YOKOGAWA DLM4000 Series User manual

User’s
Manual
IM 701969-02EN 1/2
3rd Edition
3rd Edition : September 2020 (YMI)
All Rights Reserved, Copyright © 2013 Yokogawa Test & Measurement Corporation
*IM 701969-02EN/3*
Model 701969-E
Rack Mounting Kit (EIA compliant)
1. Checking the Parts in the Kit
Confirm that all parts listed below are included in the kit. If some of the contents are missing or if there is
physical damage, please contact your nearest YOKOGAWA dealer.
List of parts included in the kit.
• Rack frames (2pcs)
• Upper bracket (1pcs)
• M4 binding screws (length: 12 mm) (8pcs)
2. Joining the Instruments with Mounting Hardware
1. Remove sealing label (a) from the left and right sides of the instrument (6 labels).
2. Attach the rack frames (A) to the left and right sides of the instrument with three screws (B) on each rack
frame.
 Referencetorquevalue:1.3to1.4N∙m
3. Attach the upper bracket (C) to the upper of the instrument with two screws (D).
 Referencetorquevalue:1.3to1.4N∙m
(a)
(a)
(a)
(a)
(a)
(a)
D
B
B
A
C
B
D
B
B
A
B

IM 701969-02EN 2/2
3. Mounting the Joined Instruments to the Rack
Dimensions after mounting to the rack are illustrated below.
DLM4000
460.2 (18.12)
28.3 (1.11)
426 (16.77)
28.3 (1.11)
310.4 (12.22)
88.9 (3.50)
57.2 (2.25)
88.9 (3.50)37.7 (1.48)
7 (0.28)
2.5 (0.10)
18 (0.71) 183 (7.20)
Unit: mm
(approx. inch)
DLM5000
460.2 (18.12)
28.3 (1.11)
426 (16.77)
28.3 (1.11)
20 (0.79) 183 (7.20)
310.4 (12.22)
88.9 (3.50)
57.2 (2.25)88.9 (3.50)37.7 (1.48)
7 (0.28)
2.5 (0.10)
Unit: mm
(approx. inch)
Note
• Be sure to support the instrument from the bottom.
• Provide a clearance of at least 100 mm around the instrument to prevent the temperature rise inside the instrument.