Yamaha Studio Manager v.2 User manual

Studio Manager V2 Installation Guide
Studio Manager V2 Installationshandbuch
Studio Manager V2 Manuel d’installation
Studio Manager V2 Guía de Instalación
DIGITALMIXING CONSOLE
///
DIGITALMIXING CONSOLE
Studio Manager V2 Installation Guide (for DM2000/02R96/DM1000/01V96) 1
DEUTSCHFRANÇAISESPAÑOL ENGLISH
Special Notices
• The software and this manual are the exclusive copyrights of
Yamaha Corporation.
• Use of the software and this manual is governed by the
Software Licensing Agreement which the purchaser fully
agrees to upon breaking the seal of the software packaging.
(Carefully read the agreement at the end of this manual before
installing the software.)
• Copying of the software or reproduction of this manual in
whole or in part by any means is expressly forbidden without
the written consent of the manufacturer.
• Yamaha makes no representations or warranties with regard
to the use of the software and documentation and cannot be
held responsible for the results of the use of this manual and
the software.
• This disc is a CD-ROM. Do not attempt to play the disc on an
audio CD player. Doing so may result in irreparable damage
to your audio CD player.
• Copying of the commercially available music sequence data
and/or digital audio files is strictly prohibited except for your
personal use.
• The screen displays as illustrated in this manual are for
instructional purposes, and may appear somewhat different
from the screens which appear on your computer.
• Future upgrades of application and system software and any
changes in specifications and functions will be announced
separately.
• Specifications and descriptions in this installation guide are
for information purposes only. Yamaha Corp. reserves the
right to change or modify specifications at any time without
prior notice. Since specifications may not be the same in every
locale, please check with your Yamaha dealer.
• The company names and product names in this installation
guide are the trademarks or registered trademarks of their
respective companies.
* OMS is a trademark of Opcode Systems, Inc.
* SmartMedia is a trademark of Toshiba Corporation.
Yamaha Professional Audio web site:
http://www.yamahaproaudio.com/
Contents
Getting Started............................................. 2
Introduction..................................................... 2
CD-ROM Contents........................................... 2
Windows System Requirements........................ 4
Macintosh System Requirements...................... 4
System Hookup................................................ 5
Configuring Your Yamaha Mixing Console....... 5
Caution when using a USB connection............. 5
Windows Installation.................................... 5
Adobe Reader .................................................. 5
USB MIDI Driver............................................... 5
Installing Yamaha CBX Driver (DM2000/02R96
only) ................................................................ 8
Installing an Editor ........................................... 8
Installing Studio Manager ................................ 8
Installing Card Filer (DM2000 only).................. 8
Macintosh Installation .................................. 9
Adobe Reader .................................................. 9
OMS (Open Music System) .............................. 9
USB MIDI Driver.............................................. 10
Installing an Editor .......................................... 11
Installing Studio Manager ............................... 11
Installing Card Filer (DM2000 only)................. 11
Setting Up OMS.............................................. 11
Getting Started............................................ 12
Overview of Studio Manager........................... 12
Starting and setting up Studio Manager.......... 13
Troubleshooting .......................................... 14
SOFTWARE LICENSING AGREEMENT.......... 15

Studio Manager V2 Installation Guide (for DM2000/02R96/DM1000/01V96)
2
Introduction
Yamaha Studio Manager enables you to control your Yamaha mixing console from a Windows or Macintosh computer.
This Installation Guide explains how to install Studio Manager and the necessary driver software for Windows and Macintosh computers.
For information on how to use Studio Manager and the various editors, refer to the PDF format Studio Manager manual and the manuals
for the various editors which are installed on your computer when Studio Manager is installed. Refer to the owner’s manuals for your
devices for information on operating the devices.
CD-ROM Contents
CD-ROM included with the DM2000/02R96
Getting Started
Folder Software Description
Windows
SM_\DM2k_ DM2000 Editor1
1. For information on using this software, refer to the PDF manual after installation.
DM2000 Editor for Studio Manager (for Windows 2000/XP).
SM_\02R96_ 02R96 Editor102R96 Editor for Studio Manager (for Windows 2000/XP).
SM_\SM2_ Studio Manager1Yamaha Studio Manager (for Windows 2000/XP).
Mididrv_ Yamaha CBX Driver Yamaha serial driver. Necessary if you are connecting to a serial
port on your computer.
USBdrv_ Yamaha USB MIDI Driver
(Windows 98, Me) Yamaha USB driver. Necessary if you are connecting to a USB
port on your computer.
USBdrv2k_ Yamaha USB MIDI Driver
(Windows 2000, XP)
Card_ Card Filer1Yamaha utility for transferring and managing data stored on
the DM2000’s SmartMedia card.
Macintosh
Mac OS X
\SM_\DM2k_ DM2000 Editor1DM2000 Editor for Studio Manager (for Mac OS X).
Mac OS X
\SM_\02R96_ 02R96 Editor102R96 Editor for Studio Manager (for Mac OS X).
Mac OS X
\SM_\SM2_ Studio Manager1Yamaha Studio Manager (for Mac OS X).
Mac OS 9\OMS_
Open Music System (OMS) 2.3.81, 2
2. This software is not supported by Yamaha.
Opcode driver software for use with MIDI applications on Mac-
intosh computers (Mac OS 9 or earlier).
OMS Setup for YAMAHA OMS studio setup files for use with the DM2000 and 02R96
(Mac OS 9 or earlier).
Mac OS 9\USBdrv_ YAMAHA USB MIDI Driver Yamaha USB driver. Necessary if you are connecting to a USB
port on your Macintosh computer.
Mac OS X\USBdrv_ YAMAHA USB MIDI Driver for OS X
Mac OS 9\Card_ Card Filer1Yamaha utility for transferring and managing data stored on
the DM2000’s SmartMedia card (Mac OS 9 or earlier).

Studio Manager V2 Installation Guide (for DM2000/02R96/DM1000/01V96) 3
ENGLISH
CD-ROM included with the DM1000/01V96
Folder Software Description
Windows
SM_\DM1000_ DM1000 Editor1DM1000 Editor for Studio Manager (for Windows 2000/XP).
SM_\01V96_ 01V96 Editor101V96 Editor for Studio Manager (for Windows 2000/XP).
SM_\SM2_ Studio Manager1Yamaha Studio Manager (for Windows 2000/XP).
USBdrv_ Yamaha USB MIDI Driver
(Windows 98, Me) Yamaha USB driver. Necessary if you are connecting to a USB
port on your computer.
USBdrv2k_ Yamaha USB MIDI Driver
(Windows 2000, XP)
Macintosh
Mac OS X
\SM_\DM1000_ DM1000 Editor1DM1000 Editor for Studio Manager (for Mac OS X).
Mac OS X
\SM_\01V96_ 01V96 Editor101V96 Editor for Studio Manager (for Mac OS X).
Mac OS X
\SM_\SM2_ Studio Manager1Yamaha Studio Manager (for Mac OS X).
Mac OS 9\OMS_
Open Music System (OMS) 2.3.81, 2 Opcode driver software for use with MIDI applications on Mac-
intosh computers (Mac OS 9 or earlier).
OMS Setup for YAMAHA OMS studio setup files for use with the DM1000 and 01V96
(Mac OS 9 or earlier).
Mac OS 9\USBdrv_ YAMAHA USB MIDI Driver Yamaha USB driver. Necessary if you are connecting to a USB
port on your Macintosh computer.
Mac OS X\USBdrv_ YAMAHA USB MIDI Driver for OS X
1. For information on using this software, refer to the PDF manual after installation.
2. This software is not supported by Yamaha.

Studio Manager V2 Installation Guide (for DM2000/02R96/DM1000/01V96)
4
Windows System Requirements
The system requirements of your operating system may differ
from those listed here.
Studio Manager
Card Filer (DM2000 only)
Yamaha USB MIDI Driver
Yamaha CBX Driver (DM2000/02R96 only)
System requirements for software not listed here can be found
on the CD-ROM.
You can check the latest version information of each program/
driver and its system requirements at the following website:
http://www.yamahaproaudio.com/
Macintosh System Requirements
The system requirements of your operating system may be
different to those listed here.
Studio Manager
Card Filer (DM2000 only)
Yamaha USB MIDI Driver
Yamaha USB MIDI Driver for OS X
System requirements for software not listed here can be found
on the CD-ROM.
You can check the latest version information of each program/
driver and its system requirements at the following website:
http://www.yamahaproaudio.com/
Computer A computer with a 800 MHz or faster Intel Pen-
tium or Celeron family processor
OS Windows 2000, XP Home Edition, XP Profes-
sional
Memory 256 MB or more
Hard Disk 30 MB or more of free space
MIDI Driver USB, MIDI, Serial, or mLAN (depending on the
connection between the console and the com-
puter)
Display
1024 x 768 pixels, 256 colors or higher
1280 x 1024, High Color 16-bit recommended
(If you use display settings of 1024 x 768, turn
on the Task Bar’s Auto-hide option.)
Computer A computer with a 100 MHz or faster Intel Pen-
tium or Celeron family processor
OS Windows 95, 98, 98SE, Me, NT4.0, 2000, XP
Home Edition, XP Professional
Memory 8 MB or more
Hard Disk 2 MB or more of free space
Display 800 x 600 pixels, 256 colors or higher
Computer A computer with a 166 MHz or faster Intel Pen-
tium or Celeron family processor and a USB
port
OS Windows 98, 98SE, Me, 2000, XP Home Edi-
tion, XP Professional
Memory 32 MB or more
Hard Disk 2 MB or more of free space
OS Windows 95, 98, 98SE, Me, NT4.0, 2000, XP
Home Edition, XP Professional
Computer A Macintosh G4 or better and a USB port
OS Mac OS X 10.2 or later
Memory 512 MB or more of free memory
Hard Disk 30 MB or more of free space
Display 1024 x 768 pixels, 256 colors or higher
1280 x 1024, 32,000 colors recommended
MIDI Driver USB, MIDI, Serial, or mLAN (depending on the
connection between the console and the com-
puter)
Computer A Macintosh computer with a PowerPC proces-
sor or better
OS Mac OS 7.5 to 9.2.2 (Mac OS X not supported)
Memory 8 MB or more of free memory
Hard Disk 6 MB or more
Display 800 x 600 pixels, 256 colors or higher
Computer A Macintosh computer with a PowerPC proces-
sor or better and a USB port
OS Mac OS 8.6 to 9.2.2 (Mac OS X not supported)
Memory 64 MB or more (recommended: 128 MB or
more)
Hard Disk 2 MB or more
Computer A Macintosh computer with a PowerPC proces-
sor or higher and a USB port
OS Mac OS X 10.2 or later
Memory 64 MB or more (recommended: 128 MB or
more)
Hard Disk 2 MB or more

Studio Manager V2 Installation Guide (for DM2000/02R96/DM1000/01V96) 5
ENGLISH
System Hookup
The following illustration shows the available hookup methods
you can use to connect your Yamaha mixing console to your
computer: serial, USB, MIDI.
Configuring Your Yamaha Mixing
Console
Press the DISPLAY ACCESS [SETUP] button to open the MIDI/
TO HOST Setup page. Under “Studio Manager,” select a port
and assign an ID to your Yamaha mixing console. If you’ve
connected the DM2000/02R96 to the serial port, set the TO
HOST SERIAL options as appropriate (i.e., “PC-2” for a
Windows PC, or “Mac” for a Macintosh computer).
Caution when using a USB connection
If you’ve used the USB TO HOST connector to connect to your
computer, you must perform the following actions. If you fail to
do so, your computer or the connected mixing console may
hang up, causing data damage or loss. If your computer or
mixing console hangs up, turn off the power, and restart your
computer.
• Disable the energy conservation mode (suspend/sleep/
standby/hibernate) on your computer before connecting your
computer via the USB TO HOST connector.
• Connect the USB TO HOST connector to your computer
before powering-on the mixing console.
• Close all application programs (such as StudioManager)
before powering the mixing console on/off or connecting/
disconnecting the USB cable.
• Wait at least three seconds between turning the mixing
console on or off, and between connecting and disconnecting
the USB cable.
Adobe Reader
Adobe Reader (available free of charge) must be installed on
your computer in order for you to view the PDF format manuals
for Studio Manager and the various editors. If you don’t have
Adobe Reader, access the Adobe Corporation website at the URL
shown below, and download Adobe Reader.
http://www.adobe.com
USB MIDI Driver
If you are connecting your Yamaha mixing console to a USB
port on your computer, you’ll need to install the Yamaha USB
driver. If you already have this driver installed, skip this section.
The procedure you use for installing the Yamaha USB driver
depends on which version of Windows you’re using:
• Windows 98 & 98SE: See page 6
• Windows Me: See page 7
• Windows 2000: See page 7
• Windows XP: See page 8
NOTE: Before you connect to serial or MIDI ports, turn off your
Yamaha mixing console and computer.
Warning: Do not set the TO HOST SERIAL option to “Mac” while
your Yamaha mixing console is connected to your computer’s serial
port. Doing so may damage your computer.
USB cable
(Yamaha CCJ-Mac
or equivalent)
(Yamaha CCJ-PC2
or equivalent)
USB port
Serial cable
Mac serial port
PC serial port
Yamaha mixing console rear panel Mac or PC
MIDI interface
MIDI cables
3. MIDI
2. USB
1. Serial
(DM2000/02R96 only)
TO HOST
USB
INOUT
Windows Installation
NOTE: Studio Manager is supported by only Windows 2000/XP.
The driver for Windows 98/98SE/Me is necessary if you use other
MIDI applications on Windows 98/98SE/Me.
Studio
Manager
Yamaha
mixing console
Computer
USB cable
Driver

Studio Manager V2 Installation Guide (for DM2000/02R96/DM1000/01V96)
6
Windows 98 & 98SE
1Start your computer and Windows, and then
insert the included CD-ROM into your computer’s
CD-ROM drive.
2Turn off your Yamaha mixing console, and then
use a USB cable to connect its USB TO HOST port
to a USB port on your computer.
3Turn on your Yamaha mixing console.
The “Add New Hardware Wizard” appears. If it doesn’t
appear, try disconnecting and reconnecting the USB cable.
Alternatively, open the Add New Hardware control panel.
4Click [Next].
The following window appears.
5Select “Search for the best driver for your device
(Recommended),” and then click [Next].
The following window appears.
6Select “Specify a location,” and specify
“D:\USBdrv_” (replacing “D” with the drive letter
of your CD-ROM drive), and then click [Next].
When the driver is located, “YAMAHA USB MIDI Driver”
is displayed, as shown below.
7Click [Next].
The driver is installed, and the following window appears
when the installation is complete.
8Click [Finish], and then restart your computer.
NOTE: You may be prompted to insert your Windows
CD-ROM. Do not insert it! Click [OK], and in the “Copy files
from” section of the subsequent dialog box, enter
“D:\USBdrv_” (replacing “D” with the drive letter of your
CD-ROM drive), and then click [OK].

Studio Manager V2 Installation Guide (for DM2000/02R96/DM1000/01V96) 7
ENGLISH
Windows Me
1Start your computer and Windows, and then
insert the included CD-ROM into your computer’s
CD-ROM drive.
2Turn off your Yamaha mixing console, and then
use a USB cable to connect its USB TO HOST port
to a USB port on your computer.
3Turn on your Yamaha mixing console.
The “Add New Hardware Wizard” appears. If it doesn’t
appear, try disconnecting and reconnecting the USB cable.
Alternatively, open the Add New Hardware control panel.
4Select “Automatic search for a better driver
(Recommended),” and then click [Next].
Windows Me should be able to locate the driver
automatically, in which case you can proceed to Step 5. If
the driver cannot be located, select “Specify the location of
the driver (Advanced),” click [Next], specify your CD-
ROM drive (e.g., D:\USBdrv_), and then continue as
prompted.
The following window appears when the installation is
complete.
5Click [Finish], and then restart your computer.
Windows 2000
1Start your computer to launch Windows, then log
in as Administrator.
2Insert the included CD-ROM into your computer’s
CD-ROM drive.
3Go to My Computer–>Control Panel–>System–
>Hardware–>Driver Signing–>File Signature
Verification, select “Ignore—Install all files,
regardless of file signature,” and then click [OK].
4Turn off your Yamaha mixing console, and then
use a USB cable to connect its USB TO HOST port
to a USB port on your computer.
5Turn on your Yamaha mixing console.
The “Found New Hardware Wizard” appears.
6Click [Next].
7Select “Search for a suitable driver for my device
(Recommended),” and then click [Next].
8In the subsequent window, select “CD-ROM
drives” only, and then click [Next].
The driver is installed, and the message “Completing the
Found New Hardware Wizard” appears.
9Click [Finish], and then restart your computer.
NOTE: You may be prompted to insert your Windows
CD-ROM. Do not insert it! Click [OK], and in the “Copy files
from” section of the subsequent dialog box, enter
“D:\USBdrv2k_” (replacing “D” with the drive letter of your
CD-ROM drive), and then click [OK].

Studio Manager V2 Installation Guide (for DM2000/02R96/DM1000/01V96)
8
Windows XP
1Start your computer to launch Windows, then log
in as Administrator.
2Insert the included CD-ROM into your computer’s
CD-ROM drive.
3Click the [Start] button, and then click [Control
Panel].
The following window appears.
4Click [Switch to Classic display] in the left column
in the window to display all items in the Control
Panel.
5Go to System Hardware–>Driver signatures–
>Driver signature options, select “Ignore—Install
software without asking for confirmation,” and
then click [OK].
6Click [OK] to close the “System Properties”
window, and then click the Close button to close
the “Control Panel” window.
7Turn off your Yamaha mixing console, and then
use a USB cable to connect its USB TO HOST port
to a USB port on your computer.
8Turn on your Yamaha mixing console.
The “Found New Hardware Wizard” appears.
9Select “Install software automatically
(recommended) (I),” and then click [Next].
The driver is installed, and the message “Completing the
Found New Hardware Wizard” appears.
10 Click [Finish], and then restart your computer.
Installing Yamaha CBX Driver
(DM2000/02R96 only)
If you’re connecting your Yamaha mixing console to a serial port
on your computer, you’ll need to install the Yamaha CBX driver.
If you already have this driver installed, skip this section.
1Double-click the “Mididrv_” folder on the
CD-ROM.
2Double-click “Setup.exe.”
3Follow the on-screen instructions to install the
software.
Installing an Editor
You must install an Editor that supports your console before you
install Studio Manager.
1Double-click the “SM_” folder on the CD-ROM.
2Double-click the folder for the mixing console
you’re using (for the DM2000, this is “DM2K_”).
3Double-click “Setup.exe.”
4Follow the on-screen instructions to install an
Editor that supports your console.
Installing Studio Manager
After you install an Editor, install Studio Manager.
1Double-click the “SM_” folder on the CD-ROM.
2Double-click the “SM2_” folder.
3Double-click “Setup.exe.”
4Follow the on-screen instructions to install Studio
Manager.
Installing Card Filer (DM2000 only)
1Double-click the “Card_” folder on the CD-ROM.
2Double-click “Setup.exe.”
3Follow the on-screen instructions to install the
software.
For information on using Card Filer, see the
“CardFilerManual.pdf.” This file is installed in the same
folder as Card Filer.
NOTE: If you install an Editor and Studio Manager that support
another device, an older version of Studio Manager may be installed
and Studio Manager may not operate correctly. In this case, install
the correct version of Studio Manager from this CD-ROM, or
download the latest version of Studio Manager from the Yamaha
website.

Studio Manager V2 Installation Guide (for DM2000/02R96/DM1000/01V96) 9
ENGLISH
Adobe Reader
Adobe Reader (available free of charge) must be installed on
your computer in order to view the PDF format manual for
Card Filer. If you don’t have Adobe Reader, access the Adobe
Corporation website at the URL shown below, and download
Adobe Reader.
http://www.adobe.com
OMS (Open Music System)
OMS enables you to use MIDI applications on a Macintosh
computer with Mac OS 9 or earlier. If you already have OMS
2.3.3 or later installed, skip this section.
1Start your Macintosh, and then insert the included
CD-ROM into your computer’s CD-ROM drive.
2Double-click the “Mac OS 9” folder on the CD-
ROM.
3Double-click the “OMS_” folder on the CD-ROM.
4Double-click “Install OMS 2.3.8.”
5Follow the on-screen instructions to install the
software.
6When the installation is complete, click [Restart].
7Copy the “OMS_2.3_Mac.pdf” from the “OMS_”
folder on the CD-ROM to the “Opcode:OMS
Applications” folder on your hard disk.
This file contains information on using and configuring
OMS.
USB MIDI Driver
If you’re connecting your Yamaha mixing console to a USB port
on your computer, you’ll need to install the Yamaha USB driver.
If you already have this driver installed, skip this section.
The procedure for installing the USB driver varies with different
Macintosh OS versions.
• Mac OS 8.6 – 9.2.2: See below.
• Mac OS X: See page 10.
Mac OS 8.6 – 9.2.2
1Double-click the “Mac OS 9” folder on the CD-
ROM.
2Double-click the “USBdrv_” folder on the
CD-ROM.
3Double-click “Install USB MIDI Driver.”
The “Install USB MIDI Driver” window appears, as shown
below.
Normally there’s no need to set the Install Location,
because the startup disk is selected by default. To select
another disk, click the [Switch Disk] button.
Although you can select a destination folder from the
pop-up menu, the files are installed in the specified disk’s
System Folder regardless, so you can ignore that option.
4Click [Install], and follow the on-screen
instructions to install the software.
5When the installation is complete, click [Restart].
Macintosh Installation
NOTE: Adobe Reader is not required if you’re using Mac OS X.
NOTE: If you are planning to use only Studio Manager, you do not
need to install OMS. Install OMS to use MIDI applications other
than Studio Manager.
NOTE: Once the installation is complete, you may receive an
error message warning that the installer did not quit. In this
case, choose [Quit] from the [File] menu to quit the installer,
then restart your computer.
NOTE: This USB MIDI driver is required for MIDI
applications other than Studio Manager. Studio Manager
supports Mac OS X 10.2 or later, but not earlier. To use Studio
Manager, install the USB MIDI driver for Mac OS X.
Computer
USB cable
Studio
Manager
Yamaha
mixing console
Driver

Studio Manager V2 Installation Guide (for DM2000/02R96/DM1000/01V96)
10
Mac OS X
1Start your computer, then log in as Administrator.
To confirm that the Administrator account is available,
select [System Preferences], then [Users (Account)].
2Double-click the “Mac OS X” folder on the CD-
ROM.
3Double-click the “USBdrv_” folder.
4Double-click “USB-MIDI Driver v1. *****.mpkg”
(***** represents the version number).
An “Authenticate” window opens, prompting the
password.
If the window does not prompt you to enter the password,
click the lock icon.
5Enter the password for the Administrator’s
account. If you have not set the password, click
[OK].
The “Welcome to the YAMAHA USBMIDI Driver
Installer” window is displayed.
6Click [Continue].
The “Select a Destination” is displayed.
7Select a destination for the driver installation,
then click [Continue].
A window opens, displaying the message “Click install to
perform a basic installation of this software.”
The message “Installing this software requires 100MB of
disk space” may appear. However, the actual required free
disk space is specified in the “Macintosh System
Requirements” on page 6.
8Click [Install].
If the driver has already been installed, the [Upgrade]
button is displayed instead of the [Install] button.
The driver is installed, and message “The software was
successfully installed” is displayed.
9Click the [Close] button.
The driver installation is complete.
You can check the following locations to confirm that the
driver has been installed:
• Library -> Audio -> MIDI Drivers -> YAMAHA-
USBMIDIDriver.plugin
• Library -> PreferencePanes -> YAMAHA-
USBMIDIPatch.prefPane
NOTE: Before installing the driver, disconnect any USB devices
(other than the keyboard and mouse) from the computer.