Yamaha MSR400 User manual

MSR Series
MSR400 MSR250
•Bi-amplified 12-inch cone type woofer and 1.75-inch
high-frequency horn driver deliver total output power of
up to 400 watts (LF: 300 watts, HF: 100 watts burst; 300
watts continuous total).
•Three balanced input connectors: XLR-3-31, XLR-3-32,
and phone.
•Input level range is from -36 dB to +4 dB accepts output
from your mixer as well as microphones, synthesizers, or
other electronic musical instruments.
•Input level adjustment and a two-band equalizer.
•35mm tripod stand mountable and 8-mm threaded holes
facilitate wall or ceiling mounting.
All-in-one sound solutions that are powerful, versatile, and reliable.
•New class D amplifier delivers 250 watts via a 10" cone
woofer and 1" titanium-dome compression driver.
•Oversized 2.5" woofer voice coil with ferrofluid cooling
for superior sonic performance and durability.
•Asymmetrical cabinet design plus acoustic insulation
eliminates internal standing waves for pure, precise
output.
•Dual inputs with independent EQ and level controls.
•Link out jack allows connection of multiple units for
greater power and coverage.
•The ideal expansion speaker for the STAGEPAS 250M
compact sound system.
MSR250
MSR400 Rear Panel MSR250 Rear Panel
OPTIONS
BCS251
Ceiling Bracket
BWS251-400
Wall Bracket
BBS251
Baton Bracket
MSR400

MSR250
GENERAL SPECIFICATIONS
MSR400
GENERAL SPECIFICATIONS
SPEAKER SECTION
AMPLIFIER SECTION
Type
Frequency response
Nominal coverage
Components
Output power
Maximum output level (1m; on axis)
Processors
Line input and output connectors
Power requirements
Power consumption
Dimensions (W x H x D)
Weight
Flying and mounting hardware
Pole socket
Accessories
2-way powered speaker
-10dB: 50Hz to 20kHz
H: 90°
V: 40°
LF: 10" cone
HF: 1" voice coil compression driver
200W
116dB SPL
Equalizer (LOW: +/13dB at 60Hz, HIGH: +/-6dB at 10kHz)
INPUT 1: XLR-3-31 type/Phone jack(Balanced)
INPUT 2/3: Phone jack/RCA pin(Unbalanced),
LINK OUT: Phone jack
100V, 110V, 120V, 220V, 230V or 240V; 50/60Hz
40W
342 x 544.5 x 298mm (13" x 21-1/2" x 11-3/4")
14.1kg (31-1/8lbs)
2x M8-25
35mm (1-3/8 inch) to 36mm
Owner's manual, AC cord
Type
Crossover frequency
Frequency response
Max. SPL
Dispersion
Dimensions (W x H x D)
Weight
Pole socket
Bi-amp 2-way, bass-reflex type powered speaker
1.6kHz
50Hz to 20kHz
121dB (1m)
90(H) x 40(V)
406 x 652 x 351mm (16.0" x 25.7" x 13.8")
23.0kg (50.7lbs)
35mm (1-3/8 inch) to 36mm
Enclosure
Components
Bass-reflex type
LF: 12" cone + HF: 1.75" driver
Output power
Input sensitivity, impedance
Connector (Input/Output)
(all parallel)
Control
Indicator
Power consumption
LF: 225W @ 500Hz,THD = 1%, RL = 4Ω
HF: 75W @ 5kHz,THD = 1%, RL = 16Ω
MIC/LINE: -36dB/+4dB, 10kΩ
1: XLR-3-31 balanced
2: XLR-3-32 balanced
3: PHONE balanced
Level Control
EQ.LOW (+/- 3dB at 55Hz)
EQ.HIGH (+/- 3dB at HF)
Power Switch (ON/OFF)
Power: Green LED
Clipping: Red LED
110W
150
406 351
652 197
2-M8 depth 17
342
544.5
120
152
2-M8 x 25
298
Tripod pole diameter 35-36 mm
* Use of the stand should refer to
stand manufactu rer s instructions.
’
DIMENSIONS
DIMENSIONS
unit : mm
unit : mm