Yamaha BD-S1900 User manual

eYAMAHA
BLU-RAYDISC PLAYER
80-S1900
OWNER'S MANUAL
MANUAL DE INSTRUCCIONES
o YAMAHA
II
II
(@
':" '"'0"; II
0@@~~~
IIrI
~ r£lCOMPACT
~~'" LlliD~(]5
v IDE 0DIGITAL AUDIO
~~
.o::::-~
Java
POWERED
[I] DOLB~ ~ dts-HD
TRUE}E I Master Audio I Essential

IMPORTANT SAFETY INSTRUCTIONS
Rl'ad Ihesl' opl'rating instructions carefully hefore using (he unit. Follow the safety instructions on the unit and Ihe applil'ahle safety
in,truction,
li"l'd helow. Kl'l'p Ihesl' operating instructions handy for futurL' reference.
I
2
3
4
5
6
7
l)
Read the,e instructions.
Kcl'p the",' instructions.
Heed all warnings.
Follml all instructions.
Do
not u",' this apparatus ncar water.
Clean only with dry cloth.
Do not
hioCK any ventilation openings. In,tall in accordance
with the manufaCIUrl'r's in,truction,.
Do
not imtall nl'ar any IKat sources such as radiator,. hl'at
rcgisters.
stOVl'S, or othl'r apparatus (including amplitll'rs)
Ihat producl' hl'a\.
Do
not dckat thl' safely purpose of thl' polari/.l'd or
grounding-type plug. Apolari/ed plug has two bladl's with
onl' willer than the
lJthl'1". Agrounding-type plug has two
hlades and athird grounding prong. Thl' wide bladl'
or the
third prong arl' providl'd for your
sakty. If thl' providl'd
plug
doc, not III into your outlc\. consult an l'lectrician for
n:placl'llll'nt
of thl' obsolete outll'\.
WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR
PROnUCT DAMAGE,
• DO NOT EXPOSE THIS APPARATUS TO RAIN,
MOISTURE, DRIPPING OR SPLASHING AND
THAT NO OBJECTS FILLED WITH LIQUIDS,
SUCH AS VASES, SHALL BE PLACED ON THE
APPARATUS.
•USE ONLY THE RECOMMENDED
ACCESSORIES.
•DO
NOT REMOVE THE COVER (OR BACK);
THERE ARE NO USER SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
CAUTION!
DO NOT INSTALL OR PLACE THIS UNIT IN A
BOOKCASE, BUILT-IN CABINET OR IN ANOTHER
CONFINED SPACE.
ENSURE
THE UNIT IS WELL VENTILATED. TO
PREVENT RISK OF ELECTRIC SHOCK OR FIRE
HAZARD DUE TO OVERHEATING, ENSURE THAT
CURTAINS AND ANY OTHER MATERIALS DO NOT
OBSTRUCT THE VENTILATION VENTS.
CAUTION!
THIS PRODUCT UTILIZES A LASER
USE OF CONTROLS OR ADJUSTMENTS OR
I'ERFOR\IANCE OF PROCEDURES OTHER THAN
THOSE SPECIFIED HEREIN MA Y RESULT IN
HAZARDOUS RADIATION EXPOSURE.
1)0 NOT OPEN COVEI{S AND DO NOT REPAIR
YOURSELF.
REFER SERVICING TO QUALIFIED PERSONNEl..
10 Protect thl' powl'r cord frolll bl'ing l\alKed on or pinchl'd
particularly at plug,. conl'Cniencc recl'ptacles. and lhl' point
where they l'xit from the apparallls.
II Only use allachlllcnts/accl'ssoril's spl'cilled by thL'
manufacturl'1".
12 Use only with thl' cart. stand. tripod. hracKl't.
or table SIJl'citll'd
hy Ihe manufacturer. or sold tI
with the apparallls. When acart i, used. use
caution when moving thl' cart/apparatu,
combination to avoid injury from tip-owl".
13 Unplug this apparatus during lightning slorlll.s
or when unused for long perillds
of timc.
14 Refl'r all servicing to qualilll'd service pl'rsonnc!. Sl'rvicing
is requirl'd whcn lhe apparalu.s has been damaged in any
way. such as power-supply cord
or plug is damaged. liquid
has hl'en spilled or ohject.'; have I"allen into the apparatus.
thl' apparatus has hel'n l'xposl'd to rain or nwisturl'. dol'S not
opnate normally. or has bl'l'n druppl'd.
CAUTION
Danger oj" explo,ion i I" hallery i, incorrL'clly replacl'd. Rl'place only
with
Ihe same or equi\ ail'nt type.
The
socKet outil't shall hL' installed nt'ar thL' equipment and ea,ily
accessihil'. The main, plug
oj" the power ,uppl) cord ,hall rL'lllain
readily operahlc.
To
L'llinpil'tL'ly disconnL'ct this appar;ltlh I"nlill thL' AC M;lins.
disL'onneL't the power ,upply L'llrd plug I"rolll AC rL'L'L'pt;lL'k.
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK,
DO NOT REMOVE SCREWS.
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE
PERSONNEL
The lightning flash with arrowhead symhoL
within an equilateral triangk. is intended to alen
the user to the presence of uninsulated "dangerous
voltage" within the product's enclosure that may
be of sufficient magnitude to constitute arisk of
electric shOCK to persons.
The exclamation point within an equilatl'ral
triangle is intended to alert the user to the presence
of important operat ing and Illai ntenance
(servicing) instructions in the literature
accompanying the appliance.
Caution-i En

FCC INFORMATION (for US customers)
1IMPORTANT NOTICE:
DO NOT MODIFY THIS
UNIT!
This product, when installed as indicated in the instructions
contained
in this manual, meets FCC requirements.
Modifications not expressly approved by Yamaha may void
your authority, granted by the FCC, to use the product.
2IMPORTANT: When connecting this product to accessories
and/oranother product use only high quality shielded cables.
Cable/s supplied with this product MUST be used. Follow
all installation instructions. Failure to follow instructions
could void your FCC authorization to use this product in the
USA.
3
NOTE: This product has been tested and found to comply
with the requirements listed
in FCC Regulations, Pm1 15 for
Class
"B" digital devices. Compliance with these
requirements provides areasonable level
of assurance that
your use
of this product in aresidential environment will not
result in harmful interterence with other electronic devices.
This equipment generates/uses radio frequencies and,
if not
installed and used according to the instructions found
in the
users manual, may cause interterence harmful to the
operation
of other electronic devices.
Compliance with FCC regulations does not guarantee that
interterence will not occur in all installations. If this product
is found to be the source of interterence, which can be
detelmined by turning the unit
"OFF' and "ON", please try
to eliminate the problem
by using one of the following
measures:
Relocate either this product
or the device that is being
affected by the interference.
Utilize power outlets that are on different branch (circuit
breaker
or fuse) circuits or install AC line filter/s.
In the case of radio or TV intert'erence, relocate/reorient the
antenna.
If the antenna lead-in is 300 ohm ribbon lead,
change the lead-in to coaxial type cable.
If these corrective measures do not produce satisfactory
results, please contact the local retailer authorized
to
distribute this type of product. Ifyou can not locate the
appropriate retailer, please contact Yamaha Electronics
Corp., U.S.A. 6660 Orangethorpe Ave., Buena Park, CA
90620.
The above statements apply ONLY to those products
distributed by Yamaha Corporation
of America or its
subsidiaries.
COMPLIANCE INFORMATION STATEMENT (DECLARATION.oF CONFORMITY PROCEDURE)
Responsible Party:
Address:
Telephone:
Fax:
Type
of Equipment:
Model Name:
Yamaha Electronics Corporation, U.S.A.
6660 Orangethorpe Avenue
Buena Park, CA 90620
714-522-9105
1-800-492-6242 (toll free)
714-228-3390
Blu-ray Disc Player
BD-S1900
•This device complies with Part
15 of the FCC Rules.
•Operation
is subject to the following conditions:
-This device may not cause harmful interference.
-This device must accept any interference received including
interference that
may cause undesired operation.
See the "Troubleshooting" section at the end
of this manual if
interference to radio reception
is suspected.
~
y
Wanl'obu
LISTENING
for ALlletime===
We Want You Listening For ALifetime
Yamaha and the Electronic Industries Association's Consumer Electronics Group want you to get the most out of
your equipment by playing it at asafe level. One that lets the sound come through loud and clear without annoying
blaring
or distortion -and, most importantly, without affecting your sensitive hearing.
Since hearing
damage from loud sounds is often undetectable until it is too late, Yamaha and the Electronic
Industries
Association's Consumer Electronics Group recommend you to avoid prolonged exposure from excessive
volume levels.
IMPORTANT
Please record the serial number of this unit in the space
below.
MODEL:
Serial No.:
The serial number is located on the rear of the unit.
Retain this Owner's Manual in a safe place for future
reference.
Caution-ii En

CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.
To assure the finest performance, please read this manual
carefully. Keep
it in asafe place for future reference.
2Install this sound system
in awell ventilated. cool. dry, clean
place-away from direct sunlight. heat sources. vibration. dust,
moisture. and/or cold. For proper ventilation. allow the
following minimum clearances.
Top: IOcm(3-7/8in)
Rear: IOcm (3-7/8 in)
Side:
IOcm(3-7/8in)
3Locate this unit away from other electrical appliances.
motors. or transfonne.rs to avoid humming sounds.
4Do not expose this unit to sudden temperature changes from
cold
to hot. and do not locate this unit in an environment with
high humidity (i.e. aroom with a humidifier) to prevent
condensation inside this unit, which may cause
an electrical
shock, fire, damage to this unit, and/or personal injury.
5Avoid installing this unit where foreign object may fall onto
this unit and/or this unit may be exposed to liquid dripping or
splashing. On the top
of this unit, do not place:
- Other components, as they may cause damage and/or
discoloration on the surface of this unit.
- Burning objects (i.e. candles), as they may cause fire,
damage to this unit, and/or personal injury.
-
Containers with liquid in them, as they may fall and
liquid may cause electrical shock to the user and/or
damage to this unit.
6Do not cover this unit with anewspaper. tablecloth. curtain,
etc.
in order not to obstruct heat radiation. If the temperature
inside this unit rises.
it may cause fire, damage to this unit,
and/or personal injury.
7Do not plug in this unit to awall outlet until all connections
are complete.
8Do not operate this unit upside-down. It may overheat.
possibly causing damage.
9Do not use force on switches. knobs and/or cords.
10 When disconnecting the power cord from the wall outlet.
grasp the plug: do not pull the cord.
11 Do not clean this unit with chemical solvents: this might
damage the finish. Use aclean, dry cloth.
12 To prevent damage by lightning, keep the power cord
disconnected from awall outlet
or this unit during alightning
storm.
13 Do not attempt to modify or fix this unit. Contact qualified
Yamaha service personnel when any service
is needed. The
cabinet should never be opened for any reasons.
14 When not planning to use this unit for long periods of time
(i.e. vacation), disconnect the AC power plug from the wall
outlet.
15 Be sure to read the 'Troubleshooting" section on common
operating errors before concluding that this unit
is faulty.
16 Before moving this unit, press 0to set this unit to the
standby mode. and disconnect the AC power plug from the
wall outlet.
17 Condensation will form when the surrounding temperature
changes suddenly. Disconnect the power cable from the
outlet, then leave this unit alone.
Caution-iii En
18 When using this unit for along time. this unit may become
warm. Turn the power off. then leave this unit alone for
cooling.
19 Install this unit near the AC outlet and where the AC power
plug can be reached easily.
20 The batteries shall not be exposed to excessive heat such as
sunshine. fire or the like.
This unit is not disconnected from the AC power source
as long as it is connected to the wall outlet, even if this
unit itself is turned off by c9. This state is called the
standby mode. In this state, this unit is designed to
consume a very small quantity of power.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK. DO NOT EXPOSE THIS UNIT TO RAIN OR
MOISTURE.
The laser component in this product is capable of
emitting radiation exceeding the limit for Class I.
FOR CANADIAN CUSTOMERS
To prevent electric shock, match wide blade of plug to
wide slot and fully insert.
This Class B digital apparatus complies with Canadian
ICES-003.
POUR LES CONSOMMATEURS CANADIENS
Pour eviter les chocs electriques, introduire la lame la
plus large de la fiche dans la borne correspondante de la
prise et pousser jusqu'au fond.
Cet appareil numerique de la classe Best confonne ala
norme NMB-003 du Canada.
I
i~
_J
CLASS 1LASER PRODUCT
LASER KLASSE 1PRODUKT
LUOKAN 1LASERLAITE
KLASS 1LASER APPARAT
PRODUIT LASER DE CLASSE 1

Contents
1. INTRODUCTION
About Discs 2
Types of Discs that Can Be Used with This Player 2
Discs that
Cannot Be Used with This Player. 3
Disc Precautions . 4
Getting Started 5
Supplied accessories 5
The Icons Used in This Operation Manual. 5
Copyright 5
Controls and Functions 6
Front panel.............. 6
Rear panel............. 6
Remote Control. .. 7
2. CONNECTION
Introduction to Connections 8
Video/audio terminal on this Player 8
Video
jacks on this Player (Connect G), (1), or @) 8
Audio terminals/jacks on this Player
(Connect (D, (1), or @). 8
Broadband Intcrnet connection...... 8
USB device connection
.. .. 8
HDMI Connection 9
Connecting to the HDMI Terminal 9
Video Connections 10
Connecting to the Component Jacks 10
Connecting to the SVideo or Video Jack.. II
Audio Connections 12
Connecting to the Digital Audio JacklTerminal 12
Connecting to the Audio Jacks.. .. 13
Broadband Internet Connection 14
Connecting to the NETWORK terminal and USB BD
STORAGE/SERVICE terminal..................... 14
Other Connections 15
Connecting to the REMOTE CONTROL jacks 15
Connecting the power cable 15
3. DISC PLAYBACK
Before Starting Playback................................. 16
Loading the Batteries in the Remote Control 16
Turning the Power On 16
Indicators on the front panel display 16
Setting the on-screen display language 17
Updating the software of this unit 17
Setting the audio output 18
Preparing for BD-LIVE 18
Activating the Secondary Audio 18
Controlling the Blu-ray disc player using the HDMJT"
control function
18
BD/DVD/CD Playback 20
Loading aDisc.................................. .. 20
Basic playback operation 20
Enjoying pure hi-fi sound (Pure Direct function) 21
Repeat Playback ...... .. 21
Using BD/DVD Menus .. 22
Using
DVD-Rf-RW Menu.............. .. 22
Using the
Audio CD Playback Menu 24
Enjoying BONUSVIEW or BD-L1VE 24
Function Control Screen 25
Displaying the disc information 27
IJPEG File Playback 28
Playing back still images in se4uence .. 28
Playing back still images in aselected folder 28
Playing back Slide
Show 28
Setting slide
show speedlrepeat playback 28
4. SETTINGS
Settings 29
Common operations 29
Audio Video Settings
30
Speaker Settings 32
Quick Start 33
Auto
Power Off......................... .. 33
HDMI Control 33
Playback Setting 33
Version
34
System Reset 34
Communication Setup 34
USB Memory Management 36
Software Update........ .. 37
5. ADDITIONAL INFORMATION
Troubleshooting 39
Power 39
Basic Operation 39
Disc Playback
39
Picture 39
Sound 40
Network 40
Other 41
Messages Relating to BD disc and DVD disc 41
Glossary 42
Specifications 43
General 43
Audio Performance 43
Input/Output 43
(at the end of this manual)
Information about software .i
1En
1
2
3
4
5

About Discs
•Types of Discs that Can Be Used
with This Player Region management information
Model SD-Video DVD-Video
- BD/DVD video players and discs have region codes.
which dictate the regions in which a disc can be
played. For the region codes, refer to "Region
management information" (p, 2)
BD/DVD Video operations and functions may be
different from the explanations in this manual and
some operations may be prohibited due to disc
manufacturer's settings.
If a menu screen or operating instructions are
displayed during playback of adisc, follow the
operating procedure displayed.
-
The audio component of a DVD video recorded at 96
kHz (Linear peM) will be output as 48 kHz audio
during playback .
The following discs can be played back in this
Player. Do not use an 8
em (3") to 12 em (Y')
adapter.
Use discs that conform to compatible standards as
indicated by the presence of official logos on the
disc label. Playback of discs not complying with
these standards is not guaranteed. In addition, the
image quality or sound quality is not guaranteed
even if the discs can be played back.
Disc Type Recording Contents Disc Size
Format
BD vidco
--
Audio + Video
12 cm (Y')
BD-RE DL BDMV formal
(Movic)
BD-R DL
DVD Vidco Vidco rormat Audio + Vidco
12 cm (Y')
(Movie)
g cm n")
DVD+RWI Video/YRI Audio + Viueo
12 crn (5")
DVD+R
AVCHD
(Movie)
g cm (:'\"")
DVD+R DL
format
DVD-R DL <finalized disc
DVD-RWI
only)
DVD-R
AudioCD"1
AudioCD Audio
12 crn (Y')
(CD-DAJ
gcm 0")
CD-RW/CD-R AudioCD Audio
(CD-DAJ
.I PEG':'
Still image
(.IPEG rile)
"'1 This Playcr ha, hcen uesigncd on thc premise or playing back
Audio CDs tbat comply with CD (Compact Disc) standards. CDs
containing asignal 1'01' Ihe purpose or protccting copyrights (copy
control signalJ may not be able to hc played back with this Player.
.,• .., Rckr to "Ahoutthc .I PEG rile rormat" on page:l.
Australia
Russia
Asia
Region code "B" or Region number "-1"
"ALL" or "ALL"
Region numbcr "5"
or "ALL"
Rcgion number "T'
or"ALL"
Region management information Notes
Model SD-Video DVD-Video
U.S.A Regioncode"A"nr Regionllumbcr"I"
"ALL" or "ALL"
Soulh America
Europc
2En
Region number "·r
or "ALL"
Region number"2"
or "ALL"
- Playback for some of the discs in the left side
column tables may not be possible depending on the
disc,
-
"Finalize" refers to a recorder processing a recorded
e1isc so that it will play in other DVD playersl
recorders as well as this Player. Only finalized DVD
discs will play back in this Player. (This Player does
not have afunction to finalize discs.)

About Discs
Root
Z
-t
::D
o
C
C
o
-t
o
Z
1
256 Folder
01 Folder
r-----001.jpg
r----- 002.jpg
'-------003.jpg
02 Folder
f-----254.jpg
f----- 255.jpg
'-------256.jpg
When using the unit to playa CD·RW/R disc
with still images stored (recorded).
-With CD-RW/R discs on which still images are
mixed
in with music or movies. you will be able to
play only the still images. You may not be able to
play some
of these discs at all.
-Multi-session discs cannot be played.
-You may not be able to play some still images you
have processed (rotated
or saved by overwriting
other images) using image processing software or
some still images you have imported from the
Internet
or e-mail.
-
The discs which this Player can play back
(recognize) are limited to the following properties:
Contains
EXIF format files
Picture resolution: Between 32x32 and
7680x4320
pixels
Maximum number of folders: 256
Maximum number
of files: 256 per folder
File size:
20MB or less
Structure of still images (JPEG) folders
-You can play still images (JPEG) with this unit by
making folder on disc as shown below. Images
situated on the root directly cannot be played back.
r-----004.jpg
r----- 005.jpg
f-------006.jpg
'-------007.jpg
About the dPEG file format
JPEG is atype of file format for storing still-image files
(photos, illustrations, etc.).
The Player lets you play JPEG
format still-image files.
File formats that are not compatible.
-Still images in formats other than IPEG (such as
TIFF) cannot be played.
-There may be some files that cannot be played even
if they are in JPEG format.
-Progressive
JPEG files cannot be played.
-Moving image files and audio files as well as Motion
JPEG format files cannot be played, even though
they are
JPEG files.
Other files that cannot be played back.
-You may not be able to play some still images which
you have created, touched up, copied
or otherwise
ecli ted on your computer.
You may experience one or more of the
following symptoms when playing files.
- It may take some time to play files depending on the
number of folders, number of files and volume of
data involved.
-
EXIF information will not be displayed. EXIF stands
for Exchangeable Image File Format, and is a
standard for storing interchange information in
image files, especially those using IPEG
compression. (Refer to http://exif.org for more
information.)
COG, Video CD, Photo CD, CD-ROM. CD-TEXT,
SYCD, SA-CD, PO, COY, CYD. DYD-RAM, DYD-
Audio,
BD-RE with the cartridge, CD-MP3. CD-WMA
Discs with unusual shapes cannot be
played.
-Discs with unusual shapes (heart-shaped or
hexagonal discs, etc.) cannot be used. The use of
such discs will cause malfunction.
The following BD/DVD video discs cannot
be played.
-Discs not match the region code/number of this
Player ("Region management information",
p. 2).
-Discs produced illegally.
-Discs recorded for commercial use.
•Discs that Cannot Be Used with
This Player
The following discs cannot be played back or will not play
back properly on this Player. If such adisc is mistakenly
played back, speaker damage may occur.
I
3 En

About Discs
•Disc Precautions
Be Careful of Scratches and Dust
-BO, OVO and CO discs are sensitive to dust.
fingerprints and especially scratches. Ascratched
disc may not be able to be played back. Handle discs
with
care and store them in asafe place.
Proper Disc Storage
Place the disc in the center of the disc case
~~
and store the case and disc uprighl.
Avoid storing discs in location, subject to
~~~O:
direct sunlight. close to healing appliances ., l· ,\
or in locations of high humidity.
::~
Do not drop discs or subject them to
f!JJi
,trong vibrations or impacts.
it, =
~
Avoid storing discs in locations where &
r~
there arc large amOUIllS of dust or
.~cJ
~"'" Y r)
moisture.
0) ~ '"
Handling Precautions
~
r: (,) - If the surface is soiled. wipe gently with a
."p soft. damp (water only) cloth. When
~ wiping discs, always move the cloth from
,\ 'I the center hole toward the outer edge.
,'":, -Do not use record cleaning sprays,
::~I:~lp, benzene, thinner, static electricity
<9-" i~."J.~ prevention liquids or any other solven!.
-Do not touch the surface.
-Do not stick
paper or adhesive labels to the disc.
-If the playing surface
of adisc is soiled or scratched.
the Player may decide that the disc
is incompatible
and eject the disc tray,
or it may fail to play the disc
correctly.
Wipe any dirt off the playing surface with
asoft cloth.
Cleaning the Pick Up Lens
-Never use commercially available cleaning discs.
The use of these discs can damage the lens.
-Request the nearest service
center approved by
Yamaha to clean the lens.
Warnings about dew formation
- Condensation may form on pick up lens or disc in
the following conditions:
-Immediately after a heater has been turned on.
-
In a steamy or very humid room.
-
When the Player is suddenly moved from acold
environment to a warm one.
When condensation forms:
-It becomes difficult for the Player to read the signals
on the disc and prevents the
Player from operating
properly.
4En
To remove condensation:
- Take out the disc and leave the Player with the
power off until the condensation disappears. Using
the Player when there is
condensation may cause
malfunction.

Getting Started
1
•The Icons Used in This Operation
Manual
Z
-l
:xl
o
C
C
(')
-l
o
Z
- Manufactured under license from Dolby
Laboratories. "Dolby" and the double-D symbol are
trademarks
of Dolby Laboratories.
-
Manufactured under license under U.S. Patent #'s:
5,45 I,942; 5,956,674; 5.974.380; 5,978,762;
6,226,616; 6,487,535; 7,392,195; 7,272,567;
7,333.929; 7,212,872 & other U.S. and worldwide
patents issued &pending.
DTS is aregistered
trademark and the
DTS logos. Symbol, DTS-HD and
DTS-HD Master Audio IEssential are trademarks of
DTS, Inc. ©J 996-2008 DTS, Inc. All Rights
Reserved.
-
~ is atrademark.
Blu.'oYYD/~c
- "BD-LIVE" logo is atrademark of Blu-ray Disc
Association.
-
"BONUSVIEW" is a trademark of Blu-ray Disc
Association.
-
~ is atrademark of DVD Format/Logo
Licensing Corporation.
-
HDMl, the HDMI logo and High-Definition
Multimedia Interface are trademarks or registered
trademarks
of HDMI Licensing LLC.
- "x.v.Color" and "x.v.Color" logo are trademarks.
-
"A VCHD" and the "A VCHD" logo are trademarks
of Panasonic Corporation and Sony Corporation.
-
Java and all Java-based trademarks and logos are
trademarks
or registered trademarks of Sun
Microsystems, Inc.
in the United States and/or other
countries.
-This product is licensed under the AVC patent
portfolio license and VC- Jpatent portfolio license
for the personal
and non-commercial use of a
consumer to (i) encode video in compliance with the
A VC Standard and YC-I Standard CA YCIVC-I
Yideo") and/or (ii) decode A YCIVC-l Video that
was
encoded by a consumer engaged in apersonal
and non-commercial activity and/or was obtained
from avideo
provider licensed to provide AYCIVC- I
IVideo. No license is granted or shall be implied for
any other use. Additional information may be •
obtained from MPEG LA, LLC.
See http://www.mpegla.com.
-Audio-visual material may consist of copyrighted
works which must not be recorded without the
authority
of the owner of the copyright. Refer to
relevant laws in
your country.
-This product incorporates
copyright protection
technology that is protected by U.S. patents and
other intellectual property rights. Use of this
copyright protection technology must be authorized
by Macrovision, and is intended for home and other
limited viewing uses only unless otherwise
authorized by Macrovision. Reverse engineering or
disassembly is prohibited.
U.S. Patent Nos. 6,836,549; 6,381,747; 7,050,698;
6,516,132; and 5,583,936
•Copyright
Video pin cable
Power cable
Audio pin cable
Batteries (x2)
(AAA, R03, UM-4)
Remote
control
OYAMAHA
G
aaa
DOD
c:::=J ~ c=::J
G:J~~
C2:J C!:J C!:J
~~~
[
•• C 0
'6,,9°{~f
I@~-
,0 0
!c~JGpG
18GB
iElGG
0000
mm!J Indicates the functions that can
be
performed for BD Video discs.
':III:l#l!
lndicates the functions that can be
performed for BD-RE discs.
GmI
Indicates the functions that can be
performed for BD-R discs.
'Imll!l Indicates the functions that can
be
performed for DVD Video discs.
'Imll.WI Indicates the functions that can be
performed for DVD-RW discs.
'llt4lld1
Indicates the functions that can be
performed for DVD-R discs.
Indicates the functions that
can be
mllllleDI.
performed for Audio CDs.
mm
Indicates the functions that can be
JPEG performed for
CD-R discs in JPEG format.
filll.WI Indicates the functions that can be performed
JPEG for CD-RW discs
in JPEG format.
•Supplied accessories
Make sure the following accessories are provided with the
product.
5 En

Controls and Functions
•Front panel
o YAMAHA
[I
~
~
OUOCM P!JftfOOR(Cl I
II Cf) f@ ~ ~ ~
III
I
==1== ===1=== ~
III!I
[1==IJ
I!IIIIIII
I
CD
®@
®® (J) ®@ @ ®
CD (!) (Power) (p. 20)
CV QUICK indicator (p. 33)
@PURE DIRECT (p. 21)
@
Front panel display (p. 16)
® Disc tray (p. 20)
® ... (Eject) (p. 20)
(j) ~/ .... (Search backward/Skip backward)
(p.20)
® ~/~ (Search forward/Skip forward)
(p.20)
® ~ (Play) (p. 20)
@
•• (Pause) (p. 20)
® • (Stop) (p. 20)
•Rear panel
CD
®
~
I
I!-
------1
I-
-I -
.. - _._ ..
--- --
--
----- .
---- ------
I
1--
i
~0'
I@ @l
cf
:::.:
,@
iI
r=l
fWTEll ~ 9MOINJ FRONT
--I"
COA~IAL
i--REMOTE'ON1ROI..
iI
1~®r®I®(
'®®®
®
I
It]
II ~
~W
l~·®~~.®1
)®~®
0
~j
~
I
00
,I
AC IN '"'"
I VIOEo_l PR
SVlOEO
--1-- -VIDEO'
H-
""
- ____ -~-_----_-_-L-- -- -~-L
-I
-NETWOf'It<-
-IOJ~~
--
- ------_._- --- ---
.. _-
- --
I I IIIl
I! !I
CD AC IN (p. 15)
CV AUDIO OUT (8ch discrete) (p. 13)
@AUDIO OUT (MIXED 2CH) (p. 13)
@COMPONENT (p. 10)
®DIGITAL OUT (COAXIAL) (p. 12)
®REMOTE CONTROL (IN/OUT) (p. 15)
(j) REMOTE CONTROL (RS- 232C) (p. 15)
®VIDEO (p. 11)
®SVIDEO (p. 11)
® @@ ®® @
@DIGITAL OUT (OPTICAL) (p. 12)
®NETWORK (p. 14)
©USB BD STORAGE/SERVICE (p. 14)
@HDMI (p. 9)
6 En

Controls and Functions
.YAMAHA
Z
-l
:tJ
o
o
c
o
-l
5
z
1
ID function
You can change the remote control TO to prevent
unwanted operation
of the other Yamaha player such as
OVO player. Tf you have changed the remote control TO,
make sure that you select the same [0 for the main unit.
The default setting
is lOl.
CD Remote control setting
To change the lO from lO Ito lO2, press and hold Aand 2
simultaneously for 3seconds.
To change the lO from lO2 to
lO I, press and hold Aand 1
simultaneously for 3seconds.
@Main unit setting
Press and hold ~/~ and ~/~ on the front panel
simultaneously for 2seconds while no disc is inserted
in
this Player and the disc tray is closed (current [0 is
displayed). Keep pressing and holding the keys for
another 2seconds to change the
10 between [0 Iand 102.
®EXIT (p. 28, 29, 30)
® •• (Pause) (p. 20)
@ • (Stop) (p. 20)
@STATUS (p. 21, 27)
@ON SCREEN (p. 26)
@SETUP (p. 17, 28, 29)
@ Pin P(p. 25)
@ <9 (Power) (p. 16)
@VIDEO-RESET (p. 30, 31)
@J ANGLE (p. 26)
®AUDIO (p. 26)
@ENTER (p. 30, 37)
@POP UP MENU (p. 22)
®RETURN (p. 21, 24, 26, 28, 29)
@ ~ (Play) (p. 20)
@ ~ / ~ (SLOW/SKIP) (p. 20)
@ ~ / ~ (SEARCH) (p. 20)
®OFF (p. 21)
@REPEAT (p. 21,26)
f-++f.f--- ®
!-+*+--@
lH:+--@
iHH--@
f---*-f---@
--i++--@
f-+H--@
""-'--@
;--m--@
L..----f.!.o\---@
•Remote
Control
CD
~ , G ~
®
@
III OPEN/CLOSE I DIMMER VIDEORESET III
E:::JJ -E::J c::=:3
III SUBTITLE AUDIO ANGLE III
0
E:=J c;:J c::::3 III
P~[2]1
®
IGJG:J~I
I~~~J
~ r;:::=::;
®--wtC~EAR ~ l~J i ENT:R I)
Q) ff6 ClCl Cl~
IIII ~ENUrrITLE LIST POP UP MENU
®
o/~
tfJ 6
Ie
@
{[ <J 8 c> )
~~
\l ;/
EXIT RETURN
@
11110 °1111
®
1111~m~
@
@
IIII ~SLOW/SKIP 11111
IIII ~~I-s~cH-I~1111
@I
EllC3-EJ.l111
@
III SETUP PlnP REPEAT OFF
III 0-.9 Q0 111
@
Note
CD Infrared signal transmitter (p. 16)
@DIMMER (p. 16)
G) OPEN/CLOSE (p. 20)
@SUBTITLE (p. 26)
® Number buttons (p. 26)
®CLEAR (p. 29)
(f) A, B, C, D(p. 23, 24, 28, 35)
®TOP MENUITITLE LIST (p. 22, 23)
® Cursor buttons (~ / \J / <J / [», ENTER (p. 17,
30)
- If the remote control is without batteries for afew
minutes or if exhausted batteries remain
in the
remote control, the remote control
[0 is
automatically set to TO I. Tf you want to use the
remote control
in T02 setting, install new batteries
and set the remote control
TO again. I
7 En

Introduction to Connections
This Player is equipped with the terminals/jacks listed below. Find the corresponding terminal/jack on your video/audio
equipment. We
recommend that you use the HDMI terminal which provides high quality digital audio and video on a
single connection. If you use the
other terminals/jacks, connect the video first. Then connect the audio.
•Video/audio terminal on this Player
rj) HDMI terminal
•Video jacks on this Player (Connect CD, ®, or @)
Page 9
Higher Quality
Standard Quality
(1" VIDEO OUT (COMPONENT)jacks
21 VIDEO OUT (S VIDEO) jack
(3) VIDEO OUT (VIDEO) jack
"""""'''
, P.
~~
~
P.
~
~
SVIOEO
Page 10
Page
11
Page 11
•Audio terminals/jacks on this Player (Connect CD, ®, or @)
DIGITAL OUT (COAXIAL!
OPTICAL) jack/terminal
.2; AUDIO OUT (8ch discrete) jacks
3) AUDIO OUT (MIXED 2CH) jacks
•Broadband Internet connection
NETWORK terminal
•USB device connection
USB BD STORAGE/SERVICE
terminal
8En
COAXIAL
o
lrDE020t
(0~
it§)
Page 12
Page 13
Page 13
Page 14
Page 14

. HDMI Connection
• C~onnecting to the HDMI Terminal
-You can enjoy high quality digital picture and sound through the HDMI terminal.
-Firmly connect an HDMI cable (commercially available) to the HDMI terminals (G) and @).
-See page 38 for information on the audio output formats.
-Use
HIGH SPEED HDMI cables that have the HOMI logo (as shown on the cover).
Cautiion!
Be sure to turn off this Player and the equipment before making any connections.
2
(")
o
z
z
m
(")
-l
(5
Z
This Player
@
G)I To HDMI terminal ~
f§l
~
Hint
-When using an HOMI output, 7.1 ch
Digital Output is available.
C1 ==-,
Hints
-You need to select the "HDMI" in "Settings"
- "Audio Video Settings" - "Video Out
Select" and "HDMI Output" in "Settings" -
"Audio Video Settings" - "Audio Out" to
output the video/audio signals from the HOMI
terminal. (page 31)
-Refer to the HDMI control function. (Page 18)
Notes
HDMI cable
(commercially available)
@I To HDMI input terminal ~
~
9
-When you connect this Player to an AV
receiver using the HOMI terminal. make sure
that the AV receiver is connected to aTV
using the HOMI terminal. If the TV is not
equipped with HOMI terminal, connect the
terminal/jacks of this Player other than the
HOM! terminal to the AV receiver for the
video/audio connections.
-When you connect the Player to a TV with an
HOM! cable, "HOM! Video Out" is set to
"Auto". If you don't get astable image, select
the desired resolution*.
When you set "HOMI Video Out" to asetting
other than
"Auto", you can only select
resolutions that are compatible with the
connected TV.
*Refer to "HOMI Video Out" on page 3 I
regarding the resolutions
of the HOMI video
output.
I
TV
AV receiver
HOM I
1- ca_b_l_e __ ---lDI
~§§~~
HOMI
cable
Projector
9 En

Video Connections
•Connecting to the Component Jacks
-You can enjoy accurate color reproduction and high quality images through the component jacks.
-Firmly connect a
component video cable (commercially available) to the component jacks (CD and CD).
Caution!
Be sure to turn off this Player and the equipment before making any connections.
This Player
Notes
(Blue)
(Red)
Component video cable
(commercially available)
2 To COMPONENT
@input jacks
COMPOtlENTIN
(Red)
~ po((§))
+
~P.@))
(Blue)
+
(Green) '!.@
(Green)
+
~II~
'= (0 ~'6i::-=' 0
Projector AV receiver TV
10 En
-You need to select "Component" in "Settings"-
"Audio Video Settings" -"Video Out Select" to
output the video signal from the
component
jacks. (See page 31.)
-When the priority video output
is set to "HOM]"
in "Video Out Select", the video resolution
which
is output from the COMPONENT jacks
is the one set in "HOMI Video Ouf'.
- When the output from the COMPONENT jacks
is prioritized, set the priority video output to
"Component" .
-
If you play back the image via VCR, the image
may deteriorate due to the copy guard function.
-
When you watch the program where copyright
is protected, we recommend that the Blu-ray
disc player be connected to
LCD TV directly or
via AV receiver.
>k···---I=~ol-*-'
~ =VCR = .t
Q -'_W_Y"c;~Tdi';'~~71y~"N"""'->' C')
Blu-ray Disc TV
Player "
~ "_w~~~~,_ ..• ~..J
AV receiver

Video Connections
•Connecting to the SVideo or Video Jack
Caution!
Be sure to turn off this Player and the equipment before making any connections.
-Connect either the S-video jack or video jack.
-Firmly connect aS-video cable (commercially available) to the S-video
jacks or avideo pin cable (supplied) to the
video
jacks (CD and @, or @and @).
(Yellow)
(')
o
z
z
m
(')
-l
o
Z
2
This Player
.......
iJ~tl~I~(0I~ @@,---,,=@,,-'''---,
~@:!~I~~""~~j
'3" I To VIDEO ~
\::V jack
~
This Player
fi\ To SVIDEO
\l.J .k
Jac
S-video cable
(colllmerciallyavailable)
Video pin cable (supplied)
To SVIDEO
@ inpuljack
..
To VIDEO
@. .k
IIlpUI Jac
..
(Yellow)
~
~
SVIOEO
VIDEO
(Yellow)
SVIOEO IN
AV INPUT
~.~.lgWc:l
Projector AV receiver TV
~"~
CL ~'6~:;~ ,0
Projector AV receiver TV
TV
Notes
-You need to select "Component" in "Settings" -
"Audio Video Settings" -"Video Out Select" to
output the video signal from the S-video/video jack.
(See page 31.)
-If you play back the image via VCR, the image may
deteriorate due to the copy guard function.
-When you watch the program where copyright is
protected, we recommend that the Blu-ray disc
player be connected to LCD
TV directly or via AV
receiver.
Q -~di;~~lly
Blu-ray Disc
Player
bo- __ .. , ~ _,, __ .........1
AV receiver I
11 En

Audio Connections
•Connecting to the Digital Audio JackfTerminal
-You can connect audio equipment or the TV to the DIGITAL OUT Jack/terminal.
-Firmly
connect adigital audio pin cable (commercially available) or optical cable (commercially available) to the
coaxial digital
audio jack or optical digital audio terminal (CD and (1), or @and 0).
- See page 38 for information on the audio output formats.
Caution!
Be sure to turn off this Player and the equipment before making any connections.
This Player This Player
[
To OPTICAL
terminal @
[
CD
, To COAXIAL
1 jack
Digital audio pin cable
(commercially available)
Optical cable
(commercially available)
.~ To COAXIAL
Winput jack
•
®
COAXIAL
To OPTICAL
input terminal 0
OPTICAL
AV INPUT DIGITAL AUDIO IN
~"8-0
~obi:=;~O 0
AVreceiver TV
~"~
~'bi:~o ~
AVreceiver TV
Hints
- When using COAXIAL/OPTICAL output, 5.1 ch Digital Output is available. 7.1 ch Digital Output is not available.
-You need to select
"Digital Output" in "Settings" - "Audio Video Settings" -"Audio Out" to output the audio signal
from the coaxial or optical jack/terminal. (See page 31.)
Note
- 7.1 ch Audio is available via the HDMI terminal or the 8ch discrete audio jacks.
12 En

Audio Connections
•Connecting to the Audio Jacks
-You can connect audio equipment or the TV to the AUDIO OUT Jacks.
-Firmly connect an audio pin cable (supplied) or audio pin cables (supplied for 2ch and commercially available for
the
other 6ch) to the 2ch audio jacks or 8ch discrete audio jacks (CD and @, or Q) and 0).
-See page 38 for information on the audio output formats. 2
Caution!
Be sure to turn off this Player and the equipment before making any connections.
This Player
-
~
~ll§,f§Ife)@I~ ~ ~ .0
~,~o~~®@~~ ,~<O
- - .I)DIOO(" 1I1DEOOUT
This Player
(")
o
z
z
m
(")
::::!
o
z
----1-- ---1-------------
To
AUDIO OUT
~
"3~
"3
~
"3 "3
To MIXED2CH
CD
:::T
et>
:::T
et>
:::T
et> et>
@
(8ch discrete)
~
B
~ ~-
B
~
BBoutput
jack
jacks
Audio pin cables
(supplied for 2ch and
commercially available
for the
other 6ch)
Audio pin cable
(supplied)
To
@MULTI CH
IN jacks
~.
"3
~
"3
~-
"3
O!
et>
:::T
et>
O!
et>
~
B
~
B
~-
B
,.
++ ++ + +
~
:::T
~---
+
To audio input 0
jack
,.
C£h'IER sueWOOfER SU~~OUtCleACK Sl.lRfl().fW FRONT
©)©) ~©) ®® ©)@)
AUDIO
C®C®
l R l A l R
(White)~ (White)~ (White)~
L R
(White)~
MULnCH IN
'--- ..... , --.J
§t~4i~I.~
AV receiver TV
AUDIO IN
§t14i::-='·~
AV receiver TV
Hints
-You can connect asubwoofer to the SUBWOOFER jack directly. When you connect TV to this Player directly.
connect an active subwoofer such as Yamaha Active Servo Processing Subwoofer System to this jack.
-You need to select
"7.lch Audio Output" in "Settings" - "Audio Video Settings" - "Audio Out" to output the audio
signal from the 8ch discrete jacks. (See page 31.)
-You need to select "2ch Audio Output" in "Settings" - "Audio Video Settings" - "Audio Out" to output the audio
signal from the 2ch audio jacks. (See page 31.) I
13 En

Broadband Internet Connection
•Connecting to the NETWORK terminal and USB BO STORAGE/SERVICE
terminal
-You can enjoy avariety of contents with interactive functions by connecting to the internet when playing BO-LIVE
compatible discs. Refer to pages 24 and 25 regarding further information on BO-LIVE functions.
-You can
connect a USB memory device (2GB or greater and formatted with FAT 32/16) to the USB BO
STORAGE/SERVICE terminal to save the Virtual Package/BO-LIVE data or to update the software of this Player.
-Firmly
connect anetwork cable (commercially available) and aUSB memory device (commercially available) to
the
NETWORK terminal and USB BO STORAGE/SERVICE terminal (CD and 0, and @).
-Use only an STP (shielded twisted pair) network cable.
-
When using the internet, a broadband internet connection as shown below is required.
Caution!
Be sure to turn off this Player and the equipment before making any connections.
This Player
@
~-F~~
0
"
r~-o-U-S-B-B-D-----'
STORAGE/SERVICE @
terminal
CD
" To NETWORK
terminal
Notes
~ When using a broadband internet
connection, a contract with an internet
service
provider is required. For more
details, contact your nearest internet service
provider.
-
Refer to the operation manual of the
equipment you have as the connected
equipment and connection method may
differ depending on your internet
environment.
-Use a network cable/router supporting
IOBASE- T/ IOOBASE- TX.
LAN
USB memory device
(commercially available)
Network cable
(commercially available)
To LAN terminal 0
Internet Modem Hub or
broadband router
After connecting
-Perform the communication setting. (Page 34-36)
-Load a BO-LIVE compatible disc and play back the contents. (Page 20-24)
14 En

Other Connections
•Connecting to the REMOTE
CONTROL jacks
Caution!
Be sure to turn off this Player and the
equipment before making any
connections.
(')
o
z
z
m
(')
-t
5
z
2
A~
,9)
~ ~ To AC IN "emi",' •
To AC outlet
Note
- TO PREVENT RISK OF ELECTRIC SHOCK, DO
NOT TOUCH THE UN-INSULATED PARTS OF
ANY CABLES WHILE THE POWER CABLE IS
CONNECTED.
•Connecting the power cable
-Plug the supplied power cable into the AC IN
terminal on the rear
of the Player. Then plug into AC
outlet.
To REMOTE
CONTROL (IN) @
jack
This Player
-You can transmit the remote control signals by
connecting to the REMOTE
CONTROL (OUT/IN)
jacks.
-Firmly connect 3.5mm mini plug cables
(commercially available) to the
REMOTE
CONTROL (OUT/IN) jacks (CD and @, or@ and
@).
To REMOTE
CD CONTROL
(OUT) jack
"""
... COAXlloL
~~
~Q§
- .... OEOOUT
3.5mm mini plug
cable
(commercially
available)
3.5mm mini plug cable
(commercially available)
To remote
@control in
jack
To remote
control out @
jack
REMOTE CONTROL IN
REMOTE CONTROL OUT
@@
Infrared signal receiver
or Yamaha component
(such as AV receiver)
Hint
-The RS-232C terminal is acontrol expansion
terminal for commercial use. Consult your dealer for
details. I
15 En

Before Starting Playback
•Loading the Batteries in the
Remote Control
1,--,-=··. ~~_r~~L--II~'. ----,-,--,-11
e CD
c=m
cc:=3
CD e
CD Press the II~ part and slide the battery compartment
cover off.
CV Insert the two supplied batteries (AAA, R03, UM-4),
following the indications
(+/-) on the inside of the
compartment.
@Slide the cover back until it snaps into place.
•Turning the Power On
o
OPfNiCLOSE DIMMER VIDEO-RESET
c::J c::J c::J
SUBTITLE AUDIO ANGLE
c::J c::J c::J
Turning the power on
Press C9 on the remote control or on the Player to turn on
the
power of the Player.
Note
Entering standby
Press C9 on the remote control or on the Player to enter
standby.
Notes
-Do not subject the remote control unit to shock,
water
or excessive humidity.
-
The remote control unit may not function if the
Player's remote sensor is
in direct sunlight or any
other strong light.
-Incorrect use
of batteries may cause them to leak or
burst. Read the battery warnings and use the
batteries properly.
-Do not mix old and new batteries,
or mix different
brands.
-Remove the batteries
if you will not use the remote
control unit for an extended period
of time.
[ F' 0 td
,.... r". .••. •1
l::.f·:: U I'··j J
___ J
Approximate operating range of
remote control
Remote control sensor
6m(20 ft)
16 En
-If you press C9 again immediately after entering
standby, the Player may not turn on.
If this happens,
wait for
10 seconds or more and then turn on the
power again.
•Indicators on the front panel
display
indicator Descriptions
SD Lights up when playing back aSD disc.
DVD Lights up when playing back aDVD-
Video disc.
CD Lights up when playing back aCD.
~
Lights up when playing back.
II
Lights up when pausing.
TITLE Lights up when playing back a
SD disc
or DVD.
CHPITRK Lights up when playing back a
SD disc,
DVD, or CD.
REP SLights up when playing back track or
chapter repeatedly.