Yamax POWER WALKER PW-610 User manual

PW-610/611 INSTRUCTION MANUAL
POWER WALKER
TM
‑１‑
3 directions accelerometer (3D)
sensor is mounted and monitor
every steps you take.
3D SENSOR
3D
Wide and Easy to ready LCD
shows your walking record and
data.
DUAL DISPLAY
DUAL
LCD
The PW sensor measures Number
of Steps and calculate Burned
Fat Weight in case of high pitch
aerobics walking(Power Walking
Mode). (g:PW-610 / oz.:PW-611)
WALKING
POWER
POWER WALKING
The Records of Number of Steps
and Consumption Calorie are
automatically saved every day
up to 7 days ago.
7DAYS MEMORY
DAYS
7
24 hours system clock.
Measures the Speed covered
while walking or jogging from
0.0 meter/minute or 0.0 mph to
999.9 meter/minute or 999.9 mph.
(meter/minute:PW-610 / mph:PW-611)
Measures the Time covered
while walking or jogging from
0H 00M to 23H 59M.
ACTIVITY TIME
Measures the Number of Calorie
burned while walking or jogging
from 0.00 to 9999.9 kcal.
Measures the Distance covered
while walking or jogging from
0.00 km or 0.00 mile to 999.99 km
or 999.99 miles. (km:PW-610 / mile:PW-611)
Counts the Number of Steps
taken while walking or jogging
up to 99999 steps.
1. FUNCTIONS
-
-
Sensor 3D Accelerometer Sensor
Display 5-Digit Dual LCD
Display Item Number of Steps: 0 to 99999 steps
Walking Distance: 0.00 to 999.99 km (999.99 mile)
Calorie: 0.00 to 9999.9 kcal
Activity Time: 0H 00M to 23H 59M
Walking Speed: 0.0 to 999.9 m/min
(0.0 to 999.9 mph)
7 Day Memory: Steps and calorie (each 7 days)
Power Walking Number of Steps: 0 to 99999 steps
Activity Time: 0H 00M to 23H 59M
Body Fat Burning: 0.0 to 9999.9 g
(0.0 to 999.9 oz.)
Step Counter Accuracy +5 % (YAMAX regulation)
Clock Time Accuracy +30 seconds / month (normal usage)
Material ABS Resin
Size 48.8 x 70.7 x 14.4 mm
(1.92 x 2.78 x 0.57 inch H x W x D )
Weight in bulk 34 g (1.2 oz.) including the battery
Battery CR2032 battery ＊Life time will be 1 year
FEATURES
2. SPECIFICATIONS
STEP
mile
kcal
W.Time H
mph
M
For PW-611
STEP
km
kcal
m/min
MW.Time H
For PW-600
Upper Display
Number of Steps
Distance
Calorie
Walking Time
Lower Display
Clock
Walking Speed
Normal mode
STEP
POWER
W.Time H
oz.
M
For PW-611
STEP
M
g
POWER
W.Time H
For PW-600
Upper Display
Number of Steps
(in PW mode)
Lower Display
Walking Time
(in PW mode)
Burned Fat Weight
POWER WALKING (PW) mode
DISPLAY DESCRIPTION
Please press MODE button to display each item.
3 directions accelerometer (3D) sensor
monitor your walking and store the record
in Memory.
3. HOW TO USE POWER WALKER
You can use POWER WALKER in pocket
but do not use in back pocket, this may
cause the damage to your product.
Please do not expose in 45 degree as
illustrated. 3D sensor cannot monitor the
activity.
STEP
STEP
Display Side
Display Side
45Degree
45Degree
STEP
g
POWER
STEP
M
POWER
W.Time H
STEP
M
POWER
W.Time H
STEP
W.Ti me H M
POWER
4. POWER WALKING mode
In Power Walking (PW) mode, The PW
Sensor measures the Number of Steps
and calculate Burned Fat Weight in grams
(or ounces). PW sensor only catch high
pitch walking that is faster than 110 steps
per minutes and considered as aerobics
exercise.
1)To start PW mode
Press POWER WALKING blue button
and make sure "POWER" is displayed
in right upper display. If you need PW
data, please do not change to Normal
Mode (just keep Display in PW mode.
"POWER" should be in upper display).
Even during PW mode, normal walking
records are monitoring.
2)How do you know Walking data
in PW mode
Upper Display shows Number of Steps
in PW mode. Lower Display shows Walking
Time in PW mode.
3)Reset PW record
Press RESET button for 2 seconds in
PW mode to clear all PW record.
Press POWER WALKING blue button
once. Lower Display shows Burned Fat
Weight in gram (or ounce).

PW-610/611 INSTRUCTION MANUAL
POWER WALKER
TM
‑２‑
5. HOW TO DO INITIAL SETTING
Time Setting 0:00 to 23:59 (24 Hours Display)
Stride Length 30 to 180 cm (each 1 cm) ＊for PW-610
1.00 to 6.00 feet (each 0.25 feet) ＊for PW-611
Body Weight 30 to 120 kg (each 1 kg) ＊for PW-610
70 to 300 lb (each 1 lb) ＊for PW-611
Please do not forget setting date before
you using POWER WALKER .
SETTING DATA
TM
1)Time setting
Press "■/SELECT" button (keep press
for more than 2 second)
"Hour" blinking
Press ▲button to increase or ▼button
to decrease data.
Press "■/SELECT" button
"Minute" blinking
Press ▲button to increase or ▼button
to decrease data.
Press "■/SELECT" button
2)"Stride Length" blinking
(*Stride Length setting)
Press ▲button to increase or ▼button
to decrease data.
Press "■/SELECT" button
3)"Body Weight" blinking
(Body Weight setting)
Press ▲button to increase or ▼button
to decrease data.
4)Press MODE green button when you
finish initial setting.
SET
SET
SET
SET
First of all, please make sure Display shows
Normal Walking mode (not PW mode nor
7 DAYS Memory mode).
SETTING PROCEDURES
*Stride Length setting
For measuring the distance coverage,
it is important to keep regular strides and
maintain your walking form. To determine
your average stride length, please walk
10 steps as illustrated below. Then please
measure distance (toe to toe) of your 10
steps and divide distance by10. You can
calculate your average one step (stride
length).
1)Auto Memory and Reset
The Number of Steps and Consumed
Calorie of the day are automatically stored
in memory device in Power Walker
at 2:00 am every day up to 7 days ago.
So at 2:00 am, Display shows zero(0).
2)How to Recall the 7 Days Records
Please press MEMORY button first in
Normal Walking mode. Display shows
The Number of Steps and consumed
calorie of the previous day (One(1) day
ago). To continue recall records of each
day, press ▲/RESET button or ▼/MEMORY.
6. 7 DAYS MEMORY
STEP
dayagokcal
STEP
km
kcal
dayagokcal
MW.Time H POWER
STEP
dayagokcal
STEP
dayagokcal
....
STEP
km
kcal
dayagokcal
MW.Time H POWER
STEP
dayagokcal
STEP
dayagokcal
....
STEP
kcal dayago
7. BATTERY CHANGE
Battery life time is approx 1 year.
You can purchase replacement battery
CR2032 at grocery store, electronic retail
shops, etc.
Please use coin to open battery case and
change battery. Please make sure that
Plus(+) side is facing up.
BATTERY CR2032
MADE IN JAPAN
Battery Case
Battery(CR2032)
8. RESET
1)Manual Reset
If you want to clear record of the day,
please press ▲/RESET button for approx
2 seconds until display shows zero(0)
in Normal Walking Mode or PW mode.
2)Auto Reset
At 2:00 am every day, the data of Number
of Steps and Consumed Calorie are
automatically saved in Memory Device
in POWER WALKER. Then display shows
zero(0).
3)System Reset
When you want to delete all personal data
and walking record and to be in factory
default mode,
please put small stick
in RESET whole
and push button
on the back case.
Push
BATTERY CR2032
MADE IN JAPAN
When unusual segment or irregular item
is displayed due to electric trouble.
Right after changing battery.
We strongly recommend you do this System
Reset operation only -
After you complete system reset procedure,
please start initial setting. (showing in
HOW TO DO INITIAL SETTING)
Please treat your products with care and
keep it in a clean place.
Please do not put your product in back
pocket.
Please do not open the case. There are
sensitive mechanism inside.
POWER WALKER is not water resident,
please do not expose your product to
liquid or moisture or humid place.
Please do not expose your product to
extreme high or low temperature place.
Please do not throw and drop your product.
CAUTION
Please do not throw your product into the
fire or explosive area. Your product may
explode.
Please keep your product and accessories
incl. battery out of the children's reach.
Please keep your product and accessories
incl. battery out of your pet's reach.
If your product or the battery is accidentally
swallowed, please contact doctor immediately.
For disposing the battery, Please check
local regulation and follow their direction.
WARNING
9. IMPORTANT INFORMATION

PW-610/611 INSTRUCTION MANUAL
POWER WALKER
TM
‑３‑
10. WARRANTY CONDITION
YAMAX provides this limited warranty
for your POWER WALKER and original
accessory delivered with your product.
If you need warranty service, please
contact retailer or distributor from whom
you purchased with the proof of purchase.
This limited warranty period is one(1)
year from your purchase date.
During the warranty period, your product
fails to operate under normal use,
YAMAX or YAMAX authorized distributors
provide you free repair or replacement
in the country or region where you
purchased.
YAMAX or YAMAX authorized distributors
reserve the right charge a handling fee
if returned products is found not to be
under warranty conditions like user drop
your products, LCD display is broken
by pressure by user, defect by dust, wet,
damage and reassembled by user.
Warranty does not cover your products
failures which have been caused by user.
Warranty does not cover the battery.