Yamaha YHT-299 Instruction Manual

English
YHT-299 Home Theater Package
Connection Guide RGLH
Printed in China ZG07290
©
2013 Yamaha Corporation
The Yamaha YHT-299 Home Theater Package includes everything you need to add great sound
to your home theater. By following the steps in this Connection Guide, you’ll have your home
theater set up in no time and be enjoying music and movies like never before. Part A explains how
to connect the speakers and antennas. Part B explains how to connect various AV components.
See the relevant owner’s manuals for full instructions and precautions.
Caution: Disconnect all components from AC outlets before proceeding.
Part A: Speakers and Antennas
1
PHONES
SILENT
CINEMA
TONE
CONTROL
STRAIGHT
VOLUME
TV
BD
DVD
CD
RADIO
INPUT PROGRAM
SCENE
INFO
MEMORY
PRESET
FM AM
TUNING
YPAOMIC
VIDEO
AUX
VIDEO
5V 1A
AUDIO
Unpack and check the package contents. The following items are necessary to complete this
Connection Guide. See the owner’s manuals for a complete list of supplied items.
AV Receiver (HTR-3066)
Remote control and two batteries
(AAA, R03, UM-4)
YPAO microphone
AM loop antenna
Indoor FM antenna (FM antenna type
depends on destination country.)
Subwoofer (NS-SW20)
Front/surround speaker (NS-B20)
Center speaker (NS-C20)
Non-skid pad
Subwoofer cable
Speaker cable
Checking the package contents
x 4
2
The four front and surround
speakers are identical, so it
doesn’t matter which one you use
in each position.
Position the speakers as shown.
See the owner’s manuals for more
information on installing the
speakers.
Positioning the speakers
Front
left
Front
right
Subwoofer
Surround
left
Surround
right
Center
3
• Cut the included speaker cable to suitable lengths for the front, center, and surround
speakers. You need to make five cables altogether. Remove about 10 mm (3/8 in.) of
insulation from the end of each cable, and then twist the bare strands tightly.
• Connect the speaker cables to the front speakers ( ), surround speakers ( ), and center
speaker ( ). Make sure you connect the speakers with the correct polarity—positive (+)
terminals to positive (+) terminals, and negative (–) terminals to negative (–) terminals.
Front, surround
speakers
Preparing the cables and speakers
Center speaker
COMPONENT
VIDEO
P R
P B
Y
OPTICAL
(TV)
AV1AV 2AV 3 AV 4AV5
AUDIO1 AUDIO2
COAXIAL
(CD)
COAXIAL OPTICAL
VIDEO
CENTER SURROUND
HDMI1
(BD/DVD)
HDMI2 HDMI 3
HDMI4
FRONT
COMPONENT
VIDEO
MONITOROUT
P R
P B
Y
HDMI
OUT
MONITOROUT
AV
OUT
SUBWOOFER
PREOUT
AUDIO
OUT
SPEAKERS
ANTENNA
FM AM
ARC
4AV Receiver
Connect the front speaker ( ) cables to the AV Receiver. Make sure you connect the
speakers with the correct polarity—positive (+) terminals to positive (+) terminals, and
negative (–) terminals to negative (–) terminals.
To front left
speaker
To front right
speaker
Connecting the front speakers
Connecting the center and surround speakers
COMPONENT
VIDEO
P R
P B
Y
OPTICAL
(TV)
AV 1 AV 2 AV 3 AV 4 AV 5
AUDIO 1 AUDIO 2
COAXIAL
(CD)
COAXIAL OPTICAL
VIDEO
CENTER
HDMI1
(BD/DVD)
HDMI2 HDMI 3
HDMI4
FRONT
COMPONENT
VIDEO
MONITOROUT
P R
P B
Y
HDMI
OUT
MONITOROUT
AV
OUT
SUBWOOFER
PREOUT
AUDIO
OUT
SURROUND
SPEAKERS
ARC
2
2
3
3
1
1
ANTENNA
FM AM
5AV Receiver
Connect the center speaker ( ) and surround speaker ( ) cables to the AV Receiver.
Make sure you connect the speakers with the correct polarity—positive (+) terminals
to positive (+) terminals, and negative (–) terminals to negative (–) terminals.
To surround
right speaker
To center
speaker
To surround
left speaker
COMPONENT
VIDEO
P R
P B
Y
OPTICAL
(TV )
AV 1 AV 2 AV 3 AV 4 AV 5
AUDIO1 AUDIO 2
COAXIAL
(CD)
COAXIAL OPTICAL
VIDEO
CENTER SURROUND
HDMI1
(BD/DVD)
HDMI2 HDMI 3
HDMI4
FRONT
COMPONENT
VIDEO
MONITOROUT
P R
P B
Y
HDMI
OUT
MONITOROUT
AV
OUT
SUBWOOFER
PREOUT
AUDIO
OUT
SPEAKERS
ANTENNA
FM AM
ARC
SUBWOOFER
PRE OUT
AV Receiver
6
Subwoofer
Use the included subwoofer cable ( ) to connect the Subwoofer’s INPUT jack to the
AV Receiver’s SUBWOOFER PRE OUT jack.
Connecting the subwoofer
Subwoofer
cable
Connecting the antennas
ANTENNA
FM AM
COMPONENT
VIDEO
P R
P B
Y
OPTICAL
(TV)
AV 1 AV 2 AV 3 AV 4 AV 5
AUDIO 1 AUDIO 2
COAXIAL
(CD)
COAXIAL OPTICAL
VIDEO
CENTER SURROUND
HDMI1
(BD/DVD)
HDMI2 HDMI 3
HDMI4
COMPONENT
VIDEO
MONITOROUT
P R
P B
Y
MONITOROUT
AV
OUT
SUBWOOFER
PREOUT
AUDIO
OUT
75
SPEAKERS
HDMI
OUT
ARC
FRONT
ANTENNA
FM AM
75
7AV Receiver
Connect the AM loop antenna ( ) and indoor FM antenna ( ) to the AV Receiver,
as shown. See the owner’s manuals for more information about connecting antennas.
Indoor FM
antenna
AM loop antenna
Press and
hold Insert Release
Connecting the AM loop antenna
Caution: Disconnect all components from AC outlets before proceeding.
Part B: AV Components
Connecting HDMI-capable components
COMPONENT
VIDEO
P R
P B
Y
OPTICAL
(TV)
AV1 AV 2 AV3 AV 4 AV 5
AUDIO1 AUDIO 2
COAXIAL
(CD)
COAXIAL OPTICAL
VIDEO
CENTER SURROUND
HDMI1
(BD/DVD)
HDMI2 HDMI 3
HDMI4
FRONT
COMPONENT
VIDEO
MONITOROUT
P R
P B
Y
HDMI
OUT
MONITOROUT
AV
OUT
SUBWOOFER
PREOUT
AUDIO
OUT
SPEAKERS
ANTENNA
FM AM
ARC
HDMI
IN
HDMI 1
(BD/DVD)
HDMI 2 HDMI 3
HDMI
OUT
1
AV Receiver TV
If your TV and BD/DVD players or recorders or satellite/cable set-top box have HDMI
jacks, you can connect them via the AV Receiver. Using HDMI cables (not included),
connect the AV Receiver’s HDMI OUT jack to an HDMI input on your TV, and
connect your BD/DVD players or recorders and satellite/cable set-top box to the AV
Receiver’s HDMI 1(BD/DVD) and HDMI 2 jacks, respectively, as shown.
See the owner’s manuals for more information about HDMI.
●Connecting your TV
●Connecting your BD/DVD players or recorders,
satellite/cable set-top box
COMPONENT
VIDEO
P R
P B
Y
OPTICAL
(TV )
COAXIAL
(CD)
COAXIAL OPTICAL
VIDEO
CENTER SURROUND
HDMI4
FRONT
COMPONENT
VIDEO
MONITOROUT
P R
P B
Y
HDMI
OUT
MONITOROUT
AV
OUT
SUBWOOFER
PREOUT
AUDIO
OUT
SPEAKERS
ANTENNA
FM AM
ARC
AV 1 AV 2 AV 4 AV 5
AUDIO1 AUDIO 2
AV 3
HDMI
OUT
HDMI
OUT
AV Receiver Satellite/cable set-top box
BD/DVD players or
recorders
COMPONENT
VIDEO
P R
P B
Y
OPTICAL
(TV)
AV 1 AV 2 AV 3AV 4 AV 5
AUDIO 1 AUDIO2
COAXIAL
(CD)
COAXIAL OPTICAL
VIDEO
CENTER SURROUND
HDMI1
HDMI2 HDMI 3
HDMI4
FRONT
COMPONENT
VIDEO
MONITOROUT
P R
P B
Y
MONITOROUT
AV
OUT
SUBWOOFER
PREOUT
AUDIO
OUT
(BD/DVD)
HDMI
OUT
SPEAKERS
ANTENNA
FM AM
ARC
AUDIO OUTPUT
(TV )
(CD)
COAXIAL OPTICAL
AV 4AV 3AV 5
OPTICAL
2
AV Receiver TV
You can listen to TV audio through the AV Receiver and speakers by connecting an
audio output on your TV to an audio input on the AV Receiver with, for example, an
optical digital audio cable (not included), as shown.
To listen to TV audio, select the appropriate input source on the AV Receiver.
Connecting your TV for audio output
Your TV supports the Audio Return Channel function and HDMI Control
function
• If your TV supports ARC (Audio Return Channel), this connection is
unnecessary.
• The Audio Return Channel is required the setting of HDMI function of the AV
Receiver before use.
• For the connections and settings, refer to “Connection Method 1 (HDMI
Control/ARC-compatible TV)” (See HTR-3066 Owner's Manual).
• Connect the AV Receiver, Subwoofer, and your other AV components to suitable AC outlets.
• Turn on the AV Receiver first, then the Subwoofer and your other AV components.
• Install the batteries in the AV Receiver’s remote control.
• The optimum crossover frequency setting on the AV receiver is 150–160 Hz.
• See the relevant owner’s manuals for full operating instructions.
Time to enjoy your Yamaha Home Theater Package!
Now, relax and enjoy the great sound of your Yamaha Home Theater Package.
MONITOROUT
COMPONENT
VIDEO
P R
P B
Y
OPTICAL
(TV)
AV1 AV 2AV3AV 4AV 5
AUDIO1 AUDIO 2
COAXIAL
(CD)
COAXIAL OPTICAL
VIDEO
CENTER SURROUND
HDMI1
HDMI2 HDMI 3
HDMI4
FRONT
COMPONENT
VIDEO
MONITOROUT
P R
P B
Y
AV
OUT
SUBWOOFER
PREOUT
AUDIO
OUT
(BD/DVD)
HDMI
OUT
SPEAKERS
ANTENNA
FM AM
ARC
VIDEO
AUDIO
R
R
L
L
VIDEO
IN
OUT
(TV )
AV 4 AV 5
AUDIO 1
OPTICAL
MONITOR O
AV
OUT
MONITOR OUT
3AV Receiver TV
Use a video pin cable (not included) to connect the AV Receiver’s MONITOR OUT
jack to a composite video input on your TV, as shown.
Use AV pin cables (not included) to connect your DVR (digital video recorder) or
VCR to the AV Receiver’s AV 5 and AV OUT jacks, as shown.
Connecting your DVR/VCR
DVR/VCR
Connecting your CD player
COMPONENT
VIDEO
P R
P B
Y
OPTICAL
(TV)
AV 1 AV 2 AV 3 AV 4 AV 5
AUDIO 1 AUDIO2
COAXIAL
(CD)
COAXIAL OPTICAL
VIDEO
CENTER SURROUND
HDMI1
HDMI2 HDMI 3
HDMI4
FRONT
COMPONENT
VIDEO
MONITOROUT
P R
P B
Y
MONITOROUT
AV
OUT
SUBWOOFER
PREOUT
AUDIO
OUT
(BD/DVD)
HDMI
OUT
SPEAKERS
ANTENNA
FM AM
ARC
(TV )
AV 4
OPTICAL
COMPONENT
VIDEO
Y
OPTICAL
AV 1 AV 2 AV 3 AV 5
COAXIAL
(CD)
COAXIAL
VIDEO
COAXIAL
4AV Receiver CD player
Use a digital coaxial cable (not included) to connect your CD player to the AV
Receiver’s AV 3 COAXIAL(CD) jack, as shown.
Connecting your USB storage device or iPod
5AV Receiver iPod
Connect a USB storage device or a USB cable supplied with the iPod to the AV Receiver's
USB jack (on the front panel), as shown.
YPAOMIC
INFO
MEMORY PRESET FM AM TUNING
PHONES
SILENT
CINEMA
VIDEO
VOLUME
AUX
TONE CONTROL
STRAIGHT
TV
BD
DVD
CD
RADIO
INPUT PROGRAM
SCENE
VIDEO 5V 1A
AUDIO
USB storage device
Almost Finished