Yellobrik RXT 1001 User manual

This mounting bracket and holder can be installed on the RFR 1200 and can
accommodate one RPS A100/ RPS 1120 external power supply. Use two RXT
1001 power supply holder to secure the main and redundant external power
supplies.
RXT 1001 Power supply holder for RFR 1200
Technical Specications
Size 447mm x 103.35mm x 44mm (17.6in x 4.07in x 1.73in)
Weight 380g (13.4oz)
Model # RXT 1001 ( EAN# 4250479327962 )
Includes 1x power supply holder, 1x mounting bracket, 4 screws
RXT 1001
Power Supply Holder for RFR 1200
We are constantly adding more yellobrik modules.
Please visit our website for the latest product updates.
www.lynx-technik.com
Power Supply Holder “L“ Shape Bracket
yellobrik
®
Quick
Reference
yellobrik
®
LYNXTechnik AG | www.lynx-technik.com
Brunnenweg 3, D-64331 Weiterstadt, Germany

Description
Step 4: Unlock and slide over the power supply support clip
Step 5: Insert the power supply in the power supply holder
Mounting a module in the bracket
RXT 1001, a power supply holder for RFR 1200 yellobrik rack frame, can
simplify cable management by securing the external power supply and
making the installation neat.
RXT 1001 can secure one RPS A100 (RPS 1120) power supply. The RFR
1001 is a mounting bracket for any single yellobrik module.
The RXT 1001 consists of two parts: Mounting Bracket and Power
supply holder.
Lock the power supply support clip by pushing it inwards again. Try to
move the module to ensure the t is secure. No tools are required to
insert and remove a power supply module from the bracket.
Step 3: Secure RXT 1001 on RFR 1200 using the screws obtained in Step
1.
Step 2: Secure RXT 1001 mounting bracket with power supply holder as
shown in the picture
Step 1: Unscrew and dismount the existing bracket on an RFR 1200 rack
frame. Keep the screws as they would be needed in the next steps.