YEECORE H22 User manual

H22 Dual Dash Cam
User Manual



Warm Tips

Turn off the camera before inserting and removing the micro SD card
Format SD card on the camera before first use
Use brand name high speed U3 SD card
Parking monitor function can only be activated with Yeecore hardwire
kit (need purchase separately)

Free 6 Months Extended Warranty
We offer 12 months warranty from the date of purchase.
You can register on our official website with order number to extend
the warranty to 18 months:
https://www.yeecoreshop.com/account/sign-up.html
Contact Us
If any question regarding your product, please feel free to contact us,
we will reply soon.
Official website: https://www.yeecoreshop.com
Email: [e-mail]

Content

1
1. Package Includes
⑥Crowbar×
①Front Cam× 1
③USB Cable×
②Mount × 1
④Rear Cam× 1
1
1
⑨Cigarette Charger Cable ×
⑤Rear Cable× 1
1
（Approx 11.5 ft）
⑩User Manual ×
⑧
⑦Clip×6 Electrostatic film×2
1

2
2. Product Details
Front Cam
Front
Mount Connector
Connect to the mount
Lens
Remove the protective film before
using
Speaker
Deliver sound during video playback
Back
3. 0 Inch HD LCD Screen
Power Light
Steady Red Led: camera is powered On
Recording Light
Steady Blue Led: In standby status
Blinking Blue Led: camera is recording
Power button
Top Power ON/OFF;
Manually locks the currently
recording video clip to start 1 minute
emergency recording
Type-C USB port / Rear Cam Port
Connect to cigarette charger
cable or rear cam’s cable

3
Bottom
Microphone
Record audio
Reset button
Resets the dash cam and
restore default settings.
Side
Micro SD Card Slot
Support up to 512GB U3 or higher SD card
card not included in the box
Buttons
▲Up Button
Move selector up; Switch the Front and Rear cam’s display;
Hold more than 5 seconds to enter cam’s WiFi;
Fast forward when playing back vide
MODE Button
Enter /Exit setup menu
o
▼Down Button
Move selector down;Turn on/off Microphone;
Cancel fast forward when playing back video
OK Button
Stop / Start recording; Confirm the action
OK

4
3. Install / Remove Micro SD card
Reminder:
1. Please use a genuine Micro SD memory card from 8GB to 512GB
with a speed rating of U3 or higher.
2. Please don’t use SanDisk or Transcend SD card on the camera,
we recommend use Samsung SD card (not included).
3. Make sure the camera is OFF before inserting or removing
the SD ca rd, do not remove the card when the camera is recording in
case video files missing.
4. Ensure format the SD card on the camera (not on PC) before first
use.
5. After inserting the SD card, if the screen prompts “Card error” ,
please press the Mode button to enter Menu-- Settings--System
Setup--Format--OK, to format the SD card on the camera.
6. We suggest format the SD card every 2-3 months.
How to insert a Micro SD memory card?
1. Turn off the camera.
2. Align the memory card’s golden contacts facing toward the screen
of the camera.
3. Insert the memory card halfway into the camera’s card slot, then
push the memory card all the way inward using your fingernails or
paper clips until it clicks and locks in place.

5
4. Install the camera
1. On the windshield select the installation position where the mount
is attached.
2. Clean the windshield using water or alcohol, wipe it with a dry
cloth.
3. The electrostatic stickers with two-sided protective film. Peel off
the bottom side protective film from the electrostatic sticker. Attach
the electrostatic sticker in the selected position on the windshield.
4. Attach the mount to the front camera’s mount connector, then
push it in until the mount be installed.
5. Peel off the upper side protective film from the electrostatic
sticker. Remove the protection film of the 3M tape on the mount,
then fix the mount and camera on the electrostatic sticker.

6
8. Plug the car charger into your vehicle’s cigarette lighter port, twist
the car charger to power it on
6. Adjust the angle of the mount according to actual needs, tighten
the nut to fix the camera.
7. Connect the rear cam cable and car charger cable in the below
way:
.
Car charger cable
Rear cam cable

7
9. Select position on the rear windshield to install the rear cam. We
suggest not install the rear cam near the radio antenna, so as not to
affect the radio effect. Also avoid the defogging line on the rear
windshield, so as not to affect the video effect.
10. Clean the rear windshield, stick the electrostatic sticker in the
selected position, remove the protection film of the sticky pad, fix the
rear cam in the selected position, ensure the "YEECORE" logo on
the rear cam facing inside the vehicle, and the logo is on the left (not
on the right), to avoid mirrorimage; Also the logo can not be
reversed, to avoid picture be upside down. Then use the rear camera
cable to connect the rear camera with the front camera.

8
11. You can hide the car charger cable and rear cam cable with the
crowbar and cable clips in the package.
12. Scan the QR code to view installation video on YouTube.

9
5. Set up the camera for the first time
1 . Confirm the Micro SD card is inserted in the front camera
2 . Turn on the cam , Set up Language
Press the Down button to choose the language you prefer, then
press the OK button to confirm.
3 .DO Set up you local Time Zone / DST before setting up time

10
4 . Set up Clock Format: 24 Hours / 12 Hours
5 . Set up Time & Date
6 . Format the SD card
Choose OK to format the SD card before starting recording.
7. 1 When the orange light icon is blinking, the cam is recordin
7 . Set up successfully , start recording
g
Recording

11
7.2 Press the OK button to stop recording, then the orange light will
be changed to camera icon.
Stop recording
7.3 When in recording, the screen will automatically go into
screensaver mode after 3 minutes. You can press any button to quit
the screensaver interface.
Press OK button

12
6. Download APP
Android
1. Open "Google Play"
2. Search for "YeecoreViewer"
App then download and install
in your phone
iP ho n e /iP ad
1. Open the "App Store"
2. Search for "YeecoreViewer"
App then download and install
. in your phone.
Note: the GPS track playback and video sharing functions depend
on the internet or telecom value-added services, needs turn off
/disconnect the camera WiFi.

13
Tips: If on your iPhone it shows "no internet connect", just ignore it;
7. WiFi and APP Connection
Step 1: Turn Off VPN and Anti-virus software on your phone.
Step 2: Place your phone close to the camera, distance must be
Step 3: Power on dash cam, Hold “ Up” button until enter cam's Wi-
Fi interface.
If on your Android phone it shows "Connected without internet", just
ignore it.
less than 32.8 feet ( 10 Meters
Step 4: In your phone's setting--WiFi-- find “Yeecore_ xxxxxx” .
Click it and enter default password 12345678 to connect.
)

14
If on your iPhone it shows authorization needed to connect your
local network, click "Allow / Accept".
If on your Android phone it shows a message like "Internet may not
be available", click "Stay connected" or "Keep WLAN connection".
Step 6: After connected, DO NOT operate in the dash cam
(otherwise it will result in exiting Wi-Fi), if you need adjust any
setting, do it on the APP.
Step 5: Quit phone's setting, back to mobile phone homepage, wait
for 1-2 minutes, open APP “YeecoreViewer”, you will notice "Wi-Fi
Enable" shown up, now click "Enter Cam", your phone be connected
with the camera successfully.

15
If you use iPhone and the camera cannot be connected, please try
this way: In iPhone’s Setting --Find “YeecoreViewer” -- WLAN and
Cellular Data--Turn Off Cellular Data and turn On WLAN.

16
Scan the QR code to view WiFi connection video on YouTube
Attention:
1. If you do not connect to WiFi before opening the APP, the APP
will prompt you by saying "Please connect to WiFi first", and will
automatically back to the WiFi settings. Please complete the steps
to connect to WiFi first.
2. If the WiFi is already connected, but the APP backs to the
application permissions of the APP after selecting the model, please
check whether the wireless network permission of the APP is
turned on.
3. The initial password for this device is only used for initial login. In
order to prevent potential security risks, please change the initial
password in this way: After connected and entered the APP, click
the Setting icon on the top right corner, you can find "WiFi" in
Setting--System Setting, then enter a new password.
4. If you forget the WiFi password, you can restore the default
setting of the device, and the Wi-Fi password of the device will also
be restored to the default password (12345678).
: