CHANNEL menu
=
Some menu items may be different when the unit works in different mode, and menu items that are not selectable are grayed out.
=
The PICTURE and SOUND menu have more than one page, please use 5or 6to scroll through.
=
The illustrations and on-screen displays in this manual are for explanation purpose (some are enlarged, others cropped) and may
vary slightly from the actual ones.
PICTURE menu
TIME menu OPTION menu
Select Move MENU Return
Picture Mode
Contrast
Brightness
Sharpness
Colour
Tint
Standard
50
50
50
50
50
PICTURE CHANNEL
LOCKOPTIONSOUND TIME
Select Move MENU Return
Sound Mode
Treble
Bass
Auto Volume
Balance
Surround Sound
Standard
50
50
0
Off
Off
CHANNEL
LOCKOPTIONSOUND TIME
PICTURE
SOUND TIME
Select Move MENU Return
On Time
Auto Sleep
Sleep Timer
Off
Off
Off
Clock 01/May/2011 15:30
Off Time Off
CHANNEL
LOCKOPTION
PICTURE
Select Move MENU Return
SOUND OPTION
English
OSD Language
Audio Languages
Subtitle Language
S/PDIF Output
Hearing Impaired
Audio Only
Audio 1
Simplified Chinese
Off
Auto
Normal
CHANNEL
LOCKTIME
PICTURE
Select Move MENU Return
SOUND
On
Off
568KI0011A0001
Lock System
Set Password
Block Programme
Restore Factory Default
Parental Guidance
Software Upgrade
CHANNEL
LOCKTIME OPTION
PICTURE
Select Move MENU Return
SOUND
ATV Manual Tuning
File System
Programme Edit
Auto Tuning
DTV Manual Tuning
CHANNEL
LOCKTIME OPTION
PICTURE

Basic Operations (Continued)
12
With the power on, press the Power button on the remote control to turn off the unit, and put the unit in standby mode. To
cut off the power completely, unplug the power cord.
Turning On
Turning Off
Turning On/Off the Power
First Time Setup
1
3
Make sure that:
The first time you use the TV, you need to set up the TV.
! You have installed the batteries in the remote control.
! You have connected the TV to an antenna or cable TV outlet.
! You have connected the power cord.
2Press POWER to turn on the TV. After a few seconds the
Installation Guide screen opens.
Highlight OSD Language item, press 3or4 to select a desired
OSD language.
Press 5or6 to select Channel Tuning item, and press 4or OK to
begin the auto tuning for all available channels. It may take several
minutes, please wait until it is finished.
During searching, the screen will display a report about found
stations. You can press MENU to skip the search, or EXIT to exit
the search.
Insert the power cord into the wall outlet.
If the unit is in standby mode, press Power button on the unit or the remote control to turn on the unit, and you will be ready
to use its features.
Select
Move
AV
HDMI
USB
Input Source
ATV
D-SUB
Component
Selecting the Input Signal Source
1
2
3
Press INPUT button.
Press 3,4 or OK to confirm the selection.
Press 6or 5to select the input source. Options include:
!DTV — Watch the DTV signal.
!ATV — Watch the ATV signal.
!AV — Watch the signal from the AV input terminals.
!Component — Watch the signal from the COMPONENT input terminals.
!D-SUB — Watch the signal from the D-SUB input terminal.
!HDMI — Watch the signal from the HDMI input terminal.
!USB — Watch the media source from the USB.
Freezing the Picture
Press the FREEZE button to freeze the image on the screen (the video sources still run). Press it again to reactivate the image.
=
If a fixed image is displayed on the screen for a long time, that fixed image may become imprinted on the screen and remain visible.
Therefore do not freeze the picture for a long time.
=
In some modes, the FREEZE function can not work.
Note:
Installation Guide
Region Selection
OSD Language English
Channel Tuning
HongKong
Select Move
EXIT
EXIT
Installation Guide
Region Selection
OSD Language English
Channel Tuning
HongKong
Select Move
EXIT
EXIT
DTV

Basic Operations (Continued)
13
Displaying the Information Banner
Press the INFO button to display the information banner. The information banner displays current status information such as
the channel number and signal source.
Depending on the mode, different information is displayed. In DTV mode, more information will be displayed. Below is an
example banner in DTV mode.
=
The above OSD is only served as an example, and it is in DTV mode.
=
Information banner content varies, depending on the broadcaster
and your settings.
In DTV mode, the information banner may contain:
!Channel number and name.
!Current time.
!Current program name, start and end play times.
!Next program name and start and end play times(press4).
!Audio track.
!Signal strength for current channel.
!Signal resolution.
!Subtitle, teletext.
Note:
82
H264 HD Dolby D
DTV
22:09
Fullmetal Alchemist
Thurs. 22:00 22:30
Subtitle 576i
J2
Audio 1
No Program Information.
The Electronic Programme Guide (EPG) makes it possible for users to see details about the programme they are watching, other
programmes and even a schedule of the next 7 days (if available). The information available includes the number and name of the
channel, the name of programme, the start and end time, and a summary. Thus viewers can easily get information about future
programmes.
Press the EPG button to open the EPG. In the EPG window (as shown
on the right), current channel s now and upcoming program’s
information will be displayed.
’
At upper screen, the channel number/name is shown, you can use
3or4 to select a channel whose information you want to know. At the
middle screen, this selected channel’s now and future programme
events are listed.
EPG Operation
1
Use 5 or 6 to navigate among the programme events.
Highlight a programme event, press RED button to access RECORDER
menu.
Highlight a programme event, press BLUE button to access Reminder
setting menu.
Press YELLOW button to access Schedule List.
Press INFO button to get more detailed information (if available) about
the program you choose.
2
3To clear the EPG window, press EXIT button or EPG button.
Note: The EPG will only work when you are receiving digital channels.
Reminder Setting
Press the EPG button to open the EPG, select your desired program.
1
2Press BLUE button to open Reminder setting menu. Now do the
following operations.
A. Mode: select a reminding mode. Once (remind once), Every Day
(remind everyday), or Weekly (remind weekly) can be selected.
B. Set Start Time freely.When finished, highlight Close and press OK.
Press BLUE button to return to EPG, or EXIT to exit the menu.
3
If you want the TV to switch to your desired channel at the present time, you can make use of Reminder setting to set the Mode,
Start Time. Then when the last 60 seconds have come up, a reminder will appear to remind you after how many seconds the TV will
switch to. Once the timer reached, the TV switch to the channel and show your desired program.
82 J2
Genius GO GO GO (PTH)
14 May 21:00- 22:00 Genius GO GO GO (PTH)
14 May 2011 21:57
22:00 - 22:30 Fullmetal Alchemist
22:30 - 23:30 Honey & Clover
23:30 - 23:55 Ah! My Goddess
23:55 - 00:00 Changer d’interieurs
00:00 - 00:50 The King Of Adventures
00:50 - 01:45 Wayward Kenting
01:45 - 02:40 Genius GO GO GO (PHT)
85 83
INFO Info
Return
MENU
Record Schedule Remind
Select Move
Mode
Reminder setting
Channel Name
EXIT
Return
Select Move
OK
Start Time
82 J2
Once
14/May 21:00
OK EXIT

Memorizing the Channels
Note: Be sure to select the proper input source (ATV/DTV) before operation.
If the Lock System is On, Auto Tuning / DTV Manual Tuning / ATV Manual Tuning / Programme Edit can not be
operated without password. For details, please see <Rating and Lock Setup> section.
1
Highlight UHF CH item, press 3or4 button to select your desired
multiplex number.
In CHANNEL menu, press 6or5 to select DTV Manual Tuning
item, then press4or OK to access.
2
This feature is available for service engineers or can be used for direct
channel entry if the multiplex channel is known.
Press OK to begin the search for that multiplex.
3
At the bottom of the menu screen the DTV Signal strength bar is
displayed. You can make use of it to check how strong your DTV
signal is and whether you need to adjust your antenna. The higher
the signal strength is, the less likely you are to experience picture
degradation.
14
Auto Channel Search
You should perform an auto channel search to search for all channels available and stores them in memory.
1Press MENU and the main menu screen displays.
Then the TV begins memorizing all ATV/DTV channels available in
your area. During the process, you can press MENU to skip the
search, or EXIT to exit the search.
3Highlight Auto Tuning item, and press 4or OK to access.
2Press 3or4to select CHANNEL menu, press 6or OK to access
the menu.
4
5
Now OK is highlighted, press OK to begin the auto channel search.
(If you want to abandon, highlight EXIT and press OK.)
DTV Manual Tuning
When the multiplex is found, any channels that are not currently in
the channel list will be added and the channel information will be
update.
During the process, you can press MENU or EXIT to exit the
search.
4
Note:
= In this model, the Region Selection item is set to HongKong by default and
cannot be adjusted.
Installation Guide
Region Selection
OK
HongKong
EXIT
Channel Tuning
ATV
DTV
: 24 Programme(s)
: 3 Programme(s)
Radio : 0 Programme(s)
76%... UHF CH 46 (DTV)
Skip
EXIT MENU
Exit
Select
ATV Manual Tuning
File System
Programme Edit
DTV Manual Tuning
PICTURE
Auto Tuning
Move MENU Return
SOUND CHANNEL
LOCKTIME OPTION
Select
ATV Manual Tuning
File System
Programme Edit
PICTURE
Auto Tuning
Move MENU Return
SOUND CHANNEL
LOCKTIME OPTION
DTV Manual Tuning
DTV Manual Tuning
Bad Good Normal
UHF CH 40
Return
OK MENU
Search

1
Highlight Storage To item, press 3or4 button to select the
position you want to store.
In CHANNEL menu, press 6or5 to select ATV Manual Tuning
item, then press4or OK to access.
2
Use the Manual Tuning operation if desired channels can not be preset
by Auto Tuning or if you would like to preset channels to specific position
numbers one by one.
Use 6or5 to select Search item, press 3or4to begin the manual
ATV channel search.
Press 4, the unit searches towards higher frequency;
Press 3, the unit searches towards lower frequency.
3
ATV manual tuning
The search stops when a program is found and this program will be
stored in the designated channel position, then press the RED
button to save. During the process, If you want to stop the search ,
please press EXIT button.
Memorizing the Channels (Continued)
15
4
Use 6or5 to select Sound System item, then press 3or4 to
select the proper sound system. (If certain channel’s sound is
abnormal, it may be that the sound system setting is wrong. In this
case , select another sound system.)
Use 6or5 to select Current CH item, then press 3or4 to
select current channel.
5
6
Labeling Channels
If required, you can give a name to the programs.
4From the Programme Edit list, press 6or5 to select a channel you
want to label, press GREEN button to start to label. A cursor
appears at the edit field.
5Use 6or5 to select character to input, use 3or4 to move the
cursor.
When finished, press OK to confirm.
The maximum length of label is 5 characters.
Repeat the above steps to label more channels.
1Press MENU and the main menu screen displays.
=
The labels of DTV channels are automatically assigned and cannot be changed by user.
Note:
2Press 3or4to select CHANNEL menu, press 6or OK to access
the menu.
3Press 6or5 to select Programme Edit item, press 4 or OK to
open the Programme Edit menu.
Programme Edit
82
DTV J2
DTV
DTV
3
ATV S-44
4
ATV S-45
83 iNews
85 High Definition
5
ATV S-45
6
ATV S-04
7
ATV C-05
Return
C - 0 3
MENU
Rename
OK Select
1 C-03
Programme Edit
82
DTV J2
DTV
DTV
1
ATV C-03
2
ATV C-42
3
ATV S-44
4
ATV S-45
83 iNews
85 High Definition
5
ATV S-45
6
ATV S-04
7
ATV C-05
FAV
OK
Delete Rename Move Skip
Select Favorite Return
MENU
Select
File System
Programme Edit
DTV Manual Tuning
PICTURE
Auto Tuning
Move MENU Return
SOUND CHANNEL
LOCKTIME OPTION
ATV Manual Tuning
ATV Manual Tuning
BG
Current CH 2
Search
Frequency
Save
55.25 MHz
Return
MENU
Storage To 1
Select
File System
DTV Manual Tuning
PICTURE
Auto Tuning
Move MENU Return
SOUND CHANNEL
LOCKTIME OPTION
ATV Manual Tuning
Programme Edit

Memorizing the Channels (Continued)
16
Setting up a favorite channel list
You can create a favourite channel list so you can quickly browse through your favourite
channels by pressing FAV.LIST, then selecting a channel from the favourite channel list.
1Navigate to the CHANNEL menu, press 5or6 to select Programme Edit item,
press 4 or OK to open the Programme Edit menu.
2Use 6or5 to select your favorite program, use AV.LIST button to mark the selected
program as favorite (a favorite symbol appears). To cancel the favorite mark, just press
AV.LIST button again and the symbol disappears. If the program list has more than
one page, you can press CH / to scroll the page.
Repeat the above steps to set more favorite programs.
F
F
3To exit, press EXIT button.
Now you can press F button to display the avorite list, press to browse
through the favorite programs and press OK to access the channel.
AV.LIST f6or5
To skip unnecessary channels
1Navigate to CHANNEL menu and press 6or5 to select Programme Edit item and
then press 4 or OK to access.
Press 6or5 to select your unwanted channel, press BLUE button and a skip symbol
appears alongside the selected channel in the list, which means this channel will be
skipped. (To cancel the skip setting, press BLUE button again and the symbol disappears.)
Note: If the Programme Edit menu has more than one page, you may press CH / to scroll the page upward or downward.
2
3
After auto search, you can skip unnecessary channels so that only the channels you want to
watch can be selected by CH / .
1Select the channel you want to move in the Programme Edit menu.
This function allows you to arrange the channel order.
Repeat the above steps for each channel you wish to move.
2
3
=
If the Programme Edit menu has more than one page, you may press CH / to scroll the page upward or downward.
=
The order of the DTV channels is automatically assigned and cannot be changed by user.
Note:
Press YELLOW button to start to sort, then use 6or5to move the channel upward or
downward to a desired new position. Press YELLOW button again to finish the moving.
If you want to skip more channels, repeat the above steps to set more skip symbols to
more channels.
Press EXIT to quit the list. Now when you press CH / , these unwanted channels will
be skipped.
To sort channels
1Select the channel you want to delete in the Programme Edit menu.
Press RED button and a delete symbol appears alongside the selected channel in the list.
Press RED button again to finish the delete.
This function allows you to delete your unwanted channels.
Repeat the above steps for more channels you want to delete.
2
3
To delete channels
Note:
=
If the Programme Edit menu has more than one page, you may press CH / to scroll the page upward or downward.
=
The deleted channels cannot be found unless you perform a channel search again.
Programme Edit
82
DTV J2
DTV
DTV
1
ATV C-03
2
ATV C-42
3
ATV S-44
4
ATV S-45
83 iNews
85 High Definition
5
ATV S-45
6
ATV S-04
7
ATV C-05
Delete Rename Move Skip
Delete
OK Select Favorite Return
FAV MENU
Programme Edit
82
DTV J2
DTV
DTV
1
ATV
C-03
OK
2
ATV C-42
3
ATV S-44
4
ATV S-45
83 iNews
85 High Definition
5
ATV S-45
6
ATV S-04
7
ATV C-05
Select Return
MENU
Move
Programme Edit
82
DTV J2
DTV
DTV
1
ATV C-03
OK
2
ATV C-42
3
ATV S-44
4
ATV S-45
83 iNews
85 High Definition
5
ATV S-45
6
ATV S-04
7
ATV C-05
Select Favorite Return
FAV MENU
SKIP
Delete Rename Move Skip
Programme Edit
82
DTV J2
DTV
DTV
1
ATV C-03
OK
2
ATV C-42
3
ATV S-44
4
ATV S-45
83 iNews
85 High Definition
5
ATV S-45
6
ATV S-04
7
ATV C-05
Delete Rename Move Skip
Select Favorite Return
FAV MENU

PVR Recording
PVR File System Setup (DTV only)
17
This TV provides PVR (personal video recorder) recording function, which allows the viewer to pause and rewind any
DTV program (that is, time shifting function), as well as record and play back selected programs. The program content will be
recorded in a digital format onto an external memory device (such as USB device, memory card, or other mass storage
device).
Below all operations in this section require the external memory device be connected with the TV. Otherwise the
operation can not be done.
Before proceeding, please pay attention to the following notes.
Checking file system of the external memory device
!Before PVR recording, you need to check the external memory device’s File System successfully.
!Do not disconnect the memory device from the TV while recording, or the data will be lost.
!During recording, a directory will be automatically created at the external memory device to temporarily save the data.
!The recorded contents cannot be played on any other product or computer, it also can not be played on the TV through the
USB input source.
!Important Copyright Information: Unauthorized use, copying, distribution, broadcasting, public performance,
lending or revision of the recorded TV programs are prohibited. Please refer to your local area copyright laws for
more details.
!The recorder once in time shift mode will continue recording what you are watching and overwrite any information already on
the memory device.
!If malfunction, then information already on the memory device may lose. So please back up your memory device data.
If a portable hard disk with large capacity is used, then it is suggested to use NTFS system.
!When Time Shifting, the external memory device need to write and read data simultaneously. So during the process it may
occur slight picture/sound pause or standstill depending on the memory device's speed and stability.
!After recording, you can connect the memory device to your PC to delete temporary data or format a partition to
completely clear those unnecessary data.
!Certain types of memory device (such as some USB devices) may not be compatible with this TV.
!
1Connect your USB device or portable hard disk to the USB port on TV
side firstly.
2Press MENU, then use 3or4to select CHANNEL menu, press 6or
OK to access. Press 5or6 to highlight File System, then press 4to
access. Now do the following to check file system.
B. Select Disk:
From File System menu, highlight Select Disk, press 4to access.
Use 3or4to select a disk, then move the highlight to OK box and press
OK to confirm. (To cancel, select EXIT to exit).
A. Set Free Record Limit
From File System menu, highlight Free Record Limit, press 3or4to
set the recording length of time (1Hr ~ 6Hr can be selected).
(Note: The record time also depends on your timer setting through the
EPG and your disk space. If the recording timer setting is shorter, then
the timer setting has priority over the Free Record Limit setting at the
File System menu. If no disk space left, then the recording stops )
Select
DTV Manual Tuning
PICTURE
Auto Tuning
Move MENU Return
SOUND CHANNEL
LOCKTIME OPTION
ATV Manual Tuning
Programme Edit
File System
Format
USB Disk
Speed
Select Disk C:
File System
Free Record Limit 6 Hr.
Check File System
Time Shift Size
EXIT
EXIT
Return
MENU
Select
Move
OK
OK
Format
USB Disk
Speed
Select Disk C:
File System
Free Record Limit 6 Hr.
Check File System
Time Shift Size
EXIT
EXIT
Return
MENU
Select
Move
OK
OK
Select Disk
OK EXIT
Disk C:

Note: After File System
checking, if “SD FAIL” appears
on the screen, that indicates
this external memory device is
not suitable to be used for
recording, please replace with
other one and try it again. If
“SD support” appears, that
means this external device is
suitable to record SD program,
but not HD program. If “HD
support” appears, then both
SD and HD programs are OK.
PVR Recording (Continued)
18
C. Format Disk:
1. From File System menu, highlight Format, press 4to access.
2. Now File System Size screen pops up with File System Type
highlighted. Hi Speed FS (select for high recording speed) and FAT32
can be selected with 3or4 button. (Note: If Hi Speed FS is chosen,
it will occupy disk space based on your File System Size setting,
while FAT32 will not)
! If Hi Speed FS is chosen, then press 6 to highlight File System Size,
use 3or4to select a size (the greater the size, the longer you can make
recording).The next line will show the recording time allowed (for
example, if shows “SD 294 Mins, HD 84 Mins”, that means recording
SD programs can last 294 minutes, while for HD programs, only 84
minutes is allowed at your disk) . Then highlight OK and press OK to
continue. (Note: It is recommended to select Hi Speed FS for
File System Type.)
!If FAT32 is chosen, then File System Size can not be set. The screen
will show the recording time allowed. Highlight OK and press OK to
continue.
3. Now a dialogue box appears asking you to continue or not. Highlight
OK and press OK to start formatting the disk, all data will be lost. (Or
select EXIT to abandon and exit).
4. After you chosen Hi Speed FS and set size and the format is finished,
the Time Shift Size screen pops up. Use 3or4to set Time Shift Disk
Size for time shifting, then highlight OK and press OK to proceed to
check file system and disk speed.
Checking file system and disk speed may take several minutes, please
wait. When finished, if File System Check is successful, the USB Disk
shows Pass, then you can start PVR recording function.
(At File System menu bottom screen, Time Shift Size, USB Disk and
speed information will appear, they can not be adjusted)
D. Check File System manually:
After disk formatting, the Check File System starts automatically. If
fails, please check file system manually.
From File System menu, highlight Check File System, press 4to start
formatting the disk manually.
During the process, please wait some time. When the file system check is
successful, the USB Disk shows Pass, then you can start PVR recording
function.
USB Disk
Speed
File System
EXIT
EXIT
Return
MENU
Select
Move
OK
OK
Format
Select Disk C:
Free Record Limit 6 Hr.
Check File System
Time Shift Size
USB Disk
Speed
File System
EXIT
EXIT
Return
MENU
Select
Move
OK
OK
Format
Select Disk C:
Free Record Limit 6 Hr.
Check File System
Time Shift Size
USB Disk
Speed
File System
EXIT
EXIT
Return
MENU
Select
Move
OK
OK
Format
Select Disk C:
Free Record Limit 6 Hr.
Check File System
Time Shift Size
File System Size
OK EXIT
File System Type Hi Speed FS
File System Size All
SD 294 Mins HD 84 Mins
Format disk
Warning! All data will be lost.
Are you sure to continue?
OK EXIT
USB Disk
Speed
File System
EXIT
EXIT
Return
MENU
Select
Move
OK
OK
Format
Select Disk C:
Free Record Limit 6 Hr.
Check File System
Time Shift Size
Format disk
Do not unplug USB device.
Create file system. Please wait...
USB Disk
Speed
File System
EXIT
EXIT
Return
MENU
Select
Move
OK
OK
Format
Select Disk C:
Free Record Limit 6 Hr.
Check File System
Time Shift Size
Time Shift Size
OK EXIT
Time Shift Disk Size 512 MB
SD 80 Mins HD 25 Mins
USB Disk
Speed
File System
EXIT
EXIT
Return
MENU
Select
Move
OK
OK
Format
Select Disk C:
Free Record Limit 6 Hr.
Check File System
Time Shift Size
Pass
2282KB/s
512 MB
HD support
USB Disk
Speed
File System
EXIT
EXIT
Return
MENU
Select
Move
OK
OK
Format
Select Disk C:
Free Record Limit 6 Hr.
Check File System
Time Shift Size